JNZSR0194Bluetooth Speaker

English Read Manual Before Product Use. WARNING! FIRE & ELECTRIC SHOCK HAZARD: RISK OF FIRE OR ELECTRIC SHOCK WHICH MAY RESULT IN PERSONAL INJURY OR DEATH. Use as instructed. Safe Usage Guidelines for Products –Install in accordance with the manufacturer’s instructions. –Maintain a minimum distance of at least 6 inches (15 cm) around apparatus for sufficient ventilation. –Do not block any ventilation openings. –Ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table clothes, curtains, etc. –Do not push objects into apparatus vents or slots. –Place apparatus in a stable location. –No naked (open) flame sources, such as lighted candles, should be placed on or near the apparatus. –Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. –Do not defeat the safety purpose of the polarized plug. A polarized plug has two blades with one wider than the other. The wide blade is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. –Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. –Only use attachments/accessories specified by the manufacturer. –Use the product with listed/certified ITE computers and accessories. –Connect power supply or power cord to a properly wired and grounded electrical outlet. –Unplug this apparatus during lightning storms or when unused for long periods of time. –Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power- supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. –The apparatus shall be disconnected from the mains by unplugging the power cord of the apparatus from the AC mains receptacle. –The socket-outlet shall be installed near the equipment and shall be easily accessible. –This is not a Children's Product and is not intended for use by children under 14 years old. –Not intended to be installed for permanent use in an outdoor location. POWER SUPPLY WARNING! The power supply is for indoor use only. Only use the power supply included with your product. Do not attempt to repair or use a damaged power supply. Do not immerse the power supply in water or subject it to physical abuse. Inspect the power supply regularly for cable, plug, and casing damage. This product is intended to be supplied by a Listed/Certified power supply, rated 5 Vdc, 3 A minimum, Tma (maximum ambient temperature) 40 degree C and altitude 5000 m. If needed, please contact the Manufacturer for further information. BATTERY WARNING!: Improperly replaced batteries may present a risk of leak or explosion and personal injury. Risk of fire or explosion if the battery is replaced by an incorrect type. Ensure batteries are installed correctly by following the instructions provided. Mistreated rechargeable batteries may present a risk of fire or chemical burn. Do not disassemble or expose to conducting materials, moisture, liquid, or heat above 54° C (130° F). A battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas. Do not use or charge the battery if it appears to be leaking, discolored, deformed, or in any way abnormal. Do not leave your battery discharged or unused for extended periods. Do not short circuit. Your device may contain an internal, rechargeable battery that is not replaceable. Battery life varies with usage. Non-operational batteries should be discarded according to local laws. If no laws or regulations govern, dispose of your device in a waste bin for electronics. Keep batteries away from children. Warning! A wet or contaminated USB-C connector may cause excessive heat or melting and may lead to fire damage or personal injury. Always charge your speaker with a clean, dry USB-C connector. Warning! Exposure to noise above 85 decibels for long periods may cause hearing damage. Protect your hearing by establishing safe volumes. Logitech Compliance. The product complies with all applicable requirements for Restriction of Hazardous Substances (RoHS) and Waste Electronic and Electrical Equipment (WEEE). For Product Safety, EMC, RF, Energy, RoHS and WEEE information, go to www.logitech.com/compliance. Maintenance is not required for product compliance. Packaging, batteries, electronic and electrical equipment and their accessories should not be disposed of with household waste. Wherever possible, they should be segregated and brought to an appropriate collection point to enable recycling and avoid potential impacts on the environment and human health. For more information, contact your local authorities or place of purchase, or visit www.logitech.com/recycling. FCC statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates , uses and can radiate radio frequency energy. And, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turnin…

Text truncated - open the document above for the full version.

GET TO KNOW YOUR EPICBOOM APPRENDS À CONNAÎTRE TON ENCEINTE EPICBOOM USO DE EPICBOOM 620-012224 003 CHARGE YOUR SPEAKER CHARGER TON ENCEINTE CARGA TU BOCINA Lift the weather door to charge using the USB-C cable. Soulève le capot du compartiment étanche pour charger ton enceinte à l'aide du câble USB-C. Abre la tapa protectora para cargar la bocina mediante el cable USB-C. WATERPROOF WARNING: Weather door must be closed to be waterproof IP67. AVERTISSEMENT D'ÉTANCHÉITÉ: le capot étanche doit être fermé pour bénécier de l'étanchéité IP67. ADVERTENCIA SOBRE LA RESISTENCIA AL AGUA: La tapa protectora debe estar cerrada para ofrecer resistencia al agua IP67. Short press to power ON/OFF. Pression courte = MARCHE/ARRÊT. Pulsación corta para encender/apagar. Short press to switch OUTDOOR BOOST on/off. Pression courte pour activer/désactiver le MODE PLEIN AIR. Pulsación corta para activar/desactivar el MODO OUTDOOR. Press and hold to pair. Maintiens appuyé pour coupler. Pulsación mantenida para emparejar. Short press to play/pause. Double or triple press to skip or rewind. Long press to use MAGIC BUTTON to control your music. Appuie brièvement pour lire et mettre en pause. Appuie deux ou trois fois pour ignorer la piste ou revenir en arrière. Pression longue pour utiliser le MAGIC BUTTON pour contrôler ta musique. Pulsación corta para reproducir/poner en pausa. Pulsación doble o triple para omitir o rebobinar. Pulsación larga para usar MAGIC BUTTON para controlar la música. Touch “N” to connect with an NFC-compatible device* or switch to another user. Appuie sur "N" pour connecter un dispositif compatible NFC* ou changer d'utilisateur. Toca “N” para conectar un dispositivo compatible con NFC* o cambiar de usuario. *NFC-compatible smartphones with Android 8.0 or later *Smartphones compatibles NFC sous Android 8.0 ou une version ultérieure *Smartphones compatibles con NFC con Android 8.0 o posteriores Short press any buttons to see the power indicator. Short press “+” or “-” to increase / decrease volume. Pression courte sur n'importe quel bouton pour afcher le témoin d'alimentation. Pression courte sur "+" ou "-" pour augmenter / diminuer le volume Pulsación corta con cualquier botón para ver el indicador de alimentación. Pulsación corta "+" o "-" para aumentar/reducir volumen DOWNLOAD APP TÉLÉCHARGER L'APPLICATION DESCARGA LA APLICACIÓN Download the ULTIMATE EARS BOOM app to explore the other great features such as Remote Power ON/OFF, Equalizer, PartyUp and using Magic Button to set up your playlists. For a full user guide,visit MY.ULTIMATEEARS.COM/EPICBOOM. Télécharge l'application ULTIMATE EARS BOOM pour découvrir d'autres fonctionnalités exceptionnelles telles que la fonction MARCHE/ARRÊT à distance, l'égaliseur, PartyUp et le Magic Button pour congurer tes playlists. Pour obtenir le guide de l'utilisateur, rendez-vous sur MY.ULTIMATEEARS.COM/EPICBOOM. Descarga la aplicación ULTIMATE EARS BOOM para explorar otras magnícas funciones, como las de encendido y apagado remoto, Ecualizador, PartyUp y uso de Magic Button para congurar tus playlists. La guía del usuario completa se encuentra en MY.ULTIMATEEARS.COM/EPICBOOM. USE SOY OR VEGETABLE INKS Project Date File Name P/N Inks Puccini EpicBoom (QSG Insert) 12 March 2023 UDOC_2794 - PDM-620-012224 003 UE Puccini EpicBoom QSG AMR 23 - 326.ai 620-012224 Rev 003 Dieline DWS-620-012224 Finish N/A Print size Trim size 145mm x 195mm 145mm x 195mm Fonts News Gothic Std Black Dieline (does not print)

D ate: 2023-05-04 F CC ID: JNZSR0194 To t he attention of Federal Communications Commission Authorization and Evaluation Division A ttestation Statements A ttestation Statements Part 2.911(d)(5)(i) Filing LOGITECH FAR EAST LTD. (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. A ttestation Statements Part 2.911(d)(5)(ii) Filing LOGITECH FAR EAST LTD. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. S incerely yours, --- -------------------------------------------- Paul Zahra / Senior Manager, Compliance Engineering LOGITECH FAR EAST LTD. Tel: +1-510-713-5436 E- mail: [email protected]

Date: 5/4/2023 Federal Communications Commissions Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 RE : CFR 47 §2.911 (d)(7) FCC US Agent Letter of Attestation FCC ID: JNZSR0194 To w hom it may concern: F CC US Agent Agent Company Name: Logitech, Inc. FCC FRN: 0005921077 Agent Contact Name: Paul Zahra Agent US Address: 3930 North First Street, San Jose, California 95134 Agent Email Address: [email protected] Thi s letter is to confirm that we have accepted the responsibility to act as US Agent on behalf of Logitech Far East, Ltd. (“the applicant”) for the above referenced FCC ID. We are aware of the requirements and responsibilities of the applicant’s agent for service of process as outlined in the FCC section 2.911(d)(7) and Report and Order FCC 22-84 paragraph 63. S incerely, Paul Zahra Senior Manager, Compliance Engineering Logitech, Inc.

Date: 5/4/2023 Federal Communications Commissions Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 R E: CFR 47 §2.911 (d)(7) Agent Designation Attestation FCC ID: JNZSR0194 Logi tech Far East, Ltd., (“t he applicant”) as required by section 2.911(d)(7), designates the following agent, located in the United States, for purposes of acting as the applicant’s agent for service of process. The applicant acknowledges that they will maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility under CFR 47 §2.929(c) to inform the FCC whenever the agent information changes. U .S. Agent Information: Contact Person: Paul Zahra Company Name: Logitech, Inc. Company Address: 3930 North First Street, San Jose, California 95134 Email: [email protected] S incerely yours, Name: Rick Lien Job Title: Head of Product Compliance Company Name: Logitech Far East, Ltd. Email: [email protected] Tel: +886-3-5778241 #2189

Date: 02/05/2024 FCC ID: JNZSR0194 To the attention of Federal Communications Commission Authorization and Evaluation Division Attestation Statements Attestation Statements Part 2.911(d)(5)(i) Filing LOGITECH FAR EAST LTD. (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Attestation Statements Part 2.911(d)(5)(ii) Filing LOGITECH FAR EAST LTD. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely yours, ----------------------------------------------- David W Crawford / Senior Manager, Compliance Engineering LOGITECH FAR EAST LTD. Tel: +1-360-817-1253 E-mail: [email protected]

Date: 02/05/2024 Federal Communications Commissions Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 RE: CFR 47 §2.911 (d)(7) FCC US Agent Letter of Attestation FCC ID: JNZSR0194 Applicant (Grantee) FRN: 0007134034 To whom it may concern: FCC US Agent Agent Company Name: Logitech, Inc. Agent FRN: 0005921077 Agent Contact Name: David W Crawford Agent US Address: 4700 NW Camas Meadows Drive, Camas, WA 98607 Agent Email Address: [email protected] This letter is to confirm that we have accepted the responsibility to act as US Agent on behalf of Logitech Far East, Ltd. (“the applicant”) for the above referenced FCC ID. We are aware of the requirements and responsibilities of the applicant’s agent for service of process as outlined in the FCC section 2.911(d)(7) and Report and Order FCC 22-84 paragraph 63. This letter supersedes the previous version for purposes of updating the U.S. Agent contact information due to changes in responsibilities. Sincerely, ______ David W Crawford Senior Manager, Compliance Engineering Logitech, Inc.

Date: 02/05/2024 Federal Communications Commissions Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 RE: CFR 47 §2.911 (d)(7) Agent Designation Attestation FCC ID: JNZSR0194 Applicant (Grantee) FRN: 0007134034 Logitech Far East, Ltd., (“the applicant”) as required by section 2.911(d)(7), designates the following agent, located in the United States, for purposes of acting as the applicant’s agent for service of process. The applicant acknowledges that they will maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility under CFR 47 §2.929(c) to inform the FCC whenever the agent information changes. This letter supersedes the previous version for purposes of updating the U.S. Agent contact information due to changes in responsibilities. U.S. Agent Information: Contact Person: David W Crawford Company Name: Logitech, Inc. Company FRN: 0005921077 Company Address: 4700 NW Camas Meadows Drive, Camas, WA 98607 Email: [email protected] Sincerely yours, ________ Name: Rick Lien Job Title: Head of Product Compliance Company Name: Logitech Far East, Ltd. Email: [email protected] Tel: +886-3-5778241 #2189

LOGITECH FAR EAST LTD. 3930 North First Street, San Jose, California 95134 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality F CC ID: JNZSR0194 To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Theory of Operation Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachments until 180 days after the Grant of Equipment Authorization. External Photos Internal Photos User Manual Test Setup photos I t is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. B est Regards P aul Zahra / Senior Manager, Compliance Engineering LOGITECH FAR EAST LTD. Tel: +1-510-713-5 436 E- mail: [email protected] 05/02/2023

LOGITECH FAR EAST LTD. 3930 North First Street, San Jose, California 95134 Date: 2023-05-04 FCC ID: JNZSR0194 AUTHORIZATION LETTER To Whom It May Concern: LOG ITECH FAR EAST LTD. hereby authorizes Debby Lin / Senior Specialist of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (“BV CPS Taoyuan”), to act on its behalf in all matters relating to the Federal Communication Commission (“FCC”) application for equipment authorization in connection with the FCC ID listed above, including signing of all documents relating to these matters. Any and all acts carried out by Debby Lin / Senior Specialist of BV CPS Taoyuan on LOGITECH FAR EAST LTD.’s behalf, within the scope of the powers granted herein, shall have the same effect as acts of its own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Sincerely yours, ----------------------------------------------- Paul Zahra / Senior Manager, Compliance Engineering LOGITECH FAR EAST LTD. Tel: +1-510-713-5436 E- mail: [email protected]

LOGITECH FAR EAST LTD. #2 Creation Rd. 4, Science-Based Ind. Park Hsinchu Taiwan, R.O.C. Date: 2024-02-16 A U T H O R I Z A T I O N L E T T E R To whom it may concern: I, the undersigned Rick Lien of LOGITECH FAR EAST LTD. hereby authorize David W Crawford of Logitech, Inc. to act on my behalf in all matters relating to all processes required in FCC and any communication needed with the national authority. Any and all acts carried out by David W Crawford on my behalf shall have the same effects as acts of our own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Thank you! Sincerely yours, ----------------------------------- Rick Lien / Head of Product Compliance Tel: +886-3-5778241 #2189 Fax: +886-3-5792394 Email: [email protected]

Reference No.:BDKG-WTW-P23030857_EXT Page 1/7 CONSTRUCTION PHOTOS OF EUT Reference No.:BDKG-WTW-P23030857_EXT Page 2/7 Reference No.:BDKG-WTW-P23030857_EXT Page 3/7 Reference No.:BDKG-WTW-P23030857_EXT Page 4/7 Reference No.:BDKG-WTW-P23030857_EXT Page 5/7 Reference No.:BDKG-WTW-P23030857_EXT Page 6/7 Reference No.:BDKG-WTW-P23030857_EXT Page 7/7

LABEL & Label LOCATION The label will be permanently affixed at a conspicuous location on the device. FCC ID: JNZSR0194 IC: 4418A-SR0194 Top Bottom(Label here)

Reference No.:BDKG-WTW-P23030857_INT Page 1/12 CONSTRUCTION PHOTOS OF EUT Reference No.:BDKG-WTW-P23030857_INT Page 2/12 Reference No.:BDKG-WTW-P23030857_INT Page 3/12 Reference No.:BDKG-WTW-P23030857_INT Page 4/12 Reference No.:BDKG-WTW-P23030857_INT Page 5/12 Reference No.:BDKG-WTW-P23030857_INT Page 6/12 Reference No.:BDKG-WTW-P23030857_INT Page 7/12 Antenna Reference No.:BDKG-WTW-P23030857_INT Page 8/12 Reference No.:BDKG-WTW-P23030857_INT Page 9/12 Reference No.:BDKG-WTW-P23030857_INT Page 10/12 Reference No.:BDKG-WTW-P23030857_INT Page 11/12 Reference No.:BDKG-WTW-P23030857_INT Page 12/12

SAR Test Report Report Format Version 5.0.0 Page No. : 1 of 24 Report No. : SFBDKG-WTW-P23030857 Issued Date : May 12, 2023 SAR Test Report Report No. : SFBDKG-WTW-P23030857 Applicant : Logitech Far East Ltd. Address : 3930 North First Street, San Jose, California 95134 Product : Bluetooth Speaker FCC ID : JNZSR0194 Brand : Ultimate Ear Model No. : SR0194 FCC Rule Part CFR §2.1093 Standards : IEEE Std 1528:2013, KDB 865664 D01 v01r04, KDB 865664 D02 v01r02, KDB 447498 D04 Interim General RF Exposure Guidance v01 Sample Received Date : Apr. 18, 2023 Date of Testing : Apr. 24, 2023 Lab Address : No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location : No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City, Taiwan CERTIFICATION: The above equipment have been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch–Lin Kou Laboratories, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s SAR characteristics under the conditions specified in this report. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by TAF or any government agencies. Prepared By : Lena Wang / Specialist Approved By : Gordon Lin / Manager FCC Accredited No.: TW0003 This report is governed by, and incorporates by reference, the Conditions of Testing as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our- business/cps/about-us/terms-conditions/ and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. Statements of conformity are based on simple acceptance criteria without taking measurement uncertainty into account, unless otherwise requested in writing. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. SAR Test Report Report Format Version 5.0.0 Page No. : 2 of 24 Report No. : SFBDKG-WTW-P23030857 Issued Date : May 12, 2023 Table of Contents Release Control Record ............................................................................................................................................................... 3 1. Summary of Maximum SAR Value ....................................................................................................................................... 4 2. Description of Equipment Under Test ................................................................................................................................. 5 3. SAR Measurement System ................................................................................................................................................... 6 3.1 Definition of Specific Absorption Rate (SAR) ............................................................................................................... 6 3.2 SPEAG DASY6 System ............................................................................................................................................... 6 3.2.1 Robot ............................................................................................................................................................... 7 3.2.2 Probes ............................................................................................................................................................. 8 3.2.3 Data Acquisition Electronics (DAE) .................................................................................................................. 8 3.2.4 Phantoms ......................................................................................................................................................... 8 3.2.5 Device Holder .................................................................................................................................................. 9 3.2.6 System Validation Dipoles ............................................................................................................................. 10 3.2.7 Power Source ................................................................................................................................................ 10 3.2.8 Tissue Simulating Liquids .............................................................................................................................. 11 3.3 SAR System Verification ............................................................................................................................................ 13 3.4 SAR Measurement Procedure ................................................................................................................................... 14 3.4.1 Area Scan and Zo…

Text truncated - open the document above for the full version.

Plots of System Verification Appendix A. Plots of System Verification The plots for system verification are shown as follows. Report No.: SFBDKG-WTW-P23030857 Plots of System Verification Measurement Report S01 System Check_H2450_230424 Device under Test Properties Model, Manufacturer Dimensions [mm] IMEI DUT Type Dipole737, 10.0 x 10.0 x 300.0 Exposure Conditions Phantom Section, TSL Position, Test Distance [mm] Band Group, UID Frequency [MHz], Channel Number Conversion Factor TSL Conductivity [S/m] TSL Permittivity Flat, , 2450.0, 7.89 1.91 39.4 Hardware Setup Phantom TSL, Measured Date Probe, Calibration Date DAE, Calibration Date ELI V8.0 (20deg probe tilt) - 2190 H06T27N7, 2023-Apr-24 EX3DV4 - SN7472, 2022-05-27 DAE4 Sn1698, 2022-11-17 Scan Setup Area Scan Zoom Scan Grid Extents [mm] 48.0 x 96.0 30.0 x 30.0 x 30.0 Grid Steps [mm] 12.0 x 12.0 5.0 x 5.0 x 1.5 Sensor Surface [mm] 3.0 1.4 Measurement Results Area Scan Zoom Scan Date 2023-04-24 2023-04-24 psSAR1g [W/kg] 2.61 2.59 psSAR10g [W/kg] 1.21 1.21 Power Drift [dB] -0.02 -0.01 M2/M1 [%] 78.1 Dist 3dB Peak [mm] 9.0 Report No.: SFBDKG-WTW-P23030857 Plots of Measurement Appendix B. Plots of Measurement The SAR plots for highest measured SAR in each exposure configuration, wireless mode and frequency band combination are shown as follows. Report No.: SFBDKG-WTW-P23030857 Plots of Measurement Measurement Report P01 BT_BR_EDR_Rear Face_0mm_Ch0 Device under Test Properties Model, Manufacturer Dimensions [mm] IMEI DUT Type BDKG-WTW-P23030857, 115.0 x 236.0 x 160.0 Speaker Exposure Conditions Phantom Section, TSL Position, Test Distance [mm] Band Group, UID Frequency [MHz], Channel Number Conversion Factor TSL Conductivity [S/m] TSL Permittivity Flat, HSL Rear Face, 0.00 ISM 2.4 GHz Band Bluetooth, 10032-CAA 2402.0, 0 7.89 1.87 39.5 Hardware Setup Phantom TSL, Measured Date Probe, Calibration Date DAE, Calibration Date ELI V8.0 (20deg probe tilt) - 2190 H06T27N7, 2023-Apr-24 EX3DV4 - SN7472, 2022-05-27 DAE4 Sn1698, 2022-11-17 Scan Setup Area Scan Zoom Scan Grid Extents [mm] 228.0 x 336.0 30.0 x 30.0 x 30.0 Grid Steps [mm] 12.0 x 12.0 5.0 x 5.0 x 5.0 Sensor Surface [mm] 3.0 1.4 Measurement Results Area Scan Zoom Scan Date 2023-04-24 2023-04-24 psSAR1g [W/kg] 0.029 0.032 psSAR10g [W/kg] 0.016 0.016 Power Drift [dB] 0.05 -0.11 M2/M1 [%] 80.7 Dist 3dB Peak [mm] 14.8 Report No.: SFBDKG-WTW-P23030857 Appendix Z. Calibration Certificate for Probe and Dipole The SPEAG calibration certificates are shown as follows. Report No.: SFBDKG-WTW-P23030857 Report No.: SFBDKG-WTW-P23030857 Report No.: SFBDKG-WTW-P23030857 Report No.: SFBDKG-WTW-P23030857 Report No.: SFBDKG-WTW-P23030857 Report No.: SFBDKG-WTW-P23030857 Report No.: SFBDKG-WTW-P23030857 Report No.: SFBDKG-WTW-P23030857 Report No.: SFBDKG-WTW-P23030857 Report No.: SFBDKG-WTW-P23030857 Report No.: SFBDKG-WTW-P23030857 Report No.: SFBDKG-WTW-P23030857 Report No.: SFBDKG-WTW-P23030857 Report No.: SFBDKG-WTW-P23030857 Report No.: SFBDKG-WTW-P23030857 Report No.: SFBDKG-WTW-P23030857 Report No.: SFBDKG-WTW-P23030857 Report No.: SFBDKG-WTW-P23030857 Report No.: SFBDKG-WTW-P23030857 Report No.: SFBDKG-WTW-P23030857 Report No.: SFBDKG-WTW-P23030857 Report No.: SFBDKG-WTW-P23030857 Report No.: SFBDKG-WTW-P23030857 Report No.: SFBDKG-WTW-P23030857 Report No.: SFBDKG-WTW-P23030857 Report No.: SFBDKG-WTW-P23030857 Report No.: SFBDKG-WTW-P23030857 Report No.: SFBDKG-WTW-P23030857 Report No.: SFBDKG-WTW-P23030857

Report No: EVT-700-006351 Page 8of 8 Logitech Antenna Under Test (AUT) Report Model Name: SR0194 Equip…

Text truncated - open the document above for the full version.