JNZVR0004ConferenceCam Connect

Logitech ® Important Information Informations importantes de Logitech ® Safety, Regulatory, and Warranty Consignes de sécurité, informations réglementaires et garantie English 321 45 Battery Disposal Instructions: 1. Disconnect and remove top touch panel 2. Unscrew and remove top ring 3. Remove aluminum cylinder 4. Unscrew and remove back panel 5. Pull out battery to dispose Additional compliance information: http://www.logitech.com/compliance. UL Statement: Your product is UL approved. Use only with UL listed ITE computers. Battery information and Disposal guidelines at product end of life: If the product uses a non-serviceable, rechargeable battery, which should last the duration of a product’s warranty period under normal use. Please do NOT attempt to change the battery yourself. If the battery has died and you do not want Logitech to replace the battery, you should follow the disposal instructions in the documentation that accompanies your product. Also consult local laws and regulations for the proper disposal of batteries and electronic devices in your region. If there are no local regulations concerning electronic waste disposal, place your product (and its battery) in a waste bin for electronic devices. Caution: There is a risk of explosion, fire, or chemical burns if battery is replaced by an incorrect type, mutilated, or exposed to conducting materials, liquid, fire, or heat (above 54° C or 130° F). Do not use or recharge a damaged rechargeable battery. Do not use or charge a battery if it appears to be leaking, discolored, deformed, or in any way abnormal. Do not leave a battery discharged or unused for extended periods of time. Do not mix battery types. When a battery is misused, it may explode or leak, causing burns and personal injury. If a battery leaks, use normal precaution and discard it immediately following the local laws and regulations in your area. Keep all batteries out of the reach of children. FCC – United States and Canada This hardware device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. Compliance Information Statements: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1) Reorient or relocate the receiving antenna. 2) Increase the separation between the equipment and receiver. 3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 4) Consult the dealer or an experienced radio/TV technician for help. Modifications to this product not authorized by Logitech could void your right to use or operate this product by the FCC. Radiation Exposure Statement: This equipment complies with FCC and IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Where shielded interface cables or accessories have been provided with the product or specified additional components or accessories elsewhere defined to be used with the installation of the product, they must be used in order to ensure compliance with FCC regulations. Canada (IC) Statements: Corded products: This Class B digital apparatus complies with Canadian ICES-003. IC statement: CAN ICES-003 (B) / NMB-003 Class (B) This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This Class B digital apparatus complies with Canadian ICES-003. Section A. RSS-310 (27 MHz transmitters and receivers): This Category II radio communication device complies with Industry Canada Standard RSS-310. Section B. RSS-210 (2.4 GHz transmitters or transceivers): This Category I radio communication device complies with RSS-210 of Industry Canada. Caution: (i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co- channel mobile satellite systems; (ii) high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. Mexico Statement: The operation of this equipment is subject to the following two conditions: (1) that no harmful interference is caused by this equipment or device and (2) that interference must be accepted by the equipment or device, including any which may cause incorrect operation. Logitech hardware product limited warranty. Logitech warrants to the original purchaser that your Logitech hardware product shall be free from defects in material and workmanship for the period of time, identified on your product package and/or contained in the user documentation, from the date of purchase. You may also find this information by selecting your product in the Online Support section of our website at www.logitech.com/support. Except where prohibited by applicable law, this warranty is nontra…

Text truncated - open the document above for the full version.

ConferenceCam Connect QuickStart Guide | Guide de démarrage rapide English Logitech ConferenceCam Connect English 3 What’s in the box 1. Main unit with camera and speakerphone 2. Remote control 3. Power cable and regional plugs 4. USB Cable 5. User documentation 12 3 5 4 ConferenceCam Connect QuickStart Guide | Guide de démarrage rapide Logitech ConferenceCam Connect 4 English Know your product 2 3 1 5 6 4 7 9 11 5 12 14 7 6 8 13 15 10 Z E I S S H D 1 0 8 0 p , 4 x Z o o m 1. Camera, 1080p and 90-degree FOV 2. Camera LED 3. Tilt wheel for tilting camera lens 4. Microphones 5. Volume Up 6. Mute 7. Volume down 8. Battery indicator 9. Speakerphone 10. Speakerphone/ Battery LED 11. Pan and Tilt 12. Zoom In 13. Zoom Out 14. End Call 15. Make/Answer Call Logitech ConferenceCam Connect English 5 3 1 4 2 6 5 1. Microphone 2. NFC 3. Kensington Lock 4. USB connector 5. Power 6. HDMI connector (wireless screen mirror mode) Logitech ConferenceCam Connect 6 English 1. Wireless screen mirror mode 2. Power On/Off button 3. Bluetooth® mode 4. Video conferencing mode 1 3 2 4 Logitech ConferenceCam Connect English 7 Setup your product 3 Bluetooth mode Wireless Screen Mirror Mode Video Conferencing Mode 1 2 On / O 1. Connect ConferenceCam Connect to external power. Although ConferenceCam Connect comes with rechargeable battery, it must first be plugged into external power and charged till the green battery light displays. Note: The device can also be charged through USB on your PC or Mac (charging times may vary.) 2. Press and hold power On/Off button to turn on the device. A sound will play and the device LEDs will light for 2-3 seconds, with the last used mode LED staying lit when on. 3. Select the following modes and follow the instructions to get started. Logitech ConferenceCam Connect 8 English 1. Video Conferencing Mode: 1. Connect the USB cable to the device and to your USB port. 2. To start a call from your PC or Mac application, select Video Conferencing Mode on ConferenceCam Connect. The camera and speakerphone LEDs will flash to show that connection is taking place, and when completed, the camera LED will light steady for a few seconds and the speakerphone will play a sound. If these activities do not take place, try again and then consult Troubleshooting or call technical support. 3. Ensure that ConferenceCam Connect is selected as the default video and audio device in your OS settings and in your conferencing application. Start your video or audio call from your application. The LEDs on the camera and speakerphone will alight when streaming. 2. Bluetooth Mode To connect ConferenceCam Connect speakerphone to your mobile device: 1. Select Bluetooth mode on the ConferenceCam Connect. 2. If your device is NFC enabled, touch the mobile device to the NFC icon on the speakerphone, which should enable Bluetooth acceptance on the mobile device, or hold down the Bluetooth button until the LED on the speakerphone starts blinking blue rapidly. 3. On your mobile device, go to settings and turn on Bluetooth to connect. The ConferenceCam Connect will also play a sound to acknowledge connection. Logitech ConferenceCam Connect English 9 3. Wireless Screen Mirror Mode (Screen share content from your mobile device): 1. Connect the HDMI cable from your display to the back of the ConferenceCam Connect device. 2. Select Wireless Screen Mirror Mode on the ConferenceCam Connect. 3. On your mobile device, go to Settings, and then select your mobile device’s option for screen mirroring. The listed option name will differ from device to device. For help with your mobile device setting, please consult www.logitech.com/support/connect for list of tested devices. Note: Only Bluetooth mode and Wireless Screen Mirror Mode may operate at the same time. Wireless performance may vary. Logitech ConferenceCam Connect 10 English Use your product • Video • Starting the video: The video is controlled by the application and will start once the camera is selected and the video is started in the application. Camera LED will light when the video is streaming. • Pan, tilt and zoom the camera using the controls on the remote control. Press once for incremental or press and hold for continuous pan or tilt. You can also pan and tilt the camera image -- first zoom in, and then pan the image or tilt the image. You may also tilt the actual camera with the tilt wheel on the unit. Do not manually try to tilt camera itself. Doing so may damage unit. • Saving pan, tilt and zoom settings: An optional application is available which includes a software interface to control camera settings. These can be saved so your camera settings remain next time you turn on the unit. You may download the software from www.logitech.com/support/connect • Far end control: You may control the pan, tilt and zoom of a remote ConferenceCam CC3000e, ConferenceCam Connect or a ConferenceCam BCC950, in supported applications. Please visit the download page listed for more information. • Audio • Volume: Volume Up and Down adjusts volume. • Mute: Mute audio with Mute button. • Calling: Run video conferencing software. Answer picks up call. Hang up ends call. For call waiting, select hang up to reject second call or answer button to toggle between calls Note: Answer and Hang up buttons may not work in some applications. Use video conferencing software to answer and end call. To enable answer and hangup buttons for Skype or Cisco Jabber, please download the plugin available from www.logitech.com/support/ connect • SpeakerPhone Activity light indications Logitech ConferenceCam Connect English 11 Blue: ConferenceCam is in active call. Blinking Blue: Call is being received or Bluetooth is in pairing mode. Bluetooth to connect ConferenceCam Connect speakerphone to your mobile device for speakerphone broadcast of call: • If your device is NFC enabled, touch the mobile device to the NFC icon on the speakerphone, which should enable Bluetooth acceptance on the mobile device OR • Pres…

Text truncated - open the document above for the full version.

Report No.: 141203E09 Page 1 CONSTRUCTION PHOTOS OF EUT Report No.: 141203E09 Page 2 Report No.: 141203E09 Page 3 Report No.: 141203E09 Page 4 Report No.: 141203E09 Page 5

(Fig.1) FCC ID: JNZVR0004 FCC LABEL & Label LOCATION The label will be permanently affixed at a conspicuous location on the device.

Report No.: 141203E09 Page 6 Report No.: 141203E09 Page 7 Report No.: 141203E09 Page 8 Report No.: 141203E09 Page 9 Report No.: 141203E09 Page 10 Report No.: 141203E09 Page 11 Report No.: 141203E09 Page 12 Report No.: 141203E09 Page 13 Report No.: 141203E09 Page 14 Report No.: 141203E09 Page 15 Report No.: 141203E09 Page 16 Report No.: 141203E09 Page 17 Report No.: 141203E09 Page 18 Report No.: 141203E09 Page 19 Report No.: 141203E09 Page 20 Report No.: 141203E09 Page 21 Report No.: 141203E09 Page 22 Report No.: 141203E09 Page 23 Report No.: 141203E09 Page 24 Report No.: 141203E09 Page 25

Report No.: SA141203E08A Page No. 1 / 7 Report Format Version: 6.1.1 Reference No.:141203E09 RF Exposure Report Report No.: SA141203E08A FCC ID: JNZVR0004 Test Model: V-R0004 Received Date: Dec. 03, 2014 Test Date: Jan. 22, 2015 Issued Date: Jan. 30, 2015 Applicant: LOGITECH FAR EAST LTD. Address: #2 Creation Rd. 4, Science-Based Ind. Park Hsinchu Taiwan, R.O.C. Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory Lab Address: No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan R.O.C. Test Location (1): No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan R.O.C. Test Location (2): No. 49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. Report No.: SA141203E08A Page No. 2 / 7 Report Format Version: 6.1.1 Reference No.:141203E09 Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 RF Exposure .......................................................................................................................................... 5 2.1 Limits For Maximum Permissible Exposure (MPE) ............................................................................. 5 2.2 MPE Calculation Formula ................................................................................................................... 5 2.3 Classification ....................................................................................................................................... 5 3 Antenna Gain ......................................................................................................................................... 5 4 Calculation Result Of Maximum Conducted Power .......................................................................... 6 Report No.: SA141203E08A Page No. 3 / 7 Report Format Version: 6.1.1 Reference No.:141203E09 Release Control Record Issue No. Description Date Issued SA141203E08A Original release. Jan. 30, 2015 Report No.: SA141203E08A Page No. 5 / 7 Report Format Version: 6.1.1 Reference No.:141203E09 2 RF Exposure 2.1 Limits For Maximum Permissible Exposure (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Average Time (minutes) Limits For General Population / Uncontrolled Exposure 300-1500 ... ... F/1500 30 1500-100,000 ... ... 1.0 30 F = Frequency in MHz 2.2 MPE Calculation Formula Pd = (Pout*G) / (4*pi*r 2 ) where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 2.3 Classification The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. 3 Antenna Gain The antennas provided to the EUT, please refer to the following table: BT Brand Model Gain (dBi) Antenna Type Connecter Type Frequency range (GHz to GHz) NA NA -1.29 PCB printed NA 2.402 ~ 2.48 WLAN Brand Model Gain (dBi) Antenna Type Connecter Type Frequency range (GHz to GHz) NA NA 1.64 PCB printed NA 2.4 ~ 2.4835 1.57 5.15 ~ 5.85 Report No.: SA141203E08A Page No. 6 / 7 Report Format Version: 6.1.1 Reference No.:141203E09 4 Calculation Result Of Maximum Conducted Power For WLAN: 15.247(2.4GHz) 802.11g FREQUENCY (MHz) CONDUCTED POWER (mW) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/cm 2 ) LIMIT (mW/cm 2 ) 2412 - 2462 304.789 1.64 20 0.08846 1 802.11n (HT20) FREQUENCY (MHz) CONDUCTED POWER (mW) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/cm 2 ) LIMIT (mW/cm 2 ) 2412 - 2462 278.612 1.64 20 0.08086 1 For WLAN: 15.407(5GHz) 802.11a FREQUENCY (MHz) CONDUCTED POWER (mW) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/cm 2 ) LIMIT (mW/cm 2 ) 5180 ~ 5240 50.582 1.57 20 0.01445 1 5745 ~ 5825 206.063 1.57 20 0.05885 1 802.11n (HT20) FREQUENCY (MHz) CONDUCTED POWER (mW) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/cm 2 ) LIMIT (mW/cm 2 ) 5180 ~ 5240 54.954 1.57 20 0.01569 1 5745 ~ 5825 194.984 1.57 20 0.05568 1 802.11n (HT40) FREQUENCY (MHz) CONDUCTED POWER (mW) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/cm 2 ) LIMIT (mW/cm 2 ) 5190 ~ 5230 52.602 1.57 20 0.01502 1 5755 ~ 5795 112.46 1.57 20 0.03212 1 Report No.: SA141203E08A Page No. 7 / 7 Report Format Version: 6.1.1 Reference No.:141203E09 For Bluetooth: GFSK FREQUENCY (MHz) CONDUCTED…

Text truncated - open the document above for the full version.

Report No.: RF141203E08A-2 Page No. 1 / 52 Report Format Version: 6.1.1 Reference No.: 141203E09 FCC Test Report (BT-EDR) Report No.: RF141203E08A-2 FCC ID: JNZVR0004 Test Model: V-R0004 Received Date: Dec. 03, 2014 Test Date: Jan. 20 to 22, 2015 Issued Date: Jan. 30, 2015 Applicant: LOGITECH FAR EAST LTD. Address: #2 Creation Rd. 4, Science-Based Ind. Park Hsinchu Taiwan, R.O.C. Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory Lab Address: No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan R.O.C. Test Location (1): No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan R.O.C. Test Location (2): No. 49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF141203E08A-2 Page No. 2 / 52 Report Format Version: 6.1.1 Reference No.: 141203E09 Table of Contents Release Control Record .................................................................................................................................. 4 1 Certificate of Conformity ...................................................................................................................... 5 2 Summary of Test Results ..................................................................................................................... 6 2.1 Measurement Uncertainty ................................................................................................................... 6 2.2 Modification Record ............................................................................................................................ 6 3 General Information .............................................................................................................................. 7 3.1 General Description of EUT (BT-EDR) ................................................................................................ 7 3.2 Description of Test Modes ................................................................................................................... 9 3.2.1 Test Mode Applicability and Tested Channel Detail ........................................................................... 10 3.3 Description of Support Units ............................................................................................................. 12 3.3.1 Configuration of System under Test .................................................................................................. 13 3.4 General Description of Applied Standards ........................................................................................ 14 4 Test Types and Results ...................................................................................................................... 15 4.1 Radiated Emission and Bandedge Measurement ............................................................................. 15 4.1.1 Limits of Radiated Emission and Bandedge Measurement .............................................................. 15 4.1.2 Test Instruments ................................................................................................................................ 16 4.1.3 Test Procedures ................................................................................................................................. 18 4.1.4 Deviation from Test Standard ............................................................................................................ 18 4.1.5 Test Set Up ........................................................................................................................................ 19 4.1.6 EUT Operating Conditions ................................................................................................................. 20 4.1.7 Test Results ....................................................................................................................................... 21 4.2 Conducted Emission Measurement .................................................................................................. 28 4.2.1 Limits of Conducted Emission Measurement .................................................................................... 28 4.2.2 Test Instruments ................................................................................................................................ 28 4.2.3 Test Procedures ................................................................................................................................. 29…

Text truncated - open the document above for the full version.

Report No.: RF141203E08A-3 Page No. 1 / 42 Report Format Version: 6.1.1 Reference No.:141203E09 FCC Test Report (BT-LE) Report No.: RF141203E08A-3 FCC ID: JNZVR0004 Test Model: V-R0004 Received Date: Dec. 03, 2014 Test Date: Jan. 20 to 22, 2015 Issued Date: Jan. 30, 2015 Applicant: LOGITECH FAR EAST LTD. Address: #2 Creation Rd. 4, Science-Based Ind. Park Hsinchu Taiwan, R.O.C. Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory Lab Address: No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan R.O.C. Test Location (1): No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan R.O.C. Test Location (2): No. 49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF141203E08A-3 Page No. 2 / 42 Report Format Version: 6.1.1 Reference No.:141203E09 Table of Contents Release Control Record .................................................................................................................................. 4 1 Certificate of Conformity ...................................................................................................................... 5 2 Summary of Test Results ..................................................................................................................... 6 2.1 Measurement Uncertainty ................................................................................................................... 6 2.2 Modification Record ............................................................................................................................ 6 3 General Information .............................................................................................................................. 7 3.1 General Description of EUT (BT-LE) ................................................................................................... 7 3.2 Description of Test Modes ................................................................................................................... 9 3.2.1 Test Mode Applicability and Tested Channel Detail ........................................................................... 10 3.3 Duty Cycle of Test Signal .................................................................................................................. 12 3.4 Description of Support Units ............................................................................................................. 13 3.4.1 Configuration of System under Test .................................................................................................. 14 3.5 General Description of Applied Standards ........................................................................................ 15 4 Test Types and Results ...................................................................................................................... 16 4.1 Radiated Emission and Bandedge Measurement ............................................................................. 16 4.1.1 Limits of Radiated Emission and Bandedge Measurement .............................................................. 16 4.1.2 Test Instruments ................................................................................................................................ 17 4.1.3 Test Procedures ................................................................................................................................. 19 4.1.4 Deviation from Test Standard ............................................................................................................ 19 4…

Text truncated - open the document above for the full version.