JNZYR00112.4GHz Cordless Keyboard

.

Page 1 CONSTRUCTION PHOTOS OF EUT Page 12

(Fig.1) FCC ID: JNZYR0011 FCC LABEL LOCATION The label will be permanently affixed at a conspicuous location on the device.

Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11

Report No.: RF990604E02 1 Report Format Version 3.0.1 FCC TEST REPORT REPORT NO.: RF990604E02 MODEL NO.: Y-R0011 RECEIVED: June 04, 2010 TESTED: June 04 to 08, 2010 ISSUED: June 14, 2010 APPLICANT: LOGITECH FAR EAST LTD. ADDRESS: #2 Creation Rd. 4, Science-Based Ind. Park Hsinchu Taiwan, R.O.C. ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS: No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan This test report consists of 34 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by TAF any government agencies. The test results in the report only apply to the tested sample. Report No.: RF990604E02 2 Report Format Version 3.0.1 Table of Contents 1 CERTIFICATION.............................................................................................3 2 SUMMARY OF TEST RESULTS.....................................................................4 2.1 MEASUREMENT UNCERTAINTY......................................................................4 3 GENERAL INFORMATION.............................................................................5 3.1 GENERAL DESCRIPTION OF EUT................................................................5 3.2 DESCRIPTION OF TEST MODES..................................................................6 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL..................6 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS.................................8 3.4 DESCRIPTION OF SUPPORT UNITS............................................................9 3.5 CONFIGURATION OF SYSTEM UNDER TEST...........................................10 4 TEST PROCEDURES AND RESULTS..........................................................11 4.1 CONDUCTED EMISSION MEASUREMENT.................................................11 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT...............................11 4.1.2 TEST INSTRUMENTS...................................................................................11 4.1.3 TEST PROCEDURES...................................................................................12 4.1.4 TEST SETUP................................................................................................12 4.1.5 EUT OPERATING CONDITIONS..................................................................13 4.1.6 TEST RESULTS (MODE 1)...........................................................................14 4.1.7 TEST RESULTS (MODE 2)...........................................................................16 4.2 RADIATED EMISSION MEASUREMENT.....................................................18 4.2.1 LIMITS OF RADIATED EMISSION MEASUREMENT...................................18 4.2.2 TEST INSTRUMENTS..................................................................................19 4.2.3 TEST PROCEDURES...................................................................................21 4.2.4 DEVIATION FROM TEST STANDARD.........................................................21 4.2.5 TEST SETUP................................................................................................22 4.2.6 EUT OPERATING CONDITIONS..................................................................22 4.2.7 TEST RESULTS............................................................................................23 4.3 CONDUCTED - OUT BAND MEASUREMENT.............................................30 4.3.1 LIMITS OF CONDUCTED - OUT BAND MEASUREMENT..........................30 4.3.2 TEST INSTRUMENTS..................................................................................30 4.3.3 TEST PROCEDURE.....................................................................................30 4.3.4 DEVIATION FROM TEST STANDARD.........................................................30 4.3.5 EUT OPERATING CONDITION....................................................................30 4.3.6 TEST RESULTS............................................................................................31 5 INFORMATION ON THE TESTING LABORATORIES..................................33 6 APPENDIX A - MODIFICATIONS RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB.....................................................................34 Report No.: RF990604E02 3 Report Format Version 3.0.1 1 CERTIFICATION PRODUCT : 2.4GHz Cordless Keyboard BRAND NAME : Logitech MODEL NO. : Y-R0011 TESTED : June 04 to 08, 2010 TEST SAMPLE : ENGINEERING SAMPLE APPLICANT : LOGITECH FAR EAST LTD. STANDARDS : 47 CFR Part 15, Subpart C (Section 15.249) ANSI C63.4-2003 The above equipment (Model: Y-R0011) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE: June 14, 2010 ( Midoli Peng, Specialist ) TECHNICAL ACCEPTANCE : , DATE: June 14, 2010 ( Hank Chung, Deputy Manager ) APPROVED BY : , DATE: June 14, 2010 (May Chen, Deputy Manager ) Report No.: RF990604E02 4 Report Format Version 3.0.1 2 SUMMARY OF TEST RESULTS The EUT has been tested according to the following specifications: APPLIED STANDARD: 47 CFR Part 15, Subpart C Standard Paragraph Test Type Result Remark 15.207 Conducted Emission Test PASS Meet the requirement of limit. Minimum passing margin is -4.91dB at 0.150MHz 15.249 Radiated Emission Test PASS Meet the requirement of limit. Minimum passing margin is -9.6dB at 2400.00MHz 15.249 Conducted - Out Band Measurement PASS Meet the requirement of …

Text truncated - open the document above for the full version.

1 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST(Mode 1) 2 CONDUCTED EMISSION TEST(Mode 2) 3 RADIATED EMISSION TEST