JPZ0097Wirless Lighting Controller

LUTRON Control Unit Quick Installation and Operation Guide ® Please Read The GRAFIK Eye® QS control unit allows for control of both lights and shades, without interfaces, using a single control unit. Features include pushbutton scene recall, info screen that displays energy savings and status, IR receiver, astronomic timeclock, contact closure input, and engravable backlit buttons that are easy to find and operate. Model Numbers: QSGRJ-3P, QSGRJ-4P, QSGRJ-6P QSGR-3P, QSGR-4P, QSGR-6P 120 V 50/60 Hz 220 - 240 V 50/60 Hz Unit Capacity (watts)2000 W3000 W MLV2000 VA 1600 W 3000 VA 2400 W Zone Capacity (watts)25 – 800 W40 – 1200 W MLV25 – 800 VA 25 – 600 W 40 – 1200 VA 40 – 960 W See page 6 for IEC PELV/NEC ® Class 2 ratings. For California residents only: The batteries in these devices contain Perchlorate Material – special handling may apply. For more information visit www.dtsc.ca.gov/hazardouswaste/perchlorate Contents Features and Functions of the GRAFIK Eye® QS Control Unit . . . . . . . . . . . . . . . . .2 Wiring the GRAFIK Eye® QS Control Unit Overview of Line Voltage/Mains Wiring . . . . . . . . .3 Line Voltage Wiring Details . . . . . . . . . . . . . . . . . . .4 Overview of IEC PELV/NEC® Class 2 Wiring . . . . .6 QS Link Control Wiring Details . . . . . . . . . . . . . . . .7 Power Group Wiring Example . . . . . . . . . . . . . . . .8 Completing Installation of the GRAFIK Eye® QS Control Unit . . . . . . . . . . . . .9 Programming Mode Entering and Exiting Programming Mode . . . . . .10 Navigating Menus in Programming Mode . . . . . .10 Wireless Mode . . . . . . . . . . . . . . . . . . . . . . . . .11 FCC Information . . . . . . . . . . . . . . . . . . . . . . . . . .11 Zone Setup Assigning Load Types . . . . . . . . . . . . . . . . . . . . . .12 Assigning Non-Dim Load Type . . . . . . . . . . . . . . .12 Setting Load Types . . . . . . . . . . . . . . . . . . . . . . . .13 Scene Setup Setting Zone Levels, Fade Rates, and Shade Group Actions . . . . . . . . . . . . . . . . .14 Occupancy Sensor Setup . . . . . . . . . . . . . . . .15 Scene Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 Configuring Occupancy Sensor Settings (optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 Pico® Wireless Control Setup: Associating with a GRAFIK Eye® QS Wireless Control Unit . . . . . . . . . . . . . . . . . . . . .18 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . .19 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 Contact Information . . . . . . . . . . . . . . . . . . . .20 For additional features and advanced functions, see the complete installation and operation guide at www.lutron.com/qs English Español Français OK ® Info screen Displays status or programming functions Scene buttons With integral scene indicator LEDs Optional Shade button groups Preset and raise/lower buttons with integral LEDs (maximum of 3 button groups) Zone numbers Zone raise/lower buttons Zone LEDs display current lighting zone levels Timeclock button Displays current timeclock info OK button Used for programming Infrared receiver For handheld remote use Master buttons Temporarily raise and lower lighting levels on unit USB type mini B For programming via PC { Hinged faceplate Hinged faceplate Features and Functions of the GRAFIK Eye® QS Control Unit For additional information, see the complete installation and operation guide at www.lutron.com/qs GRAFIK Eye® QS Control Unit Quick Installation and Operation Guide 2 ® For additional information, see the complete installation and operation guide at www.lutron.com/qs GRAFIK Eye® QS Control Unit Quick Installation and Operation Guide 3 Wiring the GRAFIK Eye® QS Control Unit: Overview of Line Voltage/Mains Wiring 1 2 3 4 1 2 A B C 1 2 3 4 5 6 L N 12 AWG (4.0 mm 2 ) each terminal 120 - 127 V or 220 - 240 V Distribution Panel Line Voltage/Mains Cables and Load Wiring 1 2 3 4 5 6 L N Incandescent load Load controlled by power module or interface Terminal labels: L: Hot/Live N: Neutral : Ground 1-6: Dimmed/Switched line voltage outputs Power module or interface ® Wiring the GRAFIK Eye® QS Control Unit: Line Voltage Wiring Details • Use properly certified cable for all line voltage/mains cables. • Proper short-circuit and overload protection must be provided at the distribution panel. You can use up to a 20 A circuit breaker for your installation. • Install in accordance with all local and national electrical codes. • IEC PELV/NEC® Class 2 terminals may be temporarily unplugged for ease of IR, occupancy sensor, and control wiring. • Notice: Risk of damage to unit . Do not connect line voltage/mains cable to IEC PELV/NEC® Class 2 terminals. Step 1: Install wallbox. Mount a 3½ in (89 mm) deep 4-gang U.S. wallbox on a dry, flat indoor surface that is accessible and allows for system programming and operation. Allow at least 4½ in (110 mm) clearance above and below the faceplate to ensure proper heat dissipation. Allow 1 in (25 mm) for faceplate overhang on all sides. Note: 4-gang wallbox available from Lutron; P/N 241400. Step 2: Test load wiring. • Turn power OFF at the circuit breaker or fuse box. • Connect a standard light switch between the live lead and load wire to test the circuit. • Turn power ON and check for short or open circuits. If load does not operate, the circuit is open. If the circuit breaker trips (fuse blows or opens), a load short may exist. Correct short or open circuits and test again. Step 3: Check control unit wiring. • Earth/ground terminal connection must be made as shown in line voltage wiring diagrams. • Do not mix different load types on the same zone. •Follow all local and national electrical codes when installing IEC PELV/ NEC ® Class 2 wiring with line voltage/ mains wiring. WARNING! Shock hazard. May result in serious injury or death. Always turn off circuit breaker or remove main fuse from power line before doing any work. Before connecting the loads to the GRAFIK Eye ® QS cont…

Text truncated - open the document above for the full version.

FCC CFR47 PART 15 SUBPART C INDUSTRY CANADA RSS-210 ISSUE 8 CERTIFICATION TEST REPORT FOR LIGHTING CONTROLLER MODEL NUMBER: QS Wireless FCC ID: JPZ0097 IC: 2851A-JPZ0097 REPORT NUMBER: 10014723 ISSUE DATE: 2013-07-23 Prepared for LUTRON ELECTRONICS 7200 SUTER ROAD COOPERSBURG PA, 18036, USA Prepared by UL LLC 1285 WALT WHITMAN RD. MELVILLE, NY 11747, U.S.A. TEL: (631) 271-6200 FAX: (877) 854-3577 REPORT NO: 10014723 DATE: 2013-07-23 FCC ID: JPZ0097 IC: 2851A-JPZ0097 Page 2 of 50 UL LLC. FORM NO: CCSUP4701D 1285 WALT WHITMAN RD, MELVILLE, NY 11747, USA TEL: (631) 271-6200 FAX: (877) 854-3577 This report shall not be reproduced except in full, without the written approval of UL LLC. Revision History Rev. Issue Date Revisions Revised By -- 2013- 07-23 Initial Issue B. DeLisi REPORT NO: 10014723 DATE: 2013-07-23 FCC ID: JPZ0097 IC: 2851A-JPZ0097 Page 3 of 50 UL LLC. FORM NO: CCSUP4701D 1285 WALT WHITMAN RD, MELVILLE, NY 11747, USA TEL: (631) 271-6200 FAX: (877) 854-3577 This report shall not be reproduced except in full, without the written approval of UL LLC. TABLE OF CONTENTS 1. ATTESTATION OF TEST RESULTS ................................................................................. 4 2. TEST METHODOLOGY ..................................................................................................... 5 3. FACILITIES AND ACCREDITATION ................................................................................. 5 4. CALIBRATION AND UNCERTAINTY ................................................................................ 5 4.1. MEASURING INSTRUMENT CALIBRATION .............................................................. 5 4.2. SAMPLE CALCULATION ............................................................................................ 5 4.3. MEASUREMENT UNCERTAINTY ............................................................................... 5 5. EQUIPMENT UNDER TEST ............................................................................................... 6 5.1. DESCRIPTION OF EUT .............................................................................................. 6 5.2. DESCRIPTION OF AVAILABLE ANTENNAS .............................................................. 6 5.3. SOFTWARE AND FIRMWARE .................................................................................... 6 5.4. WORST-CASE CONFIGURATION AND MODE .......................................................... 6 5.5. MODIFICATIONS ........................................................................................................ 6 5.6. DESCRIPTION OF TEST SETUP ................................................................................ 7 6. TEST AND MEASUREMENT EQUIPMENT ....................................................................... 9 7. ANTENNA PORT TEST RESULTS ...................................................................................11 7.1. 20 dB AND 99% BW ...................................................................................................11 7.2. DUTY CYCLE .............................................................................................................15 7.3. TRANSMISSION TIME ...............................................................................................19 8. RADIATED EMISSION TEST RESULTS...........................................................................21 8.1. TX RADIATED SPURIOUS EMISSION ......................................................................21 8.2. RX RADIATED SPURIOUS EMISSION ......................................................................28 9. AC MAINS LINE CONDUCTED EMISSIONS ....................................................................33 10. SETUP PHOTOS ...........................................................................................................46 REPORT NO: 10014723 DATE: 2013-07-23 FCC ID: JPZ0097 IC: 2851A-JPZ0097 Page 4 of 50 UL LLC. FORM NO: CCSUP4701D 1285 WALT WHITMAN RD, MELVILLE, NY 11747, USA TEL: (631) 271-6200 FAX: (877) 854-3577 This report shall not be reproduced except in full, without the written approval of UL LLC. 1. ATTESTATION OF TEST RESULTS COMPANY NAME: Lutron Electronics Inc 7200 Suter Road Coopersburg, PA, 18036, USA EUT DESCRIPTION: Lighting Controller MODEL: QS Wireless SERIAL NUMBER: 00e9 00DC DATE TESTED: 2013-07-15 through 2013-07-23 APPLICABLE STANDARDS STANDARD TEST RESULTS FCC PART 15 SUBPART C Pass INDUSTRY CANADA RSS-210 Issue 8, Annex 1 Pass INDUSTRY CANADA RSS-GEN Issue 3 Pass UL LLC tested the above equipment in accordance with the requirements set forth in the above standards, using test results reported in the test report documents referenced below and/or documentation furnished by the applicant. All indications of Pass/Fail in this report are opinions expressed by UL LLC based on interpretations of these calculations. The results show that the equipment is capable of demonstrating compliance with the requirements as documented in this report. Note: The results documented in this report apply only to the tested sample, under the conditions and modes of operation, as described by the referenced documents. This document may not be altered or revised in any way unless done so by UL LLC and all revisions are duly noted in the revisions section. Any alteration of this document not carried out by UL LLC will constitute fraud and shall nullify the document. This report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, any agency of the Federal Government, or any agency of any government. Approved & Released For UL By: Tested By: Michael Antola Bob DeLisi WiSE Project Lead WiSE Principal Engineer UL LLC UL LLC REPORT NO: 10014723 DATE: 2013-07-23 FCC ID: JPZ0097 IC: 2851A-JPZ0097 Page 5 of 50 UL LLC. FORM NO: CCSUP4701D 1285 WALT WHITMAN RD, MELVILLE, NY 11747, USA TEL: (631) 271-6200 FAX: (877) 854-3577 This report shall not be reproduced except in full, without the wr…

Text truncated - open the document above for the full version.

REPORT NO: 10014723 DATE: 2013-07-23 FCC ID: JPZ0097 IC: 2851A-JPZ0097 Page 46 of 50 UL LLC. FORM NO: CCSUP4701D 1285 WALT WHITMAN RD, MELVILLE, NY 11747, USA TEL: (631) 271-6200 FAX: (877) 854-3577 This report shall not be reproduced except in full, without the written approval of UL LLC. 10. SETUP PHOTOS ANTENNA PORT ANTENNA PORT REPORT NO: 10014723 DATE: 2013-07-23 FCC ID: JPZ0097 IC: 2851A-JPZ0097 Page 47 of 50 UL LLC. FORM NO: CCSUP4701D 1285 WALT WHITMAN RD, MELVILLE, NY 11747, USA TEL: (631) 271-6200 FAX: (877) 854-3577 This report shall not be reproduced except in full, without the written approval of UL LLC. RADIATED EMISSION ABOVE 30 MHz RADIATED EMISSIONS ABOVE 30 MHz (FRONT) REPORT NO: 10014723 DATE: 2013-07-23 FCC ID: JPZ0097 IC: 2851A-JPZ0097 Page 48 of 50 UL LLC. FORM NO: CCSUP4701D 1285 WALT WHITMAN RD, MELVILLE, NY 11747, USA TEL: (631) 271-6200 FAX: (877) 854-3577 This report shall not be reproduced except in full, without the written approval of UL LLC. RADIATED EMISSIONS ABOVE 30 MHz (BACK) REPORT NO: 10014723 DATE: 2013-07-23 FCC ID: JPZ0097 IC: 2851A-JPZ0097 Page 49 of 50 UL LLC. FORM NO: CCSUP4701D 1285 WALT WHITMAN RD, MELVILLE, NY 11747, USA TEL: (631) 271-6200 FAX: (877) 854-3577 This report shall not be reproduced except in full, without the written approval of UL LLC. AC MAINS LINE CONDUCTED EMISSION LINE CONDUCTED EMISSION (FRONT) REPORT NO: 10014723 DATE: 2013-07-23 FCC ID: JPZ0097 IC: 2851A-JPZ0097 Page 50 of 50 UL LLC. FORM NO: CCSUP4701D 1285 WALT WHITMAN RD, MELVILLE, NY 11747, USA TEL: (631) 271-6200 FAX: (877) 854-3577 This report shall not be reproduced except in full, without the written approval of UL LLC. END OF REPORT LINE CONDUCTED EMISSION (BACK)