JPZ0149Lighting Control Hub

2 Download the Lutron app and walk through setup Lutron Search for “Lutron App” Quick-start guide RA2 Select Main Repeater Please read before installing Extend Your Warranty Love Lutron products? Have ideas for making them better? Tell us what you think and we’ll extend your warranty by 1 year. www.lutron.com/RegisterRA2Select RA2 Select Main Repeater* (RR-SEL-REP2) 5 V- 300 mA Power Supply (T-5DC-USB) Input: 100–240 V~ 50/60 Hz 100 mA Output: 5 V- 550 mA Ethernet Cable Contents supplied: * Connected to a Class 2, LPS, or SELV, limited energy (<15 W) power source only. 1 Install the RA2 Select Main Repeater 0301866 Rev A Warranty For warranty information, please visit www.lutron.com/warranty )Lutron, Lutron, and Lutron are trademarks of Lutron Electronics Co., Inc. registered in the U.S. and other countries. RadioRA 2 is a trademark of Lutron Electronics Co., Inc. Apple is a trademark of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc., registered in the U.S. and other countries. Google Play and the Google Play logo are trademarks of Google Inc. © 2017 Lutron Electronics Co., Inc. A. Connect the Main Repeater to your Wi-Fi router using the Ethernet cable. B. Connect the power cord to the Main Repeater and plug it into an outlet. Main Main Repeater Ethernet cable Router Router Power cord Outlet Accessory Setup Code Customer Assistance U.S.A. and Canada: 1.844.LUTRON1 Fax: +1.610.282.6311 Mexico: 1.888.235.2910 Other countries: +1.610.282.3800 www.lutron.com/support Note: The RA2 Select Main Repeater cannot be used with the RadioRA 2 PC-based programming software. Guía de inicio rápido Amplíe su garantía ¿Le encantan los productos Lutron? ¿Tiene alguna idea para mejorarlos? Cuéntenos su opinión y extenderemos la garantía por 1 año. www.lutron.com/RegisterRA2Select Repetidor principal del RA2 Select * (RR-SEL-REP2) 5 V- 300 mA Adaptador de alimentación (T-5DC-USB) Entrada: 100–240 V~ 50/60 Hz 100 mA Salida: 5 V- 550 mA Cable de Ethernet Contenido suministrado: * Solo debe conectarse a una adaptador de alimentación tipo Clase 2, de alimentación limita da (LPS), o de seguridad de voltaje extrabajo (SELV), y de energía limitada (<15 W). Repetidor principal del RA2 Select Por favor lea antes de realizar la instalación Garantía Para obtener información sobre la garantía, visite www.lutron.com/warranty Busque “Lutron App” 1 Instale el repetidor principal del RA2 Select A. Conecte el repetidor principal a su enrutador de Wi-Fi utilizado el cable de Ethernet B. Conecte el cable de alimentación eléctrica al repetidor principal y enchúfelo a un tomacorriente. Repetidor principal Repetidor principal Cable de Ethernet Enrutador Enrutador Cable de alimentación Tomacorriente 2 Descargue la aplicación de Lutron y proceda a su instalación )Lutron, Lutron, y Lutron son marcas comerciales de Lutron Electronics Co., Inc., registradas en E.U.A. y en otros países. RadioRA 2 es una marca comerciales de Lutron Electronics Co., Inc. Apple es una marca registrada de Apple Inc. en E.U.A. y en otros países. App Store es una marca de servicio de Apple Inc., en E.U.A. y en otros países. Google Play y el logotipo de Google Play son marcas comerciales de Google Inc. © 2017 Lutron Electronics Co., Inc. Lutron Asistencia al cliente E.U.A. y Canadá: 1.844.LUTRON1 Fax: +1.610.282.6311 México: 1.888.235.2910 Otros países: +1.610.282.3800 www.lutron.com/support Nota: El repetidor principal de RA2 Select no se puede utilizar con el software de programación RadioRA 2 ubicado en una PC. Guide de démarrage rapide Extension de votre garantie Vous aimez les produits Lutron? Vous avez des idées pour les améliorer? Dites- nous ce que vous en pensez et nous prolongerons votre garantie d’un an. www.lutron.com/RegisterRA2Select Répéteur principal RA2 Select * (RR-SEL-REP2) 5 V- 300 mA Alimentation électrique (T-5DC-USB) Entrée : 100–240 V~ 50/60 Hz 100 mA Sortie : 5 V- 550 mA Câble Ethernet Éléments fournis : * Connecté à une source d’alimentation à faible puissance (< 15 W) de Classe 2, LPS (à puissance limitée) ou SELV (à très basse tension de sécurité). Répéteur principal RA2 Select Veuillez lire avant l’installation Rechercher « Lutron App » 2 Téléchargez l’application de Lutron et suivez les étapes de configuration Garantie Pour obtenir des informations sur la garantie, veuillez consulter la page www.lutron.com/warranty 1 Installez le répéteur principal RA2 Select A. Raccordez le répéteur principal à votre routeur Wi-Fi au moyen du câble Ethernet. B. Raccordez le câble d’alimentation au le répéteur principal et branchez le dans une prise de courant. Répéteur principal Répéteur principal Câble Ethernet Routeur Routeur Câble d’alimentation Prise de courant )Lutron, Lutron, and Lutron sont des marques déposées de Lutron Electronics Co., Inc., enregistrées aux États-Unis et dans d’autres pays. RadioRA 2 est une marque déposée de Lutron Electronics Co., Inc. Apple est une marque de commerce d’Apple Inc., déposées aux États-Unis et dans d’autres pays. App Store est une marque de service d’Apple Inc., déposées aux États-Unis et dans d’autres pays. Google Play et le logo Google Play sont des marques de Google Inc. © 2017 Lutron Electronics Co., Inc. Lutron Assistance à la clientele États-Unis et Canada : 1.844.LUTRON1 Fax : +1.610.282.6311 Mexique : 1.888.235.2910 Autres pays : +1.610.282.3800 www.lutron.com/support Remarque : Le répéteur principal de RA2 Select ne peut pas être utilisé avec le logiciel de programmation sur PC RadioRA 2. FCC/IC Information This device complies with part 15 of the FCC Rules and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation. Modifications not expressly approved by Lutron Electronics Co., Inc. could void the user’s authority to operate this equipment. Note: …

Text truncated - open the document above for the full version.

2 Download the Lutron ® app and walk through setup www.casetawireless.com/LutronApp Lutron TM Search for “Lutron Caseta” Apple is a trademark of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc., registered in the U.S. and other countries. Quick-start guide Lutron® Smart Bridge Please read before installing Double your warranty Love LutronR products? Have ideas for making them better? Tell us what you think and we’ll extend your warranty by 1 year. www.casetawireless.com/register Lutron ® Smart Bridge * (L-BDG, BDG-1 or L-BDGPRO) 5 V- 300 mA Power Supply (T-5DC-USB) Input: 100–240 V~ 50/60 Hz 100 mA Output: 5 V- 550 mA Ethernet Cable Contents supplied: * Connected to a Class 2, LPS, or SELV, limited energy (<15 W) power source only. 1 Install the Lutron® Smart Bridge Warranty For warranty information, please visit www.casetawireless.com/warranty )Lutron and Lutron are registered trademarks and Lutron TM is a trademark of Lutron Electronics Co., Inc. Google and the Google logo are registered trademarks of Google Inc., used with permission. © 2014 – 2015 Lutron Electronics Co., Inc. A. Connect the Smart Bridge to your Wi-Fi router using the Ethernet cable. B. Connect the power cord to the Smart Bridge and plug it into an outlet. Smart Bridge Smart Bridge Ethernet cable Router Router Power cord Outlet Accessory Setup Code Guía de inicio rápido Doble su garantía ¿Le encantan los productos LutronR? ¿Tiene alguna idea para mejorarlos? Cuéntenos su opinión y extenderemos la garantía por 1 año. www.casetawireless.com/register Puente Inteligente Lutron® * (L-BDG2 o L-BDGPRO2) 5 V- 300 mA Adaptador de alimentación (T-5DC-USB) Entrada: 100–240 V~ 50/60 Hz 100 mA Salida: 5 V- 550 mA Cable de Ethernet Contenido suministrado: * Solo debe conectarse a una adaptador de alimentación tipo Clase 2, de alimentación limita da (LPS), o de seguridad de voltaje extrabajo (SELV), y de energía limitada (<15 W). Puente Inteligente Lutron® Por favor Lea antes de realizar la instalación P/N 0301812 REV A Garantía Para obtener información sobre la garantía, visite www.casetawireless.com/warranty )Lutron y Lutron son marcas registradas y Lutron TM es una marca comercial de Lutron Electronics Co., Inc. Google y el logotipo de Google son marcas registradas de Google, Inc., utilizadas con autorización. © 2014 – 2015 Lutron Electronics Co., Inc. www.casetawireless.com/LutronApp Lutron TM Busque “Lutron Caseta” Apple es una marca registrada de Apple Inc. en E.U.A. y en otros países. App Store es una marca de servicio de Apple Inc., en E.U.A. y en otros países. 1 Instale el Puente Inteligente de Lutron ® A. Conecte el Puente Inteligente a su enrutador de Wi-Fi utilizando el cable de Ethernet. B. Conecte el cable de alimentación eléctrica al Puente Inteligente y encúfelo a un tomacorriente. Puente Inteligente Puente Inteligente Cable de Ethernet Enrutador Enrutador Cable de alimentación Tomacorriente 2 Descargue la aplicación de Lutron ® y proceda a su instalación Guide de démarrage rapide Doublez votre garantie Vous aimez les produits LutronR? Vous avez des idées pour les améliorer? Dites-nous ce que vous en pensez et nous prolongerons votre garantie d’un an. www.casetawireless.com/register Pont intelligent Lutron® * (L-BDG2 ou L-BDGPRO2) 5 V- 300 mA Alimentation électrique (T-5DC-USB) Entrée : 100–240 V~ 50/60 Hz 100 mA Puissance : 5 V- 550 mA Câble Ethernet Éléments fournis : * Connecté à une source d’alimentation à faible puissance (< 15 W) de Classe 2, LPS (à puissance limitée) ou SELV (à très basse tension de sécurité). Pont intelligent Lutron® Veuillez lire avant l’installation www.casetawireless.com/LutronApp Lutron TM Rechercher « Lutron Caseta » Apple est une marque de commerce d’Apple Inc., déposées aux États-Unis et dans d’autres pays. App Store est une marque de service d’Apple Inc., déposées aux États-Unis et dans d’autres pays. 2 Téléchargez l’application de Lutron ® et suivez les étapes de configuration Garantie Pour obtenir des informations sur la garantie, veuillez consulter la page www.casetawireless.com/warranty )Lutron et Lutron sont des marques déposées et Lutron TM est une marque de commerce de Lutron Electronics Co., Inc. Google et le logo Google sont des marques déposées de Google, Inc., utilisées sous autorisation. © 2014 – 2015 Lutron Electronics Co., Inc. 1 Installez le Pont intelligent de Lutron® A. Raccordez le Pont intelligent à votre routeur Wi-Fi au moyen du câble Ethernet. B. Raccordez le câble d’alimentation au Pont intelligent et branchez le dans une prise de courant. Pont intelligent Pont intelligent Câble Ethernet Routeur Routeur Câble d’alimentation Prise de courant FCC/IC Information This device complies with part 15 of the FCC Rules and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation. Modifications not expressly approved by Lutron Electronics Co., Inc. could void the user’s authority to operate this equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —In…

Text truncated - open the document above for the full version.

Manufacturer’s Letter Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 RE: Certification Application Reference FCC ID: JPZ0149 To Whom It May Concern: Please be advised that the manufacture will ensure that devices covered by the above referenced FCC ID will be constructed in accordance with FCC rules and regulations. Authorized signature: _ Daniel J. Schlegel 2023-07-07 ____ Date: 10-Jul-23 Daniel J Schlegel Manager - Product Compliance Lutron Electronics Co., Inc.

Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 10-Jul-23 Subject: Long Term Request for Confidentiality – JPZ0149 Dear Sir or Madam: This letter is to formally request long term confidentiality, per the FCC Rules 47 CFR 0.457 and 0.459, for materials or information submitted to the Commission to be withheld from public inspection. For all models in this submission, the following items are Lutron Electronics Co., Inc. confidential information that must be from public inspection by potential competitors to protect our business. 1. Schematic 2. Operation Description 3. Bill of Materials 4. Block Diagram Thank you for your cooperation. Sincerely, Daniel J. Schlegel 2023-07-07 Daniel J Schlegel Manager - Product Compliance

Date: 10-Jul-23 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 c.c. Eurofins MET Labs 914 West Patapsco Avenue Baltimore, MD 21230 To whom it may concern: I, the undersigned, hereby authorize EUROFINS MET LABS to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by EUROFINS MET LABS on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing EUROFINS MET LABS a s our agent, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference t o our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, Daniel J. Schlegel 2023-07-07 Daniel J Schlegel Manager - Product Compliance Lutron Electronics Co., Inc.

L-BDG2 Photos DUT Top DUT Bottom w/ Label DUT Side DUT inside top w/ antenna L-BDG2 Photos DUT with back cover removed PWB top w/ shield PWB top w/ shield removed

RR-SEL-REP2 Photos DUT Top DUT Bottom w/ Label DUT Side DUT inside top w/ antenna RR-SEL-REP2 Photos DUT with back cover removed PWB top w/ shield removed

L-BDG2 FCC ID: JPZ0149 IFT: RCPLUCA14-0302 HVIN: VLK1 IC: 2851A-JPZ0149 Pats. | Brevets : 5 V 300 mA CB 3G0 LB2 Caséta Wireless lutron.com/patents MAC Address: 20:CD:39:8D:9D:BF 12345678 123-45-678 Assembled in U.S.A. Ensamblado en E.U.A. Assemblé aux É.-U.

L-BDGPRO2 Photos DUT Top DUT Bottom w/ Label DUT Side DUT inside top w/ antenna L-BDGPRO2 Photos DUT with back cover removed PWB top w/ shield removed

HEADQUARTERS: 914 WEST PATAPSCO AVENUE • BALTIMORE, MARYLAND 21230 • PHONE (410) 354-3300 • FAX (410) 354-3313 Report: WIR127472-FCC-RF Exposure © 2023, Eurofins Electrical and Electronic Testing NA, Inc. Page 1 of 4 Maryland | California | Texas www.metlabs.com DOC-WIR TEMP-FCC22-24-27-90-7-12-2021 – Rev 1 - Approved by DOC Manager RF Exposure Report (FCC) Report No.: WIR127472-FCC-RF Exposure Test Model: Caseta Bridge Test Date: July 7, 2023 Issued Date: July 10, 2023 Applicant: Lutron Electronics Address: 7200 Suter Rd Coopersburg, PA 18036 Issued By: Eurofins Electrical and Electronic Testing NA, Inc. Lab Address: 914 W. Patapsco Avenue, Baltimore, MD 21230 Certificates and reports shall not be reproduced except in full, without the written permission of Eurofins Electrical and Electronic Testing NA, Inc. While use of the A2LA logo in this report reflects Eurofins Electrical and Electronic Testing NA, Inc. accreditation under these programs, the report must not be used by the client to claim product certification, approval, or endorsement by A2LA, or any agency of the Federal Government. This letter of transmittal is not a part of the attached report. Eurofins Electrical and Electronic Testing NA, Inc. is part of the Eurofins Electrical & Electronics (E&E) global compliance network. HEADQUARTERS: 914 WEST PATAPSCO AVENUE • BALTIMORE, MARYLAND 21230 • PHONE (410) 354-3300 • FAX (410) 354-3313 Report: WIR127472-FCC-RF Exposure © 2023, Eurofins Electrical and Electronic Testing NA, Inc. Page 2 of 4 Maryland | California | Texas www.metlabs.com DOC-EMC TEMP-1 (REG) 11-05-2021– Rev. 1 - Approved by DOC Manager 1. Certificate of Conformity Product: Caseta Bridge FCC ID: JPZ0149 Brand: Lutron Electronics Test Model: Caseta Bridge Applicant: Lutron Electronics Test Date: July 7, 2023 Standard: 47 CFR FCC Part 2.1093 Donald Salguero Wireless Laboratory Engineer Engineering Statement: The measurements shown in this report were made in accordance with the procedures indicated. I assume full responsibility for the accuracy and completeness of these measurements, and for the qualifications of all persons taking them. It is further stated that upon the basis of the measurements made, the equipment tested is capable of operation in accordance with the requirements. Michael Griffiths Manager, Wireless Laboratory HEADQUARTERS: 914 WEST PATAPSCO AVENUE • BALTIMORE, MARYLAND 21230 • PHONE (410) 354-3300 • FAX (410) 354-3313 Report: WIR127472-FCC-RF Exposure © 2023, Eurofins Electrical and Electronic Testing NA, Inc. Page 3 of 4 Maryland | California | Texas www.metlabs.com DOC-EMC TEMP-1 (REG) 11-05-2021– Rev. 1 - Approved by DOC Manager Report Status Sheet Revision Report Date Reason for Revision Ø July 10, 2023 Initial Issue. HEADQUARTERS: 914 WEST PATAPSCO AVENUE • BALTIMORE, MARYLAND 21230 • PHONE (410) 354-3300 • FAX (410) 354-3313 Report: WIR127472-FCC-RF Exposure © 2023, Eurofins Electrical and Electronic Testing NA, Inc. Page 4 of 4 Maryland | California | Texas www.metlabs.com DOC-EMC TEMP-1 (REG) 11-05-2021– Rev. 1 - Approved by DOC Manager 2. RF Exposure Requirement: 47 CFR 2.1091(c)(1) Evaluation of compliance with the exposure limits in § 1.1310 of this chapter, and preparation of an EA if the limits are exceeded, is necessary for mobile devices with single RF sources having either more than an available maximum time- averaged power of 1 mW or more than the ERP listed in Table 1 to § 1.1307(b)(3)(i)(C), whichever is greater. For mobile devices not exempt by § 1.1307(b)(3)(i)(C) at distances from 20 centimeters to 40 centimeters and frequencies from 0.3 GHz to 6 GHz, evaluation of compliance with the exposure limits in § 1.1310 of this chapter is necessary if the ERP of the device is greater than ERP20cm in the formula below. If the ERP of a single RF source at distances from 20 centimeters to 40 centimeters and frequencies from 0.3 GHz to 6 GHz is not easily obtained, then the available maximum time-averaged power may be used (i.e., without consideration of ERP) in comparison with the following formula only if the physical dimensions of the radiating structure(s) do not exceed the electrical length of λ/4 or if the antenna gain is less than that of a half-wave dipole (1.64 linear value). 47 CFR 2.1091(c)(2) For multiple mobile or portable RF sources within a device operating in the same time averaging period, routine environmental evaluation is required if the formula in § 1.1307(b)(3)(ii)(B) of this chapter is applied to determine the exemption ratio and the result is greater than 1. Evaluation: S limit = 1 mW/cm 2 푆= 푃∗퐺 4∗휋∗푟 2 Where S = power density in mW/cm2 P = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm Max Field Strength = 80.77 dBuV/m @ 3m EIRP (dBm) = E (dBuV/m) +20 log [d (m)] - 104.77 EIRP = 80.77 + 9.54 -104.77 EIRP = -14.46 dBm = 0.036 mW < 1mW EUT is exempt from MPE assessment.

HEADQUARTERS: 914 WEST PATAPSCO AVENUE • BALTIMORE, MARYLAND 21230 • PHONE (410) 354-3300 • FAX (410) 354-3313 Report: WIR127472-FCC15.231 Rev. 3 © 2023, Eurofins Electrical and Electronic Testing NA, Inc. Page 1 of 32 Maryland | California | Texas www.metlabs.com September 16, 2023 Lutron Electronics Andrew Vaughn 7200 Suter Road Coopersburg, PA 18036 Dear Andrew Vaughn, Enclosed is the EMC Wireless test report for compliance testing of the Lutron Electronics, Caseta Bridge as tested to the requirements of Title 47 of the CFR, Ch. 1 (10-1-06 ed.), FCC Part 15 Subpart C for Intentional Radiators. Thank you for using the services of Eurofins Electrical and Electronic Testing NA, Inc. If you have any questions regarding these results or if Eurofins Electrical and Electronic Testing NA, Inc. can be of further service to you, please feel free to contact me. Sincerely, Michelle Tawmging Documentation Department Eurofins Electrical and Electronic Testing NA, Inc. Reference: (\Lutron Electronics\ WIR127472-FCC15.231 Rev. 3) Certificates and reports shall not be reproduced except in full, without the written permission of Eurofins Electrical and Electronic Testing NA, Inc. While use of the A2LA logo in this report reflects Eurofins Electrical and Electronic Testing NA, Inc. accreditation under these programs, the report must not be used by the client to claim product certification, approval, or endorsement by A2LA, or any agency of the Federal Government. This letter of transmittal is not a part of the attached report. HEADQUARTERS: 914 WEST PATAPSCO AVENUE • BALTIMORE, MARYLAND 21230 • PHONE (410) 354-3300 • FAX (410) 354-3313 Report: WIR127472-FCC15.231 Rev. 3 © 2023, Eurofins Electrical and Electronic Testing NA, Inc. Page 2 of 32 Maryland | California | Texas www.metlabs.com Electromagnetic Compatibility Criteria Test Report for the Lutron Electronics Caseta Bridge Tested under the FCC Certification Rules contained in Title 47 of the CFR, Part 15.231 Subpart C for Intentional Radiators Report: WIR127472-FCC15.231 Rev. 3 September 16, 2023 Prepared For: Lutron Electronics 7200 Suter Road Coopersburg, PA 18036 Prepared By: Eurofins Electrical and Electronic Testing NA, Inc. 914 W. Patapsco Avenue Baltimore, MD 21230 HEADQUARTERS: 914 WEST PATAPSCO AVENUE • BALTIMORE, MARYLAND 21230 • PHONE (410) 354-3300 • FAX (410) 354-3313 Report: WIR127472-FCC15.231 Rev. 3 © 2023, Eurofins Electrical and Electronic Testing NA, Inc. Page 3 of 32 Maryland | California | Texas www.metlabs.com Electromagnetic Compatibility Criteria Test Report for the Lutron Electronics Caseta Bridge Tested under the FCC Certification Rules contained in Title 47 of the CFR, Part 15.231 Subpart C for Intentional Radiators Report: WIR127472-FCC231 Donald Salguero, Project Engineer Wireless Lab Engineering Statement: The measurements shown in this report were made in accordance with the procedures indicated, and the emissions from this equipment were found to be within the limits applicable. I assume full responsibility for the accuracy and completeness of these measurements, and for the qualifications of all persons taking them. It is further stated that upon the basis of the measurements made, the equipment tested is capable of operation in accordance with the requirements of FCC Rules Part 15.231 under normal use and maintenance. Michael Griffiths Manager, Wireless Lab HEADQUARTERS: 914 WEST PATAPSCO AVENUE • BALTIMORE, MARYLAND 21230 • PHONE (410) 354-3300 • FAX (410) 354-3313 Report: WIR127472-FCC15.231 Rev. 3 © 2023, Eurofins Electrical and Electronic Testing NA, Inc. Page 4 of 32 Maryland | California | Texas www.metlabs.com Report Status Sheet Revision Report Date Reason for Revision  July 7, 2023 Initial Issue. 1 July 20, 2023 Updated Fundamental Field Strength - Test Results, Vertical table. 2 August 24, 2023 Added Measurement Uncertainty section. 3 September 16, 2023 Removed references to BDG-1 / L- BDG / L-BDGPRO PMNs throughout. HEADQUARTERS: 914 WEST PATAPSCO AVENUE • BALTIMORE, MARYLAND 21230 • PHONE (410) 354-3300 • FAX (410) 354-3313 Report: WIR127472-FCC15.231 Rev. 3 © 2023, Eurofins Electrical and Electronic Testing NA, Inc. Page 5 of 32 Maryland | California | Texas www.metlabs.com Table of Contents I. Executive Summary ...................................................................................................................................... 8 A. Purpose of Test ......................................................................................................................................... 9 B. Executive Summary ................................................................................................................................. 9 II. Equipment Configuration ........................................................................................................................... 10 A. Overview ................................................................................................................................................ 11 B. References .............................................................................................................................................. 11 C. Test Site.................................................................................................................................................. 11 D. Measurement Uncertainty ...................................................................................................................... 12 E. Equipment Overview and Test Configuration ........................................................................................ 12 F. Equipment Configuration ....................................................................................................................... 13 G. Support Equipment ................................................................................................................................. 13 H. Mode of Operation ..........................…

Text truncated - open the document above for the full version.

LUTRON ELECTRONICS CO., INC. 27 July 2023 Page 1 of 1 Antenna Specification Applicable Model Numbers: (herein referred to as DUT) BDG-1, L-BDG, L-BDG2, L- BDGPRO, L-BDGPRO2, RR-SEL- REP2 Antenna construction: The antenna is a coil antenna. The antenna connection points are permanently attached to the DUT and cannot be modified or replaced by the user as it is underneath the plastic enclosure. For further information on Antenna construction please see Operational Description. Frequency range capability: 431MHz-437MHz Antenna Photos: LUTRON ELECTRONICS CO., INC. 27 July 2023 Page 2 of 1

HEADQUARTERS: 914 WEST PATAPSCO AVENUE • BALTIMORE, MARYLAND 21230 • PHONE (410) 354-3300 • FAX (410) 354-3313 Maryland | California | Texas www.metlabs.com Report: WIR127472-Appendix Rev. 1 © 2023, Eurofins Electrical and Electronic Testing NA, Inc. Page 1 of 32 APPENDIX REV 1 WIR127472 FCC15.231 Data HEADQUARTERS: 914 WEST PATAPSCO AVENUE • BALTIMORE, MARYLAND 21230 • PHONE (410) 354-3300 • FAX (410) 354-3313 Maryland | California | Texas www.metlabs.com Report: WIR127472-Appendix Rev. 1 © 2023, Eurofins Electrical and Electronic Testing NA, Inc. Page 2 of 32 Report Status Sheet Revision Report Date Reason for Revision  July 10, 2023 Initial Issue. 1 July 20, 2023 Updated Fundamental Field Strength - Test Results, Vertical table. HEADQUARTERS: 914 WEST PATAPSCO AVENUE • BALTIMORE, MARYLAND 21230 • PHONE (410) 354-3300 • FAX (410) 354-3313 Maryland | California | Texas www.metlabs.com Report: WIR127472-Appendix Rev. 1 © 2023, Eurofins Electrical and Electronic Testing NA, Inc. Page 3 of 32 § 15.203 Antenna Requirement * No data or photographs available. HEADQUARTERS: 914 WEST PATAPSCO AVENUE • BALTIMORE, MARYLAND 21230 • PHONE (410) 354-3300 • FAX (410) 354-3313 Maryland | California | Texas www.metlabs.com Report: WIR127472-Appendix Rev. 1 © 2023, Eurofins Electrical and Electronic Testing NA, Inc. Page 4 of 32 § 15.207(a) Conducted Emissions Limits Figure 1: CE Data [120V60Hz, Line] Figure 2: CE Prescan [120V60Hz, Line] HEADQUARTERS: 914 WEST PATAPSCO AVENUE • BALTIMORE, MARYLAND 21230 • PHONE (410) 354-3300 • FAX (410) 354-3313 Maryland | California | Texas www.metlabs.com Report: WIR127472-Appendix Rev. 1 © 2023, Eurof…

Text truncated - open the document above for the full version.