K6KHSD-XIeNfusion HSD-Xi Aeronautical Satcom Terminal

23-15-30TITLE PAGE T-1 8 MAY 09 eNfusion™ HSD-Xi High-speed Data Terminal System Description, Installation, and Maintenance Manual MN-1252-42003, Revision B00 This document provides procedures for the equipment listed below. ModelPN eNfusion™ HSD-Xi High-speed Data Terminal 115 V ac 1252-A-4100-01 eNfusion™ External Subscriber Configuration Module (ESCM) 1252-A-4120-01 23-15-30TITLE PAGE T-2 8 MAY 09 PROPRIETARY STATEMENT This document contains information which is proprietary and confidential to EMS SATCOM (EMS Technologies Canada, Ltd.). Neither this document nor the information contained within may be used for any purpose other than the purpose for which it was prepared. Neither this document nor the information contained within may be disclosed or copied without the prior written permission of EMS SATCOM. © 2007, 2008, 2009 EMS Technologies Canada, Ltd. All Rights Reserved. Revision Table RevisionECRDescription A00N/AInitial release B00090543Updated interconnect drawing, added outline drawings Cabin Network Xcelerator® and CNX® are registered trademarks of EMS Technologies, Ltd. Windows is a registered trademark of Microsoft Corporation in the United States and other countries. Other product, brand, service, and company names herein are the trademarks of their respective owners. The AMBE® voice compression technology embodied in this product is protected by intellectual prope rty rights including patent rights, copyrights and trade secrets of Digital Voice Systems, Inc. This voice compression Technology is licensed solely for use within an INMARSAT satellite communications system. Our products are under continuous research and devel opment. Any information may therefore be changed without prior notice. EMS SATCOM reserves the right to make improvements or changes in the product described in this manual at any time without notice. While reasonable efforts have been made in the preparation of this document to assure its accuracy, EMS SATCOM assumes no liability resulting from any errors or omissions in this document, or from the use of the information contained herein. Printed in Canada. EMS SATCOM 400 Maple Grove Road, Ottawa, Ontario, K2V 1B8, CANADA EMS SATCOM Reception:(613) 591-9064 (613) 591-3086 (outside North America) EMS SATCOM Product Support:(888) 300-7415 (calls are routed to an on-call Product Supp ort specialist after regular business hours) +44 1684 290 020 (UK) EMS SATCOM E-mail Help: [email protected] EMS SATCOM Web site:www.emssatcom.com EMS SATCOM Sales and Marketing: (800) 600-9759 23-15-30CR-1 8 MAY 09 CUSTOMER RESPONSE FORM To help us improve the quality of our product documentation, EMS SATCOM would appreciate your comments and suggestions on this publication. Please complete the following customer survey and send to EMS SATCOM at: EMS SATCOM 400 Maple Grove Road Ottawa, ON, K2V 1B8 E-mail: [email protected] Date: Comments: Publication information: Customer information: Comments and suggestions: Publication number:MN-1252-42003 Publication title:eNfusion™ HSD-X and HSD-Xi High-speed Data Terminal System Description, Installation, and Maintenance Manual Latest issue date:8 MAY 09 Document revision:B00 Name: Company: Tel: Fax: Email: 23-15-30CR-2 8 MAY 09 Blank Page SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL eNfusion™ HSD-X and HSD-Xi High-speed Data Terminal 23-15-30RR-1 8 MAY 09 RECORD OF REVISIONS When revisions are received, insert revised pages, record the date, and initial. Revision Nu mber Issue Date Date Inserted Inserted by (in itial) Revision Number Issue Date Date Inserted Inserted by (initial) SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL eNfusion™ HSD-X and HSD-Xi High-speed Data Terminal 23-15-30RR-2 8 MAY 09 Blank Page Service Bulletin Number Subject Manual Rev. Nu mber Manual Rev. Date SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL eNfusion™ HSD-X and HSD-Xi High-speed Data Terminal 23-15-30SBL-1 8 MAY 09 SERVICE BULLETIN LIST SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL eNfusion™ HSD-X and HSD-Xi High-speed Data Terminal 23-15-30SBL-2 8 MAY 09 Blank Page SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL eNfusion™ HSD-X and HSD-Xi High-speed Data Terminal 23-15-30LEP-1 8 MAY 09 LIST OF EFFECTIVE PAGES * An asterisk indicates pages changed, added, or deleted by the current revision. F indicates a right foldout page with a blank back. SectionPageDate TITLE-PAGET-1May 8, 2009 INTROINTRO-1, INTRO-3 to INTR O-6 May 8, 2009 33-5, 3-9, 3-11, 3-13, 3-15 to 3- 22 May 8, 2009 SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL eNfusion™ HSD-X and HSD-Xi High-speed Data Terminal 23-15-30LEP-2 8 MAY 09 Blank Page SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL eNfusion™ HSD-X and HSD-Xi High-speed Data Terminal 23-15-30TC-1 8 MAY 09 TABLE OF CONTENTS INTRODUCTION 1. General ........................................................................................................... INTRO-1 2. How This document is Organized ................................................................ INTRO-1 3. Illustration of Equipment .............................................................................. INTRO-2 4. Product Terms and Conditions .................................................................... INTRO-2 5. Reference Documents ................................................................................... INTRO-2 6. Acronyms and Abbreviations ....................................................................... INTRO-3 7. Safety Advisories........................................................................................... INTRO-5 SYSTEM DESCRIPTION 1. Inmarsat System Overview .................................................................................... 1-1 2. Equipment Overview .............................................................................................. 1-3 A.HSD-Xi .........................................................................…

Text truncated - open the document above for the full version.

FlttrS*- Avrnloiv l:\'lS'f'cchnrrltrsics (llrtutla l.ttl. I:\lS r\r iatiort - Ottarva J(X) Nllplc Cxrve lìoad Otturv¿r. O\ K2V lll¡ì Cirnarla 'I'cl. t-I (rl.l 59 190(14 Iìlx. .r I (r l.l .)91 9l 20 rvrvrv.crìlsA viltti o¡t.co ¡ìì 11 March 2010 Federal Aviation Administration Office of Spectrum Policy and Management ASR-1 800 lndependence Avenue, SW Washington D.C.20591 Reference: FAA Notification of FCC Equipment under FCC Part 87 HSD-440, HSD-400, HSD.I28, HSD-X, HSD-X¡ Aeronautical Satellite Communications Transceivers FCC l.D.'s K6KHSD-440, K6KHSD-400, K6KHSD-128, K6KHSD.X, KOKHSD-X¡ Dear Sir, ln accordance with Federal Communications Commission (FCC) Rules and Regulations, Part 87.147(d), EMS Technologies Canada, Ltd. hereby notifies the Federal Aviation Administration of ¡ts filing with the FCC of an application for Certification of the HSD Aeronautical Satellite Communications Transceiver models referenced above. Please find below the information required pursuant to Part 87.1a7(d)(1); 1) Description of Equipment The High Speed Data (HSD) unit is a line replaceable unit (LRU) of the SATCOM earth station. lt is packaged in an 8 Modular Concept Unit (MCU)footprint and mounted in accordance with ARINC 600. Depending on the modelconfigurat¡on, the HSD supports Flight Deck Navigation and Mission Systems Access to the lnternet by providing connectivity to the following INMARSAT communication services: o INMARSAT ISDN SCPC (Single Channel Per Carrier) Service o INMARSAT MPDS (Mobile Packet Data Services) o INMARSAT Aero P, R, T channeldata o INMARSAT Aero C channel H+ voice o INMARSAT SwiftBroadband (BGAN) Service MCDU (x2) orWSCI (x2) ill - - ,röÀnêrì -..';.i'.- cuu I I r:,i , ttzl I : . .i-:,. ì: Cmtãl Maintenân@ Sçttt6a s.dtcer Computd (CMC) loll Quality Vo¡ca (64 kbps) 3.'l kHz audio i -i-s*!- 's\-T*\*- \ '.1 -l > Ethemt tsoN sLtc 4.wirc 56, 64 kbps ciroit sitchcd dalå g kbps pâckel-silch€d daùa SwlftBrôâdband Satulcotl Toll O@lity Voiæ (ô4 tbps) AMBE+2 Vok¡ 3.1 kHz audio 56, 64 kbps cì[email protected] dalia Up to 432 kbps pækelswitched data Aero+lrll+ Seill@. 4.8 kþs voirx Up to f0.5 tbos oad(et-switcàed data Syst€m Cfffig Slrsps Diseto UO Rryùp ns, es. 40r{ s : mrcTatmt i i@i r lÞ!!' i Fig 1. Sample configuration that illustrates the relationship of the HSD to other elements of the Aircraft Earth Station svstem ^Avrnnoru 2l Manufacturer's ldentification lnput Product Deæription Power Service Tvpe HSD-128 DC2xSW-64 HSD-4OO AC4xSW-64;2xSBB HSD.44O Dual 2xOlassic ;2xSW64; 1 xSBB HSD.X AC lxSW-64 HSD.X AC 2xSW-64;1xSBB 3) AntennaCharacteristics The HSD is designed to operate with lnmarsat approved Satcom aeronautical antenna systems. These antennas meet the requirements of ARINC characteristics 741 and/or 781 and RTCA/DO-210. 4) Rated Output Power 60w 5) Emission Types and Characteristics Service Data Rate lkbos) symþor Rate ksyrn/sec ttilodulation Twe FCC DESIG Arth BW Oassic FVT 0.6 0.6 PI/2 BPSK 8401-G1D25 Classic FVT 1.2 1.2 FV2 BPSK 1K68G1D 25 Classic Fl/T 10.5 5.25 \viation QPSI 1OK5G1D 25 Oassic C 8.4 4.2 \viation QPSI 6K8OG1E 25 Sw ift64: TDil4 Signaling 3 3 BPSK 21 KOGI D25 Sw ift64: Mni M Alr¡BE Voice 5.6 2.8 Offset QPSK 7le0c1E45 Swift64134.4 3[].6 QAM16 4OKOG1E45 Swift64 MFDS 1.3r'..4 33.6 QAM16 4OKOG1 D 45 Sw iftbroadþand 33.6 16.8 OPSK 25KOG7W 225 Sw iftbroadband67.2 33.6 OPSK sOKOGTW 225 Sw iftbroadband 't9,4 67.2 QPSK lOOKGTW 225 Sw iftbroadband 302.4 151.2 OPSK 2OOKGTW 225 Sw iftbroadband 13/..4 33.6 QAM 50K0D7W 225 Sw iftbroadband 268.8 67.2 OAM lOOKDTW 225 Sw iftbroadband 604.8 1sl.2 QAM 20OKDTW 225 1.,!lS'l'cclrrrolrrsics Ca¡rada L.rtl. 'l'cl. +l ó11.59 I 90(14 f:NlS Aviation - Ottarvu l:ax. -¡ I ó ll .591 9120 400 Maplc Cìrovc lìoad u,rvrv.cnlsaviati()rì.c()nl Ottarva. ON K2V IIìtì Canacla Avnnoru EMS Technologies Canada Ltd. EMS Aviation - Ottawa 400 Maple Grove Road Ottawa, ON K2V lB8 Canada Tel. +l 613 591 9064 Fax. +l 613 591 9120 www.emsaviation.com 6) Frequencies of Operat¡on 1626.5 to 1660.5 MHz transmitting 1525 to 1559 MHz receiv¡ng n ReceiverGharacteristics As defined in the lnmarsat System Definition Manuals (SDMs) and RTCA/DO-2I0 as appl¡cable. lf this information meets with your approval, EMS herein requests that your office notify the FCC's CIfice of Engineering and Technology Laboratory, Authorization and Evaluation Division, in order to indicate that, pursuant to Section 87.147(dX2) of the FCC's rules, the FAA does not have an obiection to the certificat¡on of the equipment described in this letter. lf you have any questions on the above information, please feel free to contact me directly. Sincerely, (#Jl" Ron Halka Direetor of Business Process lmprovement and Quality EMS Aviation Ottawa

CONFIDENTIAL, UNPUBLISHED PROPERTY OF ONE OR MORE OF THE FOLLOWING - EMS TECHNOLOGIES CANADA, LTD., FORMATION INC., SKY CONNECT LLC (COLLECTIVELY “E MS AVIATION”). USE AND DISTRIBUTION LIMITED SOLELY TO AUTHORIZED PERSONNEL The use, disclosure, reproduction, modification, transfer or transm ittal of this work for any purpose, in any form, or by any m eans without the prior written permission of EMS Aviation is strictly prohibited. This document does not contain technical data as defined in the International Traffic and Arms Regulations (ITAR) 22 CFR 120-130. Figure 1: HSD-XI Front View Page 1 CONFIDENTIAL, UNPUBLISHED PROPERTY OF ONE OR MORE OF THE FOLLOWING - EMS TECHNOLOGIES CANADA, LTD., FORMATION INC., SKY CONNECT LLC (COLLECTIVELY “E MS AVIATION”). USE AND DISTRIBUTION LIMITED SOLELY TO AUTHORIZED PERSONNEL The use, disclosure, reproduction, modification, transfer or transm ittal of this work for any purpose, in any form, or by any m eans without the prior written permission of EMS Aviation is strictly prohibited. This document does not contain technical data as defined in the International Traffic and Arms Regulations (ITAR) 22 CFR 120-130. Figure 2: HSD-XI Isometric View Page 2 CONFIDENTIAL, UNPUBLISHED PROPERTY OF ONE OR MORE OF THE FOLLOWING - EMS TECHNOLOGIES CANADA, LTD., FORMATION INC., SKY CONNECT LLC (COLLECTIVELY “E MS AVIATION”). USE AND DISTRIBUTION LIMITED SOLELY TO AUTHORIZED PERSONNEL The use, disclosure, reproduction, modification, transfer or transm ittal of this work for any purpose, in any form, or by any m eans without the prior written permission of EMS Aviation is strictly prohibited. This document does not contain technical data as defined in the International Traffic and Arms Regulations (ITAR) 22 CFR 120-130. Figure 3: HSD-XI Side View Page 3 CONFIDENTIAL, UNPUBLISHED PROPERTY OF ONE OR MORE OF THE FOLLOWING - EMS TECHNOLOGIES CANADA, LTD., FORMATION INC., SKY CONNECT LLC (COLLECTIVELY “E MS AVIATION”). USE AND DISTRIBUTION LIMITED SOLELY TO AUTHORIZED PERSONNEL The use, disclosure, reproduction, modification, transfer or transm ittal of this work for any purpose, in any form, or by any m eans without the prior written permission of EMS Aviation is strictly prohibited. This document does not contain technical data as defined in the International Traffic and Arms Regulations (ITAR) 22 CFR 120-130. Figure 4: HSD-XI Top View Page 4 CONFIDENTIAL, UNPUBLISHED PROPERTY OF ONE OR MORE OF THE FOLLOWING - EMS TECHNOLOGIES CANADA, LTD., FORMATION INC., SKY CONNECT LLC (COLLECTIVELY “E MS AVIATION”). USE AND DISTRIBUTION LIMITED SOLELY TO AUTHORIZED PERSONNEL The use, disclosure, reproduction, modification, transfer or transm ittal of this work for any purpose, in any form, or by any m eans without the prior written permission of EMS Aviation is strictly prohibited. This document does not contain technical data as defined in the International Traffic and Arms Regulations (ITAR) 22 CFR 120-130. Figure 5: HSD-XI Back View Page 5 CONFIDENTIAL, UNPUBLISHED PROPERTY OF ONE OR MORE OF THE FOLLOWING - EMS TECHNOLOGIES CANADA, LTD., FORMATION INC., SKY CONNECT LLC (COLLECTIVELY “E MS AVIATION”). USE AND DISTRIBUTION LIMITED SOLELY TO AUTHORIZED PERSONNEL The use, disclosure, reproduction, modification, transfer or transm ittal of this work for any purpose, in any form, or by any m eans without the prior written permission of EMS Aviation is strictly prohibited. This document does not contain technical data as defined in the International Traffic and Arms Regulations (ITAR) 22 CFR 120-130. Figure 6: HSD-XI Bottom Page 6

APPDCHKBYDATEDESCRIPTIONCHG ORGREV THIS DOCUMENT CONTAINS INFORMATION WHICH IS PROPRIETARY AND CONFIDENTIAL TO EMS TECHNOLOGIES. THIS INFORMATION MAY NOT BE USED, DISCLOSED OR COPIED, IN WHOLE OR IN PART, WITHOUT THE PRIOR WRITTEN PERMISSION OF EMS TECHNOLOGIES. CONTRACT/PROJECT APPROVALS DRAWN SIGNDATE CHECKED MECH. ELECT. MFG ENG PASIZEFSCM NO.DWG. NO.REV CMO PGM MGRSCALE TITLE LIBRARYSHEETOF © EMS TECHNOLOGIES. ALL RIGHTS RESERVED. 400 MAPLE GROVE ROAD OTTAWA, ONTARIO K2V 1B8 HSD -Xi, FCC ID LABEL HSD A38473 1110-D-0128 1110D0128RevA00 11NTS Mark Boyle 31MAR2010 A NOTE: 1. USE BLANK LABEL STOCK (ITEM 10) WITH ARTWORK 1110-G-0128 (ITEM 30) TO PERMANENTLY MARK IDENTIFICATION LABEL FOR: - FCC ID. - FCC Statement 2. THE BORDERS OF THE LABEL ARE SHOWN FOR ORIENTATION PURPOSES ONLY. 3. PROTECT COMPLETED LABEL BY APPLYING OVERLAMINATE (ITEM 20). 4. IF REQUIRED, CUT THE LABEL TO THE SIZE SHOWN. 0.75” 2.25” This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. FCC ID: K6KHSD-XI

CONFIDENTIAL, UNPUBLISHED PROPERTY OF ONE OR MORE OF THE FOLLOWING - EMS TECHNOLOGIES CANADA, LTD., FORMATION INC., SKY CONNECT LLC (COLLECTIVELY “E MS AVIATION”). USE AND DISTRIBUTION LIMITED SOLELY TO AUTHORIZED PERSONNEL The use, disclosure, reproduction, modification, transfer or transm ittal of this work for any purpose, in any form, or by any m eans without the prior written permission of EMS Aviation is strictly prohibited. This document does not contain technical data as defined in the International Traffic and Arms Regulations (ITAR) 22 CFR 120-130. L IST OF F IGURES F IGURE 1: 1110 ‐ A ‐ 0604 D ATA P ROCESSOR T OP ........................................................................................................................................................................................................................ 2 F IGURE 2: 1110 ‐ A ‐ 0604 D ATA P ROCESSOR B OTTOM ................................................................................................................................................................................................................. 3 F IGURE 3: 1210 ‐ A ‐ 0010 ‐ 03 HST BGAN 1 C HANNEL C ARD T OP ................................................................................................................................................................................................. 4 F IGURE 4: 1210 ‐ A ‐ 0010 ‐ 03 HST BGAN 1 C HANNEL C ARD B OTTOM ........................................................................................................................................................................................... 5 F IGURE 5: HST D IGITAL M ODULE 1210 ‐ A ‐ 0002 ‐ 03 T OP (P ART OF THE HST BGAN 1 C HANNEL C ARD ) .............................................................................................................................................. 6 F IGURE 6: HST D IGITAL M ODULE 1210 ‐ A ‐ 0002 ‐ 03 B OTTOM (P ART OF THE HST BGAN 1 C HANNEL C ARD ) ....................................................................................................................................... 7 F IGURE 7: 1210 ‐ A ‐ 0003 RF M ODULE T OP (P ART OF THE HST BGAN 1 C HANNEL C ARD ) ................................................................................................................................................................. 8 F IGURE 8: 1210 ‐ A ‐ 0003 RF M ODULE B OTTOM (P ART OF THE HST BGAN 1 C HANNEL C ARD ) .......................................................................................................................................................... 8 F IGURE 9: 1110 ‐ F ‐ 0617 OXCO T OP ....................................................................................................................................................................................................................................... 9 F IGURE 10: 1110 ‐ F ‐ 0617 OXCO B OTTOM ............................................................................................................................................................................................................................ 10 F IGURE 11: 1110 ‐ F ‐ 0617 OXCO I NSTALLED .......................................................................................................................................................................................................................... 11 F IGURE 12: 1110 ‐ F ‐ 0304 HST P OWER S UPPLY T OP ................................................................................................................................................................................................................ 12 F IGURE 13: 1110 ‐ F ‐ 0304 HST P OWER S UPPLY B OTTOM .......................................................................................................................................................................................................... 13 F IGURE 14: 1110 ‐ A ‐ 0630 O UTPUT A MPLIFIER T OP ................................................................................................................................................................................................................. 14 F IGURE 15: 1110 ‐ A ‐ 0630 O UTPUT A MPLIFIER B OTTOM ........................................................................................................................................................................................................... 15 F IGURE 16: 1110 ‐ A ‐ 0210 O UTPUT A MPLIFIER CCA T OP (P ART OF THE O UTPUT A MPLIFIER ) ........................................................................................................................................................... 16 F IGURE 17: 1110 ‐ A ‐ 0210 O UTPUT A MPLIFIER CCA B OTTOM (P ART OF THE O UTPUT A MPLIFIER ) .................................................................................................................................................... 16 F IGURE 18: C OMPONENTS IN C HASSIS ..................................................................................................................................................................................................................................... 17 Page 1 CONFIDENTIAL, UNPUBLISHED PROPERTY OF ONE OR MORE OF THE FOLLOWING - EMS TECHNOLOGIES CANADA, LTD., FORMATION INC., SKY CONNECT LLC (COLLECTIVELY “E MS AVIATION”). USE AND DISTRIBUTION LIMITED SOLELY TO AUTHORIZED PERSONNEL The use, disclosure, reproduction, modification, transfer or transm ittal of this work for any purpose, in any form, or by any m eans without the prior written permission of EMS Aviation is strictly prohibited. This document does not contain technical data as defined in the International Traffic and Arms Regulations (ITAR) 22 CFR 120-130. Figure 1: 1110-A-0604 Data Processor Top Page 2 CONFIDENTIAL, UNPUBLISHED PROPERTY OF ONE OR MORE OF THE FOLLOWING - EMS TECHNOLOGIES CANADA, LTD., FORMATION INC., SKY CONNECT LLC (COLLECTIVELY “E MS…

Text truncated - open the document above for the full version.

Compliance Testing 3356 N. San Marcos Place, Suite 107 Chandler, Arizona 85225-7176 (866) 311-3268 phone, (480) 926-3598 fax p1030010, d1040002 Rev 3.0 Date: April 2, 2010 Applicant: EMS Technologies Canada, Ltd 400 Maple Grove Rd Ottawa, ON K2V 1B8 Canada Attention of: Ron Halka - Director, Business Process Improvement & Quality Ph: (613) 591-9064 Ext. 3244 Fax: (613) 591-9107 E-mail: [email protected] Equipment: HSD-XI FCC ID: K6KHSD-XI FCC Rules: Part 87 Gentlemen: Enclosed please find your copy of the Engineering Test Report for which you are subject to the restrictions as listed on the attached summary. Once a Telecommunication Certification Body (TCB) issues a Grant the Federal Communication Commission (FCC) has 30 days to review the application and request added information. It is your decision whether or not to market the equipment subject to a possible recall before the end of the 30 days. If your equipment is still retained by us, it will be returned to you 30 days after approval is achieved. Our invoice for services has been directed to your Accounts Payable Department. For any additional information please contact us. Thank you. Sincerely yours, John Erhard, Engineering Manager Compliance Testing 3356 N. San Marcos Place, Suite 107 Chandler, Arizona 85225-7176 (866) 311-3268 phone, (480) 926-3598 fax p1030010, d1040002 Rev 3.0 Summary of Restrictions 1. All submissions to the FCC are subject to their Examiner's interpretation. 2. Please allow from 60 to 90 days before hearing from the FCC with regard to any submission. 3. The FCC can set aside any action or modify any action, within 30 days. (FCC Rule 1.108, 1.113). 4. Under Rule 2.803, if device is not type accepted/certificated then it must not be sold, leased, offered for sale, imported, shipped or distributed or advertised for sale. 5. FCC can revoke its certificates at any time if the equipment does not meet or continue to meet their Rules. (Rule Parts 2.927, 2.939). 6. FCC can request a sample at any time (2.936). Compliance Testing 3356 N. San Marcos Place, Suite 107 Chandler, Arizona 85225-7176 (866) 311-3268 phone, (480) 926-3598 fax p1030010, d1040002 Rev 3.0 Date: April 2, 2010 Federal Communications Commission Via: Electronic Filing Attention: Authorization & Evaluation Division Applicant: EMS Technologies Canada, Ltd Equipment: HSD-XI FCC ID: K6KHSD-XI FCC Rules: Part 87 Dear Gentleman: On behalf of the Applicant, enclosed please find Application Form 731, Engineering Test Report and all pertinent documentation, the whole for approval of the referenced equipment as shown. We trust the same is in order. Should you need any further information, kindly contact the writer who is authorized to act as agent. Best regards, John Erhard, Engineering Manager Compliance Testing 3356 N. San Marcos Place, Suite 107 Chandler, Arizona 85225-7176 (866) 311-3268 phone, (480) 926-3598 fax p1030010, d1040002 Rev 3.0 Test Report for FCC ID: K6KHSD-XI Model: HSD-XI to Federal Communications Commission Rule Part(s) 87 Date of report: April 2, 2010 On the Behalf of the Applicant: EMS Technologies Canada, Ltd At the Request of: EMS Technologies Canada, Ltd 400 Maple Grove Rd Ottawa, ON K2V 1B8 Canada Attention of: Ron Halka - Director, Business Process Improvement & Quality Ph: (613) 591-9064 Ext. 3244 Fax: (613) 591-9107 E-mail: [email protected] Reviewed by: John Erhard, Engineering Manager Compliance Testing 3356 N. San Marcos Place, Suite 107 Chandler, Arizona 85225-7176 (866) 311-3268 phone, (480) 926-3598 fax p1030010, d1040002 Rev 3.0 Test Report Revision History Revision Date Revised By Reason for revision 1.0 April 2, 2010 J. Erhard Original Document 2.0 April 12, 2010 K Springer Correct table heading reference from HSP-440 to HSD-440 page 9 thru page 22 3.0 April 15, 2010 K Springer Changed Xi Model info and FCC ID info to XI Compliance Testing 3356 N. San Marcos Place, Suite 107 Chandler, Arizona 85225-7176 (866) 311-3268 phone, (480) 926-3598 fax p1030010, d1040002 Rev 3.0 List of Exhibits (FCC Certification (Transmitters) - Revised 9/28/98) Applicant: EMS Technologies Canada, Ltd FCC ID: K6KHSD-XI By Applicant: 1. Letter of Authorization 2. Confidentiality Request: 0.457 And 0.459 3. Identification Drawings, 2.1033(c)(11) Label Location of Label Compliance Statement Location of Compliance Statement 4. Photographs, 2.1033(c)(12) 5. Documentation: 2.1033(c) (3) User Manual (9) Tune Up Info (10) Schematic Diagram (10) Circuit Description Block Diagram Parts List Active Devices By Compliance Testing: A. Testimonial & Statement of Certification Compliance Testing 3356 N. San Marcos Place, Suite 107 Chandler, Arizona 85225-7176 (866) 311-3268 phone, (480) 926-3598 fax p1030010, d1040002 Rev 3.0 The Applicant has been cautioned as to the following: 15.21 Information to the User. The users manual or instruction manual for an intentional radiator shall caution the user that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 15.27(a) Special Accessories. Equipment marketed to a consumer must be capable of complying with the necessary regulations in the configuration in which the equipment is marketed. Where special accessories, such as shielded cables and/or special connectors are required to enable an unintentional or intentional radiator to comply with the emission limits in this part, the equipment must be marketed with, i.e. shipped and sold with, those special accessories. However, in lieu of shipping or packaging the special accessories with the unintentional or intentional radiator, the responsible party may employ other methods of ensuring that the special accessories are provided to the consumer, without additional charge. Information detailing any alternative method used to supply the special accessories for a grant of equipment authorization or retained in the verification records, as appropriate. The party responsibl…

Text truncated - open the document above for the full version.

Page 1 of 2 Test Setup Photos: EMS: HSD-Xi Conducted Conducted #2 Page 2 of 2 Radiated Radiated #2