K7S-03609Wireless-AC USB Adapter

WUSB6300 8820-03115 Rev.A00 If the computer you want to use the adapter with doesn’t have an internet connection, find another computer that does, then: You’ll need to download and install drivers before using your adapter: 1. On a computer with an internet connection, visit www.linksys.com/support/WUSB6300 in a web browser. 2. Click on Downloads/Firmware. 3. Choose Version 2.0. 4. Download the driver package for the version of your computer’s operating system (Mac or Windows). 5. WIN: Unzip the folder and double-click the Setup.exe file and follow the on-screen instructions. MAC: Unzip the folder and double-click the Setup.dmg file and follow the on-screen instructions. 1. Visit www.linksys.com/support/WUSB6300 in a web browser. 2. Click on Downloads/Firmware. 3. Choose Version 2.0. 4. Download the driver package for the version of your computer’s operating system (Mac or Windows). 5. Save the folder to a removable storage device. 6. Eject the storage device and insert it into the computer you want to use with the adapter. 7. Navigate to the drivers folder on the storage device, 8. WIN: Unzip the folder and double-click the Setup.exe file and follow the on-screen instructions. MAC: Unzip the folder and double-click the Setup.dmg file and follow the on-screen instructions. If you can’t set up your adapter with one of the above methods, visit linksys.com/support for more options. Internet: linksys.com/support or Twitter: @LinksysCares. Phone: 800-362-7114 (complimentary support during your warranty period) Quick Start Guide DUAL-BAND WiFi 5 USB Adaptor 127.00 x 127.00 x 127.00 Business Unit: Program Manager: Packaging Engineer: Material: Blank Size (in): Side Shown: L x W x D (mm): DIE LAYOUT 0 Unit: Flute/Grain: REV Final PRINT SIDE 5 x 5 x 5 L x W x D (in): 127 [5] 127 [5] QSG - 157 GSM C2S ARTPAPER FRONT BACK IN/MM Drawing Scale 1:1 Retail Outside Dimension (Including Hang Tab) DO NOT PRINT DIE LINES, PRINTERS NOTES PRINT SPECS: LEGEND: 127 x 127 5 x 5 Die Line File: NET-Networking Brian Byrd Please refer to drawing FDL_MSKU_5 X 5_2 PAGE_QSG Color Plates: Notes: Artwork File: horizontal 00 RELEASE DATE: 09/13/2018 Tolerance:+/- 1/32" - 0.8mm Blank Size (mm): Finish: DIELINE: THIS DOCUMENT & THE INFORMATION IN IT ARE THE CONFIDENTIAL PROPERTY OF BELKIN INTERNATIONAL AND MUST NOT BE COPIED, REPRODUCED OR USED IN ANY MANNER WITHOUT THE WRITTEN CONSENT OF BELKIN CORPORATION. IT MUST BE RETURNED UPON REQUEST This dieline works for following skus (if any): GLOSS AQ DIE/MATERIAL SPECS: Screen Glue Nitto Tape 127.00 x 127.00 x 127.00 Business Unit: Program Manager: Packaging Engineer: Material: Blank Size (in): Side Shown: L x W x D (mm): DIE LAYOUT 0 Unit: Flute/Grain: REV Final PRINT SIDE 5 x 5 x 5 L x W x D (in): 127 [5] 127 [5] QSG - 157 GSM C2S ARTPAPER FRONT BACK IN/MM Drawing Scale 1:1 Retail Outside Dimension (Including Hang Tab) DO NOT PRINT DIE LINES, PRINTERS NOTES PRINT SPECS: LEGEND: 127 x 127 5 x 5 Die Line File: NET-Networking Brian Byrd Please refer to drawing FDL_MSKU_5 X 5_2 PAGE_QSG Color Plates: Notes: Artwork File: horizontal 00 RELEASE DATE: 09/13/2018 Tolerance:+/- 1/32" - 0.8mm Blank Size (mm): Finish: DIELINE: THIS DOCUMENT & THE INFORMATION IN IT ARE THE CONFIDENTIAL PROPERTY OF BELKIN INTERNATIONAL AND MUST NOT BE COPIED, REPRODUCED OR USED IN ANY MANNER WITHOUT THE WRITTEN CONSENT OF BELKIN CORPORATION. IT MUST BE RETURNED UPON REQUEST This dieline works for following skus (if any): GLOSS AQ DIE/MATERIAL SPECS: Screen Glue Nitto Tape QSG_WUSB6300v2_8820-03115_RevA00_AC1200DB_USB_Adapter C Y M K PMS 3005 MAGENTA INDICATES SPOT AQ GLOSS - MAGENTA COLOR DOES NOT PRINT ALL TEXT AND GRAPHIC ELEMENTS COLOR: CMYK, PMS 3005C, PMS .25" .25".25" .25" .25" .15" .15" .15" .15" .25" Y .09" INNOVATION CREATIVE GROUP 263903 FILE NAME QSG_WUSB6300v2_8820-03115_RevA00_AC1200DB_USB_Adapter SKU# WUSB6300v2 P# 8820-03115 REV A00 DESIGNER Jonathan/Shiho DAT E 10/15/20 5:57 PM VERSION 04

FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This product has been tested and complies with the specifications for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used according to the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which is found by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna • Increase the separation between the equipment and devices • Connect the equipment to an outlet other than the receiver’s • Consult a dealer or an experienced radio/TV technician for assistance FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. 2.4GHz operation of this product in the USA is firmware-limited to channels 1 through 11. The device for the band 5150-5250 MHz is only for indoor usage. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 5 mm between the radiator and your body. This device and its antennas(s) must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. Additional requirements for the band 5600-5650 MHz Until further notice, devices subject to this Section shall not be capable of transmitting in the band 5600-5650 MHz, so that Environment Canada weather radars operating in this band are protected. Wireless Disclaimer The maximum performance for wireless is derived from IEEE Standard 802.11 specifications. Actual performance can vary, including lower wireless network capacity, data throughput rate, range and coverage. Performance depends on many factors, conditions and variables, including distance from the access point, volume of network traffic, building materials and construction, operating system used, mix of wireless products used, interference and other adverse conditions. Safety Notices English WARNING: Do not use this product near water, for example, in a wet basement or near a swimming pool. WARNING: Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning. WARNING: The power adaptor is the equipment ́s disconnection device. The power outlet must be located nearby the equipment and its access must be easy. This product is intended for indoor use only. Español ADVERTENCIA: No use este producto cerca del agua, por ejemplo en un sotano húmedo o cerca de una piscina. ADVERTENCIA: Evite usar este producto durante una tormenta eléctrica. Puede existir el riesgo remoto de que se produzca una descarga eléctrica producida por un rayo. ADVERTENCIA: El adaptador de alimentación es el dispositivo de desconexión del equipo. La base de toma de corriente debe estar cerca del equipo y ser fácilmente accessible. Este producto está destinado solo para uso en interiores. Third-Party Software or Firmware The use of software or firmware not supported/provided by Linksys products may result that the equipment is no longer compliant with the regulatory requirements. 8850-01323 Rev. A01 WARRANTY AND SUPPORT INFORMATION IMPORTANT! PLEASE RETAIN PROOF OF PURCHASE AND PRODUCT WARRANTY INFORMATION LIMITED WARRANTY (UNITED STATES AND CANADA) This warranty is provided to you by Belkin International, Inc, or one of its subsidiaries or affiliates (“Belkin”) IMPORTANT NOTICE REGARDING YOUR CONSUMER RIGHTS The benefits we give in this manufacturer’s warranty are additional to any rights and remedies that you may have under local consumer protection laws. Nothing in this warranty limits or affects your legal rights. This manufacturer’s warranty is governed by the laws of the country in which you purchased your Belkin, Linksys or Wemo product. In many countries, consumers have rights under local consumer laws. Those consumer rights may differ between countries, states and provinces, and often cannot be excluded. Your local consumer rights organization can advise you on your legal rights. This manufacturer’s warranty is not intended to: • change or exclude any rights under consumer law that cannot be lawfully changed or excluded; or • limit or exclude any right you have against the person who sold the Belkin, Linksys or Wemo product to you if that person has breached their sales contract with you. WHAT DOES THIS WARRANTY COVER? Belkin warrants that the product hardware and any software media (i.e., media on which the product software is provided) will be free from defects in materials and workmanship under normal use during the Warranty Period described below. This means that the product won’t be defective, and that it will look and work as advertised during the relevant period. This warranty does not apply to products purchased from a source other than Belkin or a Belkin Authorized Reseller. How long is the product warranted? Belkin warrants that the hardware in this Belkin, Linksys or Wemo product, and any associated software media, will be free from defects in materials and workmanship under normal use during the Warranty Period. The Warranty Period begins on the date the product was purchase…

Text truncated - open the document above for the full version.

Regulatory Information FCC Compliance Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This product has been tested and complies with the specifications for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used according to the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which is found by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna • Increase the separation between the equipment and devices • Connect the equipment to an outlet other than the receiver’s • Consult a dealer or an experienced radio/TV technician for assistance FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. IEEE 802.11b or 802.11g operation of this product in the USA is firmware-limited to channels 1 through 11. The device for the band 5150-5250 MHz is only for indoor usage to reduce the potential for harmful interference to co-channel mobile satellite systems. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 5 mm between the radiator and your body. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. Innovation, Science and Economic Development Canada Compliance Statement CAN ICES-3 (B)/NMB-3 (B) This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. The device could automatically discontinue transmission in case of absence of information to transmit, or operational failure. Note that this is not intended to prohibit transmission of control or signaling information or the use of repetitive codes where required by the technology. Innovation, Science and Economic Development Canada Radiation Exposure Statement This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 5 mm between the radiator & your body. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with ISED multi-transmitter product procedures. Restrictions in the 5 GHz Band The device for the band 5150-5250 MHz is only for indoor usage to reduce potential for harmful interference to co-channel mobile satellite systems. This device has been designed to operate with an antenna having a maximum gain of 1.54 dBi and 3.3 dBi at 2.4 GHz and 5 GHz respectively. Antennas having a higher gain is strictly prohibited per regulations of ISED. The required antenna impedance is 50 ohms. The maximum antenna gain (Please see the table below) permitted (for devices in the bands 5250-5350 MHz and 5470-5725 MHz) to comply with the EIRP limit and because high power radars are allocated as primary users (meaning they have priority) in 5250-5350 MHz and 5650-5850 MHz, these radars could cause interference and/or damage to license exempt LAN devices. No.Antenna Type2.4 GHz Gain (peak)5 GHz Gain (peak)Antenna Connector 1PCB1.54 dBi2.74 dBiN/A 2PCB1.51 dBi3.3 dBiN/A Additional requirements for the band 5600-5650 MHz Until further notice, devices subject to this section shall not be capable of transmitting in the band 5600-5650 MHz, so that Environment Canada weather radars operating in this band are protected. Avis d’Innovation, Sciences et Développement économique Canada CAN ICES-3 (B)/NMB-3 (B) L’exploitation est autorisée seulement aux conditions suivantes: (1) l’appareil ne doit pas produire de brouillage, et (2) il doit accepter tout brouillage radioélectrique reçu, même si ce brouillage est susceptible de compromettre le fonctionnement du dispositif. Pour les produits disponibles sur le marché aux États-Unis et au Canada, seuls les canaux de 1 à 11 peuvent être utilisés. La sélection d’autres canaux n’est pas possible. Le dispositif peut automatiquement cesser d’émettre en cas d’absence d’informations à transmettre, ou à cause d’une défaillance technique. Notez que l’objet n’est pas d’interdire la transmission des informations de contrôle ou de signalisation ou l’utilisation de codes répétitifs lorsque requis par la technologie. Avis d’Innovation, Sciences et Développement économique Canada concernant l’exposition aux radiofréquences Ce matériel est conforme aux limites établies par ISED en matière d’exposition aux radiofréquences dans un environnement non contrôlé. Ce matériel doit être installé et utilisé à une distance d’au moins 5 mm entre l’antenne et le corps de l’utilisateur. Cet appareil et son (ses) antenne (s) ne doivent pas être situés à proximité ou fonctionner en association avec une autre antenne ou un autre émetteur au…

Text truncated - open the document above for the full version.

SCS-F18: Project and Product Certification Representative Authorization Letter Page 1 of 2 Rev 6.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Project and Product Certification Representative Authorization Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Revised wording (obsolete) 1.0 2.0 Sept–25-2007 Updated company template (obsolete) 2.0 3.0 Jan-31-2012 Updated letter information (obsolete) 3.0 4.0 May-23-2014 Added FCC ID field (obsolete) 4.0 5.0 Sep-16-2014 Updated company name & logo (current) 5.0 6.0 Jun-27-2018 SCS-F18: Project and Product Certification Representative Authorization Letter Page 2 of 2 Rev 6.0 Belkin International, Inc. 12045 East Waterfront Dr. Playa Vista, California 90094, United States Date: 2020-11-03 To: BVCPS, INC. 775 Montague Expressway, Milpitas, CA 95035 USA Dear Sir/Madam, Re: Product Certification Representative Authorization Letter We, _____ Belkin International, Inc., _____ hereby authorize Bureau Veritas Consumer Product Services, Inc. to act as a Certification Body for certifying for the following project(s): FCC ID: K7S-03609 Product Description: Wireless-AC USB Adapter Model: WUSB6300 V2 Sincerely, Po-Wen Cheng / Manager, Regulatory Compliance Belkin International, Inc. Tel: +1 949 238-4518 E-mail: [email protected]

Belkin International, Inc. 12045 East Waterfront Dr. Playa Vista, California 90094, United States Date: 2020-11 -03 FCC ID: K7S-03609 To the attention of Federal Communications Commission Authorization and Evaluation Division Permanent Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: Schematics Block Diagram Operational Description Software Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely yours, __________________________________ Po-Wen Cheng / Manager, Regulatory Compliance Belkin International, Inc. Tel: +1 949 238-4518 E-mail: [email protected]

Belkin International, Inc. 12045 East Waterfront Dr. Playa Vista, California 90094, United States Date: 2020-11-03 FCC ID: K7S-03609 To the attention of Federal Communications Commission Authorization and Evaluation Division Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the commission’s rules, we request short-term confidential treatment for the following information until 180 days after the Grant Date of Equipment Authorization in order to ensure sensitive business information remains confidential until the actual marketing of the device: External photos Test Setup photos User’s manual Internal Photos Sincerely yours, __________________________________ Po-Wen Cheng / Manager, Regulatory Compliance Belkin International, Inc. Tel: +1 949 238-4518 E-mail: [email protected]

Belkin International, Inc. 12045 East Waterfront Dr. Playa Vista, California 90094, United States DFS device channel plan and software operational declaration Date: 2020-11-03 We, Belkin International, Inc., declare that the device, FCC ID: K7S-03609 Model Name: WUSB6300 V2, does not have Ad Hoc on “non-US frequencies” and/or on“ DFS frequencies“. Also, the client software and associated drivers will not initiate any transmission on DFS frequencies without initiation by a master. This includes restriction on transmissions for beacons and support for ad-hoc peer-to-peer modes. Below is the channel / frequency plan for the device: Also, on DFS channels, the WLAN driver in the device operates under the control of an AP at all times, except when in ad-hoc mode on US non-DFS channels. The device passively scans DFS frequencies until a master device is detected. The control of this functionality is not accessible to anyone under any conditions. Furthermore, the firmware is protected by a special signature and CH 1 2 3 4 5 6 7 8 9 10 11 Frequency (MHz) 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 Scan Type Passive Passive Passive Passive Passive Passive Passive Passive Passive Passive Passive CH 36 38 40 42 44 46 48 Frequency (MHz) 5180 5190 5200 5210 5220 5230 5240 Scan Type Passive Passive Passive Passive Passive Passive Passive CH 52 54 56 58 60 62 64 Frequency (MHz) 5260 5270 5280 5290 5300 5310 5320 Scan Type Passive Passive Passive Passive Passive Passive Passive CH 100 102 104 106 108 110 112 116 118 120 122 Frequency (MHz) 5500 5510 5520 5530 5540 5550 5560 5580 5590 5600 5610 Scan Type Passive Passive Passive Passive Passive Passive Passive Passive Passive Passive Passive CH 124 126 128 132 134 136 140 Frequency (MHz) 5620 5630 5640 5660 5670 5680 5700 Scan Type Passive Passive Passive Passive Passive Passive Passive CH 149 151 153 155 157 159 161 165 Frequency (MHz) 5745 5755 5765 5775 5785 5795 5805 5825 Scan Type Passive Passive Passive Passive Passive Passive Passive Passive Belkin International, Inc. 12045 East Waterfront Dr. Playa Vista, California 90094, United States CRC checksum. Signature and CRC checksum will be calculated and verified before firmware upgrade. Unauthorized modification to firmware will lead to the failure of verification and thus firmware upgrade will not be allowed. Sincerely yours, ----------------------------------- Po-Wen Cheng / Manager, Regulatory Compliance Belkin International, Inc. Tel: +1 949 238-4518 E-mail: [email protected]

Belkin International, Inc. 12045 East Waterfront Dr. Playa Vista California United States 90094 Date: 2020-07-02 A U T H O R I Z A T I O N L E T T E R To whom it may concern: I, the undersigned Jay Tu of Belkin International, Inc. hereby authorize Po-Wen Cheng of Belkin International, Inc. to act on my behalf in all matters relating to all processes required in FCC/ISED and any communication needed with the national authority. Any and all acts carried out by Po-Wen Cheng on my behalf shall have the same effects as acts of our own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Thank you! Sincerely yours, --------- Jay Tu / Manager, Regulatory Compliance Belkin International, Inc. Tel: +1 310 633 9309*9142 E-mail: [email protected]

Belkin International, Inc. 12045 East Waterfront Dr. Playa Vista, California 90094, United States POWER OF ATTORNEY Date: November 3, 2020 FCC ID: K7S-03609 To whom it may concern: We, Belkin International, Inc. the undersigned, hereby authorize Debby Lin of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan) of Taiwan to act on our behalf, as our agent, in the following matters related to the FCC approval of our products: report submittal, related correspondence, the signing of all documents relating to these matters, and any other lawful activity necessary to obtain such certification. Any act carried out by Debby Lin of BV CPS Taoyuan within the scope of this authorization shall have the same effects as our own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Thank you. Sincerely yours, __________________________________ Po-Wen Cheng / Manager, Regulatory Compliance Belkin International, Inc. Tel: +1 949 238-4518 E-mail: [email protected]

Reference No.: BEMT-WTW-P20090204-2 Page 1/3 CONSTRUCTION PHOTOS OF EUT Reference No.: BEMT-WTW-P20090204-2 Page 2/3 Reference No.: BEMT-WTW-P20090204-2 Page 3/3

2020-7-16 Part Number : 42V-120-1568R Part Name : VN LABEL BACK (R3HF) WUBT-236AC73 WUSB6300V2-US/CA_8840-03161 RONGXIN : 42V-120-1528R : 52.1*14.7*R3.5mm +/-0.2mm : Pantone COOL GRAY 3C+Middle Gray() 52.1mm 14.7mm R3.5mm

Reference No.: BEMT-WTW-P20090204-3 Page 1/7 CONSTRUCTION PHOTOS OF EUT Reference No.: BEMT-WTW-P20090204-3 Page 2/7 Reference No.: BEMT-WTW-P20090204-3 Page 3/7 Reference No.: BEMT-WTW-P20090204-3 Page 4/7 Reference No.: BEMT-WTW-P20090204-3 Page 5/7 Antenna 1 Reference No.: BEMT-WTW-P20090204-3 Page 6/7 Antenna 2 Reference No.: BEMT-WTW-P20090204-3 Page 7/7

SAR Test Report Report Format Version 5.0.0 Page No. : 1 of 28 Report No. : SFBEMT-WTW-P20090204 Issued Date : Oct. 21, 2020 SAR Test Report Report No. : SFBEMT-WTW-P20090204 Applicant : Belkin International, Inc. Address : 12045 East Waterfront Drive Playa Vista, CA. 90094, USA Product : Wireless-AC USB Adapter FCC ID : K7S-03609 Brand : Linksys Model No. : WUSB6300 V2 Standards : FCC 47 CFR Part 2 (2.1093), IEEE C95.1:1992, IEEE Std 1528:2013 KDB 865664 D01 v01r04, KDB 865664 D02 v01r02 KDB 248227 D01 v02r02, KDB 447498 D01 v06, KDB 447498 D02 v02r01 Sample Received Date : Sep. 09, 2020 Date of Testing : Sep. 21, 2020 ~ Oct. 09, 2020 Lab Address : No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location : No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City, Taiwan CERTIFICATION: The above equipment have been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch–Lin Kou Laboratories, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s SAR characteristics under the conditions specified in this report. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by TAF or any government agencies. Prepared By : Gina Liu / Specialist Approved By : Gordon Lin / Manager FCC Accredited No.: TW0003 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. SAR Test Report Report Format Version 5.0.0 Page No. : 2 of 28 Report No. : SFBEMT-WTW-P20090204 Issued Date : Oct. 21, 2020 Table of Contents Release Control Record ............................................................................................................................................................... 3 1. Summary of Maximum SAR Value ....................................................................................................................................... 4 2. Description of Equipment Under Test ................................................................................................................................. 5 3. SAR Measurement System ................................................................................................................................................... 6 3.1 Definition of Specific Absorption Rate (SAR) ............................................................................................................... 6 3.2 SPEAG DASY6 System ............................................................................................................................................... 6 3.2.1 Robot ............................................................................................................................................................... 7 3.2.2 Probes ............................................................................................................................................................. 8 3.2.3 Data Acquisition Electronics (DAE) .................................................................................................................. 8 3.2.4 Phantoms ......................................................................................................................................................... 8 3.2.5 Device Holder .................................................................................................................................................. 9 3.2.6 System Validation Dipoles ............................................................................................................................. 10 3.2.7 Power Source ................................................................................................................................................ 10 3.2.8 Tissue Simulating Liquids .............................................................................................................................. 11 3.3 SAR System Verification ............................................................................................................................................ 13 3.4 SAR Measurement Procedure ..............…

Text truncated - open the document above for the full version.