K7S-08270LINKSYS RE7350 WIFI 6 RANGE EXTENDER, AX1800 / LINKSYS RE7310 WIFI RANGE EXTENDER, AX1800

1 User Guide AX1800 MAX-STREAM ® WiFi Range Extender Model RE7310 2 Contents Product Overview ................................................................................................... 3 Front view ................................................................................................................................................... 3 Side view ..................................................................................................................................................... 4 How to Install the Range Extender ................................................................... 5 Setting up as a wireless range extender ......................................................................................... 5 Accessing Your Range Extender Settings ................................................. 11 Using Range Extender Settings ..................................................................... 13 WPS ........................................................................................................................................................... 14 Site Survey ............................................................................................................................................. 16 QoS (Quality of Service) ..................................................................................................................... 17 Cross-Band ............................................................................................................................................. 17 Access Control ...................................................................................................................................... 17 Troubleshooting ................................................................................................... 18 You cannot get your range extender connected ....................................................................... 18 You cannot access your range extender ...................................................................................... 18 You have intermittent connection problems .............................................................................. 20 Specifications ....................................................................................................... 21 RE7310 ................................................................................................................................................... 21 Environmental ........................................................................................................................................ 21 3 Product Overview Front view The light on the front of the range extender gives you information about power, updating and signal strength. Light color Status/ description Solid Blue • Power on, ready for device connection Blinking Blue (normal state) • Starting up. • Upgrading firmware. Blinking Orange (normal state) • Not connected to the router or other error. Blinking Blue (WPS pairing) • WPS pairing in process Blinking Orange (WPS pairing) • Overlapping WPS pairing sessions Solid Orange for 2 minutes (WPS pairing) • WPS pairing unsuccessful 4 Side view WPS™ Button—Use Wi-Fi Protected Setup to automatically and securely add compatible wireless devices to your network with Push Button Connect. Refer to Using WPS on page 5 . Reset Button—Press and hold until the power light on the front of the range extender blinks to reset to factory defaults. You can also restore the defaults from the Administration > Factory Defaults screen in the extender’s settings interface (page 13 ). 5 How to Install the Range Extender There are two ways to use your Linksys range extender: as a wireless range extender or as a wired range extender (access point). Wireless range extenders repeat existing Wi-Fi signals. Wired range extenders (access points) create new Wi-Fi hotspots when connected to a router or access point with an ethernet cable. Both scenarios require a router with a working internet connection. Before starting setup, decide whether you want to use your RE7310 as a wireless range extender or as a wired range extender (access point). Instructions for both setups are in this user guide. Setting up as a wireless range extender Wi-Fi Protected Setup (WPS) Does your router have a WPS button? WPS is a simple way to connect Wi-Fi devices with Push Button Connect. Routers that support WPS have a button that might look like one of these symbols: If your router has a WPS button, continue with WPS below. If not, or if you are not sure, continue with browser-based setup on page 9 . Note—The WPS button will not work if you have disabled WPS on your router, or if you have chosen WEP as your network security type. In either case, continue with browser-based setup on page 9 . 1. Plug the range extender into an electrical outlet close to your router. You can move the range extender to an ideal location later in step 5. After the range extender is plugged in, the light on the front will blink blue for up to a minute. 6 2. Wait for the light on the front of your range extender to blink orange before going to step 3. This can take up to a minute. 3. Extend your network. a. Press the WPS button on your router. Within the next two minutes complete step 3b. b. Press the WPS button on the side of your range extender. The light on the front of your range extender will blink blue. Watch the light to verify whether the connection was successful. If it turns solid blue , the connection was successful. Move to step 4. If it blinks orange , the connection failed. You can try again by repeating step 3 or try browser-based setup on page 9 . 7 4. Extend a second network. You may skip this step if you have a single-band router or if you don't want to extend a second network. a. Press the WPS button on your router again. Within the next two minutes complete step 4b. b. Press the WPS button on your range extender again. The light o…

Text truncated - open the document above for the full version.

1 User Guide AX1800 MAX-STREAM ® WiFi 6 Range Extender Model RE7350 2 Contents Product Overview ................................................................................................... 3 Front view ................................................................................................................................................... 3 Side view ..................................................................................................................................................... 4 Bottom view ............................................................................................................................................... 5 How to Install the Range Extender ................................................................... 6 Setting up as a wireless range extender ......................................................................................... 6 Setting up as wired range extender (access point) .................................................................. 12 Accessing Your Range Extender Settings ................................................. 14 Using Range Extender Settings ..................................................................... 16 WPS ........................................................................................................................................................... 17 Site Survey ............................................................................................................................................. 19 QoS (Quality of Service) ..................................................................................................................... 20 Cross-Band ............................................................................................................................................. 20 Access Control ...................................................................................................................................... 20 Troubleshooting ................................................................................................... 21 You cannot get your range extender connected ....................................................................... 21 You cannot access your range extender ...................................................................................... 21 You have intermittent connection problems .............................................................................. 23 Specifications ....................................................................................................... 24 RE7350 ................................................................................................................................................... 24 Environmental ........................................................................................................................................ 24 3 Product Overview Front view The light on the front of the range extender gives you information about power, updating and signal strength. Light color Status/ description Solid Blue • Power on, ready for device connection Blinking Blue (normal state) • Starting up. • Upgrading firmware. Blinking Orange (normal state) • Not connected to the router or other error. Blinking Blue (WPS pairing) • WPS pairing in process Blinking Orange (WPS pairing) • Overlapping WPS pairing sessions Solid Orange for 2 minutes (WPS pairing) • WPS pairing unsuccessful 4 Side view WPS™ Button—Use Wi-Fi Protected Setup to automatically and securely add compatible wireless devices to your network with Push Button Connect. Refer to Using WPS on page 6 . Reset Button—Press and hold until the power light on the front of the range extender blinks to reset to factory defaults. You can also restore the defaults from the Administration > Factory Defaults screen in the extender’s settings interface (page 16 ). 5 Bottom view Ethernet Port—Connect wired devices to your wireless network with an ethernet (network) cable. A green light turns on when an ethernet device is connected and active on this port. An orange light blinks when the extender is sending or receiving data over the port. 6 How to Install the Range Extender There are two ways to use your Linksys range extender: as a wireless range extender or as a wired range extender (access point). Wireless range extenders repeat existing Wi-Fi signals. Wired range extenders (access points) create new Wi-Fi hotspots when connected to a router or access point with an ethernet cable. Both scenarios require a router with a working internet connection. Before starting setup, decide whether you want to use your RE7350 as a wireless range extender or as a wired range extender (access point). Instructions for both setups are in this user guide. Setting up as a wireless range extender Wi-Fi Protected Setup (WPS) Does your router have a WPS button? WPS is a simple way to connect Wi-Fi devices with Push Button Connect. Routers that support WPS have a button that might look like one of these symbols: If your router has a WPS button, continue with WPS below. If not, or if you are not sure, continue with browser-based setup on page 10 . Note—The WPS button will not work if you have disabled WPS on your router, or if you have chosen WEP as your network security type. In either case, continue with browser-based setup on page 10 . 1. Plug the range extender into an electrical outlet close to your router. You can move the range extender to an ideal location later in step 5. After the range extender is plugged in, the light on the front will blink blue for up to a minute. 7 2. Wait for the light on the front of your range extender to blink orange before going to step 3. This can take up to a minute. 3. Extend your network. a. Press the WPS button on your router. Within the next two minutes complete step 3b. b. Press the WPS button on the side of your range extender. The light on the front of your range extender will bl…

Text truncated - open the document above for the full version.

.3" AX1800 WIFI RANGE EXTENDER Regulatory and Warranty Information .3" Model RE7350 / RE7310 .3" .3" 1 WIRELESS REGULATORY INFORMATION FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This product has been tested and complies with the specifications for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used according to the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which is found by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna • Increase the separation between the equipment and devices • Connect the equipment to an outlet other than the receiver’s • Consult a dealer or an experienced radio/TV technician for assistance FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. IEEE 802.11b/g/n/ax operation of this product in the USA is firmware-limited to channels 1 through 11. The device for the band 5150-5250 MHz is only for indoor usage to reduce the potential for harmful interference to co-channel mobile satellite systems. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 35 cm between the radiator and your body. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. Innovation, Science and Economic Development Canada Statement CAN ICES-003(B) / NMB-003(B) This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. 2 For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. The device could automatically discontinue transmission in case of absence of information to transmit, or operational failure. Note that this is not intended to prohibit transmission of control or signaling information or the use of repetitive codes where required by the technology. Innovation, Science and Economic Development Canada Radiation Exposure Statement Industry Canada Radiation Exposure Statement This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 35 cm between the radiator and your body. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with ISED multi-transmitter product procedures. Restrictions in the 5 GHz Band The device for the band 5150-5250 MHz is only for indoor usage to reduce potential for harmful interference to co-channel mobile satellite systems. This device has been designed to operate with an antenna having a maximum gain of 4.9 dBi and 5.5 dBi at 2.4 GHz and 5 GHz respectively. Antenna having a higher gain is strictly prohibited per regulations of ISED. The required antenna impedance is 50 ohms. The maximum antenna gain (Please see the table below) permitted (for devices in the bands 5250-5350 MHz and 5470-5725 MHz) to comply with the EIRP limit and because high power radars are allocated as primary users (meaning they have priority) in 5250-5350 MHz and 5650-5850 MHz, these radars could cause interference and/or damage to license exempt LAN devices. No. Antenna Type 2.4 GHz Gain (peak) dBi 5 GHz Gain (peak) dBi Antenna Connector 1 PCB 4.9 5.3 i-pex (MHF) 2 PCB 4.9 5.5 i-pex (MHF) Additional requirements for the band 5600-5650 MHz Until further notice, devices subject to this section shall not be capable of transmitting in the band 5600-5650 MHz, so that Environment Canada weather radars operating in this band are protected. 3 Avis d’Innovation, Sciences et Développement économique Canada CAN ICES-003(B) / NMB-003(B). L’exploitation est autorisé e seulement aux conditions suivantes: (1) l’appareil ne doit pas produire de brouillage, et (2) il doit accepter tout brouillage radioé lectrique reç u, mê me si ce brouillage est susceptible de compromettre le fonctionnem ent du dispositif. Pour les produits disponibles sur le marché aux É tats-Unis et au Canada, seuls les canaux de 1 à 11 peuvent ê tre utilisé s. La sé lection d’autres canaux n’est pas possible. Le dispositif peut automatiquement cesser d’émettre en cas d’absence d’informations à transmettre, ou à cause d’une dé faillance technique. Notez que l’objet n’est pas d’interdire la transmission des informations de contrô le ou de signalisation ou l’utilisation de codes ré pé titifs lorsque requis par la technologie. Avis d’Innovation, Sciences et Développement économique Canada concernant l’exposition aux radiofréquences Ce maté riel est conforme aux limites é tablies par ISED en matiè re d’exposition aux radiofré quences dans un environnement non contrô lé . Ce maté riel doit ê tre installé et utilisé à une distance d’au moins 35 cm entre l’antenn…

Text truncated - open the document above for the full version.

Belkin International, Inc. 12045 East Waterfront Dr. Playa Vista, California 90094, United States Date: 2020-12 -09 FCC ID: K7S-08270 To the attention of Federal Communications Commission Authorization and Evaluation Division Permanent Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: Schematics Block Diagram Operational Description Software Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely yours, ___________________________________________________ Po-Wen Cheng / Manager, Regulatory Compliance Belkin International, Inc. Tel: +1 949 238-4518 E-mail: [email protected]

Belkin International, Inc. 12045 East Waterfront Dr. Playa Vista, California 90094, United States Date: 2020-12-09 FCC ID: K7S-08270 To the attention of Federal Communications Commission Authorization and Evaluation Division Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the commission’s rules, we request short-term confidential treatment for the following information until 180 days after the Grant Date of Equipment Authorization in order to ensure sensitive business information remains confidential until the actual marketing of the device: External photos Test Setup photos User’s manual Internal Photos Sincerely yours, ___________________________________________ Po-Wen Cheng / Manager, Regulatory Compliance Belkin International, Inc. Tel: +1 949 238-4518 E-mail: [email protected]

Belkin International, Inc. 12045 East Waterfront Dr. Playa Vista, California 90094, United States POWER OF ATTORNEY Date: Dezember 9, 2020 FCC ID: K7S-08270 To whom it may concern: We, Belkin International, Inc. the undersigned, hereby authorize Debby Lin of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan) of Taiwan to act on our behalf, as our agent, in the following matters related to the FCC approval of our products: report submittal, related correspondence, the signing of all documents relating to these matters, and any other lawful activity necessary to obtain such certification. Any act carried out by Debby Lin of BV CPS Taoyuan within the scope of this authorization shall have the same effects as our own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Thank you. Sincerely yours, _________________________________________ Po -Wen Cheng / Manager, Regulatory Compliance Belkin International, Inc. Tel: +1 949 238-4518 E-mail: [email protected]

Belkin International, Inc. 12045 East Waterfront Dr. Playa Vista California United States 90094 Date: 2020-07-02 A U T H O R I Z A T I O N L E T T E R To whom it may concern: I, the undersigned Jay Tu of Belkin International, Inc. hereby authorize Po-Wen Cheng of Belkin International, Inc. to act on my behalf in all matters relating to all processes required in FCC/ISED and any communication needed with the national authority. Any and all acts carried out by Po-Wen Cheng on my behalf shall have the same effects as acts of our own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Thank you! Sincerely yours, --------- Jay Tu / Manager, Regulatory Compliance Belkin International, Inc. Tel: +1 310 633 9309*9142 E-mail: [email protected]

Reference No.: BEMT-WTW-P20100622-1 Page 1/7 CONSTRUCTION PHOTOS OF EUT Model No.: RE7350 201210 P1廠牌不對的事客戶要用P17的照片假裝 Reference No.: BEMT-WTW-P20100622-1 Page 2/7 Reference No.: BEMT-WTW-P20100622-1 Page 3/7 201210 P3廠牌不對的事客戶要用P19的照片假裝 201208_PM說把另一張看得出來的有加尺規的照片移除 Reference No.: BEMT-WTW-P20100622-1 Page 4/7 Model No.: RE7310 Reference No.: BEMT-WTW-P20100622-1 Page 5/7 Reference No.: BEMT-WTW-P20100622-1 Page 6/7 Reference No.: BEMT-WTW-P20100622-1 Page 7/7

XXXX-XXXX XXXXXXXXXXXXXX XXXXXXXXXXXX SCALE 1:1 DATE: 2020.12.10 REVISION: B01 Revision Notes: A00 INITIAL RELEASE A01 REVISED AC SYMBOL B00 ADDED FACTORY ID CODE: vn001 B01 CAN ICES-3(B) / NMB-3(B) replaced by CAN ICES-003(B) / NMB-003(B) DESIGNER: mw ALL DIMENSIONS IN MM. 8840-03301 Linksys RE7310 Range Extender PRODUCT ID LABEL DO NOT MAKE CHANGES WITHOUT PERMISSION FROM BELKIN IDG. ELEMENTS IN WHITE PRINTED IN LINKSYS PURE WHITE, MATTE FINISH ELEMENTS IN ORANGE: PRINTED IN PANTONE COOL GRAY 8 C, MATTE FINISH ARTWORK TO PRINT ON LAYER ‘ARTWORK’ ELEMENTS IN ORANGE PRINTED IN PMS COOL GRAY 8 C, MATTE FINISH ELEMENTS IN BLUE: PRINTED IN LINKSYS PURE WHITE, MATTE FINISH COLOR MUST MATCH ENCLOSURE GRAPHICS IN BLACK PRINTED ON PRODUCTION LINE FOR EACH PRODUCT

XXXX-XXXX XXXXXXXXXXXXXX XXXXXXXXXXXX SCALE 1:1 DATE: 2020.12.07 REVISION: B00 Revision Notes: A00 INITIAL RELEASE A01 REVISED AC SYMBOL B00 ADDED FACTORY ID CODE: vn001 B01 REVISED CAN ICES-3(B) / NMB-3(B) TO CAN ICES-003(B) / NMB-003(B) DESIGNER: mw ALL DIMENSIONS IN MM. 8840-03300 Linksys RE7350 Range Extender PRODUCT ID LABEL DO NOT MAKE CHANGES WITHOUT PERMISSION FROM BELKIN IDG. ELEMENTS IN WHITE PRINTED IN LINKSYS PURE WHITE, MATTE FINISH ELEMENTS IN ORANGE: PRINTED IN PANTONE COOL GRAY 8 C, MATTE FINISH ARTWORK TO PRINT ON LAYER ‘ARTWORK’ ELEMENTS IN ORANGE PRINTED IN PMS COOL GRAY 8 C, MATTE FINISH GRAPHICS IN BLACK PRINTED ON PRODUCTION LINE FOR EACH PRODUCT ELEMENTS IN BLUE: PRINTED IN LINKSYS PURE WHITE, MATTE FINISH COLOR MUST MATCH ENCLOSURE

Reference No.: BEMT-WTW-P20100622-2 Page 1/26 CONSTRUCTION PHOTOS OF EUT Model No.: RE7350 Reference No.: BEMT-WTW-P20100622-2 Page 2/26 Reference No.: BEMT-WTW-P20100622-2 Page 3/26 Reference No.: BEMT-WTW-P20100622-2 Page 4/26 Reference No.: BEMT-WTW-P20100622-2 Page 5/26 Reference No.: BEMT-WTW-P20100622-2 Page 6/26 Reference No.: BEMT-WTW-P20100622-2 Page 7/26 Reference No.: BEMT-WTW-P20100622-2 Page 8/26 Reference No.: BEMT-WTW-P20100622-2 Page 9/26 Reference No.: BEMT-WTW-P20100622-2 Page 10/26 Antenna No.: 1 Reference No.: BEMT-WTW-P20100622-2 Page 11/26 Reference No.: BEMT-WTW-P20100622-2 Page 12/26 Antenna No.: 2 Reference No.: BEMT-WTW-P20100622-2 Page 13/26 Reference No.: BEMT-WTW-P20100622-2 Page 14/26 Model No.: RE7310 Reference No.: BEMT-WTW-P20100622-2 Page 15/26 Reference No.: BEMT-WTW-P20100622-2 Page 16/26 Reference No.: BEMT-WTW-P20100622-2 Page 17/26 Reference No.: BEMT-WTW-P20100622-2 Page 18/26 Reference No.: BEMT-WTW-P20100622-2 Page 19/26 Reference No.: BEMT-WTW-P20100622-2 Page 20/26 Reference No.: BEMT-WTW-P20100622-2 Page 21/26 Reference No.: BEMT-WTW-P20100622-2 Page 22/26 Reference No.: BEMT-WTW-P20100622-2 Page 23/26 Reference No.: BEMT-WTW-P20100622-2 Page 24/26 Antenna No.: 1 Reference No.: BEMT-WTW-P20100622-2 Page 25/26 Antenna No.: 2 Reference No.: BEMT-WTW-P20100622-2 Page 26/26

Report No.: SABEMT-WTW-P20100622 Page No. 1 / 7 Report Format Version: 6.1.1 RF Exposure Report Report No.: SABEMT-WTW-P20100622 FCC ID: K7S-08270 Test Model: RE7350 Series Model: RE7310 Received Date: Oct. 26, 2020 Test Date: Nov. 11, 2020 Issued Date: Dec. 15, 2020 Applicant: Belkin International, Inc. Address: 12045 East Waterfront Drive Playa Vista, CA 90094 United States Of America Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory Lab Address: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan Test Location: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan FCC Registration / Designation Number: 723255 / TW2022 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. Report No.: SABEMT-WTW-P20100622 Page No. 2 / 7 Report Format Version: 6.1.1 Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 RF Exposure .......................................................................................................................................... 5 2.1 Limits For Maximum Permissible Exposure (MPE) ............................................................................. 5 2.2 MPE Calculation Formula ................................................................................................................... 5 2.3 Classification ....................................................................................................................................... 5 2.4 Antenna Gain ...................................................................................................................................... 6 2.5 Calculation Result ............................................................................................................................... 7 Report No.: SABEMT-WTW-P20100622 Page No. 3 / 7 Report Format Version: 6.1.1 Release Control Record Issue No. Description Date Issued SABEMT-WTW-P20100622 Original release. Dec. 15, 2020 Report No.: SABEMT-WTW-P20100622 Page No. 4 / 7 Report Format Version: 6.1.1 1 Certificate of Conformity Product: LINKSYS RE7350 WIFI 6 RANGE EXTENDER, AX1800 LINKSYS RE7310 WIFI RANGE EXTENDER, AX1800 Brand: Linksys Test Model: RE7350 Series Model: RE7310 Sample Status: Engineering sample Applicant: Belkin International, Inc. Test Date: Nov. 11, 2020 Standards: FCC Part 2 (Section 2.1091) IEEE C95.3 -2002 References Test Guidance KDB 447498 D01 General RF Exposure Guidance v06 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. Prepared by : , Date: Dec. 15, 2020 Joyce Kuo / Specialist Approved by : , Date: Dec. 15, 2020 Clark Lin / Technical Manager Report No.: SABEMT-WTW-P20100622 Page No. 5 / 7 Report Format Version: 6.1.1 2 RF Exposure 2.1 Limits For Maximum Permissible Exposure (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Average Time (minutes) Limits For General Population / Uncontrolled Exposure 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f 2 )* 30 30-30…

Text truncated - open the document above for the full version.