K7SAVC024TXBelkin ConnectAir Transmitter

Date: 2025-10-17 FCC ID: K7SAVC024TX To the attention of Federal Communications Commission Authorization and Evaluation Division Attestation Statements Attestation Statements Part 2.911(d)(5)(i) Filing Belkin International, Inc. certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Attestation Statements Part 2.911(d)(5)(ii) Filing Belkin International, Inc. certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely yours, ----------------------------------- Daisy Dai, Regulatory Compliance Engineer Belkin International, Inc. Tel: +86 138 2723 3544 E-mail: [email protected]

U.S. Agent for Service of Process Attestation To the attention of Federal Communications Commission Authorization and Evaluation Division Applicant / Designated U.S Agent Company Name: Belkin International, Inc. FRN: 0008128605 Grantee code: K7S Contact Name: Jay Tu Address: 555 S Aviation Blvd. Suite 180 El Segundo, CA 90245 USA Telephone No: +1 310 633 9309 # 9142 Email: [email protected] This letter is to confirm that the Applicant has designated itself as the U.S Agent for service of process as required by §2.911(d)(7). The Applicant further acknowledges acceptance to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Applicant / U.S. Agent Signature: Date: 2023-12-28 Signed by (printed name): Zack Vogel

Date: 2025-10-17 FCC ID: K7SAVC024TX To the attention of Federal Communications Commission Authorization and Evaluation Division Permanent Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: Schematics Block Diagram Operational Description Software Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely yours, ----------------------------------- Daisy Dai, Regulatory Compliance Engineer Belkin International, Inc. Tel: +86 138 2723 3544 E-mail: [email protected]

Date: 2025-10-17 FCC ID: K7SAVC024TX To the attention of Federal Communications Commission Authorization and Evaluation Division Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the commission’s rules, we request short-term confidential treatment for the following information until 180 days after the Grant Date of Equipment Authorization in order to ensure sensitive business information remains confidential until the actual marketing of the device: External photos Test Setup photos User’s manual Internal Photos Sincerely yours, ----------------------------------- Daisy Dai, Regulatory Compliance Engineer Belkin International, Inc. Tel: +86 138 2723 3544 E-mail: [email protected]

Date: 2025-10-17 FCC ID: K7SAVC024TX AUTHORIZATION LETTER To Whom It May Concern: Belkin International, Inc. hereby authorizes Andrea Hsia / Assistant Manager of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (“BV CPS Taoyuan”), to act on its behalf in all matters relating to the Federal Communication Commission (“FCC”) application for equipment authorization in connection with the FCC ID listed above, including signing of all documents relating to these matters. Any and all acts carried out by Andrea Hsia / Assistant Manager of BV CPS Taoyuan on Belkin International, Inc.’s behalf, within the scope of the powers granted herein, shall have the same effect as acts of its own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Sincerely yours, ----------------------------------- Daisy Dai, Regulatory Compliance Engineer Belkin International, Inc. Tel: +86 138 2723 3544 E-mail: [email protected]

Power of Attorney Date: June 19, 2024 To whom it may concern: I, the undersigned, Jay Tu, hereby authorize the person(s) listed below to act on behalf of me to sign all related documents for Belkin International, Inc.’s FCC/IC application. Name: Zack Vogel / Sr. Regulatory Compliance Engineer, Regulatory Compliance Tel: +1 310 751 2800 E-mail: [email protected] Name: Rossi Wu / Senior Regulatory Compliance Engineer, Regulatory Compliance Tel: +1 310 633 9309 # 2960 E-mail: [email protected] Name: Daisy Dai / Regulatory Compliance Engineer, Regulatory Compliance Tel: O +86 755 2387 1039 E-mail: [email protected] Respectfully, Applicant’s company name: Belkin International, Inc. Applicant’s company address: 555 S. Aviation Blvd., Suite 180, EI Segundo, CA 90245, USA Signature Name and Job Title: Jay Tu / Manager, Regulatory Compliance E-mail: [email protected] Tel: +1 310 633 9309 # 9142

Bottom of EUT Label sample, label location

SAR Test Report Report Format Version 8.0.0 Page No. : 1 of 24 Report No. : SFBDJM-WTW-P25070537 Issued Date : Oct. 29, 2025 SAR Test Report FCC Rule Part : CFR §2.1093 Standards : IEEE Std 1528:2013, KDB 865664 D01 v01r04, KDB 865664 D02 v01r02, KDB 248227 D01 v02r02, KDB 447498 D01 v06, KDB 447498 D02 v02r01, KDB 447498 D04 Interim General RF Exposure Guidance v01 Report No. : SFBDJM-WTW-P25070537 Applicant : Belkin International, Inc. Address : 555 S. Aviation Blvd., Suite 180, El Segundo, CA 90245, USA Product : Belkin ConnectAir Transmitter FCC ID : K7SAVC024TX Brand : belkin Model No. : AVC024TX Sample Received Date : Jul. 16, 2025 Date of Testing : Sep. 25, 2025 Lab Address : No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location : No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City, Taiwan FCC Accredited No. : TW0003 CERTIFICATION: The above equipment have been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch–Lin Kou Laboratories, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s SAR characteristics under the conditions specified in this report. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by TAF or any government agencies. Prepared By : Vera Huang / Specialist Approved By : Gordon Lin / Manager This report is governed by, and incorporates by reference, the Conditions of Testing as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our-business/cps/about-us/terms-conditions/ and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. Statements of conformity are based on simple acceptance criteria without taking measurement uncertainty into account, unless otherwise requested in writing. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. SAR Test Report Report Format Version 8.0.0 Page No. : 2 of 24 Report No. : SFBDJM-WTW-P25070537 Issued Date : Oct. 29, 2025 Table of Contents Release Control Record ............................................................................................................................................................... 3 1. Test Reference Guidance ...................................................................................................................................................... 4 2. Summary of Maximum SAR Value ....................................................................................................................................... 4 3. Description of Equipment Under Test ................................................................................................................................. 5 4. SAR Measurement System ................................................................................................................................................... 6 4.1 Definition of Specific Absorption Rate (SAR) ............................................................................................................... 6 4.2 SPEAG DASY6 System ............................................................................................................................................... 6 4.2.1 Robot ............................................................................................................................................................... 7 4.2.2 Probes ............................................................................................................................................................. 8 4.2.3 Data Acquisition Electronics (DAE) .................................................................................................................. 8 4.2.4 Phantoms ......................................................................................................................................................... 8 4.2.5 Device Holder .................................................................................................................................................. 9 4.2.6 System Validation Dipoles ............................................................................................................................. 10 4.2.7 Power Source ................................................................................................................................................ 10 4.2.8 Tissue Simulating Liquids .............................................................................................................................. 11 4.3 SAR System Verification ..........................................................…

Text truncated - open the document above for the full version.

Plots of System Verification Appendix A. Plots of System Verification The plots for system verification are shown as follows. Report No.: SFBDJM-WTW-P25070537 Plots of System Verification Measurement Report S01 System Check_H5250_250925 Device under Test Properties Model, Manufacturer Dimensions [mm] IMEI DUT Type D5GHzV2, 10.0 x 10.0 x 300.0 Exposure Conditions Phantom Section, TSL Position, Test Distance [mm] Band Group, UID Frequency [MHz], Channel Number Conversion Factor TSL Conductivity [S/m] TSL Permittivity Flat, , CW, 0-- 5250.000, 0 5.27 4.52 35.3 Hardware Setup Phantom TSL, Measured Date Probe, Calibration Date DAE, Calibration Date Twin-SAM V8.0 (30deg probe tilt) - 2122 H50T60N9 , 2025-09-25 EX3DV4 - SN7736, 2025-02-17 DAE4 Sn1589, 2025-04-17 Scan Setup Area Scan Zoom Scan Grid Extents [mm] 40.0 x 80.0 24.0 x 24.0 x 22.0 Grid Steps [mm] 10.0 x 10.0 4.0 x 4.0 x 1.4 Sensor Surface [mm] 3.0 1.4 Measurement Results Area Scan Zoom Scan Date 2025-09-25 2025-09-25 psSAR1g [W/kg] 4.12 4.22 psSAR10g [W/kg] 1.18 1.19 Power Drift [dB] 0.08 0.09 Report No.: SFBDJM-WTW-P25070537 Plots of Measurement Appendix B. Plots of Measurement The SAR plots for highest measured SAR in each exposure configuration, wireless mode and frequency band combination are shown as follows. Report No.: SFBDJM-WTW-P25070537 Plots of Measurement Measurement Report P01 WLAN5G_802.11a_Front Face_0mm_Ch36 Device under Test Properties Model, Manufacturer Dimensions [mm] IMEI DUT Type Device, 75.0 x 45.0 x 22.0 Exposure Conditions Phantom Section, TSL Position, Test Distance [mm] Band Group, UID Frequency [MHz], Channel Number Conversion Factor TSL Conductivity [S/m] TSL Permittivity Flat, Front Face, 0.00 WLAN 5GHz WLAN, 10062-CAE 5180.000, 36 5.27 4.44 35.4 Hardware Setup Phantom TSL, Measured Date Probe, Calibration Date DAE, Calibration Date Twin-SAM V8.0 (30deg probe tilt) - 2122 H50T60N9 , 2025-09-25 EX3DV4 - SN7736, 2025-02-17 DAE4 Sn1589, 2025-04-17 Scan Setup Area Scan Zoom Scan Grid Extents [mm] 80.0 x 120.0 24.0 x 24.0 x 22.0 Grid Steps [mm] 10.0 x 10.0 4.0 x 4.0 x 1.4 Sensor Surface [mm] 3.0 1.4 Measurement Results Area Scan Zoom Scan Date 2025-09-25 2025-09-25 psSAR1g [W/kg] 0.325 0.319 psSAR10g [W/kg] 0.116 0.067 Power Drift [dB] -0.09 -0.07 M2/M1 [%] 62.0 Dist 3dB Peak [mm] 6.1 Report No.: SFBDJM-WTW-P25070537 Appendix C. Tissue & System Verification The measuring results for tissue simulating liquid and system check are shown as below. Note: 1. For Section 4.3, the dielectric properties of the tissue simulating liquid have been measured within 24 hours before the SAR testing and within ±10 % of the target values. Liquid temperature during the SAR testing has kept within ±2 °C. 2. For Section 4.4, The SAR measurement system was validated according to procedures in FCC KDB 865664 D0. The validation status in tabulated summary is as below. 3. For Section 4.5, Comparing to the reference SAR value provided by SPEAG in dipole calibration certificate, the deviation of system check results is within its specification of 10 %. The result indicates the system check can meet the variation criterion and the plots please refer to Appendix A of this report. Report No.: SFBDJM-WTW-P25070537 Plot No. Frequency (MHz) LiquidTemp. (°C) Conductivity (σ) Permittivity (εr) Targeted Conductivity (σ) Targeted Permittivity (εr) Deviation Conductivity (σ) Deviation Permittivity (εr) Sensitivity Range Probe Linearity Probe Isotropy Modulation Type Duty Factor PAR Date Frequency (MHz) Targeted 1g SAR (W/kg) Measured 1g SAR (W/kg) Normalized 1g SAR (W/kg) Deviation (%) Dipole S/N Probe S/N DAE S/N Output Power (dBm) S01 5250 22.2 4.52 35.3 4.71 35.9 -4.03 -1.67 Pass Pass Pass OFDM N/A Pass Sep. 25, 2025 5250 78.30 4.22 84.20 7.54 1019 7736 1589 17 Tissue Verification Validation for CW Validation for Modulation System Check Note Report No.: SFBDJM-WTW-P25070537 Appendix D. Maximum Target Conducted Power The maximum conducted average power (Unit: dBm) including tune-up tolerance is shown as below. Report No.: SFBDJM-WTW-P25070537 Tune-up Power ModeChannel Frequency Max Tune-up Power 36518011.0 40520012.0 44522012.0 4852408.5 36518012.0 40520012.0 44522012.0 4852408.5 WLAN 5.2GHz 802.11a 802.11n HT20 Report No.: SFBDJM-WTW-P25070537 Appendix E. Measured Conducted Power Result The measuring conducted power (Unit: dBm) are shown as below. Report No.: SFBDJM-WTW-P25070537 Conducted Power (Full) ModeChannel Frequency Avg. Power 36518010.84 40520011.89 44522011.78 4852408.22 36518011.57 40520011.84 44522011.76 4852408.18 WLAN 5G 802.11a 802.11n HT20 Report No.: SFBDJM-WTW-P25070537 Note: 1. SAR testing for WLAN was performed on the maximum power mode. Appendix F. SAR Test Result SAR Results for Body Exposure Condition. Report No.: SFBDJM-WTW-P25070537 Plot No. Band Mode Test Position Separation Distance (mm) Channel Duty Cycle Crest Factor Max. Tu ne-up Power (dBm) Measured Conducted Power (dBm) Scaling Fa ctor Power Drift (dB) Measured SAR-1g (W/kg) Scaled SAR-1g (W/kg) System & Position Body SAR Test Result SAR WLAN5G 802.11a Front Face 0 40 100.00 1.00 12.00 11.89 1.03 -0.05 0.309 0.32 WLAN5G 802.11a Rear Face 0 40 100.00 1.00 12.00 11.89 1.03 -0.16 0.208 0.21 WLAN5G 802.11a Left Side 0 40 100.00 1.00 12.00 11.89 1.03 -0.07 0.083 0.09 WLAN5G 802.11a Right Side 0 40 100.00 1.00 12.00 11.89 1.03 0.14 0.115 0.12 WLAN5G 802.11a Tip Side 0 40 100.00 1.00 12.00 11.89 1.03 0.09 0.186 0.19 WLAN5G 802.11a ANT Side 0 40 100.00 1.00 12.00 11.89 1.03 -0.08 0.258 0.27 WLAN5G 802.11a ANT Side (For Upper) 0 40 100.00 1.00 12.00 11.89 1.03 0.15 0.143 0.15 WLAN5G 802.11a ANT Side (For Lower) 0 40 100.00 1.00 12.00 11.89 1.03 0.13 0.266 0.27 1 WLAN5G 802.11a Front Face 0 36 100.00 1.00 11.00 10.84 1.04 -0.07 0.319 0.33 WLAN5G 802.11a Front Face 0 44 100.00 1.00 12.00 11.78 1.05 0.08 0.283 0.30 WLAN5G 802.11a Front Face 0 48 100.00 1.00 8.50 8.22 1.07 0.06 0.266 0.28 - 1.00 - 8.22 #VALUE! - - Report No.: SFBDJM-WTW-P25070537 Appendix J. Calibration of Te…

Text truncated - open the document above for the full version.

Report No.: TEOT2405000577E4 Page No.: 1 of 9 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Name Date & Signature Distribution Prepared by: Nandi Chen Sr. Engineer August 07, 2024 Approved by: Shawn Yen Supervisor August 07, 2024 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan Antenna Test Report Report No.: TEOT2405000577E4 Applicant Name: GOOD WAY TECHNOLOGY CO., LTD. Manufacturer Name: GOOD WAY TECHNOLOGY CO., LTD. Product Name: 5G Frequency Antenna Model Number: ANT NDW6000 TX Measurements performed at SGS Taiwan Ltd. Hwaya District, Taiwan Issued Date: August 07, 2024 Report No.: TEOT2405000577E4 Page No.: 2 of 9 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Revision Version Report Number Revision Date Memo TEOT2405000577E4 00 2024/08/07 Initial creation of test report. This test report contains a reference to the previous version test report that it replaces. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan Report No.: TEOT2405000577E4 Page No.: 3 of 9 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Measurement System Information General Information Testing Condition: ⚫ Temperature: 22±3 ̊C ⚫ Humidity: <80% Measurement Facility: ⚫ Measurement Chamber: MVG 3D fully anechoic chamber and its measuring system (Stargate-24-L) ⚫ Network Analyzer: Agilent E5071C Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan Report No.: TEOT2405000577E4 Page No.: 4 of 9 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Measurements are performed in a MVG Stargate-24-L with the StarAct interface for a base station simulator. The Stargate-24-L has 23 probe antennas mounted with equal spacing on a circular arch. Electronic switching of the probe antennas provides outstanding measurement speed. The geometry of the setup, with only a Styrofoam column within 1.6 meters of the EUT, ensures minimum interference and low ripple on the measured radiation patterns. The DUT is placed on top of the pedestal, in the center of the system. Typical Setup for MVG Stargate-24-L: In…

Text truncated - open the document above for the full version.

Report No.: RFBDJM-WTW-P25070537 Page No. 1 / 41 Report Format Version: 7.1.2 TEST REPORT CERTIFICATE OF CONFORMITY Standard: 47 CFR FCC Part 15, Subpart E (Section 15.407) Report No.: RFBDJM-WTW-P25070537 FCC ID: K7SAVC024TX Product: Belkin ConnectAir Transmitter Brand: belkin Model No.: AVC024TX Received Date: 2025/7/16 Test Date: 2025/8/25 ~ 2025/8/31 Issued Date: 2025/10/28 Applicant: Belkin International, Inc. Address: 555 S. Aviation Blvd., Suite 180, El Segundo, CA 90245, USA Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location: No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, Taiwan FCC Registration / Designation Number: 788550 / TW0003 Approved by: , Date: 2025/10/28 Jeremy Lin / Project Engineer This test report consists of 41 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The test results in the report only apply to the tested sample. The test results in this report are traceable to the national or international standards. Prepared by : Gina Liu / Specialist This report is governed by, and incorporates by reference, the Conditions of Testing as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our- business/cps/about-us/terms-conditions/ and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. Statements of conformity are based on simple acceptance criteria without taking measurement uncertainty into account, unless otherwise requested in writing. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Report No.: RFBDJM-WTW-P25070537 Page No. 2 / 41 Report Format Version: 7.1.2 Table of Contents Release Control Record ....................................................................................................................................................... 4 1Certificate .................................................................................................................................................................... 5 2Summary of Test Results .......................................................................................................................................... 6 2.1Measurement Uncertainty ........................................................................................................................................ 6 2.2Supplementary Information ...................................................................................................................................... 6 3General Information ................................................................................................................................................... 7 3.1General Description of EUT ..................................................................................................................................... 7 3.2Antenna Description of EUT ..................................................................................................................................... 7 3.3Channel List .............................................................................................................................................................. 7 3.4Test Mode Applicability and Tested Channel Detail .................................................................................................. 8 3.5Duty Cycle of Test Signal .......................................................................................................................................... 9 3.6Test Program Used and Operation Descriptions .................................................................................................... 10 3.7Connection Diagram of EUT and Peripheral Devices ............................................................................................ 10 3.8Configuration of Peripheral Devices and Cable Connections ................................................................................ 10 4Test Instruments ...................................................................................................................................................... 11 4.1RF Output Power .................................................................................................................................................... 11 4.2Power Spectral Density .......................................................................................................................................... 11 4.3Occupied Bandwidth ............................................................................................................................................... 11 4.4AC Pow…

Text truncated - open the document above for the full version.