K7SBPD001BOOST CHARGE Magnetic Portable Wireless Charger

Information FCC Statement DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY We, Belkin International, Inc., of 12045 E. Waterfront Drive, Playa Vista, CA 90094, Tel: +1 (310) 751 5100, declare under our sole responsibility that the products , which this declaration relates, comply with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Federal Communications Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: • Reorient or relocate the receiving antenna. • Increase the distance between the equipment and the receiver. • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. To maintain compliance with FCC RF exposure compliance requirements, please follow operation instructions as documented in this manual. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. IMPORTANT NOTE: Industry Canada Statement This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. Innovation, Science and Economic Development Canada Statement: This digital apparatus complies with CAN ICES-3(B)/NMB-3 (B). This device contains license-exempt transmitter(s)/receivers(s) that comply with Innovation, Science and Economic Development Canada’s license exempt RSS(s). Operation is subject to the following two conditions: 1. This device may not cause interference 2. This device must accept any interference, including interference that may cause undesired operation of the device. INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS WARNING: When using this product, basic precautions should always be followed, including the following: Please read the operating instructions including charging instructions and information on the minimum and maximum operating temperatures supplied with this power bank. To reduce the risk of injury, close supervision is necessary when the product is used near or by children. For indoor and dry location use only. Do not expose power bank to rain or snow. Keep the power bank away from heat sources, direct sunlight, combustible gas, humidity, water, or other liquids. Use of a power bank in a manner not recommended in these instructions may result in a risk of fire or injury to persons. The power bank will generate heat when charging. Always charge in a well-ventilated area. Do not charge under pillows, blankets, inside purse or on flammable surfaces. Do not use the power bank if visible defects are observed or if it has been wet or damaged or modified to prevent against electric shock, explosion, and/or injury. Contact the dealer or authorized agent or Belkin for assistance. Do not disassemble, open, microwave, incinerate, paint, insert foreign objects into the power bank. Do not use the power bank in excess of its output rating. Overload outputs above rating may result in a risk of fire or injury to persons. Do not expose the power bank to fire or excessive temperature. Exposure to fire or temperature above 100°C may cause explosion. Do not subject the power bank to mechanical shock such as crushing, bending, puncturing, or shredding. Avoid dropping or placing heavy objects on the power bank. Do not short-circuit the power bank or store it in a receptacle where it may be short-circuited by other metallic or conductive objects. Operating Conditions: 0° C to 40° C Simplified EU Declaration of Conformity We, Belkin International, Inc., declare under our sole responsibility that the products to which this declaration relates, are in conformity with EMC Directive 2014/30/EU, Low Voltage Directive 2014/35/EU, and (EU) 2015/863 RoHS Directive 2011/65/EU (Recast). The full text of the EU declaration of conformity is available at the following Internet address: www.belkin.com/doc Belkin Ltd., Unit 1, Regent Park, Booth Drive, Wellingborough, Northants NN8 6GR, UK Belkin B.V., Herikerbergweg 106, Plaza Arena – Jupiter, 1101 CM, Amsterdam, NL DISPOSAL INFORMATION …

Text truncated - open the document above for the full version.

Power of Attorney Date: February 3, 2021 To whom it may concern: I, the undersigned, Jay Tu, hereby authorize the person listed below to act in behalf of me to sign all related documents for Belkin International, Inc.’s FCC application. Name: Zack Vogel / Staff Regulatory Compliance Engineer, Regulatory Compliance Tel: +1 310-751-2866 E-mail: [email protected] Name: Andrei Moldavanov / Regulatory Compliance Engineer, Regulatory Compliance E-mail: [email protected] Name: Rossi Wu / Senior Regulatory Compliance Engineer, Regulatory Compliance Tel: +1 310 633 9309 # 2960 E-mail: [email protected] Respectfully, Applicant’s company name: Belkin International, Inc. Applicant’s company address: 12045 East Waterfront Dr., Playa Vista, CA 90094, United Sates Signature __ ___ Name and Job Title: Jay Tu / Manager, Regulatory Compliance E-mail: [email protected] Tel: +1 310 633 9309 # 9142

RF_160, Issue 04 Belkin International, Inc. Declaration of Authorization We Name: Belkin International, Inc. Address: 12045 East Waterfront Drive, Playa Vista, CA 90094, USA City: Playa Vista Country: USA . Declare that: Name Representative of agent: Jenny Guo Agent Company name: Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch Address: No. 96, Guantai Road (Houjie Section) Houjie Town Dongguan City, Guangdong 523942, China .. City: Dongguan .. Country: China . is authorized to apply for Certification of the following product(s): Product description: BOOST CHARGE Magnetic Portable Wireless Charger Type designation: BPD001. Trademark: belkin . Validity/ expiry date: 2022-02-08 on our behalf. Date: 2021-02-08 .. City: Playa Vista .. Name: Rossi Wu.. (2) Function: Senior Regulatory Compliance Engineer Signature: . Notes: (1): Required for FCC application (2): For FCC it must be the Grantee Code “owner” or the authorized agent.

FCC, Request for non-disclosure Date: 21-Nov-2018 RF_501, Issue 8 Page 1 of 1 Company Name: Belkin International, Inc. Address:12045 East Waterfront Drive, Playa Vista, CA 90094,USA City: Playa Vista Country: USA To: Telefication B.V., Dept. FCC TCB Edisonstraat 12A 6902 PK ZEVENAAR The Netherlands Subject: Request for confidentiality FCC ID: K7SBPD001 Reference number: BPD001 Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application: Bill(s) of Material Block Diagrams Operational Description Schematic Diagrams Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, applicant hereby requests Short-Term Confidential treatment of the following materials (See notes below): Internal Photos User’s Manual Test Set-up Photos External Photos Justification: The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Date: 2021/02/08 Name and signature of applicant: Rossi Wu, Senior Regulatory Compliance Engineer Notes: 1) A document or type of document can only have ONE type of confidentiality! 2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)! The planned date should stated in the RF731 application form. 3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this! 5) Request for extension or for release must be received by Telefication at least 7 days before date of actual marketing or before expiration of the STC period

Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel.: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 1 of 4 Report Version 1 Reference No.: 2101WDG0121 PHOTOGRAPHS OF THE EUT Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel.: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 2 of 4 Report Version 1 Reference No.: 2101WDG0121 Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel.: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 3 of 4 Report Version 1 Reference No.: 2101WDG0121 Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel.: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 4 of 4 Report Version 1 Reference No.: 2101WDG0121

1mm 1mm XXXX.YY SCALE - 1:1 DATE: 02/02/2021REVISION: A08 DESIGNER: TK Rev1: A00 Rev2: A01 Pad print port graphics Rev3: A02 Black and white variants Rev4: A03 Add USB-A Outputt Rev5: A04 Update Cell Designation Rev6: A05 Change Top Graphic Color Rev7: A06 update wireless output voltage Rev8: A07 add Morocco, change date code, output wireless Rev9: A08 Update Designation, minor refinement DO NOT MAKE CHANGES WITHOUT PERMISSION FROM BELKIN IDG. BPD001 IDS-XXXXXX SPECIFICATIONS FOR PRODUCT Graphics, BLACK+WHITE BOOSTCHARGE™ (Zulu 10K) Magnetic Portable Wireless Charger ALL DIMENSIONS IN MM. Certification graphics - Silkscreen Logo Graphics - Silkscreen ELEMENTS SHOWN IN BLUE: ELEMENTS SHOWN IN RED: 0.1mm Recess Logo High Polished ELEMENTS SHOWN IN YELLOW: Korea Date Code - Laser Etch ELEMENTS SHOWN IN GREEN: BLACK SKU Finish WHITE SKU Pantone 428CPantone 427CPantone 427C Reference: Belkin Chip for Silkscreen on Black Reference: Belkin Chip for Silkscreen on Black Midghtnight black Snowcap White Reference: Belkin Chip for Silkscreen on Black Serial No. PRODUCT CODE PRODUCT VERSION CODE-REVIEW BELOW RULING MANUFACTURER CODE YEAR MONTH INCREMENTAL NUMBERS: START ON 10001. MONTHLY UNIT COUNT FONT: METRIC MEDIUM HEIGHT: 2.2 MM 2.8 19.03 PPPVVMMmyxxxxx Date code

Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel.: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 1 of 2 Report Version 1 Reference No.: 2101WDG0121 PHOTOGRAPHS OF THE EUT Coil ANT Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel.: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 2 of 2 Report Version 1 Reference No.: 2101WDG0121

J1 J1x1J1x2J1x3J1x4J1x5 R041 R041x1R041x2 R015 R015x1R015x2 R036 R036x1R036x2 LED6 LED6x1 LED6x2 L001 L001x1L001x2 R014 R014x1R014x2 V002 V002x1 J003 J003x1J003x2 J003x3J003x4 J003x5J003x6 J003xA1J003xA4J003xA5J003xA6J003xA7J003xA8J003xA9J003xA12J003xB1J003xB4J003xB5J003xB6J003xB7J003xB8J003xB9J003xB12 R007 R007x1R007x2 C50 C50x1 C50x2 Q004 Q004x1 Q004x2 Q004x3Q004x4 Q004x5 Q004x6 R034 R034x1 R034x2 C014 C014x1 C014x2 C013 C013x1 C013x2 R013 R013x1 R013x2 R033 R033x1 R033x2 D002 D002x1 D002x2 R010 R010x1 R010x2 R026 R026x1R026x2 C034 C034x1C034x2 C026 C026x1 C026x2 Q001 Q001x1Q001x2 Q001x3 C011 C011x1C011x2 C015 C015x1C015x2 C38 C38x1 C38x2 C016 C016x1 C016x2 D001 D001x1 D001x2 C46 C46x1 C46x2 C166 C166x1 C166x2 Q16 Q16x1Q16x2Q16x3Q16x4 Q16x5 Q16x6Q16x7 Q16x8 C051 C051x1C051x2 R3 R3x1R3x2 R56 R56x1R56x2 R025 R025x1R025x2 Q002 Q002x1 Q002x2 Q002x3Q002x4 Q002x5 Q002x6 V001 V001x1 C009 C009x1C009x2 C008 C008x1C008x2 C007 C007x1C007x2 C012 C012x1 C012x2 C050 C050x1 C050x2 R016 R016x1R016x2 Q005 Q005x1 Q005x2 Q005x3Q005x4 Q005x5 Q005x6 C39 C39x1 C39x2 R018 R018x1R018x2 C47 C47x1C47x2 TP001 TP001x1 R009 R009x1R009x2 C002 C002x1 C002x2 C006 C006x1 C006x2 C005 C005x1 C005x2 C023 C023x1C023x2 D005 D005x1D005x2 U004 U004x0 U004x1 U004x2 U004x3 U004x4 U004x5 U004x6 U004x7 U004x8 U004x9 C001 C001x1 C001x2 U001 U001x0 U001x1 U001x2 U001x3 U001x4 U001x5 U001x6 U001x7 U001x8 U001x9 C010 C010x1 C010x2 D011 D011x1 D011x2 U002 U002x1 U002x2 U002x3 U002x4 U002x5 U002x6 U002x7 U002x8 U002x9U002x10U002x11U002x12U002x13U002x14U002x15U002x16 U002x17 U002x18 U002x19 U002x20 U002x21 U002x22 U002x23 U002x24 U002x25U002x26U002x27U002x28U002x29U002x30U002x31U002x32 U002x33 U002x34 U002x35 U002x36 U002x37 J004 J004x1J004x2J004x3J004x4 J004x5J004x6 J004x7J004x8 J3 J3x1J3x2 TP66 TP66x1 TP67 TP67x1 TP82 TP82x1 TP83 TP83x1 S001 S001x1 S001x2 S001x3 TP4 TP4x1 TP5 TP5x1 R038 R038x1 R038x2 LED1 LED1x1 LED1x2 RNTC RNTCx1RNTCx2 LED7 LED7x1 LED7x2 LED7x3 LED7x4 J003 J003x1J003x2 J003x3J003x4 J003x5J003x6 J004 J004x1J004x2J004x3J004x4 J004x5J004x6 J004x7J004x8 S001 S001x1 S001x2 S001x3 J003 J003x1J003x2 J003x3J003x4 J003x5J003x6 J004 J004x1J004x2J004x3J004x4 J004x5J004x6 J004x7J004x8 S001 S001x1 S001x2 S001x3 C028 C028x1C028x2 R043 R043x1R043x2 R008 R008x1R008x2 R006 R006x1R006x2 C036 C036x1 C036x2 R037 R037x1 R037x2 R044 R044x1 R044x2 Q3 Q3x1 Q3x2 Q3x3 Q3x4 Q3x5 Q3x6 Q3x7 Q3x8 C167 C167x1C167x2 C43 C43x1C43x2 C45 C45x1 C45x2 R021 R021x1 R021x2 C44 C44x1C44x2 C42 C42x1C42x2 LED2 LED2x1LED2x2 LED3 LED3x1LED3x2 LED4 LED4x1LED4x2 LED5 LED5x1LED5x2 R039 R039x1 R039x2 R45 R45x1 R45x2 R42 R42x1 R42x2 J003 J003x1J003x2 J003x3J003x4 J003x5J003x6 C72 C72x1 C72x2 R024 R024x1R024x2 C027 C027x1 C027x2 C067 C067x1 C067x2 C025 C025x1 C025x2 R032 R032x1R032x2 C62 C62x1C62x2 C52 C52x1C52x2 C48 C48x1 C48x2 C066 C066x1 C066x2 C32 C32x1C32x2 R002 R002x1R002x2 Q007 Q007x1 Q007x2 Q007x3Q007x4 Q007x5 Q007x6 TP003 TP003x1 TP002 TP002x1 C017 C017x1 C017x2 R001 R001x1 R001x2 R011 R011x1 R011x2 R012 R012x1 R012x2 C062 C062x1 C062x2 C061 C061x1 C061x2 R030 R030x1R030x2 D007 D007x1D007x2 C030 C030x1C030x2 C35 C35x1C35x2 C063 C063x1C063x2 C37 C37x1 C37x2 U12 U12x1 U12x2 U12x3 U12x4 U12x5 U12x6 U12x7 U12x8 U12x9 U12x10 U12x11 U12x12 U12x13U12x14U12x15U12x16U12x17U12x18U12x19U12x20U12x21U12x22U12x23U12x24 U12x25 U12x26 U12x27 U12x28 U12x29 U12x30 U12x31 U12x32 U12x33 U12x34 U12x35 U12x36 U12x37U12x38U12x39U12x40U12x41U12x42U12x43U12x44U12x45U12x46U12x47U12x48 U12x49 R11 R11x1 R11x2 Y2 Y2x1 Y2x2Y2x3 Y2x4 Q006 Q006x1Q006x2Q006x3 Q006x4Q006x5Q006x6 C70 C70x1C70x2 R53 R53x1R53x2 C60 C60x1C60x2 C19 C19x1C19x2 C59 C59x1C59x2 C69 C69x1C69x2 R017 R017x1 R017x2 R005 R005x1 R005x2 R50 R50x1R50x2 R8 R8x1R8x2 R023 R023x1R023x2 R022 R022x1R022x2 C68 C68x1C68x2 D009 D009x1D009x2 R12 R12x1 R12x2 C49 C49x1 C49x2 R028 R028x1R028x2 R41 R41x1R41x2 R40 R40x1R40x2 C018 C018x1 C018x2 C031 C031x1C031x2 D006 D006x1 D006x2 C162 C162x1 C162x2 C163 C163x1 C163x2 C164 C164x1 C164x2 C168 C168x1 C168x2 C276 C276x1 C276x2 C029 C029x1C029x2 C021 C021x1C021x2 C065 C065x1C065x2 C022 C022x1C022x2 D012 D012x1D012x2 C024 C024x1 C024x2 C004 C004x1 C004x2 C003 C003x1 C003x2 R031 R031x1R031x2 R035 R035x1R035x2 R019 R019x1R019x2 R029 R029x1 R029x2 C41 C41x1 C41x2 R027 R027x1 R027x2 C40 C40x1C40x2 R4 R4x1R4x2 C033 C033x1C033x2 U003 U003x1U003x2U003x3U003x4U003x5U003x6U003x7U003x8 U003x9 U003x10 U003x11 U003x12 U003x13 U003x14 U003x15 U003x16 U003x17U003x18U003x19U003x20U003x21U003x22U003x23U003x24 U003x25 U003x26 U003x27 U003x28 U003x29 U003x30 U003x31 U003x32 U003x33 D004 D004x1D004x2 C020 C020x1C020x2 J004 J004x1J004x2J004x3J004x4 J004x5J004x6 J004x7J004x8 S001 S001x1 S001x2 S001x3 R020 R020x1R020x2 R046 R046x1 R046x2 C053 C053x1C053x2 C054 C054x1C054x2 C57 C57x1C57x2 J003 D011 R007 J004 C010 C011 R010 C050 C008 C026 C034 C002 C005 C007 C009 C012C013 C014 C016 L001 Q002 Q004 Q001 R033R034 R009 R013 R016 R041 U002 V001 V002 C015 C023 C006 D001D002 J1 R025 R026 U001 Q005 D005 C001 U004 C166 R3 R56 C47 C46 C38 C50 C39 R018 J3 C051 S001 R015 R036 R038 RNTC R014 LED7 Q16 J1 J1x1J1x2J1x3J1x4J1x5 R041 R041x1R041x2 R015 R015x1R015x2 R036 R036x1R036x2 LED6 LED6x1 LED6x2 L001 L001x1L001x2 R014 R014x1R014x2 V002 V002x1 J003 J003x1J003x2 J003x3J003x4 J003x5J003x6 J003xA1J003xA4J003xA5J003xA6J003xA7J003xA8J003xA9J003xA12J003xB1J003xB4J003xB5J003xB6J003xB7J003xB8J003xB9J003xB12 R007 R007x1R007x2 C50 C50x1 C50x2 Q004 Q004x1 Q004x2 Q004x3Q004x4 Q004x5 Q004x6 R034 R034x1 R034x2 C014 C014x1 C014x2 C013 C013x1 C013x2 R013 R013x1 R013x2 R033 R033x1 R033x2 D002 D002x1 D002x2 R010 R010x1 R010x2 R026 R026x1R026x2 C034 C034x1C034x2 C026 C026x1 C026x2 Q001 Q001x1Q001x2 Q001x3 C011 C011x1C011x2 C015 C015x1C015x2 C38 C38x1 C38x2 C016 C016x1 C016x2 D001 D001x1 D001x2 C46 C46x1 C46x2 C166 C166x1 C166x2 Q16 Q16x1Q16x2Q16x3Q16x4 Q16x5 Q16x6Q16x7 Q16x8 C051 C051x1C051x2 R3 R3x1R3x2 R56 R56x1R56x2 R025 R025x1R025x2 Q002 Q002x1 Q002x2 Q002x3Q002x4 Q002x5 Q002x6 V001 V001x1 C009 C009x1C009x2 C008 C008x1C008x2 C007 C007x1C007x2 C01…

Text truncated - open the document above for the full version.

Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel.: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 1 of 13 Report Version 1 Test Report No.: FM2101WDG0121 RF EXPOSURE TEST REPORT Applicant Belkin International, Inc Address 12045 East Waterfront Drive, Playa Vista, CA 90094, USA Manufacturer or Supplier Belkin International, Inc Address 12045 East Waterfront Drive, Playa Vista, CA 90094, USA Product BOOST↑CHARGE TM Magnetic Portable Wireless Charger Brand Name belkin Model BPD001 Additional Model & Model Difference N/A Date of tests Jan. 12, 2021 ~ Feb. 04, 2021 The submitted sample of the above equipment has been tested according to the requirements of the following standard: 47 CFR PART 1, Subpart I, Section 1.1310 KDB 680106 D01 CONCLUSION: The submitted sample was found to COMPLY with the test requirement Tested by Lucas Chen Project Engineer / EMC Department Approved by Glyn He Assistant Manager / EMC Department Data: Mar. 09, 2021 This report is governed by, and incorporates by reference, CPS Conditions of Service as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our-business/cps/about-us/terms-conditions/and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute you unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel.: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 2 of 13 Report Version 1 Test Report No.: FM2101WDG0121 TABLE OF CONTENTS RF EXPOSURE TEST REPORT ................................................................................................................1 RELEASE CONTROL RECORD ..................................................................................................................3 1. GENERAL INFORMATION ..................................................................................................................4 1.1. GENERAL DESCRIPTION OF EUT ............................................................................................4 2. RF EXPOSURE MEASUREMENT ......................................................................................................5 2.1 LIMITS .........................................................................................................................................5 2.2 DESCRIPTION OF SUPPORT UNITS ........................................................................................5 2.3 CONFIGURATION OF SYSTEM UNDER TEST .........................................................................6 2.4 TEST SETUP FOR WPC .............................................................................................................6 2.5 EQUIPMENTS USED DURING TEST.........................................................................................7 2.6 TEST POINT DESCRIPTION ......................................................................................................7 2.7 TEST RESULTS ..........................................................................................................................8 3. PHOTOGRAPHS OF THE TEST CONFIGURATION....................................................................... 13 Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel.: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 3 of 13 Report Version 1 Test Report No.: FM2101WDG0121 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED FM2101WDG0121 Original release Mar. 09, 2021 Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel.: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 4 of 13 Report Version 1 Test Report No.: FM2101WDG0121 1. GENERAL INFORMATION 1.1. GENERAL DESCRIPTION OF EUT FCC ID K7SBPD001 PRODUCT BOOST↑CHARGE TM Magnetic Portable Wireless Charger MODEL NO. BPD001 ADDITIONAL MODEL N/A POWER SUPPLY Input USB-C: 5.0V⎓3.0A, 9.0V⎓2.0A Output USB-A: 5.0V⎓2.4A Output USB-C: 5.0V⎓3.0A, 9.0V⎓2.0A, 12.0V⎓1.5A Output (USB-A and USB-C shared): total 5.0V⎓3.0A, 15.0W Output wireless: 5V ⎓5W, 7.5V⎓7.5W, 9V⎓10W Cell Capacity: 37Wh, 3.7V 10000mAh MODULATION TECHNOLOGY FSK OPERATING FREQUENCY RANGE 111KHz ~ 148KHz ANTENNA TYPE Coil Antenna I/O PORTS Refer to user’s manual CABLE SUPPLIED See notes 4 NOTES: 1. For a more detailed features des…

Text truncated - open the document above for the full version.

Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 1 of 59 Report Version 1 Test Report No.: RF2101WDG0121 TEST REPORT Applicant Belkin International, Inc. Address 12045 East Waterfront Drive, Playa Vista, CA 90094 USA Manufacturer or Supplier Belkin International, Inc. Address 12045 East Waterfront Drive, Playa Vista, CA 90094 USA Product BOOST↑CHARGE TM Magnetic Portable Wireless Charger Brand Name belkin Model BPD001 Additional Model & Model Difference N/A Date of tests Jan. 12, 2021 ~ Feb. 04, 2021 The submitted sample of the above equipment has been tested for according to the requirements of the following standards: FCC Part 15, Subpart C CONCLUSION: The submitted sample was found to COMPLY with the test requirement Tested by Lucas Chen Project Engineer / EMC Department Approved by Glyn He Assistant Manager/ EMC Department Date: Mar. 09, 2021 This report is governed by, and incorporates by reference, CPS Conditions of Service as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our-business/cps/about-us/terms-conditions/and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute you unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 2 of 59 Report Version 1 Test Report No.: RF2101WDG0121 TABLE OF CONTENTS RELEASE CONTROL RECORD ............................................................................................................. 3 1 SUMMARY OF TEST RESULTS...................................................................................................... 4 2 MEASUREMENT UNCERTAINTY ................................................................................................... 4 3 GENERAL INFORMATION .............................................................................................................. 5 3.1 GENERAL DESCRIPTION OF EUT .......................................................................................... 5 3.2 DESCRIPTION OF TEST MODES ............................................................................................ 6 3.3 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ............................................ 6 3.4 DESCRIPTION OF SUPPORT UNITS ...................................................................................... 7 3.5 CONFIGURATION OF SYSTEM UNDER TEST ....................................................................... 8 3.6 GENERAL DESCRIPTION OF APPLIED STANDARDS ........................................................... 8 4 EMISSION TEST .............................................................................................................................. 9 4.1 CONDUCTED EMISSION MEASUREMENT ............................................................................ 9 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT .............…

Text truncated - open the document above for the full version.