K7SF5L171Belkin QODE Ultimate Pro Keyboard Case for iPad

QIG 23456 23456 PRIMAX ELECTRONICS LTD. 致伸資訊電子有限公司 USED FINISH SCALE TITLE DWG NO . FILE NAMESHEET DR. CHKD. APPD. UNIT mm DO NOT SCALE DRAWING THESE DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF PRIMAX ELECTRONICS LTD. AND SHALL NOT BE REPRODUCED COPIED OR USED IN ANY MANNER WITHOUT THE PRIOR WRITTEN CONSENT OF PRIMAX ELECTRONICS LTD. DIMENSIONS 0.00 TO 30.00mm +0.10mm 30.01 TO 80.00mm +0.13mm 80.01 TO 150.00mm +0.15mm 150.01 +0.20mm TOLERANCE MATERIAL REV. DESCRIPTION ENG. APPROVAL UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS ANGULAR TOLERANCE:+1.0 300G雙銅 NOTE:1.印刷顏色,四色二專,雙面印刷, 具體請參考樣品. 2.Tolerance:+/-1mm 3.*is important dimension 30500290400A F5L171 30500290400A 17 17 A B C D E A B C D E REV. SIZE A4 1 1 2 Cheery.Qiao 14-08-13 Iven.Yao 5. Requirement of Primax Green Part: 1.Comply with Primax QW-5Q002 "Green Product Chemical Substances Specification 2.Follow customer's specification as required 3.Follow Halogen- Free requirement : Br<900 ppm, Cl<900 ppm, Br+Cl< 1500 ppm if required. 4. Product must be halogen free Sarah.lee 正反面過啞膠 正面 *241.5mm *169.5 mm 背面 30500290400A 2 0版未發行 Cheery.Qiao 2014-07-03 Sarah.Leee 2014-07-03

Belkin International, Inc. 12045 East Waterfront Drive Playa Vista California 90094 United States Tel: 1 (310) 751-2816 Fax: 1 (310) 751-5912 Date: July 30, 2014 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request FCC ID: K7SF5L171 Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: Schematics Block Diagram The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely yours, _____________________________ Daniel Wesey EMC Regulatory Compliance Engineer E-Mail : [email protected] Tel.: 1 (310) 751-2816

Belkin International, Inc. 12045 East Waterfront Drive Playa Vista California 90094 United States Tel: 1 (310) 751-2816 Fax: 1 (310) 751-5912 Date: 2014-08-11 FCC ID: K7SF5L171 To the attention of Federal Communications Commission Authorization and Evaluation Division Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the commission’s rules, we request short-term confidential treatment for the following information until (2014/Dec/31) after the Grant Date of Equipment Authorization) in order to ensure sensitive business information remains confidential until the actual marketing of the device: External photos Test Setup photos User’s manual Internal Photos Sincerely yours, _____________________________ Daniel Wesey EMC Regulatory Compliance Engineer E-Mail : [email protected] Tel.: 1 (310) 751-2816

Belkin International, Inc. 12045 East Waterfront Drive Playa Vista California 90094 United States Tel: 1 (310) 751-2816 Fax: 1 (310) 751-5912 Power of Attorney Date: July 30, 2014 To whom it may concern: We, the undersigned Belkin International, Inc. hereby authorize Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan Branch) of Taiwan to act on our behalf in all matters relating to all processes required in the FCC Part 15C approval and any communication needed with the national authority. Any and all acts carried out by BV CPS Taoyuan Branch on our behalf shall have the same effects as acts of our own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Thank you! Sincerely yours, _____________________________ Daniel Wesey EMC Regulatory Compliance Engineer E-Mail : [email protected] Tel.: 1 (310) 751-2816

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2 Page 3 Page 4 Page 5

PRINT GRAPHICS COLOR ON BLACK HINGE: PMS 431c COLOR ON GRAY HINGE: PMS 430c 3.0mm 1.Product Must be Halogen Free 2.Requirement of PRIMAX Part: 1.Comply with PRIMAX QW-5Q002 "Green Product Chemical Substances Specification" 2.Follow customer's specification as required. 3.Follow Halogen- Free requirement : Br<900 ppm, Cl<900 ppm, Br+Cl< 1500 ppm if required. 1 Certification Printing 2014/06/25 2014/06/25 2014/06/25 River Fu Lisa Mai Original layout:according to the customer file. Layout NA Certification Printing Belkin V3 H 5.0mm 145.0mm

Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13

FCC ID: K7SF5L171 Report No.: RF140728D03 Operational Description This device is a Belkin QODE Ultimate Pro Keyboard Case for iPad. The transmitter of the EUT is powered by 3.7Vdc (from battery) or 5.0Vdc (from Adapter). The antenna is Printed antenna without antenna connector. For more detailed instruction, please take a look at the user’s manual.

Report No.: SA140728D03 1 of 6 Report Format Version 5.0.1 RF EXPOSURE REPORT REPORT NO.: SA140728D03 MODEL NO.: F5L171 FCC ID: K7SF5L171 RECEIVED: Jul. 28, 2014 TESTED: Aug. 21 ~ 22, 2014 ISSUED: Aug. 26, 2014 APPLICANT: Belkin International, Inc. ADDRESS: 12045 East Waterfront Dr. Playa Vista CA United States 90094 ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB LOCATION: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan ( R.O.C. ) This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. Report No.: SA140728D03 2 of 6 Report Format Version 5.0.1 Table of Contents RELEASE CONTROL RECORD ................................................................................. 3 1. CERTIFICATION ............................................................................................... 4 2. EVALUATION RESULT ..................................................................................... 5 3. SAR TEST EXCLUSION THRESHOLDS ......................................................... 6 4. CONCLUSION .................................................................................................. 6 Report No.: SA140728D03 3 of 6 Report Format Version 5.0.1 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED SA140728D03 Original release Aug. 26, 2014 Report No.: SA140728D03 4 of 6 Report Format Version 5.0.1 1. CERTIFICATION PRODUCT: Belkin QODE Ultimate Pro Keyboard Case for iPad BRAND NAME: Belkin MODEL NO.: F5L171 APPLICANT: Belkin International, Inc. TESTED: Aug. 21 ~ 22, 2014 TEST SAMPLE: ENGINEERING SAMPLE STANDARDS: FCC Part 2 (Section 2.1093) KDB 447498 D03 IEEE C95.1 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE:Aug. 26, 2014 ( Annie Chang / Supervisor ) APPROVED BY : , DATE:Aug. 26, 2014 ( Rex Lai / Assistant Manager ) Report No.: SA140728D03 5 of 6 Report Format Version 5.0.1 2. EVALUATION RESULT Following FCC KDB 447498 D01 “General SAR test exclusion guidance” The corresponding SAR Exclusion Threshold condition, listed below: 1) The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR,16 where  f(GHz) is the RF channel transmit frequency in GHz .  Power and distance are rounded to the nearest mW and mm before calculation.  The result is rounded to one decimal place for comparison The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. 2) At 100 MHz to 6 GHz and for test separation distances > 50 mm, the SAR test exclusion threshold is determined according to the following: a) [Threshold at 50 mm in step 1) + (test separation distance - 50mm)·( f(MHz)/150)] mW, at 100MHz to 1500 MHz b) [Threshold at 50 mm in step 1) + (test separation distance - 50 mm)·10] mW at > 1500 MHz and ≤ 6 GHz 3) At frequencies below 100 MHz, the following may be considered for SAR test exclusion. a) The threshold at the corresponding test separation distance at 100 MHz in step 2) is multiplied by [1 + log(100/f(MHz))] for test separation distances > 50 mm and < 200 mm. b) The threshold determined by the equation in a) for 50 mm and 100 MHz is multiplied by ½ for test separation distances ≤ 50 mm. c) SAR measurement procedures are not established below 100 MHz. When SAR test exclusion cannot be applied, a KDB inquiry is required to determine SAR evaluation requirements for any test results to be acceptable. Report No.: SA140728D03 6 of 6 Report Format Version 5.0.1 3. SAR TEST EXCLUSION THRESHOLDS Maximum measured transmitter power: Frequency (GHz) Max. Power (mW) Min. test separation distance (mm) SAR test exclusion calculation value (NOTE 2) 1-g SAR test exclusion thresholds Result 2.402 ~ 2.480 1.4 5 0.434 3 Pass NOTE: 1. The antenna type is Printed Antenna with 2.02dBi gain. 2. Calculate SAR test exclusion thresholds from condition “1” formulas. 4. CONCLUSION Since Source-base time average power is below SAR test exclusion power thresholds, the SAR evaluation is not required.

Report No.: RF140728D03 1 of 39 Report Format Version 5.2.1 FCC TEST REPORT REPORT NO.: RF140728D03 MODEL NO.: F5L171 FCC ID: K7SF5L171 RECEIVED: Jul. 28, 2014 TESTED: Aug. 21 ~ 22, 2014 ISSUED: Aug. 26, 2014 APPLICANT: Belkin International, Inc. ADDRESS: 12045 East Waterfront Dr. Playa Vista CA United States 90094 ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan ( R.O.C. ) This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the com pliance or non-compliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF140728D03 2 of 39 Report Format Version 5.2.1 Table of Contents RELEASE CONTROL RECORD ................................................................................. 4 1. CERTIFICATION ............................................................................................... 5 2. SUMMARY OF TEST RESULTS ...................................................................... 6 2.1 MEASUREMENT UNCERTAINTY .................................................................... 6 3. GENERAL INFORMATION ............................................................................... 7 3.1 GENERAL DESCRIPTION OF EUT ................................................................. 7 3.2 DESCRIPTION OF TEST MODES ................................................................... 8 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL .................... 9 3.3 DUTY CYCLE OF TEST SIGNAL ................................................................... 11 3.4 DESCRIPTION OF SUPPORT UNITS ........................................................... 12 3.4.1 CONFIGURATION OF SYSTEM UNDER TEST ............................................. 12 3.5 GENERAL DESCRIPTION OF APPLIED STANDARDS ................................. 13 4. TEST TYPES AND RESULTS ........................................................................ 14 4.1 RADIATED EMISSION AND BANDEDGE MEASUREMENT ......................... 14 4.1.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT ........................................................................................... 14 4.1.2 TEST INSTRUMENTS .................................................................................... 15 4.1.3 TEST PROCEDURES .................................................................................... 16 4.1.4 DEVIATION FROM TEST STANDARD ........................................................... 16 4.1.5 TEST SETUP .................................................................................................. 17 4.1.6 EUT OPERATING CONDITIONS ................................................................... 18 4.1.7 TEST RESULTS ............................................................................................. 19 4.2 CONDUCTED EMISSION MEASUREMENT .................................................. 23 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT ............................... 23 4.2.2 TEST INSTRUMENTS .................................................................................... 23 4.2.3 TEST PROCEDURES .................................................................................... 24 4.2.4 DEVIATION FROM TEST STANDARD ........................................................... 24 4.2.5 TEST SETUP .................................................................................................. 25 4.2.6 EUT OPERATING CONDITIONS ................................................................... 25 4.2.7 TEST RESULTS ............................................................................................. 26 4.3 6DB BANDWIDTH MEASUREMENT ............................................................. 28 4.3.1 LIMITS OF 6DB BANDWIDTH MEASUREMENT ........................................... 28 4.3.2 TEST SETUP .................................................................................................. 28 4.3.3 TEST INSTRUMENTS .................................................................................... 28 4.3.4 TEST PROCEDURE ....................................................................................... 28 4.3.5 DEVIATION FROM TEST STANDARD ........................................................... 28 4.3.6 EUT OPERATING CONDITIONS ................................................................... 28 4.3.7 TEST RESULTS ............................................................................................. 29 Report No.: RF140728D03 3 of 39 Report Format Version 5.2.1 4.4 CONDUCTED OUTPUT POWER ................................................................... 30 4.4.1 LIMITS OF CONDUCTED OUTPUT…

Text truncated - open the document above for the full version.

1 of 2 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST 2 of 2 RADIATED EMISSION TEST