K7SF7C028WeMo Motion Sensor

Confidential property of Belkin Corporation. Unlawful to copy or reproduce in any manner without the express written consent of Belkin Corporation. 1 of 12 WeMo Motion Sensor – User Guide ---- INSTRUCTIONS FOR MARKETING SERVICES TEAM ---- The dimensions of the user guides are 2.875 inches by 4.4375 inches. This user guide should be monochrome only. We must create the most cost effective user guide as possible. Please optimize for production and folding. This user guide needs to be in both English and French. The below content table does not need to be included, but everything after it does. Please refer to QIG for Home Control Switch from branding as a reference for style (ignore that is it in color). Content Getting Started .................................................................................................................................................................... 2 What’s in the Box........................................................................................................................................................... 2 Initial Setup ..................................................................................................................................................................... 2 Adding a Device ....................................................................................................... Error! Bookmark not defined. Getting to Know your Home Control Outlet ................................................................................................................ 5 Hardware ......................................................................................................................................................................... 5 WeMo App ............................................................................................................... Error! Bookmark not defined. Switches ................................................................................................................ Error! Bookmark not defined. Sensors .................................................................................................................. Error! Bookmark not defined. Rules ...................................................................................................................... Error! Bookmark not defined. More ...................................................................................................................... Error! Bookmark not defined. Remote Access ......................................................................................................... Error! Bookmark not defined. Remote Access Disabled .................................................................................... Error! Bookmark not defined. Remote Access Enabled ..................................................................................... Error! Bookmark not defined. Technical Details ................................................................................................................................................................ 6 Technical Features ......................................................................................................................................................... 6 System Requirements .................................................................................................................................................... 6 Troubleshooting, Support and Warranty ........................................................................................................................ 7 FAQ ................................................................................................................................................................................. 7 Troubleshooting ............................................................................................................................................................. 7 Technical Support .......................................................................................................................................................... 7 Product Warranty ........................................................................................................................................................... 9 Regulatory Information ................................................................................................................................................... 11 FCC Statement ............................................................................................................................................................. 11 Confidential property of Belkin Corporation. Unlawful to copy or reproduce in any manner without the express written consent of Belkin Corporation. 2 of 12 Motion Sensor Belkin (plug logo) (line drawing of motion sensor) User Guide Getting Started What’s in the Box WeMo Motion Sensor Quick Install Guide User Guide Setup For the best results, place the WeMo device near your wireless router in an open location away from large metal objects and magnets such as those found in speakers. Confidential property of Belkin Corporation. Unlawful to copy or reproduce in any manner without the express written consent of Belkin Corporation. 3 of 12 What you’ll need to get started. + + Wireless Router with; - your Wi-Fi network name - your Wi-Fi network password Apple iPhone (running iOS 4.1 or higher) or Android Smartphone (running Android v2.3 or higher) WeMo Home Control Outlet The Motion Sensor requires a Home Control Outlet to function 1 Plug your Sensor Module into an AC wall outlet, then position the Motion Sensor If you have purchased multiple new WeMo devices, just plug in and setup one at a time for simplicity. The Motion Sensor can detect moving objects within a 10 foot range. 2 Connect your Motion Sensor to your Wi-Fi network iPhone Open Settings Select Wi-Fi Connect to the network name that starts with “B.…

Text truncated - open the document above for the full version.

Belkin International, Inc. 12045 East Waterfront Drive, Playa Vista, CA 90094 USA FCC DFS Declaration letter Date: 2011-12-08 To whom it may concern: We, Belkin International Inc., declare that the device does not support any non-US channels in all the operational mode(s) for the following product. FCC ID: K7SF7C028 If you should have any question(s) regarding this declaration, please don’t hesitate to contact us. Thank you! __________________________________________ Daniel Wesey / EMC Regulatory Compliance Engineer Belkin International, Inc. Tel: 310-751-2816 Fax: 310-751-5912 e-mail: [email protected]

Belkin International, Inc. 12045 East Waterfront Drive, Playa Vista, CA 90094 USA FCC ID: K7SF7C028 Date: 2011.12.08 F E D E R A L C O M M U N I C A T I O N S C O M M I S S I O N Authorization and Evaluation Division C o n f i d e n t i a l i t y R e q u e s t Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the applicant hereby requests confidential treatment of information accompanying this application as outlined below: Schematics Block Diagram The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulatins in 47CFR §2.803 and the importation rules in 47CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commsission to grant short-term confidentiality request on the following attachments for 180 days. External photos Internal photos Test setup photos User’s manual It is our understanding that all measurement test reports, FCC ID label format and correspondnet during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, ___________________________ Daniel Wesey / EMC Regulatory Compliance Engineer Belkin International, Inc. Tel: 310-751-2816 Fax: 310-751-5912 e-mail: [email protected]

Belkin International, Inc. 12045 East Waterfront Drive, Playa Vista, CA 90094 USA A G E N C Y A U T H O R I Z A T I O N L E T T E R FCC ID: K7SF7C028 Date: 2011-12-13 To whom it may concern: We, the undersigned, hereby authorize Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan) of Taiwan to act on our behalf, as our agent, in the following matters related to the FCC approval of our products: report submittal, related correspondence, the signing of all documents relating to these matters, and any other lawful activity necessary to obtain such certification. Any act carried out by BV CPS Taoyuan within the scope of this authorization shall have the same effects as our own. This authorization shall expire 6 months from original date. If you have any questions regarding the authorization, please don’t hesitate to contact us. Thank you. Sincerely, ___________________________ Daniel Wesey / EMC Regulatory Compliance Engineer Belkin International, Inc. Tel: 310-751-2816 Fax: 310-751-5912 e-mail: [email protected]

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2 Sensor Page 3

DESIGNER: mw DO NOT MAKE CHANGES WITHOUT PERMISSION FROM BELKIN IDG. ALL DIMENSIONS IN mm. SCALE 1:1 LABEL MATERIAL: Mylar with Matte PP finish ELEMENTS SHOWN IN DARK GRAY: PANTONE 425C ELEMENTS SHOWN IN LIGHT GRAY: PANTONE COOL GRAY 1C ELEMENTS SHOWN IN BLACK: BLACK INNOVATION DESIGN GROUP DATE: 2011.11.28REVISION: A00 REVISION NOTES: A00 INITIAL RELEASE CERTIFICATION LABEL IDA-000107 F7C028 WeMo MOTION SENSOR THIS IS AN EDITABLE PDF DRAWING ARTWORK TO PRINT ON LAYER ‘ARTWORK’ LABEL OUTLINES ON LAYER ‘LABEL OUTLINE’ BELKIN CONFIDENTIAL THIS DOCUMENT & THE INFORMATION CONTAINED IN IT ARE THE CONFIDENTIAL PROPERTY OF BELKIN CORPORATION, AND MUST NOT BE COPIED, REPRODUCED OR USED IN ANY MANNER WITHOUT THE WRITTEN CONSENT OF BELKIN CORPORATION. IT MUST BE RETURNED UPON REQUEST. WeMo ID: B.XXX Serial No: XXXXXXXXXXXXXX MAC: XXXXXXXXXXXXXX WeMo ID: B.XXX Serial No: XXXXXXXXXXXXXX MAC: XXXXXXXXXXXXXX Elements within red boxes are to be printed in BLACK on pre-printed label at the factory. *** Please try to use the same font and keep the printed element within the red boxes’ dimensions. *** 56.600 49.600 7.0 5.0 R0.800 30.0 16.0 8.0

Page 4 Page 5 Page 6 Page 7 Sensor Page 8

FCC ID: K7SF7C028 Report No.: RF111205C11 Operational Description This device is a WeMo Motion Sensor, which operates in 2.4GHz band; the maximum data rate could be up to 150Mbps which OFDM technique. If the signal to noise radio is too poor which could not support 150Mbps, the 11Mbps data rate with DSSS technique will be applied. The transmitter of the EUT is powered by the 5Vdc power adapter. The antenna is Printed antenna without antenna connector. The other instruction, please have a look at the users manual.

Report No.: SA111205C11 Report Format Version 4.0.0 1 RF EXPOSURE REPORT REPORT NO.: SA111205C11 MODEL NO.: F7C028 FCC ID: K7SF7C028 RECEIVED: Oct. 21, 2011 TESTED: Nov. 04 ~ Nov. 14, 2011 ISSUED: Dec. 09, 2011 APPLICANT: Belkin International, Inc. ADDRESS: 12045 East Waterfront Drive, Playa Vista, CA 90094 USA ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan (R.O.C) TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This test report consists of 5 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced, except in full, without the written approval of our laboratory. The client should not use it to claim product, certification, approval, or endorsement by any government agency. The test results in the report only apply to the tested sample. Report No.: SA111205C11 Report Format Version 4.0.0 2 TABLE OF CONTENTS RELEASE CONTROL RECORD ................................................................................................ 3 1. CERTIFICATION ............................................................................................................. 4 2. RF EXPOSURE............................................................................................................... 5 2.1 LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE)......................................... 5 2.2 MPE CALCULATION FORMULA .................................................................................... 5 2.3 CLASSIFICATION ........................................................................................................... 5 2.4 CALCULATION RESULT OF MAXIMUM CONDUCTED POWER.................................. 5 Report No.: SA111205C11 Report Format Version 4.0.0 3 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED Original release NA Dec. 09, 2011 Report No.: SA111205C11 Report Format Version 4.0.0 4 1. CERTIFICATION PRODUCT: WeMo Motion Sensor MODEL: F7C028 BRAND: Belkin APPLICANT: Belkin International, Inc. TEST SAMPLE: ENGINEERING SAMPLE TESTED: Nov. 04 ~ Nov. 14, 2011 STANDARDS: FCC Part 2 (Section 2.1091) FCC OET Bulletin 65, Supplement C (01-01) IEEE C95.1 The above equipment (Model: F7C028) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE :Dec. 09, 2011 Pettie Chen / Specialist APPROVED BY : , DATE : Dec. 09, 2011 Gary Chang / Technical Manager Report No.: SA111205C11 Report Format Version 4.0.0 5 2. RF EXPOSURE 2.1 LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) FREQUENCY RANGE (MHz) ELECTRIC FIELD STRENGTH (V/m) MAGNETIC FIELD STRENGTH (A/m) POWER DENSITY (mW/cm 2 ) AVERAGE TIME (minutes) LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE 300-1500 ... ... F/1500 30 1500-100,000 ... ... 1.0 30 F = Frequency in MHz 2.2 MPE CALCULATION FORMULA Pd = (Pout*G) / (4*pi*r2) where Pd = power density in mW/cm2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 2.3 CLASSIFICATION The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. 2.4 CALCULATION RESULT OF MAXIMUM CONDUCTED POWER FREQUENCY BAND (MHz) MAX POWER (dBm) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/cm 2 ) LIMIT (mW/cm 2 ) 2412-2462 25.4 3.71 20 0.162 1.00

Report No.: RF111205C11 1 Report Format Version 4.1.0 FCC TEST REPORT REPORT NO.: RF111205C11 MODEL NO.: F7C028 FCC ID: K7SF7C028 RECEIVED: Oct. 21, 2011 TESTED: Nov. 04 ~ Nov. 14, 2011 ISSUED: Dec. 09, 2011 APPLICANT: Belkin International, Inc. ADDRESS: 12045 East Waterfront Drive, Playa Vista, CA 90094 USA ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan (R.O.C) TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This test report consists of 49 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product, certification, approval or endorsement by TAF or any government agency. The test results in the report only apply to the tested sample. The test results in this report are traceable to the national or international standards. Report No.: RF111205C11 2 Report Format Version 4.1.0 TABLE OF CONTENTS RELEASE CONTROL RECORD......................................................................................... 4 1. CERTIFICATION ................................................................................................... 5 2. SUMMARY OF TEST RESULTS ........................................................................... 6 2.1 MEASUREMENT UNCERTAINTY ........................................................................ 6 3. GENERAL INFORMATION.................................................................................... 7 3.1 GENERAL DESCRIPTION OF EUT ...................................................................... 7 3.2 DESCRIPTION OF TEST MODES ........................................................................ 8 3.2.1 CONFIGURATION OF SYSTEM UNDER TEST ................................................... 9 3.2.2 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ...................... 10 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS ..................................... 12 3.4 DESCRIPTION OF SUPPORT UNITS ................................................................ 12 4. TEST TYPES AND RESULTS ............................................................................. 13 4.1 RADIATED EMISSION AND BANDEDGE MEASUREMENT.............................. 13 4.1.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT ........... 13 4.1.2 TEST INSTRUMENTS......................................................................................... 14 4.1.3 TEST PROCEDURES ......................................................................................... 15 4.1.4 DEVIATION FROM TEST STANDARD ............................................................... 15 4.1.5 TEST SETUP....................................................................................................... 16 4.1.6 EUT OPERATING CONDITIONS ........................................................................ 16 4.1.7 TEST RESULT..................................................................................................... 17 4.2 CONDUCTED EMISSION MEASUREMENT ...................................................... 30 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT.................................... 30 4.2.2 TEST INSTRUMENTS......................................................................................... 30 4.2.3 TEST PROCEDURES ......................................................................................... 31 4.2.4 DEVIATION FROM TEST STANDARD ............................................................... 31 4.2.5 TEST SETUP....................................................................................................... 32 4.2.6 EUT OPERATING CONDITIONS ........................................................................ 32 4.2.7 TEST RESULTS .................................................................................................. 33 4.3 6dB BANDWIDTH MEASUREMENT .................................................................. 35 4.3.1 LIMITS OF 6dB BANDWIDTH MEASUREMENT ................................................ 35 4.3.2 TEST SETUP....................................................................................................... 35 4.3.3 TEST INSTRUMENTS......................................................................................... 35 4.3.4 TEST PROCEDURE............................................................................................ 35 4.3.5 DEVIATION FROM TEST STANDARD ............................................................... 35 Report No.: RF111205C11 3 Report Format Version 4.1.0 4.3.6 EUT OPERATING CONDITIONS ........................................................................ 35 4.3.7 TEST RESULTS .................................................................................................. 36 4.4 CONDUCTED OUTPUT POWER ....................................................................... 37 4.4.1 LIMITS OF CONDUCTED OUTPUT POWER MEASUREMENT ........................ 37 4.4.2 TEST SETUP....................................................................................................... 37 4.4.3 TEST INSTRUMENTS......................................................................................... 37 4.4.4 TEST PROCEDURES ......................................................................................... 37 4.4.5 DEVIATION FROM TEST STANDARD ............................................................... 37 4.4.6 EUT OPERATING CONDITIONS ........................................................................ 37 4.4.7 TEST RESULTS .................................................................................................. 38 4.5 POWER SPECTRAL DENSITY MEASUREMENT.............................................. 39 4.5.1 LIMITS OF POWER SPECTRA…

Text truncated - open the document above for the full version.

1 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST 2 RADIATED EMISSION TEST