K7SF7C038WeMo Door & Window Sensor

The following paragraphs are required by the FCC and prove that this product meets all regulatory limits with regard to radio interference and radiation exposure. If you use this product as intended you will have no issues with either. FCC Statement DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY We, Belki n International, Inc., of 12045 E. Waterfront Drive, Playa Vista, CA 90094, declare under our sole responsibility that the product, F7C038, to which this declaration relates, compl ies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Federal Communications Commission Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential install ation. This equipment generates, uses, and can radiate radio frequency energy and, if not install ed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular install ation. If this equipment does cause harmful interference to radio or television reception, and on, the user is encouraged to try to correct the interference by one of the following measures: • Reorient or relocate the receiving antenna. • Increase the distance between the equipment and the receiver. from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifi cations not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. Th is transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Industry Canada Statement / Avis d’Industrie Canada This digital apparatus complies with CAN ICES-3(B). Cet appareil numérique conforme à la norme NMB-3(B) du Canada. This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme à la norme CNR-210 d’Industrie Canada applic able aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable. Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an u ncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. Déclaration d’exposition aux radiations: Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et util isé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. INFORMATION TO USER Use indoors and in dry location only AVIS AUX UTILISATEURS Pour u sage à l’intérieur et dans des endroits secs seulement. 8820fc021 37 Rev. A00 FrontBack GLOBAL PACKAGING SERVICES PR# FILE NAMEINS_F7C038f c_8820fc12345_RevA00_FCC_Insert SKU# F7C038 8820FC12345 REVISIONA00 Jluc DATE VERSION01

Welcome to WEMO®. Bienvenue à WEMO®. belkin.com/WeMo 8820fcDRAFT Rev. A00 Quick Install Guide Guide d’installation rapide For additional help and support, please go to www.belkin.com/support Pour plus de renseignements, rendez-vous à l’adresse suivante : www.belkin.com/support Door and Window sensor / Capteur pour porte et fenêtre Check WEMO® Link is up and running using your app. Vérifiez le fonctionnement de WEMO Link à l’aide de votre app. Launch the WEMO® App to complete setup. Lancez l’application WEMO pour terminer la configuration. 1 Place the batt eries in the sensor. The batt ery life is 1 year +. Installez les piles dans le capteur. La durée de vie des piles est supérieure à un an. 2 Check LED is flashing bef or e putting the cover back on. Vérifiez que la DEL clignote avant de refermer le couvercle. . 3 Enjoy To add more sensors, press “Add WEMO Link Devices” from the More or Options menu Pour ajouter des capteurs supplémentair es, appuyez sur « Ajouter des dispositifs WEMO Link » dans le menu Plus ou Options. Download and install the latest WEMO® app on your smart device. Téléchargez et installez la dernière ver sion de l’application WEMO®. sur votre appareil intelligent. 4 Or Ou In Settings, select Wi-Fi and connect t o the WEMO® Link network. Dans l’option Réglages, sélectionnez Wi-Fi et connectez-vous au réseau WEMO. Or Ou The sensor comes in two pieces: the piece with WEMO logo (tr ansmitter ) and smaller piece (magnet) When placing the two pieces of the sensor, find the notches on each and be sure the notches are facing each other within 3/4”. Where to place / Où installer le capteur: • a front door , any door or window on the ground floor / porte d’entrée , toute porte ou fenêtre au rez de chaussée • anything that opens and closes (e. g. medicine or gun cabinet, drawer, e tc...) / tout ce qui ouvre ou ferme (par exemple armoire de toilette, armoire d’armes à feu, tiroirs, etc...) Make sure each piece of the sensor is in the correc t location bef or e firmly securing with the tape. Assurez vous que le capteur est installé au bon endroit avant de le scotcher en position. Le capteur est composé de deux éléments: la partie avec le logo WEMO (émett eur) et l’ autre partie, plus petit e (aimant) Lor s du placement du capteur, v érifiez que les deux encoches sont en vis à vis, et que la distance entre les deux parties est inférieure à 17 mm 5 6 7 12 Pt. SBS 8 29 / 32 [226.420] 10 1 / 16 [255.592] GLOBAL PACKAGING SERVICES PR#xxxxx FILE NAMEQIG_8820fc11111_RevA00_Wemo DoorWindow Sensor_DRAFT SKU# F7C038fc 8820FC11111 REVISIONA00 JLuc DATEVERSION01 01/23/2015

Date:12/5/2014 Subject: Ad Hoc Mode Function Declaration FCC ID: K7SF7C038 To Whom it may concern, We, Belkin International, Inc. declare that the device does not support channel 12 ~ 13 in 2.4GHz band and any non-US channels in all the operational mode(s) for the following product. Regards, ( Signature Here) ------------------------------------------------------------------- Daniel Wesey / Manager, Global Engineering Services Belkin International, Inc. Tel No.:1-310-751-2816 Fax No.: 1-310-751-5912 E-mail: [email protected]

Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Date: 12/5/2014 Subject: Request for Confidentiality FCC ID: K7SF7C038 To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Theory of Operation Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachments until 2015/3/30. External Photos Internal Photos User Manual Test Setup photos It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards Sincerely yours, ------------------------------------------------------- Daniel Wesey /Manager, Global Engineering Services Belkin International, Inc. Tel No.:1-310-751-2816, Fax No.: 1-310-751-5912 E-mail: [email protected]

AUTHORIZATION LETTER Date: 12/5/2014 FCC ID: K7SF7C038 To whom it may concern: We, the undersigned, hereby authorize (name: Amanda Wu and Title: Senior Specialist) of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan) of Taiwan to act on our behalf in all manners relating to FCC application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by (name: Amanda Wu and Title: Senior Specialist) of BV CPS Taoyuan on our behalf shall have the same effect as acts of our own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Sincerely yours, Daniel Wesey / Manager, Global Engineering Services Belkin International, Inc. Tel No.:1-310-751-2816 Fax No.: 1-310-751-5912 E-mail: [email protected]

Report No.: 141008E01 Page 1 CONSTRUCTION PHOTOS OF EUT

APPLICATION NEXT ASSY USED ON REV APPROVED DATE REV MATERIAL: DRAWN SIZE DWG TITLE DWG NO. SCALESHEET REV APVD ENGR FINISH: THIRD ANGLE PROJECTION A4A4 UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS INTEGRAL DIMENSIONS 1 PLACE DECI MAL ARE IN mm AND TOLERANCES ARE: ANGULAR DIMENSIONS HOLES UNDER5.0 0ψ 0.5 ± ± ± 0.3 ± 2 0.2 SEE NOTES SEE NOTES A 1/1 1 OF 1 SANDY CHEN SANDY CHEN 05/05/14 05/05/14 05/05/14 KEVIN HUANG KEVIN HUANG 05/05/14A A RELEASE TO FILE DESCRIPTION REVISIONS PART NUMBER BLOCK PART NUMBER SHS1-L1 WNC PROPRIETARY LABEL, FCC LABEL,F7C038,6C,SHS1-L1 NOTES: 1. MATERIAL: a. GE LEXAN PC8B35 T= 175μ b. TO BE 3M 467 2. COLOR: a. BACKGROUD=BELKIN WHITE BASE COLOR b. PRINTING= Pantone 6 C 4.Outline and aperture Cut-Tooling +0.1 -0.15 mm 4L-SHS1L13-003 4L-SHS1L13-003 Pantone 6 C BELKIN WHITE BASE COLOR 23.17 63.75 1.05 1.24 R 2.60,4 PLS 15.5

Report No.: 141008E01 Page 1 CONSTRUCTION PHOTOS OF EUT Report No.: 141008E01 Page 2 Report No.: 141008E01 Page 3 Report No.: 141008E01 Page 4 Report No.: 141008E01 Page 5

Report No.: SA141008E01 1 of 6 Report Format Version 5.0.1 RF EXPOSURE REPORT REPORT NO.: SA141008E01 MODEL NO.: F7C038 FCC ID: K7SF7C038 RECEIVED: Oct. 08, 2014 TESTED: Nov. 03, 2014 ISSUED: Dec. 03, 2014 APPLICANT: Belkin, International Inc., ADDRESS: 12045 East Waterfront Drive Playa Vista, California 90094 United States ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS : No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (1): No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (2): No. 49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. This report should not be used by the client to claim product certification, approval, or endorsement by any government agencies. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification Report No.: SA141008E01 2 of 6 Report Format Version 5.0.1 TABLE OF CONTENTS RELEASE CONTROL RECORD ..................................................................................... 3 1. CERTIFICATION ...................................................................................................... 4 2. RF EXPOSURE LIMIT ............................................................................................. 5 3. MPE CALCULATION FORMULA ............................................................................. 5 4. CLASSIFICATION .................................................................................................... 5 5. ANTENNA GAIN ...................................................................................................... 5 6. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER .......................... 6 Report No.: SA141008E01 3 of 6 Report Format Version 5.0.1 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED SA141008E01 Original release Dec. 03, 2014 Report No.: SA141008E01 5 of 6 Report Format Version 5.0.1 2. RF EXPOSURE LIMIT LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) FREQUENCY RANGE (MHz) ELECTRIC FIELD STRENGTH (V/m) MAGNETIC FIELD STRENGTH (A/m) POWER DENSITY (mW/cm 2 ) AVERAGE TIME (minutes) LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE 300-1500 ... ... F/1500 30 1500-100,000 ... ... 1.0 30 F = Frequency in MHz 3. MPE CALCULATION FORMULA Pd = (Pout*G) / (4*pi*r 2 ) where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale pi = 3.1416 r = distance between observation point and center of the radiator in cm 4. CLASSIFICATION The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. 5. ANTENNA GAIN The antenna provided to the EUT, please refer to the following table: Brand Antenna Type Antenna Connector Gain(dBi) Frequency range (GHz) NA PIFA NA 2.22 2.4~2.4835 Report No.: SA141008E01 6 of 6 Report Format Version 5.0.1 6. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER For Zigbee FREQUENCY BAND (MHz) CONDUCTED POWER (mW) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/cm 2 ) LIMIT (mW/cm 2 ) 2405 - 2475 6.095 2.22 20 0.00202 1.00 --- END --- CONCLUSION: Both of the WLAN and Zigbee can transmit simultaneously, the formula of calculated the MPE is: CPD 1 / LPD 1 + CPD 2 / LPD 2 + ......etc. < 1 CPD = Calculation power density LPD = Limit of power density Therefore, the worst-case situation is 0.10417 / 1 + 0.00367 / 1= 0.108, which is less than “1”. This confirmed that the device comply with FCC 1.1310 MPE limit.

Report No.: RF141008E01 1 of 38 Report Format Version 5.2.1 FCC TEST REPORT REPORT NO.: RF141008E01 MODEL NO.: F7C038 FCC ID: K7SF7C038 RECEIVED: Oct. 08, 2014 TESTED: Oct. 15 to Nov. 03, 2014 ISSUED: Dec. 03, 2014 APPLICANT: Belkin, International Inc., ADDRESS: 12045 East Waterfront Drive Playa Vista, California 90094 United States ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS : No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (1): No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (2): No. 49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification Report No.: RF141008E01 2 of 38 Report Format Version 5.2.1 Table of Contents RELEASE CONTROL RECORD .......................................................................................... 4 1. CERTIFICATION ...................................................................................................... 5 2. SUMMARY OF TEST RESULTS .............................................................................. 6 2.1 MEASUREMENT UNCERTAINTY ........................................................................... 7 3. GENERAL INFORMATION ....................................................................................... 8 3.1 GENERAL DESCRIPTION OF EUT ......................................................................... 8 3.2 DESCRIPTION OF TEST MODES ........................................................................... 9 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ......................... 10 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS ........................................ 12 3.4 DUTY CYCLE OF TEST SIGNAL ........................................................................... 13 3.5 DESCRIPTION OF SUPPORT UNITS ................................................................... 14 3.6 CONFIGURATION OF SYSTEM UNDER TEST .................................................... 14 4. TEST TYPES AND RESULTS ................................................................................ 15 4.1 RADIATED EMISSION AND BANDEDGE MEASUREMENT ................................. 15 4.1.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT .............. 15 4.1.2 TEST INSTRUMENTS ........................................................................................... 16 4.1.3 TEST PROCEDURES ............................................................................................ 18 4.1.4 DEVIATION FROM TEST STANDARD .................................................................. 18 4.1.5 TEST SETUP ......................................................................................................... 19 4.1.6 EUT OPERATING CONDITIONS ........................................................................... 19 4.1.7 TEST RESULTS (MODE 1) .................................................................................... 20 4.1.8 TEST RESULTS (MODE 2) .................................................................................... 24 4.2 6DB BANDWIDTH MEASUREMENT ..................................................................... 27 4.2.1 LIMITS OF 6DB BANDWIDTH MEASUREMENT .................................................. 27 4.2.2 TEST INSTRUMENTS ........................................................................................... 27 4.2.3 TEST PROCEDURE .............................................................................................. 27 4.2.4 DEVIATION FROM TEST STANDARD .................................................................. 27 4.2.5 TEST SETUP ......................................................................................................... 27 4.2.6 EUT OPERATING CONDITIONS ........................................................................... 27 4.2.7 TEST RESULTS ..................................................................................................... 28 4.3 CONDUCTED OUTPUT POWER MEASUREMENT ............................................. 29 4.3.1 LIMITS OF CONDUCTED OUTPUT POWER MEASUREMENT ........................... 29 4.3.2 TEST INSTRUMENTS ........................................................................................... 29 4.3.3 TEST PROCEDURES ............................................................................................ 29 4.3.4 DEVIATION FROM TEST STANDARD ..........................................…

Text truncated - open the document above for the full version.

Report No.: 141008E01 Page 1 Reference No.: PHOTOGRAPHS OF THE TEST CONFIGURATION RADIATED EMISSION TEST (Below 1GHz) Report No.: 141008E01 Page 2 Reference No.: Report No.: 141008E01 Page 3 Reference No.: RADIATED EMISSION TEST (Above 1GHz) Report No.: 141008E01 Page 4 Reference No.: