K7SF7D4550V1Universal Wireless AV Adapter

Universal Wireless AV Adapter USER MANUAL 8820-00867 Rev. A00 F7D4550v1 Ok mk 7/27/11 TABLE OF CONTENTS Getting Started What’s in the Box How to Set It Up Where to Place Your Universal Wireless AV Adapter Getting to Know Your Universal Wireless AV Adapter Front Panel Back Panel Technical Details Technical Features System Requirements Using Your Universal Wireless AV Adapter Updating the Firmware via the Web Interface Resetting the Universal Wireless AV Adapter Restoring your Universal Wireless AV Adapter to Factory Defaults Troubleshooting, Support, and Warranty Troubleshooting Technical Support Belkin International, Inc., Limited 2-Year Product Warranty Regulatory Information FCC Statement Getting Started What’s in the Box Universal Wireless AV Adapter Ethernet Cable Power Supply Quick Installation Guide Belkin CD with User Manual How to Set It Up To get started, you will need: Wireless router, with its network name and password Personal Computer Web Browser 1) Connect your Adapter’s Ethernet cable to your PC’s Ethernet port. Plug the Adapter’s power supply into a wall outlet. 2) Open an Internet browser and type: http://belkin.universal into the address bar. A “Welcome screen” will appear to guide you through the Adapter setup. Browsers supported: Firefox® 3.5 and above, Internet Explorer® 6 and above, Google Chrome™ 7 and above, Safari® 4 and above Note: Default language is English. You may change languages by clicking on the language icon and choosing from the available options. a. Click the “Get Started” button to begin the setup process. b. Follow the directions on your browser to set up your device. 3) Once the Adapter has successfully joined the wireless network, disconnect it from the PC, and unplug the power supply. 4) Connect your Adapter’s Ethernet cable to your TV’s Ethernet port*. Plug the Adapter’s power supply into a wall outlet. *You can connect up to 4 Ethernet-enabled devices. Where to Place Your Universal Wireless AV Adapter For the best results, place the Universal Wireless AV Adapter (the Adapter) next to your TV or AV equipment in an open location away from large metal objects and magnets such as those found in speakers. Raising the Adapter above floor level can improve the strength of your wireless signal. Note: Once set up, the device needs to be restored to factory defaults (either via firmware GUI or via holding the reset button for 10 seconds, and then repeating the setup process). Getting to Know Your Universal Wireless AV Adapter Front Panel Modify the diagram to remove the line below “A” A) Universal Wireless AV Adapter Status Light Your Adapter’s status is shown by the light on the front. Off: The Adapter is not plugged into a power source. Blinking Blue: The Adapter is starting up. Blinking Blue/Amber: Indicates the Adapter needs to be set up. Solid Blue: The Adapter is connected to the Wi-Fi® network. Solid Amber: The Adapter is connected to the Wi-Fi network, but the signal is weak. You may experience performance problems. Consider moving the Adapter closer to the wireless router. Blinking Amber: The Adapter is not connected to the Wi-Fi network. Check to make sure that your wireless router is functioning properly, and/or move the Adapter closer to the wireless router. Back Panel Modify the diagram to • Remove the “dot” above USB port (C) • Remove connectors A, C and re-label A) Wired (LAN) Connectors Connect up to four AV devices such as Internet-Enabled TVs. Blu- ray™ players, gaming consoles, or other Ethernet-enabled devices to these ports using Ethernet cables. B) Reset Button This button is used to restart your Adapter in rare cases when it functions incorrectly. Resetting the Adapter will preserve your settings. This button may also be used to restore the factory default settings. Please see the “Troubleshooting” section for more information. C) Power Connector Connect the included power supply to this jack. Technical Details Technical Features Integrated 802.11n Wireless Bridge: Utilizes Dual-Band network technology (2.4GHz and 5GHz), allowing interference-free bandwidth to all your connected AV devices Integrated 4-Port 10/100 Switch Your Adapter has a built-in, 4-port network switch to connect your wired AV devices to the Internet. System Requirements Universal Wireless AV Adapter Wireless router At least one computer with an installed network interface adapter RJ45 Ethernet networking cable Internet browser Using your Universal Wireless AV Adapter Updating the Adapter’s Firmware via the Web Interface Note: Your PC needs to be wired to the Adapter in order to access the web interface. Open an Internet browser and type: http://belkin.universal into the address bar. The following steps show you how to update your Adapter’s firmware using its web interface. Resetting the Universal Wireless AV Adapter Restart your Adapter Reset Button The “Reset” button is used in rare cases when the Adapter may function improperly. Resetting the Adapter will restore the Adapter’s normal operation while maintaining the programmed settings. You can also restore the factory default settings by using the “Reset” button. Resetting the Universal Wireless AV Adapter Push and release the “Reset” button. The light on the Adapter will momentarily flash and then become solid again, indicating the reset is complete. Restoring Your Adapter to Factory Defaults Press and hold the “Reset” button for at least 10 seconds, and then release it. The light on the Adapter will become blue/amber in an alternating flash pattern indicating that the Adapter is ready to be set up again. Troubleshooting, Support, and Warranty Troubleshooting Belkin Setup cannot find my Universal Wireless AV Adapter. If Belkin Setup is not able to communicate with your Adapter during the installation process, please make sure that the wireless router is turned on and has Internet connectivity. The Adapter is having trouble connecting to my wireless network. Blinking Amber LED: This indicates that the Adapter …

Text truncated - open the document above for the full version.

B e l k i n I n t e r n a t i o n a l , I n c . 12045 East Waterfront Drive, Playa Vista, CA 90094 Date: 2011/8/31 G E N E R A L D E C L A R A T I O N We, Belkin International, Inc. declares that device does not have “Ad Hoc on non-US frequencies ” and/or “on DFS frequencies” while applying for the follow product. FCC ID: K7SF7D4550V1 If you have any questions regarding the authorization, please don’t hesitate to contact us. Thank you! -------------------------------------------------------------------------------------- Daniel Wesey / EMC Regulatory Compliance Engineer Belkin International, Inc. TEL: 1 (310) 751-2816 FAX: 1 (310) 751-5912 Email: [email protected]

Belkin International, Inc. 12045 East Waterfront Drive, Playa Vista, CA 90094 2011/8/31 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request FCC ID: K7SF7D4550V1 Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: Block Diagram Schematics Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely yours, ------------------------------------------------------------------------- Daniel Wesey / EMC Regulatory Compliance Engineer Belkin International, Inc. TEL: 1 (310) 751-2816 FAX: 1 (310) 751-5912 Email: [email protected]

Belkin International, Inc. 12045 East Waterfront Drive, Playa Vista, CA 90094 Power of Attorney 2011/8/31 To whom it may concern: We, the undersigned Belkin International, Inc. hereby authorize Bureau Veritas Consumer Product Service (Hong Kong) Limited, Taoyuan Branch of Taiwan to act on our behalf in all matters relating to all processes required in the FCC Part 15 approval and any communication needed with the national authority. Any and all acts carried out by Bureau Veritas Consumer Product Service (Hong Kong) Limited, Taoyuan Branch on our behalf shall have the same effects as acts of our own. This authorization is limited to the following products ： FCC ID: K7SF7D4550V1 If you have any questions regarding the authorization, please don’t hesitate to contact us. Thank you! Sincerely yours, ------------------------------------------------------------------------- Daniel Wesey / EMC Regulatory Compliance Engineer Belkin International, Inc. TEL: 1 (310) 751-2816 FAX: 1 (310) 751-5912 Email: [email protected]

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2

⁄›› ◊‹’ÈÕ⁄È‹ÏÎÎV1 ‘flfi¤‘ ‘—›flÃ◊—“ Ã∏ª ¥ø檥 ©∑¥¥ æª ∞ªÆ≥ø≤ª≤ ̈¥ß ø∫∫∑®ªº ø ̈ ø Ω±≤≠∞∑Ω ́± ́≠ ¥±Ωø ̈∑±≤ ±≤ ̈∏ª ºª™∑ΩªÚ ‘ø檥

88mm R2.5mm 32mm front of the product Elements within red boxes are to be printed in BLACK on pre-printed label at the factory. *** Please keep the printed element within the red boxes *** (factory batch# if needed) 13x13mm QR Code (*QR code shown is for place holder only. Exact contents to be specified by Belkin in a separate document.) SCALE 1:1 ALL TEXTS ARE: HELVETICA NEUE 65 MEDIUM DATE: 07/28/2011REVISION: A00 UNIVERSAL WIRELESS AV ADAPTER ID LABEL F7D4550 [US] DESIGNER: [YI] REVISION NOTES: A00: Initial Release DO NOT MAKE CHANGES WITHOUT PERMISSION FROM BELKIN IDG. IDA-000081 ALL DIMENSIONS IN [mm]. LABEL MATERIAL: Mylar with Matte PP finish ELEMENTS SHOWN IN GRAY: PANTONE 429C ELEMENTS SHOWN IN BLACK: BLACK INNOVATION DESIGN GROUP 88mm R2.5mm 32mm front of the product Elements within red boxes are to be printed in BLACK on pre-printed label at the factory. *** Please keep the printed element within the red boxes *** (factory batch# if needed) 13x13mm QR Code (*QR code shown is for place holder only. Exact contents to be specified by Belkin in a separate document.) SCALE 1:1 ALL TEXTS ARE: HELVETICA NEUE 65 MEDIUM DATE: 07/28/2011REVISION: A00 UNIVERSAL WIRELESS AV ADAPTER ID LABEL F7D4550 [US] DESIGNER: [YI] REVISION NOTES: A00: Initial Release DO NOT MAKE CHANGES WITHOUT PERMISSION FROM BELKIN IDG. IDA-000081 ALL DIMENSIONS IN [mm]. LABEL MATERIAL: Mylar with Matte PP finish ELEMENTS SHOWN IN GRAY: PANTONE 429C ELEMENTS SHOWN IN BLACK: BLACK INNOVATION DESIGN GROUP xxxxxxxxxxxxx xxx xxx Serial# xxxxxxxxxxxxxx V1000 xxxxxxxxxxxxx xxx xxx Serial# xxxxxxxxxxxxxx V1000 www.belkin.com Universal Wireless AV Adapter Model: F7D4550v1 FCC ID: K7SF7D4550V1 IC ID: 3623A-F7D4550V1 Complies with RSS-210 This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Designed in California Made in China 8830-07509 Rev. A00 8830-07509 To switch networks: 1. Hold reset button for 10 seconds 2. Connect to PC via Ethernet 3. Go to: http://Belkin.universal 88mm R2.5mm 32mm front of the product Elements within red boxes are to be printed in BLACK on pre-printed label at the factory. *** Please keep the printed element within the red boxes *** (factory batch# if needed) 13x13mm QR Code (*QR code shown is for place holder only. Exact contents to be specified by Belkin in a separate document.) SCALE 1:1 ALL TEXTS ARE: HELVETICA NEUE 65 MEDIUM DATE: 07/28/2011REVISION: A00 UNIVERSAL WIRELESS AV ADAPTER ID LABEL F7D4550 [US] DESIGNER: [YI] REVISION NOTES: A00: Initial Release DO NOT MAKE CHANGES WITHOUT PERMISSION FROM BELKIN IDG. IDA-000081 ALL DIMENSIONS IN [mm]. LABEL MATERIAL: Mylar with Matte PP finish ELEMENTS SHOWN IN GRAY: PANTONE 429C ELEMENTS SHOWN IN BLACK: BLACK INNOVATION DESIGN GROUP 88mm R2.5mm 32mm front of the product Elements within red boxes are to be printed in BLACK on pre-printed label at the factory. *** Please keep the printed element within the red boxes *** (factory batch# if needed) 13x13mm QR Code (*QR code shown is for place holder only. Exact contents to be specified by Belkin in a separate document.) SCALE 1:1 ALL TEXTS ARE: HELVETICA NEUE 65 MEDIUM DATE: 07/28/2011REVISION: A00 UNIVERSAL WIRELESS AV ADAPTER ID LABEL F7D4550 [US] DESIGNER: [YI] REVISION NOTES: A00: Initial Release DO NOT MAKE CHANGES WITHOUT PERMISSION FROM BELKIN IDG. IDA-000081 ALL DIMENSIONS IN [mm]. LABEL MATERIAL: Mylar with Matte PP finish ELEMENTS SHOWN IN GRAY: PANTONE 429C ELEMENTS SHOWN IN BLACK: BLACK INNOVATION DESIGN GROUP xxxxxxxxxxxxx xxx xxx Serial# xxxxxxxxxxxxxx V1000 xxxxxxxxxxxxx xxx xxx Serial# xxxxxxxxxxxxxx V1000 F7D4550 ANZ Universal Wireless AV Adapter www.belkin.com Designed in California Made in China 8830au07509 Rev. A00 8830au07509 Universal Wireless AV Adapter Model: F7D4550v1 To switch networks: 1. Hold reset button for 10 seconds 2. Connect to PC via Ethernet 3. Go to: http://Belkin.universal 88mm R2.5mm 32mm front of the product Elements within red boxes are to be printed in BLACK on pre-printed label at the factory. *** Please keep the printed element within the red boxes *** (factory batch# if needed) 13x13mm QR Code (*QR code shown is for place holder only. Exact contents to be specified by Belkin in a separate document.) SCALE 1:1 ALL TEXTS ARE: HELVETICA NEUE 65 MEDIUM DATE: 07/28/2011REVISION: A00 UNIVERSAL WIRELESS AV ADAPTER ID LABEL F7D4550 [US] DESIGNER: [YI] REVISION NOTES: A00: Initial Release DO NOT MAKE CHANGES WITHOUT PERMISSION FROM BELKIN IDG. IDA-000081 ALL DIMENSIONS IN [mm]. LABEL MATERIAL: Mylar with Matte PP finish ELEMENTS SHOWN IN GRAY: PANTONE 429C ELEMENTS SHOWN IN BLACK: BLACK INNOVATION DESIGN GROUP F7D4550 EMEA Smart TV Link 4 Port 88mm R2.5mm 32mm front of the product Elements within red boxes are to be printed in BLACK on pre-printed label at the factory. *** Please keep the printed element within the red boxes *** (factory batch# if needed) 13x13mm QR Code (*QR code shown is for place holder only. Exact contents to be specified by Belkin in a separate document.) SCALE 1:1 ALL TEXTS ARE: HELVETICA NEUE 65 MEDIUM DATE: 07/28/2011REVISION: A00 UNIVERSAL WIRELESS AV ADAPTER ID LABEL F7D4550 [US] DESIGNER: [YI] REVISION NOTES: A00: Initial Release DO NOT MAKE CHANGES WITHOUT PERMISSION FROM BELKIN IDG. IDA-000081 ALL DIMENSIONS IN [mm]. LABEL MATERIAL: Mylar with Matte PP finish ELEMENTS SHOWN IN GRAY: PANTONE 429C ELEMENTS SHOWN IN BLACK: BLACK INNOVATION DESIGN GROUP xxxxxxxxxxxxx xxx xxx Serial# xxxxxxxxxxxxxx V1000 xxxxxxxxxxxxx xxx xxx Serial# xxxxxxxxxxxxxx V1000 8830ea07509 www.belkin.com Smart TV Link 4 Port Model: F7D4550v1 Designed in California Made in China 8830ea07509 Rev. A00 To switch networks: 1. Hold reset button for 10 seconds 2. Connect to PC via Ethernet 3. Go to: http://Belkin.smarttv

Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Adapter: DSA-12PFE-12 BUS 120100 Page 9 Page 10 Adapter: MT12-Y120100-A1 Page 11

Report No.: SA110107E07H Report Format Version 4.0.0 Reference No.:110823E02 1 RF EXPOSURE REPORT REPORT NO.: SA110107E07H MODEL NO.: F7D4550v1 FCC ID: K7SF7D4550V1 ACCORDING: FCC Guidelines for Human Exposure IEEE C95.1 APPLICANT: Belkin International, Inc. ADDRESS: 12045 East Waterfront Drive, Playa Vista, CA 90094 ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS: No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan This test report consists of 6 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement. The test results in the report only apply to the tested sample. Report No.: SA110107E07H Report Format Version 4.0.0 Reference No.:110823E02 2 TABLE OF CONTENTS RELEASE CONTROL RECORD....................................................................................3 1. CERTIFICATION.......................................................................................................4 2. RF EXPOSURE LIMIT..............................................................................................5 3. MPE CALCULATION FORMULA..............................................................................5 4. CLASSIFICATION.....................................................................................................5 5. ANTENNA GAIN.......................................................................................................5 6. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER............................6 Report No.: SA110107E07H Report Format Version 4.0.0 Reference No.:110823E02 3 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED SA110107E01H Original release Aug. 29, 2011 Report No.: SA110107E07H Report Format Version 4.0.0 Reference No.:110823E02 4 1. CERTIFICATION PRODUCT: Universal Wireless AV Adapter BRAND NAME: Belkin MODEL NO.: F7D4550v1 TEST SAMPLE: R&D SAMPLE APPLICANT: Belkin International, Inc. STANDARDS: FCC Part 2 (Section 2.1091) FCC OET Bulletin 65, Supplement C (01-01) IEEE C95.1 The above equipment (Model: F7D4550v1) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE: Aug. 29, 2011 (Midoli Peng, Specialist ) APPROVED BY : , DATE: Aug. 29, 2011 (May Chen, Deputy Manager ) Report No.: SA110107E07H Report Format Version 4.0.0 Reference No.:110823E02 5 2. RF EXPOSURE LIMIT LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) FREQUENCY RANGE (MHz) ELECTRIC FIELD STRENGTH (V/m) MAGNETIC FIELD STRENGTH (A/m) POWER DENSITY (mW/cm 2 ) AVERAGE TIME (minutes) LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE 300-1500 ... ... F/1500 30 1500-100,000 ... ... 1.0 30 F = Frequency in MHz 3. MPE CALCULATION FORMULA Pd = (Pout*G) / (4*pi*r2) where Pd = power density in mW/cm2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 4. CLASSIFICATION The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. 5. ANTENNA GAIN There are two antennas provided to this EUT, please refer to the following table: Transmitter Circuit Antenna Type 2.4GHz Gain (dBi) 5 GHz Gain (dBi) Chain (0) PCB Printed 4.12 5.21 Chain (1) PCB Printed 4.44 4.21 The EUT incorporates CDD function with 802.11a, 802.11g. Report No.: SA110107E07H Report Format Version 4.0.0 Reference No.:110823E02 6 6. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER For 15.247(2.4GHz): FREQUENCY BAND (MHz) CONDUCTED POWER (dBm) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/ cm 2 ) LIMIT (mW/cm 2 ) 2412-2462 27.8 7.3 20 0.650 1.00 Directional gain = 10 log［(10 G1/20 + 10 G2/20 ) 2 / 2］ Effective Legacy Gain (dBi) = 7.3 The effective legacy gain is 7.3dBi, therefore the limit needs to reduce. For 15.247(5GHz): FREQUENCY BAND (MHz) CONDUCTED POWER (dBm) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/ cm 2 ) LIMIT (mW/cm 2 ) 5745-5825 25.8 7.7 20 0.442 1.00 Directional gain = Directional gain = 10 log［(10 G1/20 + 10 G2/20 ) 2 / 2］ Effective Legacy Gain (dBi) = 7.7 The effective legacy gain is 7.7dBi, therefore the limit needs to reduce. For 15.407(5GHz): FREQUENCY BAND (MHz) CONDUCTED POWER (dBm) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/ cm 2 ) LIMIT (mW/cm 2 ) 5180-5240 16.2 5.21 20 0.028 1.00 --- END ---

Report No.: RF110107E07H 1 Report Format Version 4.0.0 Reference No.:110823E02 FCC TEST REPORT (15.247) REPORT NO.: RF110107E07H MODEL NO.: F7D4550v1 FCC ID: K7SF7D4550V1 RECEIVED: Jan. 05, 2011 TESTED: Jan. 12 to Feb. 08, 2011 and May 19, 2011 ISSUED: Aug. 29, 2011 APPLICANT: Belkin International, Inc. ADDRESS: 12045 East Waterfront Drive, Playa Vista, CA 90094 ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS : No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan TEST LOCATION (1): No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan TEST LOCATION (2): No. 49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan This test report consists of 123 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by TAF or any government agencies. The test results in the report only apply to the tested sample. Report No.: RF110107E07H 2 Report Format Version 4.0.0 Reference No.:110823E02 Table of Contents RELEASE CONTROL RECORD..............................................................................5 1. CERTIFICATION...........................................................................................6 2. SUMMARY OF TEST RESULTS...................................................................7 2.1 MEASUREMENT UNCERTAINTY................................................................9 3. GENERAL INFORMATION.........................................................................10 3.1 GENERAL DESCRIPTION OF EUT............................................................10 3.2 DESCRIPTION OF TEST MODES..............................................................13 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL..............14 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS.............................18 3.4 DESCRIPTION OF SUPPORT UNITS........................................................19 3.5 CONFIGURATION OF SYSTEM UNDER TEST.........................................20 4. TEST TYPES AND RESULTS (802.11b & g, 2400 ~ 2483.5MHz Band).....21 4.1 CONDUCTED EMISSION MEASUREMENT..............................................21 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT............................21 4.1.2 TEST INSTRUMENTS................................................................................21 4.1.3 TEST PROCEDURES.................................................................................22 4.1.4 DEVIATION FROM TEST STANDARD.......................................................22 4.1.5 TEST SETUP..............................................................................................23 4.1.6 EUT OPERATING CONDITIONS................................................................23 4.1.7 TEST RESULTS (With adapter 1)...............................................................24 4.1.8 TEST RESULTS (With adapter 2)...............................................................26 4.2 RADIATED EMISSION MEASUREMENT...................................................28 4.2.1 LIMITS OF RADIATED EMISSION MEASUREMENT.................................28 4.2.2 TEST INSTRUMENTS................................................................................29 4.2.3 TEST PROCEDURES.................................................................................31 4.2.4 DEVIATION FROM TEST STANDARD.......................................................31 4.2.5 TEST SETUP..............................................................................................32 4.2.6 EUT OPERATING CONDITIONS................................................................32 4.2.7 TEST RESULTS..........................................................................................33 4.3 6dB BANDWIDTH MEASUREMENT..........................................................62 4.3.1 LIMITS OF 6dB BANDWIDTH MEASUREMENT........................................62 4.3.2 TEST INSTRUMENTS................................................................................62 4.3.3 TEST PROCEDURE...................................................................................62 4.3.4 DEVIATION FROM TEST STANDARD.......................................................62 4.3.5 TEST SETUP..............................................................................................62 4.3.6 EUT OPERATING CONDITIONS................................................................62 4.3.7 TEST RESULTS..........................................................................................63 Report No.: RF110107E07H 3 Report Format Version 4.0.0 Reference No.:110823E02 4.4 MAXIMUM PEAK OUTPUT POWER..........................................................67 4.4.1 LIMITS OF MAXIMUM PEAK OUTPUT POWER MEASUREMENT...........67 4.4.2 INSTRUMENTS..........................................................................................67 4.4.3 TEST PROCEDURES.................................................................................67 4.4.4 DEVIATION FROM TEST STANDARD.......................................................67 4.4.5 TEST SETUP..............................................................................................67 4.4.6 EUT OPERATING CONDITIONS................................................................67 4.4.7 TEST RESULTS..........................................................................................68 4.5 POWER SPECTRAL DENSITY MEASUREMENT......................................70 4.5.1 LIMITS OF POWER SPECTRAL DENSITY MEASUREMENT...................70 4.5.2 TEST INSTRUMENTS................................................................................70 4.5.3 TEST PROCEDURE....................…

Text truncated - open the document above for the full version.

Report No.: RF110107E07H-1 1 Report Format Version 4.0.0 Reference No.:110823E02 FCC TEST REPORT (15.407) REPORT NO.: RF110107E07H-1 MODEL NO.: F7D4550v1 FCC ID: K7SF7D4550V1 RECEIVED: Jan. 05, 2011 TESTED: Jan. 12 to Feb. 15, 2011 and May 19, 2011 ISSUED: Aug. 29, 2011 APPLICANT: Belkin International, Inc. ADDRESS: 12045 East Waterfront Drive, Playa Vista, CA 90094 ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS : No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan TEST LOCATION (1): No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan TEST LOCATION (2): No. 49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan This test report consists of 81 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by TAF or any government agencies. The test results in the report only apply to the tested sample. Report No.: RF110107E07H-1 2 Report Format Version 4.0.0 Reference No.:110823E02 Table of Contents RELEASE CONTROL RECORD........................................................................................4 1. CERTIFICATION....................................................................................................5 2. SUMMARY OF TEST RESULTS............................................................................6 2.1 MEASUREMENT UNCERTAINTY..........................................................................7 3. GENERAL INFORMATION.....................................................................................8 3.1 GENERAL DESCRIPTION OF EUT.......................................................................8 3.2 DESCRIPTION OF TEST MODES.......................................................................11 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL:.......................12 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS.......................................15 3.4 DESCRIPTION OF SUPPORT UNITS..................................................................16 3.5 CONFIGURATION OF SYSTEM UNDER TEST...................................................17 4. TEST TYPES AND RESULTS..............................................................................18 4.1 CONDUCTED EMISSION MEASUREMENT........................................................18 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT......................................18 4.1.2 TEST INSTRUMENTS..........................................................................................18 4.1.3 TEST PROCEDURES..........................................................................................19 4.1.4 DEVIATION FROM TEST STANDARD.................................................................19 4.1.5 TEST SETUP.......................................................................................................20 4.1.6 EUT OPERATING CONDITIONS.........................................................................20 4.1.7 TEST RESULTS (WITH ADAPTER 1)..................................................................21 4.1.8 TEST RESULTS (WITH ADAPTER 2)..................................................................23 4.2 RADIATED EMISSION MEASUREMENT.............................................................25 4.2.1 LIMITS OF RADIATED EMISSION MEASUREMENT...........................................25 4.2.2 LIMITS OF UNWANTED EMISSION OUT OF THE RESTRICTED BANDS..........26 4.2.3 TEST INSTRUMENTS..........................................................................................27 4.2.4 TEST PROCEDURES..........................................................................................29 4.2.5 DEVIATION FROM TEST STANDARD...........…

Text truncated - open the document above for the full version.