K7SF8J007WeMo Baby Monitor

Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Industry Canada statement: This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme à la norme CNR-210 d'Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable. Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Déclaration d'exposition aux radiations: Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.

Belkin International, Inc. 12045 East Waterfront Drive, Playa Vista, CA 90094 USA Declaration for no non-US channel operation September 24, 2012 We, Belkin International, Inc. declare that the device does not support any non-US channels in all the operational mode(s) for the following product. FCC ID: K7SF8J007 If you should have any question(s) regarding this declaration, please don’t hesitate to contact us. Thank you! ----------------------------------- Daniel Wesey / EMC Regulatory Compliance Engineer Belkin International, Inc. Tel: 310-604-2315 Fax: 310-898-1503 E-mail: [email protected]

Belkin International, Inc. 12045 East Waterfront Drive, Playa Vista, CA 90094 USA Date: 2012-09-24 FCC ID: K7SF8J007 To the attention of Federal Communications Commission Federal Communications CommissionFederal Communications Commission Federal Communications Commission Authorization and Evaluation Division Confidentiality Request Confidentiality RequestConfidentiality Request Confidentiality Request Pursuant to S ections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: Schematics SchematicsSchematics Schematics Block Diagram Block DiagramBlock Diagram Block Diagram The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely yours, ___________________________________ Daniel Wesey / EMC Regulatory Compliance Engineer Belkin International, Inc. Tel: 310-604-2315 Fax: 310-898-1503 E-mail: [email protected]

Belkin International, Inc. 12045 East Waterfront Drive, Playa Vista, CA 90094 USA Date: 2012-09-24 AUTHORIZATION LETTER To whom it may concern: We, the undersigned Belkin International, Inc. hereby authorize Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan) of Taiwan to act on our behalf in all matters relating to all processes required in FCC/ IC and any communication needed with the national authority. Any and all acts carried out by BV CPS Taoyuan on our behalf shall have the same effects as acts of our own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Thank you! Sincerely yours, ------------------------------------ Daniel Wesey / EMC Regulatory Compliance Engineer Belkin International, Inc. Tel: 310-604-2315 Fax: 310-898-1503 E-mail: [email protected]

Page 1 Page 2 Page 3

model: F8J007 made in China FCC ID: K7SF8J007 IC: 3623A-F8J007 WeMo Baby Restore Restore To Factory Settings: While plugging in power hold restore button for 5 seconds. See www.belkin.com for more details WeMo ID: WeMo_Baby.XXX Serial No: XXXXXXXXXXXXXX MAC: XXXXXXXXXXXXXX WeMo ID: WeMo_Baby.XXX Serial No: XXXXXXXXXXXXXX MAC: XXXXXXXXXXXXXX Restore WeMo Baby Restore To Factory Settings: While plugging in power hold restore button for 5 seconds. See www.belkin.com for more details model: F8J007 made in China FCC ID: K7SF8J007 IC: 3623A-F8J007 Roman 990-110-0076R WeMo_Baby.XXX

Page 1 Page 2 Page 3 Page 4 Page 5

FCC ID: K7SF8J007 Report No.: RF 120917C10 Operational Description This device is a WeMo Baby Monitor, which operates in 2.4GHz band; the maximum data rate could be up to 65Mbps which OFDM technique. If the signal to noise radio is too poor which could not support 65Mbps, the 11Mbps data rate with DSSS technique will be applied. The transmitter of the EUT is powered by 5Vdc power adapter. The antenna is Printed antenna without antenna connector. For more detailed instruction, please take a look at the user’s manual.

Report No.: SA120917C10 1 of 6 Report Format Version 5.0.0 RF EXPOSURE REPORT REPORT NO.: SA120917C10 MODEL NO.: F8J007 FCC ID: K7SF8J007 RECEIVED: Sep. 17, 2012 TESTED: Sep. 21 ~ Oct. 10, 2012 ISSUED: Oct. 15, 2012 APPLICANT: Belkin International, Inc. ADDRESS: 12045 East Waterfront Drive, Playa Vista, CA 90094 USA ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-com pliance to the specification. Report No.: SA120917C10 2 of 6 Report Format Version 5.0.0 TABLE OF CONTENTS RELEASE CONTROL RECORD ................................................................................................ 3 1. CERTIFICATION ............................................................................................................ 4 2. RF EXPOSURE .............................................................................................................. 5 2.1 LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) ........................................ 5 2.2 MPE CALCULATION FORMULA ................................................................................... 5 2.3 CLASSIFICATION .......................................................................................................... 5 2.4 CALCULATION RESULT OF MAXIMUM CONDUCTED POWER ................................. 6 Report No.: SA120917C10 3 of 6 Report Format Version 5.0.0 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED SA120917C10 Original release Oct. 15, 2012 Report No.: SA120917C10 4 of 6 Report Format Version 5.0.0 1. CERTIFICATION PRODUCT: WeMo Baby Monitor MODEL NO.: F8J007 BRAND: Belkin APPLICANT: Belkin International, Inc. TESTED: Sep. 21 ~ Oct. 10, 2012 TEST SAMPLE: PROTOTYPE STANDARDS: FCC Part 2 (Section 2.1091) FCC OET Bulletin 65, Supplement C (01-01) IEEE C95.1 The above equipment (model: F8J007) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE :Oct. 15, 2012 Jemma Yang / Specialist APPROVED BY : , DATE :Oct. 15, 2012 Ken Liu / Manager Report No.: SA120917C10 5 of 6 Report Format Version 5.0.0 2. RF EXPOSURE 2.1 LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) FREQUENCY RANGE (MHz) ELECTRIC FIELD STRENGTH (V/m) MAGNETIC FIELD STRENGTH (A/m) POWER DENSITY (mW/cm 2 ) AVERAGE TIME (minutes) LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE 300-1500 ... ... F/1500 30 1500-100,000 ... ... 1.0 30 F = Frequency in MHz 2.2 MPE calculation Formula Pd = (Pout*G) / (4*pi*r 2 ) where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 2.3 Classification The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. Report No.: SA120917C10 6 of 6 Report Format Version 5.0.0 2.4 Calculation result of maximum conducted power FREQUENCY BAND (MHz) MAX POWER (dBm) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/cm 2 ) LIMIT (W/m 2 ) 2412-2462 24.78 2.21 20 0.0995 10

Report No.: RF120917C10 1 of 48 Report Format Version 5.0.0 FCC TEST REPORT REPORT NO.: RF120917C10 MODEL NO.: F8J007 FCC ID: K7SF8J007 RECEIVED: Sep. 17, 2012 TESTED: Sep. 21 ~ Oct. 10, 2012 ISSUED: Oct. 11, 2012 APPLICANT: Belkin International, Inc. ADDRESS: 12045 East Waterfront Drive, Playa Vista, CA 90094 USA ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-com pliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF120917C10 2 of 48 Report Format Version 5.0.0 TABLE OF CONTENTS RELEASE CONTROL RECORD ................................................................................................................ 4 1. CERTIFICATION ............................................................................................................................ 5 2. SUMMARY OF TEST RESULTS ................................................................................................... 6 2.1 MEASUREMENT UNCERTAINTY ................................................................................................ 6 3. GENERAL INFORMATION ............................................................................................................ 7 3.1 GENERAL DESCRIPTION OF EUT .............................................................................................. 7 3.2 DESCRIPTION OF TEST MODES ................................................................................................ 8 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ................................................ 9 3.3 DESCRIPTION OF SUPPORT UNITS ........................................................................................ 11 3.3.1 CONFIGURATION OF SYSTEM UNDER TEST ......................................................................... 11 3.4 GENERAL DESCRIPTION OF APPLIED STANDARDS ............................................................. 12 4. TEST TYPES AND RESULTS ..................................................................................................... 13 4.1 RADIATED EMISSION AND BANDEDGE MEASUREMENT ..................................................... 13 4.1.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT ................................... 13 4.1.2 TEST INSTRUMENTS ................................................................................................................. 14 4.1.3 TEST PROCEDURES ................................................................................................................. 15 4.1.4 DEVIATION FROM TEST STANDARD ....................................................................................... 15 4.1.5 TEST SETUP ............................................................................................................................... 16 4.1.6 EUT OPERATING CONDITIONS ................................................................................................ 16 4.1.7 TEST RESULTS .......................................................................................................................... 17 4.2 CONDUCTED EMISSION MEASUREMENT .............................................................................. 30 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT ........................................................... 30 4.2.2 TEST INSTRUMENTS ................................................................................................................. 30 4.2.3 TEST PROCEDURES ................................................................................................................. 31 4.2.4 DEVIATION FROM TEST STANDARD ....................................................................................... 31 4.2.5 TEST SETUP ............................................................................................................................... 31 4.2.6 EUT OPERATING CONDITIONS ................................................................................................ 31 4.2.7 TEST RESULTS .......................................................................................................................... 32 4.3 6dB BANDWIDTH MEASUREMENT .......................................................................................... 34 4.3.1 LIMITS OF 6dB BANDWIDTH MEASUREMENT ........................................................................ 34 4.3.2 TEST SETUP .......................................................…

Text truncated - open the document above for the full version.

1 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST 2 RADIATED EMISSION TEST