K7SF9K1007V1N300 Wi-Fi Router

<NEW BELKIN LOGO> N300 Wi-Fi ROUTER USER MANUAL Model Name: N300 Wi-Fi Router Model Number: F9K1007V1 TABLE OF CONTENTS Getting Started What’s in the Box Initial Setup Manually Set Up Your Internet Connection Additional Capabilities Guest Access Content Filtering by Norton Getting to Know Your Router Technical Details Technical Features System Requirements Using Your Router Enabling Auto Update on Your Router Updating the Router’s Firmware via the Web Interface Resetting the Router Restoring your Router to Factory Default Troubleshooting, Support, and Warranty Troubleshooting Technical Support Belkin International, Inc., Limited 2-Year Product Warranty Regulatory Information FCC Statement Getting Started What’s in the Box N300 Wi-Fi Router Ethernet cable (attached to router) Power supply (attached to router) Network information card (attached to router) Quick Setup Guide Initial Setup Where to Place Your Router For the best results, place the Router next to your modem in an open location, away from large metal objects and magnets such as those found in speakers. Raising the Router above floor level can improve the strength of your wireless signal. How to Set It Up Connect Your N300 Router Turn off your modem by disconnecting its power supply. Some modems have a battery backup; this will need to be disconnected at this time as well. <please use image 1 from step 1 of the new welcome card p# 8820-01278 Rev A00> Connect your Router to your modem using the cable (already attached). <please use image 2 from step 1 of the new welcome card p# 8820-01278 Rev A00> Power up your modem by plugging in its power supply. If your modem has a battery backup, it can be reconnected at this time; you may need to hold the reset button for 10 seconds. Power up your Router by plugging in its power supply. <please use image 3 from step 1 of the new welcome card p# 8820-01278 Rev A00> Connect to Your Router The default network ID and password information for your Router can be found on the product label on the bottom of the Router. <please use image 1 from step 2 of the new welcome card p# 8820-01278 Rev A00> Use your computer, tablet, or smartphone to connect to the wireless network shown on the router product label. For information on how to connect your wireless devices, please see the “Connect Your Wireless Devices” section on page 20. When requested, please enter the password (security key) provided on the card. When your device has connected to the Router, use a browser to visit http://router/ . The router homepage will appear. If the page does not load, then try visiting http://192.168.2.1 to see the router homepage. Click the “Detect my connection” button in green. (If you would rather set up the Router manually, click the “set it up manually” link and proceed to page 10.) After several moments, your Router should automatically detect your Internet connection and restart. This can take anywhere from 30 seconds to 3 minutes depending on your connection type. If your Router is unable to establish an Internet connection on its own, you may be asked to restart your modem or provide a username and password if your connection requires one. Follow the on-screen instructions provided. Once your Router is online, it will determine if there is a firmware update available and offer to install it. Please allow up to 5 minutes for the firmware to update. If there are no updates available, then setup will proceed. At the next screen you will be invited to change your network name and password. Re-using your previous network name (SSID) and password makes connecting your existing devices to the new router much easier. If you decide to change these settings, then enter the new values and click “Save and Continue.” (Note: The password must be at least 8 characters long.) If you changed your network name and password, make note of it on the service card located on the foot of the Router. You will then have to connect to the new network. Please take this opportunity to register your Router. This will help technical support if there is a problem with your Router. Simply complete each of the required fields and click “Complete Registration.” If you don’t want to register right now, click “Register Later” to proceed. At the next screen you can download optional software that was bundled with your Router. This screen shows you optional software that is available for your Router, such as the Belkin Wi-Fi app used to access your router’s homepage quickly. If you wish to download and install this software program, simply click on the button appropriate for your device. When finished installing optional software, click “Thanks, take me to the dashboard.” Congratulations! You are now at your Router’s dashboard. Your Router is set up and ready to use. Using the WPS Button 1) Start WPS Push Button Connection (WPS PBC) on your computer or other Wi‐Fi device that you would like to connect wirelessly to your Router. Often there will be a button for this purpose in software that came with the device, or a physical “WPS,” “PBC,” or “Security” button on the device itself. 2) Within two minutes, press the WPS button on your Router and hold for two seconds. The WPS light (small light above WPS button) will blink blue while it listens for your Wi‐Fi device. Once a connection is established, the light will turn solid blue and then go out. If a connection is not established, the light will blink amber. You may repeat the process to try again. You can repeat this process for each WPS‐enabled device you’d like to add to your network. Manually Set Up Your Internet Connection Use a browser to visit http://router/. You can also try visiting http://192.168.2.1/. The Router’s Welcome page should appear. Click the “Set it up manually” link. Please select the type of connection your ISP provides. Refer to page 16 for a description of the connection types. <Image of SelectConnection screen> If the selected connection type requires additional information…

Text truncated - open the document above for the full version.

Page No. : 3 Confidential Letter Date: 2013/11/8 Federal Communications Commission Authorization and Evaluation Division FCC ID：K7SF9K1007V1 Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant Hereby requests confidential treatment of information accomparting this Application As outlined below: 1. Block Diagram 2. Circuit Diagram 3. Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application Sincerely, Applicant’s company name : Belkin International, Inc. Applicant’s company address : 12045 East Waterfront Drive, Playa Vista, CA 90094 Signature : Name and Job Title : Daniel Wesey / EMC Regulatory Compliance Engineer E-Mail : [email protected] Tel. : 1-310-751-2816

Page No. : 2 Power of Attorney Date: 2013/11/8 Dear Sir, I hereby have entrusted the following person to be a proxy regarding application for Type Certification. Sporton International Inc. Address : No.8, Lane 724, Bo-ai St., Jhubei City, HsinChu County 302, Taiwan, R.O.C. Name : Leo Huang Job Title : Manager e-mail : [email protected] I am therefore responsible for the contents of the application. Brand name and model type of the specified radio equipment: Belkin / F9K1007V1 FCC ID: K7SF9K1007V1 Product name: N300 Wi-Fi Router FCC Grantee contact person information. Applicant’s company name : Belkin International, Inc. Applicant’s company address : 12045 East Waterfront Drive, Playa Vista, CA 90094 Signature : Name and Job Title : Daniel Wesey / EMC Regulatory Compliance Engineer E-Mail : [email protected] Tel. : 1-310-751-2816

Report No.:3N0629 SPORTON International Inc. PAGE NUMBER : A1 OF A5 TEL : 886-3-327-3456 ISSUED DATE : Dec. 06, 2013 FAX : 886-3-327-0973 APPENDIX A. Photographs of EUT Report No.:3N0629 SPORTON International Inc. PAGE NUMBER : A2 OF A5 TEL : 886-3-327-3456 ISSUED DATE : Dec. 06, 2013 FAX : 886-3-327-0973 Report No.:3N0629 SPORTON International Inc. PAGE NUMBER : A3 OF A5 TEL : 886-3-327-3456 ISSUED DATE : Dec. 06, 2013 FAX : 886-3-327-0973 Adapter 1 Model No.: MT12-Y090100-A1 Report No.:3N0629 SPORTON International Inc. PAGE NUMBER : A4 OF A5 TEL : 886-3-327-3456 ISSUED DATE : Dec. 06, 2013 FAX : 886-3-327-0973 Adapter 2 Model No.: DSA-9PFB-09 FUS 090100 Report No.:3N0629 SPORTON International Inc. PAGE NUMBER : A5 OF A5 TEL : 886-3-327-3456 ISSUED DATE : Dec. 06, 2013 FAX : 886-3-327-0973

Report No.:3N0629 SPORTON International Inc. PAGE NUMBER : A1 OF A5 TEL : 886-3-327-3456 ISSUED DATE : Dec. 06, 2013 FAX : 886-3-327-0973 APPENDIX A. Photographs of EUT Report No.:3N0629 SPORTON International Inc. PAGE NUMBER : A2 OF A5 TEL : 886-3-327-3456 ISSUED DATE : Dec. 06, 2013 FAX : 886-3-327-0973 Report No.:3N0629 SPORTON International Inc. PAGE NUMBER : A3 OF A5 TEL : 886-3-327-3456 ISSUED DATE : Dec. 06, 2013 FAX : 886-3-327-0973 Report No.:3N0629 SPORTON International Inc. PAGE NUMBER : A4 OF A5 TEL : 886-3-327-3456 ISSUED DATE : Dec. 06, 2013 FAX : 886-3-327-0973 Report No.:3N0629 SPORTON International Inc. PAGE NUMBER : A5 OF A5 TEL : 886-3-327-3456 ISSUED DATE : Dec. 06, 2013 FAX : 886-3-327-0973

Report No.: FR3N0629 FCC ID: K7SF9K1007V1 Page No. : C1 of C3 Appendix C. Maximum Permissible Exposure Report No.: FR3N0629 FCC ID: K7SF9K1007V1 Page No. : C2 of C3 1. Maximum Permissible Exposure 1.1. Applicable Standard Systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy levels in excess limit for maximum permissible exposure. In accordance with 47 CFR FCC Part 2 Subpart J, section 2.1091 this device has been defined as a mobile device whereby a distance of 0.2 m normally can be maintained between the user and the device. (A) Limits for Occupational / Controlled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/ cm²) Averaging Time |E|²,|H|² or S (minutes) 0.3-3.0 614 1.63 (100)* 6 3.0-30 1842 / f 4.89 / f (900 / f)* 6 30-300 61.4 0.163 1.0 6 300-1500 F/300 6 1500-100,000 5 6 (B) Limits for General Population / Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/ cm²) Averaging Time |E|²,|H|² or S (minutes) 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f)* 30 30-300 27.5 0.073 0.2 30 300-1500 F/1500 30 1500-100,000 1.0 30 Note: f = frequency in MHz ; *Plane-wave equivalent power density 1.2. MPE Calculation Method E (V/m) ＝ d GP30 Power Density: Pd (W/m²) ＝ 377 2 E E ＝ Electric field (V/m) P ＝ Average RF output power (W) G ＝ EUT Antenna numeric gain (numeric) d ＝ Separation distance between radiator and human body (m) The formula can be changed to Pd ＝ 2 377 30 d GP   From the EUT RF output power, the minimum mobile separation distance, d=0.2m, as well as the gain of the used antenna, the RF power density can be obtained. Report No.: FR3N0629 FCC ID: K7SF9K1007V1 Page No. : C3 of C3 1.3. Calculated Result and Limit Antenna Type : Dipole Antenna Max Conducted Power for IEEE 802.11n MCS0 20MHz: 20.05 dBm Antenna Gain (dBi) Antenna Gain (numeric) Average Output Power (dBm) Average Output Power (mW) Power Density (S) (mW/cm²) Limit of Power Density (S) (mW/cm²) Test Result 2.52 1.7865 20.0503 101.1660 0.035974 1 Complies

SPORTON International Inc. No. 52, Hwa Ya 1st Rd., Hwa Ya Technology Park, Kwei-Shan Hsiang, Tao Yuan Hsien, Taiwan, R.O.C. Ph: 886-3-327-3456 / FAX: 886-3-327-0973 / www.sporton.com.tw Report Format Version: 01 FCC RADIO TEST REPORT Applicant’s company Belkin International, Inc. Applicant Address 12045 East Waterfront Drive, Playa Vista, CA 90094 FCC ID K7SF9K1007V1 Product Name N300 Wi-Fi Router Brand Name Belkin Model No. F9K1007V1 Test Rule 47 CFR FCC Part 15 Subpart C § 15.247 Test Freq. Range 2400 ~ 2483.5MHz Received Date Nov. 01, 2013 Final Test Date Nov. 18, 2013 Submission Type Original Equipment Statement Test result included in this report is for the IEEE 802.11n and IEEE 802.11b/g part of the product. The test result in this report refers exclusively to the presented test model / sample. Without written approval of SPORTON International Inc., the test report shall not be reproduced except in full. The measurements and test results shown in this test report were made in accordance with the procedures and found in compliance with the limit given in ANSI C63.10-2009, 47 CFR FCC Part 15 Subpart C, KDB 558074 D01 v03r01 and KDB 662911 D01 v02. The test equipment used to perform the test is calibrated and traceable to NML/ROC. Report No.: FR3N0629 Report Format Version: 01 Page No. : iof ii FCC ID: K7SF9K1007V1 Issued Date : Dec. 05, 2013 Table of Contents 1. CERTIFICATE OF COMPLIANCE ......................................................................................................................... 1 2. SUMMARY OF THE TEST RESULT .......................................................................................................................... 2 3. GENERAL INFORMATION .................................................................................................................................. 3 3.1. Product Details....................................................................................................................................................................................3 3.2. Accessories .........................................................................................................................................................................................4 3.3. Table for Filed Antenna.......................................................................................................................................................................5 3.4. Table for Carrier Frequencies .............................................................................................................................................................5 3.5. Table for Test Modes ...........................................................................................................................................................................6 3.6. Table for Testing Locations..................................................................................................................................................................7 3.7. Table for Supporting Units ...................................................................................................................................................................7 3.8. Table for Parameters of Test Software Setting .....................................................................................................................................8 3.9. EUT Operation during Test ...................................................................................................................................................................8 3.10. Duty Cycle ..........................................................................................................................................................................................9 3.11. Test Configurations ...........................................................................................................................................................................11 4. TEST RESULT ................................................................................................................................................... 14 4.1. AC Power Line Conducted Emissions Measurement.........................................................................................................................14 4.2. Maximum Conducted Output Power Measurement .........................................................................................................................22 4.3. Power Spectral Density Measurement ..............................................................................................................................................25 4.4. 6dB Spectrum Bandwidth Measurement ..........................................................................................................................................33 4.5. Radiated Emissions Measurement ....................................................................................................................................................39 4.6. Emissions Measurement ....................................................................................................................................................................63 4.7. Antenna Requirements .....................................................................................................................................................................85 5. LIST OF MEASURING EQUIPMENTS ................................................................................................................... 86 6. TEST LOCATION.............................................................................................................................................. 88 7. MEASUREMENT UNCERTAINTY.......................................................................................................................... 89 APPENDIX A. PHOTOGRAPHS OF EUT..........................…

Text truncated - open the document above for the full version.

Report No.: FR3N0629 FCC ID: K7SF9K1007V1 Page No. : B1 of B5 Appendix B. Test Photos Report No.: FR3N0629 FCC ID: K7SF9K1007V1 Page No. : B2 of B5 1. Photographs of Conducted Emissions Test Configuration Test Mode: Mode1 and Mode 2 FRONT VIEW REAR VIEW Report No.: FR3N0629 FCC ID: K7SF9K1007V1 Page No. : B3 of B5 2. Photographs of Radiated Emissions Test Configuration Test Configuration: 9kHz ~30MHz FRONT VIEW REAR VIEW Report No.: FR3N0629 FCC ID: K7SF9K1007V1 Page No. : B4 of B5 Test Configuration: 30MHz~1GHz / Test Mode: Mode1 and Mode 2 FRONT VIEW REAR VIEW Report No.: FR3N0629 FCC ID: K7SF9K1007V1 Page No. : B5 of B5 Test Configuration: Above 1GHz FRONT VIEW REAR VIEW