K7SF9K1106V1Dual-Band Wireless Range Extender

User Manual F9K1106v1 8820-00923 Rev. A01 Dual-BanD WIRElESS Range Extender Table Of COnTenTs Getting started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 What’s in the Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Initial Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Getting to Know Your Dual-band Wireless Range extender . . .5 Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Back Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Technical Details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 Technical Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 advanced settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 Resetting the Dual-ban d Wireless Range ex tender . . . . . . . . . .16 Troubleshooting, su pport, and Warranty . . . . . . . . . . . . . . . . . . .18 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 B elkin International, Inc ., Limited 2-Year Product Warranty . . . . . . . .21 Regulatory Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 FCC Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 1 GettinG Started Congratulations on buying a Dual-Band Wireless Range Extender (the Range Extender). This device will enable you to extend the range of your dual-band router to eliminate “dead spots” in your wireless network. Belkin’s MultiBeam technology gives enhanced coverage and performance to the areas of your house that need it. Lastly, the dual-band feature extends both your 2.4GHz and 5GHz networks. What’s in the Box Dual-Band Wireless Range Extender Installation Guide Power Supply Networking Cable User Manual on CD 2 GettinG Started Step 1: Connect the cable to the Ethernet port on your PC, and then plug in the power supply. Step 2: Open a browser, visit http://Belkin.range, and follow the onscreen instructions. Step 3: Once the Range Extender has successfully joined the wireless network, disconnect it from the PC, and unplug the power supply. http://Belkin.range| initial Setup To get started, you will need: • Your primary wireless router, i ts network name (SSID), and password. If it’s a dual-band router, please be sure you have both SSIDs and passwords. • A personal computer with a web browser 3 GettinG Started Step 5: Plug in the power supply.Step 4: Place the Range Extender in an area where you can still access your wireless network without problems, but close to the area where you want to establish your extended network. 4 GettinG Started Step 6: Join your new extended wireless network. 5 GettinG to Know Your Dual-BanD wireless ranGe extenDer a) st atus light Your Range Extender’s status is shown by the light on the front. Off: The Range Extender is not plugged into a power source. Blinking Blue: The Range Extender is starting up. so lid Blue: The Range Extender is connected to the Wi-Fi ® network. solid amber: The Range Extender is connected to the Wi-Fi network but is experiencing a weak signal. The weak signal may be either the 2.4GHz or 5GHz band. A weak signal may lead to performance problems. Consider moving the Range Extender closer to the wireless router. Front Panel Blinking amber: The Range Extender is not connected to the Wi-Fi network. Check to make sure that your wireless router is functioning properly, and/or move the Range Extender closer to the wireless router. alt ernating Blue/ am ber: The Range Extender is ready to be set up. (Refer to “Getting Started” for instructions on how to set up your Range Extender.) B) wi -Fi Protected se tup ( wPs) li ght and Button The WPS button on the front of your Range Extender can be used to help establish a secure connection between your Range Extender and other WPS-enabled Wi-Fi devices such as computers. To use the WPS feature on your Range Extender, see “Getting Started > Adding Computers to Your Network > Using the WPS Button.” The small light near the WPS button shows what is happening while you are using WPS to establish a connection. Off: Idle Blinking Blue: The Range Extender is listening for a WPS-enabled computer or other device. so lid Blue: The Range Extender has made a secure connection with the computer or other device. am ber: A connection was not created. 6 GettinG to Know Your Dual-BanD wireless ranGe extenDer Back Panel a) wi red (lan) Connectors Connect AV devices such as a TV, Blu-ray™ player, gaming console, and other wired devices to these ports using Ethernet cables. B) re set Button This button is used to restart your Range Extender in rare cases when it functions incorrectly. Resetting the Range Extender will preserve your settings. This button may also be used to restore the factory default settings. Please see the Troubleshooting section for more information. C) Power Connector Connect the included power supply to this jack. 7 Technical DeTails specifications Wireless Standards with Link Rate • IEEE 802.11n (up to 300Mbps for 2.4GHz and 5GHz*) • IEEE 8 02.11g ( up t o 5 4Mbps*) • IEEE 8 02.11a ( up t o 5 4Mbps*) • IEEE 8 02.11b ( up t o 1 1Mbps*) Wireless Operating Spectrum: • Simultaneous D ual-Band • 2.4GHz and 5GHz Wireless Se curity: • Wi-Fi P rotected S etup™ • 256-bit WPA ® /WPA2 ® en cryption • 64/128-bit WEP encryption VPN Su pport: • PPTP • IPSec pass-through Ports: • 4 L AN F ast E thernet p orts system Requirements • 802.11a/b/g/n 2.4GHz and/or 5GHz wireless router …

Text truncated - open the document above for the full version.

B e l k i n I n t e r n a t i o n a l , I n c . 12045 East Waterfront Drive, Playa Vista, CA 90094 Date: 2011/7/20 G E N E R A L D E C L A R A T I O N We, Belkin International, Inc. declares that device does not have “Ad Hoc on non-US frequencies ” and/or “on DFS frequencies” while applying for the follow product. FCC ID: K7SF9K1106V1 If you have any questions regarding the authorization, please don’t hesitate to contact us. Thank you! -------------------------------------------------------------------------------------- Daniel Wesey / EMC Regulatory Compliance Engineer Belkin International, Inc. TEL: 1 (310) 751-2816 FAX: 1 (310) 751-5912 Email: [email protected]

Belkin International, Inc. 12045 East Waterfront Drive, Playa Vista, CA 90094 2011/7/20 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request FCC ID: K7SF9K1106V1 Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: Block Diagram Schematics Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely yours, ------------------------------------------------------------------------- Daniel Wesey / EMC Regulatory Compliance Engineer Belkin International, Inc. TEL: 1 (310) 751-2816 FAX: 1 (310) 751-5912 Email: [email protected]

Belkin International, Inc. 12045 East Waterfront Drive, Playa Vista, CA 90094 Power of Attorney 2011/7/20 To whom it may concern: We, the undersigned Belkin International, Inc. hereby authorize Bureau Veritas Consumer Product Service (Hong Kong) Limited, Taoyuan Branch of Taiwan to act on our behalf in all matters relating to all processes required in the FCC Part 15 approval and any communication needed with the national authority. Any and all acts carried out by Bureau Veritas Consumer Product Service (Hong Kong) Limited, Taoyuan Branch on our behalf shall have the same effects as acts of our own. This authorization is limited to the following products ： FCC ID: K7SF9K1106V1 If you have any questions regarding the authorization, please don’t hesitate to contact us. Thank you! Sincerely yours, ------------------------------------------------------------------------- Daniel Wesey / EMC Regulatory Compliance Engineer Belkin International, Inc. TEL: 1 (310) 751-2816 FAX: 1 (310) 751-5912 Email: [email protected]

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2

FCC ID： ：： ：K7SF9K1106V1 LABEL LOCATION The label will be permanently affixed at a conspicuous location on the device. Label

Elements within red boxes are to be printed in BLACK on pre-printed label at the factory. *** Please keep the printed element within those red boxes *** belkin.XXXX XXXXXXXX Network Name (SSID): Password: XXXXXXXX WPA/WPA2 PIN code: Security Type: (factory batch# if needed) xxxxxxxxxxxxx xxx xxxSerial# xxxxxxxxxxxxxx V1000 xxxxxxxxxxxxx xxx xxxSerial# xxxxxxxxxxxxxx V1000 belkin.XXXX XXXXXXXX Network Name (SSID): Password: XXXXXXXX WPA/WPA2 PIN code: Security Type: 19x19mm QR Code (*QR code shown is for place holder only. Exact contents to be specified by Belkin in a separate document.) 88mm R2.5mm 32mm front of the product SCALE 1:1 ALL TEXTS ARE: HELVETICA NEUE 65 MEDIUM DATE: 08/19/2011REVISION: A01 DUAL-BAND WIRELESS RANGE EXTENDER ID LABEL GRAPHICS F9K1106 [US] DESIGNER: [YI] DO NOT MAKE CHANGES WITHOUT PERMISSION FROM BELKIN IDG. IDA-000084 ALL DIMENSIONS IN [mm]. LABEL MATERIAL: Mylar with Matte PP finish ELEMENTS SHOWN IN GRAY: PANTONE 429C ELEMENTS SHOWN IN BLACK: BLACK REVISION NOTES: A00: initial release A01: C-tick, CE! and GOST-R removed to separate US and EMEA/ANZ labels INNOVATION DESIGN GROUP

Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Adapter: DSA-12PFE-12 BUS 120100 Page 9 Page 10 Adapter: MT12-Y120100-A1 Page 11

Report No.: SA110107E07G R1 Report Format Version 4.0.0 Reference No.:110719E01 Cancels and replaces the report No.: SA110107E07G dated July 25, 2011 1 RF EXPOSURE REPORT REPORT NO.: SA110107E07G R1 MODEL NO.: F9K1106v1 FCC ID: K7SF9K1106V1 APPLICANT: Belkin International, Inc. ADDRESS: 12045 East Waterfront Drive, Playa Vista, CA 90094 ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS: No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan This test report consists of 6 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by any government agency. The test results in the report only apply to the tested sample. Report No.: SA110107E07G R1 Report Format Version 4.0.0 Reference No.:110719E01 Cancels and replaces the report No.: SA110107E07G dated July 25, 2011 2 TABLE OF CONTENTS RELEASE CONTROL RECORD...................................................................................3 1. CERTIFICATION....................................................................................................4 2. RF EXPOSURE LIMIT............................................................................................5 3. MPE CALCULATION FORMULA...........................................................................5 4. CLASSIFICATION..................................................................................................5 5. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER.........................6 Report No.: SA110107E07G R1 Report Format Version 4.0.0 Reference No.:110719E01 Cancels and replaces the report No.: SA110107E07G dated July 25, 2011 3 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED SA110107E07G Original release July 25, 2011 SA110107E07G R1 Modify the model name July 29, 2011 Report No.: SA110107E07G R1 Report Format Version 4.0.0 Reference No.:110719E01 Cancels and replaces the report No.: SA110107E07G dated July 25, 2011 4 1. CERTIFICATION PRODUCT: Dual-Band Wireless Range Extender MODEL NO.: F9K1106v1 BRAND: Belkin APPLICANT: Belkin International, Inc. TEST SAMPLE: R&D SAMPLE STANDARD: FCC Part 2 (Section 2.1091) FCC OET Bulletin 65, Supplement C (01-01) IEEE C95.1 The above equipment (model: F9K1106v1) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE: July 29, 2011 ( Claire Kuan, Specialist ) APPROVED BY : , DATE: July 29, 2011 (May Chen, Deputy Manager ) Report No.: SA110107E07G R1 Report Format Version 4.0.0 Reference No.:110719E01 Cancels and replaces the report No.: SA110107E07G dated July 25, 2011 5 2. RF EXPOSURE LIMIT LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) FREQUENCY RANGE (MHz) ELECTRIC FIELD STRENGTH (V/m) MAGNETIC FIELD STRENGTH (A/m) POWER DENSITY (mW/cm 2 ) AVERAGE TIME (minutes) LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE 300-1500 ... ... F/1500 30 1500-100,000 ... ... 1.0 30 F = Frequency in MHz 3. MPE CALCULATION FORMULA Pd = (Pout*G) / (4*pi*r2) where Pd = power density in mW/cm2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 4. CLASSIFICATION The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. Report No.: SA110107E07G R1 Report Format Version 4.0.0 Reference No.:110719E01 Cancels and replaces the report No.: SA110107E07G dated July 25, 2011 6 5. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER For 15.247(2.4GHz): FREQUENCY BAND (MHz) CONDUCTED POWER (dBm) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/ cm 2 ) LIMIT (mW/cm 2 ) 2412-2462 27.8 7.3 20 0.650 1.00 For 15.247(5GHz): FREQUENCY BAND (MHz) CONDUCTED POWER (dBm) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/ cm 2 ) LIMIT (mW/cm 2 ) 5745-5825 25.8 7.7 20 0.442 1.00 For 15.407(5GHz): FREQUENCY BAND (MHz) CONDUCTED POWER (dBm) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/ cm 2 ) LIMIT (mW/cm 2 ) 5180-5240 16.2 5.21 20 0.028 1.00 --- END ---

Report No.: RF110107E07G R2 1 Report Format Version 4.0.0 Reference No.:110719E01 Cancels and replaces the report No.: RF110107E07G R1 dated July 29, 2011 FCC TEST REPORT (15.247) REPORT NO.: RF110107E07G R2 MODEL NO.: F9K1106v1 FCC ID: K7SF9K1106V1 RECEIVED: Jan. 05, 2011 TESTED: Jan. 12 to Feb. 08, 2011 and May 19, 2011 ISSUED: Aug. 19, 2011 APPLICANT: Belkin International, Inc. ADDRESS: 12045 East Waterfront Drive, Playa Vista, CA 90094 ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS : No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan TEST LOCATION (1): No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan TEST LOCATION (2): No. 49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan This test report consists of 123 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by TAF or any government agencies. The test results in the report only apply to the tested sample. Report No.: RF110107E07G R2 2 Report Format Version 4.0.0 Reference No.:110719E01 Cancels and replaces the report No.: RF110107E07G R1 dated July 29, 2011 Table of Contents RELEASE CONTROL RECORD..............................................................................5 1. CERTIFICATION...........................................................................................6 2. SUMMARY OF TEST RESULTS...................................................................7 2.1 MEASUREMENT UNCERTAINTY................................................................9 3. GENERAL INFORMATION.........................................................................10 3.1 GENERAL DESCRIPTION OF EUT............................................................10 3.2 DESCRIPTION OF TEST MODES..............................................................13 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL..............14 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS.............................18 3.4 DESCRIPTION OF SUPPORT UNITS........................................................19 3.5 CONFIGURATION OF SYSTEM UNDER TEST.........................................20 4. TEST TYPES AND RESULTS (802.11b & g, 2400 ~ 2483.5MHz Band).....21 4.1 CONDUCTED EMISSION MEASUREMENT..............................................21 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT............................21 4.1.2 TEST INSTRUMENTS................................................................................21 4.1.3 TEST PROCEDURES.................................................................................22 4.1.4 DEVIATION FROM TEST STANDARD.......................................................22 4.1.5 TEST SETUP..............................................................................................23 4.1.6 EUT OPERATING CONDITIONS................................................................23 4.1.7 TEST RESULTS (With adapter 1)...............................................................24 4.1.8 TEST RESULTS (With adapter 2)...............................................................26 4.2 RADIATED EMISSION MEASUREMENT...................................................28 4.2.1 LIMITS OF RADIATED EMISSION MEASUREMENT.................................28 4.2.2 TEST INSTRUMENTS................................................................................29 4.2.3 TEST PROCEDURES.................................................................................31 4.2.4 DEVIATION FROM TEST STANDARD.......................................................31 4.2.5 TEST SETUP..............................................................................................32 4.2.6 EUT OPERATING CONDITIONS................................................................32 4.2.7 TEST RESULTS..........................................................................................33 4.3 6dB BANDWIDTH MEASUREMENT..........................................................62 4.3.1 LIMITS OF 6dB BANDWIDTH MEASUREMENT........................................62 4.3.2 TEST INSTRUMENTS................................................................................62 4.3.3 TEST PROCEDURE...................................................................................62 4.3.4 DEVIATION FROM TEST STANDARD.......................................................62 4.3.5 TEST SETUP..............................................................................................62 4.3.6 EUT OPERATING CONDITIONS................................................................62 4.3.7 TEST RESULTS..........................................................................................63 Report No.: RF110107E07G R2 3 Report Format Version 4.0.0 Reference No.:110719E01 Cancels and replaces the report No.: RF110107E07G R1 dated July 29, 2011 4.4 MAXIMUM PEAK OUTPUT POWER..........................................................67 4.4.1 LIMITS OF MAXIMUM PEAK OUTPUT POWER MEASUREMENT...........67 4.4.2 INSTRUMENTS..........................................................................................67 4.4.3 TEST PROCEDURES.................................................................................67 4.4.4 DEVIATION FROM TEST STANDARD.......................................................67 4.4.5 TEST SETUP..............................................................................................67 4.4.6 EUT OPERATING CONDITIONS................................................................67 4.4.7 TEST RESULTS..........................................................................................68 4.5 POWER SPECTRAL DENSITY MEASUREMENT...........................…

Text truncated - open the document above for the full version.

Report No.: RF110107E07G-1 R2 1 Report Format Version 4.0.0 Reference No.:110719E01 Cancels and replaces the report No.: RF110107E07G-1 R1 dated July 29, 2011 FCC TEST REPORT (15.407) REPORT NO.: RF110107E07G-1 R2 MODEL NO.: F9K1106v1 FCC ID: K7SF9K1106V1 RECEIVED: Jan. 05, 2011 TESTED: Jan. 12 to Feb. 15, 2011 and May 19, 2011 ISSUED: Aug. 19, 2011 APPLICANT: Belkin International, Inc. ADDRESS: 12045 East Waterfront Drive, Playa Vista, CA 90094 ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS : No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan TEST LOCATION (1): No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan TEST LOCATION (2): No. 49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan This test report consists of 81 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by TAF or any government agencies. The test results in the report only apply to the tested sample. Report No.: RF110107E07G-1 R2 2 Report Format Version 4.0.0 Reference No.:110719E01 Cancels and replaces the report No.: RF110107E07G-1 R1 dated July 29, 2011 Table of Contents RELEASE CONTROL RECORD........................................................................................4 1. CERTIFICATION....................................................................................................5 2. SUMMARY OF TEST RESULTS............................................................................6 2.1 MEASUREMENT UNCERTAINTY..........................................................................7 3. GENERAL INFORMATION.....................................................................................8 3.1 GENERAL DESCRIPTION OF EUT.......................................................................8 3.2 DESCRIPTION OF TEST MODES.......................................................................11 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL:.......................12 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS.......................................15 3.4 DESCRIPTION OF SUPPORT UNITS..................................................................16 3.5 CONFIGURATION OF SYSTEM UNDER TEST...................................................17 4. TEST TYPES AND RESULTS..............................................................................18 4.1 CONDUCTED EMISSION MEASUREMENT........................................................18 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT......................................18 4.1.2 TEST INSTRUMENTS..........................................................................................18 4.1.3 TEST PROCEDURES..........................................................................................19 4.1.4 DEVIATION FROM TEST STANDARD.................................................................19 4.1.5 TEST SETUP.......................................................................................................20 4.1.6 EUT OPERATING CONDITIONS.........................................................................20 4.1.7 TEST RESULTS (WITH ADAPTER 1)..................................................................21 4.1.8 TEST RESULTS (WITH ADAPTER 2)..................................................................23 4.2 RADIATED EMISSION MEASUREMENT.............................................................25 4.2.1 LIMITS OF RADIATED EMISSION MEASUREMENT...........................................25 4.2.2 LIMITS OF UNWANTED EMISSION OUT OF THE RESTRICTED BANDS..........26 4.2.3 TEST INSTRUMENTS..........................................................................................27 4.2.4 TEST PROCEDURES..........................................................................................29 4.2.5 DEVIATION FROM TEST STANDARD.................................................................29 4.2.6 TEST SETUP.......................................................................................................30 4.2.7 EUT OPERATING CONDITION............................................................................30 4.2.8 TEST RESULTS...................................................................................................31 4.3 PEAK TRANSMIT POWER MEASUREMENT......................................................52 4.3.1 LIMITS OF PEAK TRANSMIT POWER MEASUREMENT....................................52 4.3.2 TEST INSTRUMENTS..........................................................................................52 4.3.3 TEST PROCEDURE.............................................................................................53 4.3.4 DEVIATION FROM TEST STANDARD.................................................................53 4.3.5 TEST SETUP.......................................................................................................53 4.3.6 EUT OPERATING CONDITIONS.........................................................................53 4.3.7 TEST RESULTS...................................................................................................54 4.4 PEAK POWER EXCURSION MEASUREMENT...................................................60 4.4.1 LIMITS OF PEAK POWER EXCURSION MEASUREMENT.................................60 Report No.: RF110107E07G-1 R2 3 Report Format Version 4.0.0 Reference No.:110719E01 Cancels and replaces the report No.: RF110107E07G-1 R1 dated July 29, 2011 4.4.2 TEST INSTRUMENTS..........................................................................................60 4.4.3 TEST PROCEDURE.............................................................................................60 4.…

Text truncated - open the document above for the full version.