K7SF9K1106V2Dual-Band Wireless Range Extender

1 Dual-Band Wireless Range Extender USER MANUAL 8820-01371 Rev. A02 F9K1106v2 Ok JL 10/20/14 TABLE OF CONTENTS Getting Started What’s in the Box Initial Setup Getting to Know Your Dual-Band Wi-Fi Range Extender Front Panel Back Panel Technical Details Technical Features System Requirements Advanced Settings Resetting the Dual-Band Wi-Fi Range Extender Troubleshooting, Support, and Warranty Troubleshooting Technical Support Belkin International, Inc., Limited 2-Year Product Warranty Regulatory Information FCC Statement IC Statement 2 Getting Started Congratulations on buying an Dual-Band Wireless Range Extender (the Range Extender). This device will enable you to extend the range of your dual-band router to eliminate “dead spots” in your wireless network. The dual-band feature extends both your 2.4GHz and 5GHz networks. What’s in the Box Dual-Band Wireless Range Extender Quick Installation Guide User Manual on CD Initial Setup To get started, you will need:  Your primary wireless router, its network name (SSID), and password. If it’s a dual-band router, please be sure you have both SSIDs and passwords. A personal computer with a web browser Set Up Your Range Extender Wirelessly [please derive lineart from QIG: 8820-xxxxx A00] (JL, 1. Need to apply a new part number for N600 WRX QIG. 2. Then modify N300 WRX QIG 8820-01078 wording as N600 WRX. 3. If necessary, modify the N300 WRX figure with longer antenna. Step 1 Choose an outlet near the edge of your network’s Wi-Fi coverage. Step 2 Plug in your N600 DB Range Extender. Step 3 Connect your computer to the “Belkin.setup” wireless network. Make sure nothing is plugged into your Ethernet port. On Windows Vista or Windows 7, please check the option “Connect Automatically” when you select the network. Step 4 3 Visit “http://Belkin.range” and follow the on-screen instructions. Wired Setup Step 1: Connect the Range Extender to your computer using an Ethernet cable (Ethernet cable not included). Step 2: Plug the Range Extender into a wall socket or other power source. Step 3: On your computer, turn off Wi-Fi. Step 4: Use your favorite browser to visit http://Belkin.range and follow the instructions that appear there. Step 5: After your setup is complete, please turn on Wi-Fi. How to reset the Range Extender and get it connected if you change your router’s network name or password: 1. Locate the Range Extender’s reset button on the base of the unit. 2. With the unit still powered on, press and hold the Range Extender’s reset button for 10 seconds. 3. Connect your computer to the “Belkin.setup” wireless network. Make sure nothing is plugged into your Ethernet port. 4. In your Internet browser, open the address “http://Belkin.range” and follow the on-screen instructions. Getting to Know Your Dual-Band Wi-Fi Range Extender (JL, Need to change this photo to N600 WRX with longer antenna) A) Status Light Your Range Extender’s status is shown by the light on the front. Off The Range Extender is not plugged into a power source. Blinking Blue The Range Extender is starting up. Solid Blue The Range Extender is connected to the Wi-Fi® network. Solid Amber The Range Extender is connected to the Wi-Fi network but is experiencing a weak signal. The weak signal may be either the 2.4GHz or 5GHz band. A weak signal may lead to performance problems. Consider moving the Range Extender closer to the wireless router. modify the line ar Modify the line art 4 Blinking Amber The Range Extender is not connected to the Wi-Fi network. Check to make sure that your wireless router is functioning properly, and/or move the Range Extender closer to the wireless router. Alternating Blue/Amber The Range Extender is ready to be set up. (Refer to “Getting Started” for instructions on how to set up your Range Extender.) B) Wi-Fi Protected Setup (WPS) Light and Button The WPS button on the top of your Range Extender can be used to help establish a secure connection between your Range Extender and other WPS-enabled Wi-Fi devices such as computers. To use the WPS feature on your Range Extender, see “Advanced Settings > Wi-Fi Protected Setup > Using Wi-Fi Protected Setup.” The small LED light near the WPS button shows what is happening while you are using WPS to establish a connection. Off: Idle Blinking Blue: The Range Extender is listening for a WPS-enabled computer or other device. Solid Blue: The Range Extender has made a secure connection with the computer or other device. Blinking Amber: A connection was not created. A) Wired (LAN) Connector Connect AV devices such as a TV, Blu-ray player, gaming console, and other wired devices to the port using an Ethernet cable (not included). B) Reset Button This button is used to restart your Range Extender in rare cases when it functions incorrectly. Resetting the Range Extender will preserve your settings. This button may also be used to restore the factory default settings. Please see the Troubleshooting section for more information. 5 Technical Details System Requirements:  802.11a/b/g/n 2.4GHz and/or 5GHz wireless router with broadband Internet connection  At least one computer with: Installed wireless network interface card and TCP/IP protocol Windows® XP 32 (SP3 or greater), Windows Vista® 32/64, or Windows 7 32/64; or Mac OS® X v10.5 or above Internet Explorer® v7 or above, Firefox®, Google Chrome™, or Safari® Minimum 1.8GHz processor Minimum 512MB RAM Specifications: Wireless Standards with Link Rate o IEEE 802.11n (up to 300Mbps for 2.4GHz and 5GHz*) o IEEE 802.11g (up to 54Mbps*) o IEEE 802.11a (up to 54Mbps*) o IEEE 802.11b (up to 11Mbps*) Wireless Operating Spectrum: o Simultaneous Dual-Band o 2.4GHz and 5GHz Wireless Security: o Wi-Fi Protected Setup™ o 256-bit WPA®/WPA2® encryption o 64/128-bit WEP encryption Ports: o 1 LAN Fast Ethernet port Advanced Settings Connecting to the Web Interface When you are connected to your Range Extender, you can access the Range Extender’s Web-Based Advanced User Interface (UI) us…

Text truncated - open the document above for the full version.

Confidential Letter Date: 2014/9/26 Federal Communications Commission Authorization and Evaluation Division FCC ID：K7SF9K1106V2 Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant Hereby requests confidential treatment of information accomparting this Application As outlined below: 1. Block Diagram 2. Circuit Diagram 3. Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application Sincerely, Applicant’s company name : Belkin International, Inc. Applicant’s company address : 12045 East Waterfront Drive, Playa Vista, CA 90094 United States Signature : Name and Job Title : Daniel Wesey / EMC Regulatory Compliance Engineer E-Mail : [email protected] Tel. : 310-751-2816

DoC Attestation Letter Date: 2014/10/17 We Belkin International, Inc., as the grantee of this project (FCC ID: K7SF9K1106V2 / Brand Name: belkin / Model No.: F9K1106v2), would like to declare that the composite portion categorized as computer peripheral has been authorized under the Declaration of Conformity procedures (Sporton report No.: FD482967, FCC Test F irm Registration No.: 187376). The final product shall consequently comply with the FCC rule applied for DoC Procedure. Regards, FCC Grantee contact person information. Applicant’s company name : Belkin International, Inc. Applicant’s company address : 12045 East Waterfront Drive, Playa Vista, CA 90094 United States Signature : Name and Job Title : Daniel Wesey / EMC Regulatory Compliance Engineer E-Mail : [email protected] Tel. : 310-751-2816

Power of Attorney Date: 2014/10/17 Dear Sir, I hereby have entrusted the following person to be a proxy regarding application for Type Certification. Sporton International Inc. Address : No.8, Lane 724, Bo-ai St., Jhubei City, HsinChu County 302, Taiwan, R.O.C. Name : Leo Huang Job Title : Manager e-mail : [email protected] I am therefore responsible for the contents of the application. Brand name and model type of the specified radio equipment: belkin / F9K1106v2 FCC ID: K7SF9K1106V2 Product name: Dual-Band Wireless Range Extender FCC Grantee contact person information. Applicant’s company name : Belkin International, Inc. Applicant’s company address : 12045 East Waterfront Drive, Playa Vista, CA 90094 United States Signature : Name and Job Title : Daniel Wesey / EMC Regulatory Compliance Engineer E-Mail : [email protected] Tel. : 310-751-2816

Report No.:482967 SPORTON International Inc. PAGE NUMBER : A1 OF A4 TEL : 886-3-327-3456 FAX : 886-3-327-0973 APPENDIX A. Photographs of EUT Report No.:482967 SPORTON International Inc. PAGE NUMBER : A2 OF A4 TEL : 886-3-327-3456 FAX : 886-3-327-0973 Report No.:482967 SPORTON International Inc. PAGE NUMBER : A3 OF A4 TEL : 886-3-327-3456 FAX : 886-3-327-0973 Adapter Report No.:482967 SPORTON International Inc. PAGE NUMBER : A4 OF A4 TEL : 886-3-327-3456 FAX : 886-3-327-0973

Label: Label Here

Report No.:482967 SPORTON International Inc. PAGE NUMBER : A1 OF A7 TEL : 886-3-327-3456 FAX : 886-3-327-0973 APPENDIX A. Photographs of EUT Report No.:482967 SPORTON International Inc. PAGE NUMBER : A2 OF A7 TEL : 886-3-327-3456 FAX : 886-3-327-0973 Report No.:482967 SPORTON International Inc. PAGE NUMBER : A3 OF A7 TEL : 886-3-327-3456 FAX : 886-3-327-0973 Report No.:482967 SPORTON International Inc. PAGE NUMBER : A4 OF A7 TEL : 886-3-327-3456 FAX : 886-3-327-0973 Report No.:482967 SPORTON International Inc. PAGE NUMBER : A5 OF A7 TEL : 886-3-327-3456 FAX : 886-3-327-0973 Report No.:482967 SPORTON International Inc. PAGE NUMBER : A6 OF A7 TEL : 886-3-327-3456 FAX : 886-3-327-0973 Report No.:482967 SPORTON International Inc. PAGE NUMBER : A7 OF A7 TEL : 886-3-327-3456 FAX : 886-3-327-0973

Report No.: FR482967 FCC ID: K7SF9K1106V2 Page No. : C1 of C3 Appendix C. Maximum Permissible Exposure Report No.: FR482967 FCC ID: K7SF9K1106V2 Page No. : C2 of C3 1. Maximum Permissible Exposure 1.1. Applicable Standard Systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy levels in excess limit for maximum permissible exposure. In accordance with 47 CFR FCC Part 2 Subpart J, section 2.1091 this device has been defined as a mobile device whereby a distance of 0.2 m normally can be maintained between the user and the device. (A) Limits for Occupational / Controlled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/ cm²) Averaging Time |E|²,|H|² or S (minutes) 0.3-3.0 614 1.63 (100)* 6 3.0-30 1842 / f 4.89 / f (900 / f)* 6 30-300 61.4 0.163 1.0 6 300-1500 F/300 6 1500-100,000 5 6 (B) Limits for General Population / Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/ cm²) Averaging Time |E|²,|H|² or S (minutes) 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f)* 30 30-300 27.5 0.073 0.2 30 300-1500 F/1500 30 1500-100,000 1.0 30 Note: f = frequency in MHz ; *Plane-wave equivalent power density 1.2. MPE Calculation Method E (V/m) ＝ d GP30 Power Density: Pd (W/m²) ＝ 377 2 E E ＝ Electric field (V/m) P ＝ Average RF output power (W) G ＝ EUT Antenna numeric gain (numeric) d ＝ Separation distance between radiator and human body (m) The formula can be changed to Pd ＝ 2 377 30 d GP   From the EUT RF output power, the minimum mobile separation distance, d=0.2m, as well as the gain of the used antenna, the RF power density can be obtained. Report No.: FR482967 FCC ID: K7SF9K1106V2 Page No. : C3 of C3 1.3. Calculated Result and Limit Exposure Environment: General Population / Uncontrolled Exposure For 5GHz UNII Band: Antenna Type : Printed Antenna Conducted Power for IEEE 802.11n HT20 : 22.68 dBm Average Output Power Distance (m) Antenna Gain (dBi) Antenna Gain (numeric) (dBm) (mW) Power Density (S) (mW/cm²) Limit of Power Density (S) (mW/cm²) Test Result 0.2 3.00 1.9953 22.6754 185.1557 0.073534 1 Complies For 2.4GHz Band: Antenna Type : Printed Antenna Conducted Power for IEEE 802.11g: 22.16 dBm Average Output Power Distance (m) Antenna Gain (dBi) Antenna Gain (numeric) (dBm) (mW) Power Density (S) (mW/cm²) Limit of Power Density (S) (mW/cm²) Test Result 0.2 2.92 1.9588 22.1621 164.5159 0.064144 1 Complies Conclusion: Both of the WLAN 2.4GHz Band and WLAN 5GHz Band can transmit simultaneously, the formula of calculated the MPE is: CPD1 / LPD1 + CPD2 / LPD2 + ......etc. < 1 CPD = Calculation power density LPD = Limit of power density Therefore, the worst-case situation is 0.064144 / 1 + 0.073534 / 1 = 0.137678, which is less than “1”. This confirmed that the device comply with FCC 1.1310 MPE limit.

SPORTON International Inc. No. 52, Hwa Ya 1st Rd., Hwa Ya Technology Park, Kwei-Shan Hsiang, Tao Yuan Hsien, Taiwan, R.O.C. Ph: 886-3-327-3456 / FAX: 886-3-327-0973 / www.sporton.com.tw Report Format Version: Rev. 02 FCC RADIO TEST REPORT Applicant’s company Belkin International, Inc. Applicant Address 12045 East Waterfront Drive, Playa Vista, CA 90094 United States FCC ID K7SF9K1106V2 Product Name Dual-Band Wireless Range Extender Brand Name belkin Model No. F9K1106v2 Test Rule 47 CFR FCC Part 15 Subpart C § 15.247 Test Freq. Range 2400 ~ 2483.5MHz Received Date Aug. 29, 2014 Final Test Date Oct. 03, 2014 Submission Type Original Equipment Statement Test result included in this report is for the IEEE 802.11n and IEEE 802.11b/g of the product. The test result in this report refers exclusively to the presented test model / sample. Without written approval of SPORTON International Inc., the test report shall not be reproduced except in full. The measurements and test results shown in this test report were made in accordance with the procedures and found in compliance with the limit given in ANSI C63.10-2013, 47 CFR FCC Part 15 Subpart C, KDB 558074 D01 v03r02 and KDB 662911 D01 v02r01. The test equipment used to perform the test is calibrated and traceable to NML/ROC. Report No.: FR482967AA Report Format Version: Rev. 02 Page No. : i of ii FCC ID: K7SF9K1106V2 Issued Date : Oct. 17, 2014 Table of Contents 1. CERTIFICATE OF COMPLIANCE ......................................................................................................................... 1 2. SUMMARY OF THE TEST RESULT .......................................................................................................................... 2 3. GENERAL INFORMATION .................................................................................................................................. 3 3.1. Product Details....................................................................................................................................................................................3 3.2. Accessories .........................................................................................................................................................................................4 3.3. Table for Filed Antenna.......................................................................................................................................................................5 3.4. Table for Carrier Frequencies .............................................................................................................................................................6 3.5. Table for Test Modes ...........................................................................................................................................................................7 3.6. Table for Testing Locations..................................................................................................................................................................8 3.7. Table for Supporting Units ...................................................................................................................................................................8 3.8. Table for Parameters of Test Software Setting .....................................................................................................................................9 3.9. EUT Operation during Test ...................................................................................................................................................................9 3.10. Duty Cycle ..........................................................................................................................................................................................9 3.11. Test Configurations ...........................................................................................................................................................................10 4. TEST RESULT ................................................................................................................................................... 12 4.1. AC Power Line Conducted Emissions Measurement.........................................................................................................................12 4.2. Maximum Conducted Output Power Measurement .........................................................................................................................16 4.3. Power Spectral Density Measurement ..............................................................................................................................................19 4.4. 6dB Spectrum Bandwidth Measurement ..........................................................................................................................................27 4.5. Radiated Emissions Measurement ....................................................................................................................................................32 4.6. Emissions Measurement ....................................................................................................................................................................51 4.7. Antenna Requirements .....................................................................................................................................................................69 5. LIST OF MEASURING EQUIPMENTS ................................................................................................................... 70 6. MEASUREMENT UNCERTAINTY.......................................................................................................................... 72 APPENDIX A. PHTOGRAPHS OF EUT ............................................................................................ A1 ~ A11 APPENDIX B. TEST PHOTOS......................…

Text truncated - open the document above for the full version.

Report No.: FR482967 FCC ID: K7SF9K1106V2 Page No. : D1 of D3 Appendix D. Radiated Emission Co-location Report Report No.: FR482967 FCC ID: K7SF9K1106V2 Page No. : D2 of D3 1. Results of Radiated Emissions for Co-located Temperature 26°C Humidity 68% Test Engineer Taka Hsu / Magic Lai Configurations 2.4GHz + 5GHz Horizontal Report No.: FR482967 FCC ID: K7SF9K1106V2 Page No. : D3 of D3 Vertial

Report No.: FR482967 FCC ID: K7SF9K1106V2 Page No. : B1 of B5 Appendix B. Test Photos Report No.: FR482967 FCC ID: K7SF9K1106V2 Page No. : B2 of B5 1. Photographs of Conducted Emissions Test Configuration FRONT VIEW REAR VIEW Report No.: FR482967 FCC ID: K7SF9K1106V2 Page No. : B3 of B5 2. Photographs of Radiated Emissions Test Configuration Test Configuration: 9kHz ~30MHz FRONT VIEW REAR VIEW Report No.: FR482967 FCC ID: K7SF9K1106V2 Page No. : B4 of B5 Test Configuration: 30MHz~1GHz FRONT VIEW REAR VIEW Report No.: FR482967 FCC ID: K7SF9K1106V2 Page No. : B5 of B5 Test Configuration: Above 1GHz FRONT VIEW REAR VIEW