K7SF9K1116V1AC750 DB Wi-Fi Dual-Band AC+Router

<NEW BELKIN LOGO> AC750 DB Wi-Fi® Dual-Band AC+ Router USER MANUAL 8820-01287 Rev. A00 F9K1116V1 TABLE OF CONTENTS Getting Started What’s in the Box Initial Setup Advanced Tools & Settings The Belkin Router Manager Adding Computers to Your Network Manually Set Up Your Internet Connection Additional Capabilities Adding USB Devices USB Print and Storage Manager Guest Access Media Server Website Filters by Norton IntelliStream QoS IPv6 Configuration Getting to Know Your Router Front Panel Back Panel Technical Details Technical Features System Requirements Using Your Router Enabling Auto Update on Your Router Updating Your Router via Your System Tray or Menu Bar Updating the Router’s Firmware via the Web Interface Resetting the Router Restoring your Router to Factory Defaults Restoring the Router to Default Settings Using the Web Interface Troubleshooting, Support, and Warranty Troubleshooting Technical Support Belkin International, Inc., Limited 2-Year Product Warranty Regulatory Information FCC Statement Getting Started What’s in the Box AC750 DB Wi-Fi Dual-Band AC+ Router Ethernet cable (attached to router) Power supply (attached to router) Network information card (attached to router) Quick Setup Guide Initial Setup Where to Place Your Router For the best results, place the Router next to your modem in an open location away from large metal objects and magnets such as those found in speakers. Raising the Router above floor level can improve the strength of your wireless signal. How to Set It Up Connect Your AC750 DB Router 1. Turn off your modem by disconnecting its power supply. 2. Connect your Router to your modem using the cable (already attached). [You can get the actual artwork from the N800DB QIG “QIG_F9K1104_8820-01231 Rev.A00_N800.pdf”] <diagram needs to be updated. Yellow port is the 5 th port down (currently it is the 1 st port). Also, new belkin branding on the side, suggest saving new image as a different file name> ]] 3. Power up your modem by plugging in its power supply. 4. Power up your Router by plugging in its power supply. [You can get the actual artwork from the N800DB QIG “QIG_F9K1104_8820-01231 Rev.A00_N800.pdf”] <diagram needs to be updated. Yellow port is the 5 th port down (currently it is the 1 st port). Also, new belkin branding on the side, suggest saving new image as a different file name> ]] You may need to enter a username and password provided by your ISP. This username and password is likely to be found on materials that came from your ISP when you signed up for service. If necessary, you may need to contact your ISP to retrieve your username and password. If yo u have a static IP addr ess, you may need to enter additional information also provided by your ISP. If your computer doesn’t have a wireless adapter, or the setup software is unable to control it, you may be asked to connect your computer to the Router with a network cable. Advanced Tools & Settings [SCREENSHOT OF ADVANCED MENU setup advanced2.png] After the initial setup is complete, you have the option to change settings like your network name, security type, and password. To make these changes and others, click on the Advanced Tools icon at the CD Setup menu and select one of the following settings that you would like to cha ng e : Network Name & Security Personalize your network name (SSID), password, and strength of wireless security. Internet Service Provider & Login Settings Have you moved or changed Internet Service Providers? If you’d like to change these settings without running through the setup process again, this is the place. The Belkin Router Manager [N600 SCREENSHOT OF TRAY APP MENU (TBD)] The Belkin Router Manager appears in your system tray (Windows) or menu bar (Mac). Its icon indicates the current status of your Router and also allows you to access your Router’s settings to make changes. It also provides quick access to software that came bundled with your Router. To acc ess the Router settings, cli ck on the icon and select from the menu that appears. The status of your Router is shown by the Belkin Router Manager icon, which closely mimics the light on the front of the Router. Blue: You are connected to your Belkin Router and it is connected to the Internet. Amber: You are connected to your Belkin Router, but it is not connected to the Internet. Adding Computers to Your Network Wireless devices such as computers, network printers, and gaming systems can connect to your Router with a few simple steps. Manual Setup If you know what sort of Internet service you have, you might try a manual setup. For this, you will need a Wi-Fi-enabled smartphone, tablet, or computer. Connect to Your Router Retrieve the network ID card from the foot of your new Belkin Router. [Diagram of bottom of the router showing service card – can be obtained from “Tested QIG 2011 07 14.pdf” provided] Can’t find the card? The default network name and password are also printed on the foot of the Router. Use your computer, tablet, or smartphone to connect to the wireless network shown on the network ID card. [Diagram of connecting to SSID screenshot – needs creating, take direction from “Tested QIG 2011 07 14.pdf” provided] When requested, please enter the password (security key) provided on the card. Take a moment to look at the light on the front of the Router. If it is solid blue, your Router was able to connect to the Internet automatically. [Image of front of the router with blue LED (needs creating)] If not, please proceed to “Manually Set Up Your Internet Connection” on page XX. Using the WPS Button 1) Start WPS Push Button Connection (WPS PBC) on your computer or other Wi‐Fi device that you would like to connect wirelessly to your Router. Often there will be a button for this purpose in software that came with the device, or a physical “WPS,” “PBC,” or “Security” button on the device its elf. 2) Within two minutes, press the WPS button on yo ur Router and hold for two seconds. The WPS light (small lig…

Text truncated - open the document above for the full version.

Confidential Letter Date: 2012/11/20 Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mills Road Columbia, Maryland 21046 Subject: Confidentiality Request for FCC ID ：K7SF9K1116V1 Gentlemen: The form 731 and application have been electronically submitted and any attachments will be up loaded to your web site to be used in obtaining a grant of certification. Short-term Pursuant to DA 04-1705 of the Commission’s pubic notice, we request short-term confidential treatment for the following information until 180 days after the Grant Date of Equipment Authorization in order to ensure sensitive business information remains confidential until the actual marketing of the device: 1. External Photos 2. Internal Photos 3. Test Setup photos 4. User’s Manual Permanent Belkin International, Inc. requests that the material in the following files be withheld from public disclosure in accordance with Section 0.459 of the Commission’s Rules, 47 C.F.R. 0.459, following grant of the application. 1. Block Diagram 2. Circuit Diagram 3. Operational Description Should you require any further information, please contact the undersigned. Thank you for your consideration in this matter. Sincerely, Applicant’s company name : Belkin International, Inc. Applicant’s company address : 12045 East Waterfront Drive, Playa Vista, CA 90094 Signature : _____________________________ Job Title and Dept. : Daniel Wesey / Manager, Global Engineering Services E-Mail : [email protected] Tel. : 1-310-751-2816

DoC Attestation Letter Date: 2012/11/20 We Belkin International, Inc., as the grantee of this project (FCC ID: K7SF9K1116V1 / Brand Name: Belkin / Model No.: F9K1116V1), would like to declare that the composite portion categorized as computer peripheral has been authorized under the Declaration of Conformity procedures (Sproton report No.: FD2N1310, FCC Test Firm Registration No.: 187376). The final product shall consequently comply with the FCC rule applied for DoC Procedure. Regards, FCC Grantee contact person information. Applicant’s company name : Belkin International, Inc. Applicant’s company address : 12045 East Waterfront Drive, Playa Vista, CA 90094 Signature : _____________________________ Job Title and Dept. : Daniel Wesey / Manager, Global Engineering Services E-Mail : [email protected] Tel. : 1-310-751-2816

Power of Attorney Date: 2012/11/20 Dear Sir, I hereby have entrusted the following person to be a proxy regarding application for Type Certification. Sporton International Inc. Address : No.8, Lane 724, Bo-ai St., Jhubei City, HsinChu County 302, Taiwan, R.O.C. Name : Leo Huang Job Title : Manager e-mail : [email protected] I am therefore responsible for the contents of the application. Brand name and model type of the specified radio equipment: Belkin / F9K1116V1 FCC ID: K7SF9K1116V1 Product name: AC750 DB Wi-Fi Dual-Band AC+ Router FCC Grantee contact person information. Applicant’s company name : Belkin International, Inc. Applicant’s company address : 12045 East Waterfront Drive, Playa Vista, CA 90094 Signature : ____________________________ Job Title and Dept. : Daniel Wesey / Manager, Global Engineering Services E-Mail : [email protected] Tel. : 1-310-751-2816

Report No.: 2N1310 SPORTON International Inc. PAGE NUMBER : A1 OF A7 TEL : 886-2-2696-2468 FAX : 886-2-2696-2255 APPENDIX A. Photographs of EUT Report No.: 2N1310 SPORTON International Inc. PAGE NUMBER : A2 OF A7 TEL : 886-2-2696-2468 FAX : 886-2-2696-2255 Report No.: 2N1310 SPORTON International Inc. PAGE NUMBER : A3 OF A7 TEL : 886-2-2696-2468 FAX : 886-2-2696-2255 Report No.: 2N1310 SPORTON International Inc. PAGE NUMBER : A4 OF A7 TEL : 886-2-2696-2468 FAX : 886-2-2696-2255 Adapter 1 Model: DSA-18PFG-12 FUS 120150 Report No.: 2N1310 SPORTON International Inc. PAGE NUMBER : A5 OF A7 TEL : 886-2-2696-2468 FAX : 886-2-2696-2255 Adapter 2 Model: DSA-12PFE-12 BUS 120100 Report No.: 2N1310 SPORTON International Inc. PAGE NUMBER : A6 OF A7 TEL : 886-2-2696-2468 FAX : 886-2-2696-2255 Report No.: 2N1310 SPORTON International Inc. PAGE NUMBER : A7 OF A7 TEL : 886-2-2696-2468 FAX : 886-2-2696-2255 RJ-45 Cable

Report No.: 2N1310 SPORTON International Inc. PAGE NUMBER : A1 OF A9 TEL : 886-2-2696-2468 FAX : 886-2-2696-2255 APPENDIX A. Photographs of EUT Report No.: 2N1310 SPORTON International Inc. PAGE NUMBER : A2 OF A9 TEL : 886-2-2696-2468 FAX : 886-2-2696-2255 Report No.: 2N1310 SPORTON International Inc. PAGE NUMBER : A3 OF A9 TEL : 886-2-2696-2468 FAX : 886-2-2696-2255 Report No.: 2N1310 SPORTON International Inc. PAGE NUMBER : A4 OF A9 TEL : 886-2-2696-2468 FAX : 886-2-2696-2255 Report No.: 2N1310 SPORTON International Inc. PAGE NUMBER : A5 OF A9 TEL : 886-2-2696-2468 FAX : 886-2-2696-2255 Report No.: 2N1310 SPORTON International Inc. PAGE NUMBER : A6 OF A9 TEL : 886-2-2696-2468 FAX : 886-2-2696-2255 Report No.: 2N1310 SPORTON International Inc. PAGE NUMBER : A7 OF A9 TEL : 886-2-2696-2468 FAX : 886-2-2696-2255 Report No.: 2N1310 SPORTON International Inc. PAGE NUMBER : A8 OF A9 TEL : 886-2-2696-2468 FAX : 886-2-2696-2255 Report No.: 2N1310 SPORTON International Inc. PAGE NUMBER : A9 OF A9 TEL : 886-2-2696-2468 FAX : 886-2-2696-2255

Report No.: FR2N1310 FCC ID: K7SF9K1116V1 Page No. : C1 of C3 Appendix C. Maximum Permissible Exposure Report No.: FR2N1310 FCC ID: K7SF9K1116V1 Page No. : C2 of C3 1. Maximum Permissible Exposure 1.1. Applicable Standard Systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy levels in excess limit for maximum permissible exposure. In accordance with 47 CFR FCC Part 2 Subpart J, section 2.1091 this device has been defined as a mobile device whereby a distance of 0.25 m normally can be maintained between the user and the device. (A) Limits for Occupational / Controlled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/ cm²) Averaging Time |E|²,|H|² or S (minutes) 0.3-3.0 614 1.63 (100)* 6 3.0-30 1842 / f 4.89 / f (900 / f)* 6 30-300 61.4 0.163 1.0 6 300-1500 F/300 6 1500-100,000 5 6 (B) Limits for General Population / Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/ cm²) Averaging Time |E|²,|H|² or S (minutes) 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f)* 30 30-300 27.5 0.073 0.2 30 300-1500 - - F/1500 30 1500-100,000 - - 1.0 30 Note: f = frequency in MHz ; *Plane-wave equivalent power density 1.2. MPE Calculation Method E (V/m) ＝ d GP30 Power Density: Pd (W/m²) ＝ 377 2 E E ＝ Electric field (V/m) P ＝ Average RF output power (W) G ＝ EUT Antenna numeric gain (numeric) d ＝ Separation distance between radiator and human body (m) The formula can be changed to Pd ＝ 2 377 30 d GP   From the EUT RF output power, the minimum mobile separation distance, d=0.2m, as well as the gain of the used antenna, the RF power density can be obtained. Report No.: FR2N1310 FCC ID: K7SF9K1116V1 Page No. : C3 of C3 1.3. Calculated Result and Limit For 5GHz UNII Band: (15.407) Antenna Type : Printed Antenna Max Conducted Power for IEEE 802.11an 20MHz : 15.98 dBm lAntenna Gain (dBi) Antenna Gain (numeric) Average Output Power (dBm) Average Output Power (mW) Power Density (S) (mW/cm²) Limit of Power Density (S) (mW/cm²) Test Result 4.34 2.7164 15.9800 39.6278 0.021426 1 Complies For 5GHz ISM Band: Antenna Type : Printed Antenna Max Conducted Power for IEEE 802.11an40 : 23.69 dBm Antenna Gain (dBi) Antenna Gain (numeric) Average Output Power (dBm) Average Output Power (mW) Power Density (S) (mW/cm²) Limit of Power Density (S) (mW/cm²) Test Result 4.56 2.8576 23.6929 234.0394 0.133119 1 Complies For 2.4GHz Band: Antenna Type : Printed Antenna Max Conducted Power for IEEE 802.11n20 : 24.49 dBm Antenna Gain (dBi) Antenna Gain (numeric) Average Output Power (dBm) Average Output Power (mW) Power Density (S) (mW/cm²) Limit of Power Density (S) (mW/cm²) Test Result 4.97 3.1405 24.4906 281.2302 0.175797 1 Complies CONCULSION: Both of the WLAN 2.4GHz Band and WLAN 5GHz Band can transmit simultaneously, the formula of calculatedthe MPE is: CPD1 / LPD1 + CPD2 / LPD2 + ......etc. < 1 CPD = Calculation power density LPD = Limit of power density Therefore, the worst-case situation is 0.133119 / 1 + 0.175797 / 1 =0.308916, which isless than “1”. This confirmed that the device comply with FCC 1.1310 MPE limit.

Report No.: FR2N1310 FCC ID: K7SF9K1116V1 Page No. : D1 of D3 Appendix D. Co-location Report No.: FR2N1310 FCC ID: K7SF9K1116V1 Page No. : D2 of D3 1. Results of Radiated Emissions for Co-located Temperature 24.5°C Humidity 57% Test Engineer Jim Huang Configurations 2.4G + 5G TX Horizontal Report No.: FR2N1310 FCC ID: K7SF9K1116V1 Page No. : D3 of D3 Vertial

SPORTON International Inc. No. 52, Hwa Ya 1st Rd., Kwei-Shan Hsiang, TaoYuan Hsien, Taiwan, R.O.C. Ph: 886-3-327-3456 / FAX: 886-3-327-0973 / www.sporton.com.tw Report Format Version: 01 FCC RADIO TEST REPORT Applicant’s company Belkin International, Inc. Applicant Address 12045 E. Waterfront Drive Playa Viste, CA 90094, USA FCC ID K7SF9K1116V1 Product Name AC750 DB Wi-Fi Dual-Band AC+ Router Brand Name Belkin Model Name F9K1116V1 Test Rule Part(s) 47 CFR FCC Part 15 Subpart E § 15.407 Test Freq. Range 5150 ~ 5250MHz Received Date Nov. 13, 2012 Final Test Date Dec. 17, 2012 Submission Type Original Equipment Statement Test result included is for the IEEE 802.11n and IEEE 802.11a/ac (5150 ~ 5250MHz) of the product. The test result in this report refers exclusively to the presented test model / sample. Without written approval of SPORTON International Inc., the test report shall not be reproduced except in full. The measurements and test results shown in this test report were made in accordance with the procedures and found in compliance with the limit given in ANSI C63.10-2009, 47 CFR FCC Part 15 Subpart E and KDB 789033 D01 v01r02, KDB662 D01 v01r02. The test equipment used to perform the test is calibrated and traceable to NML/ROC. Report No.: FR2N1310AB Report Format Version: 01 Page No. : i of ii FCC ID: K7SF9K1116V1 Issued Date :Dec. 18, 2012 Table of Contents 1. CERTIFICATE OF COMPLIANCE ........................................................................................................................... 1 2. SUMMARY OF THE TEST RESULT ............................................................................................................................ 2 3. GENERAL INFORMATION..................................................................................................................................... 3 3.1. Product Details ........................................................................................................................................................................................... 3 3.2. Accessories ................................................................................................................................................................................................. 6 3.3. Table for Filed Antenna ............................................................................................................................................................................. 7 3.4. Table for Carrier Frequencies ................................................................................................................................................................... 8 3.5. Table for Test Modes .................................................................................................................................................................................. 8 3.6. Table for Testing Locations........................................................................................................................................................................ 9 3.7. Table for Supporting Units ....................................................................................................................................................................... 10 3.8. Table for Parameters of Test Software Setting ..................................................................................................................................... 11 3.9. Test Configurations................................................................................................................................................................................... 12 4. TEST RESULT......................................................................................................................................................... 15 4.1. AC Power Line Conducted Emissions Measurement ......................................................................................................................... 15 4.2. 99% Occupied Bandwidth Measurement............................................................................................................................................ 21 4.3. Maximum Conducted Output Power Measurement......................................................................................................................... 31 4.4. Power Spectral Density Measurement.................................................................................................................................................. 35 4.5. Peak Excursion Measurement ................................................................................................................................................................ 41 4.6. Radiated Emissions Measurement......................................................................................................................................................... 46 4.7. Band Edge Emissions Measurement...................................................................................................................................................... 63 4.8. Frequency Stability Measurement......................................................................................................................................................... 71 4.9. Antenna Requirements ........................................................................................................................................................................... 73 5. LIST OF MEASURING EQUIPMENTS .................................................................................................................... 74 6. TEST LOCATION.................................................................................................................................................. 76 7. TAF CERTIFICATE OF ACCREDITATION.........................................................................................…

Text truncated - open the document above for the full version.

Report No.: FR2N1310 FCC ID: K7SF9K1116V1 Page No. : B1 of B6 Appendix B. Test Photos Report No.: FR2N1310 FCC ID: K7SF9K1116V1 Page No. : B2 of B6 1. Photographs of Conducted Emissions Test Configuration Test Mode: Mode 1. FRONT VIEW REAR VIEW Report No.: FR2N1310 FCC ID: K7SF9K1116V1 Page No. : B3 of B6 Test Mode: Mode 2. FRONT VIEW REAR VIEW Report No.: FR2N1310 FCC ID: K7SF9K1116V1 Page No. : B4 of B6 2. Photographs of Radiated Emissions Test Configuration Test Configuration: 9kHz ~30MHz FRONT VIEW REAR VIEW Report No.: FR2N1310 FCC ID: K7SF9K1116V1 Page No. : B5 of B6 Test Configuration: 30MHz~1GHz / Test Mode: Mode 1. ~ Mode 2. FRONT VIEW REAR VIEW Report No.: FR2N1310 FCC ID: K7SF9K1116V1 Page No. : B6 of B6 Test Configuration: Above 1GHz FRONT VIEW REAR VIEW