K7SG1S0001Smart Speaker

SOUND FORM ™ ELITE Hi-Fi Smart Speaker + Wireless Charger SKU/MODEL: G1S0001 REGULATORY AND SUSTAINABILITY INFORMATION INFORMATIONS RELATIVES À LA RÈGLEMENTATION ET À LA DURABILITÉ Federal Communications Commission Interference StatementDECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITYWe, Belkin International, Inc., of 12045 E. Waterfront Drive, Playa Vista, CA 90094, Tel: +1 (310) 751 5100, declare under our sole responsibility that the product G1S0001 to which this declaration relates, complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Federal Communications Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:• Reorient or relocate the receiving antenna.• Increase the distance between the equipment and the receiver.• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.Radiation Exposure Statement:This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. To maintain compliance with FCC RF exposure compliance requirements, please follow operation instructions as documented in this manual. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.Innovation, Science and Economic Development Canada StatementCAN ICES-3 (B)/NMB-3 (B)This device complies with ISED’s license-exempt RSS standards. Operation is subject to the following two conditions:1) This device may not cause interference, and2) This device must accept any interference, including interference that may cause undesired operation of the device.For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible.Radiation Exposure Statement: Rstrictions in the 5 GHz BandThe device for the band 5150-5250 MHz is only for indoor usage to reduce potential for harmful interference to co-channel mobile satellite systems.This class B digital apparatus complies with ICES-003(B), RSS-216 and RSS-247. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. The installer of this radio equipment must ensure that the product is located such that it does not emit RF field in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable from Health Canada’s Web site www.hc-sc.gc.ca/rpb . As mentioned before, the installer cannot control the antenna orientation. However, they could place the complete product in a way that causes the problem mentioned above. The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems. Be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. Simplified EU Declaration of ConformityWe, Belkin International, Inc., declare under our sole responsibility that the product G1S0001 to which this declaration relates, is in conformity with RED Directive 2014/53/EU, Energy Directive 2005/32/EC & 2009/125/EC and RoHS Directive 2011/65/EU (Recast). The full text of the EU declaration of conformity is available at the followi ng Internet address: www.belkin.com/doc Radiation Exposure Statement: This equipment complies with radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.This product does not have a standby or off mode other than removing the connection from the wall charger to the smart speaker wireless charger or removing the wall charger from the AC mains. The operating frequency bands and the maximum transmitted power limit are listed below:2402-2480 (Bluetooth) MHz <20mW 2412-2472 MHz <95mW5180-5240 MHz <195mW 5260-5320 MHz <195mW 5500-5700 MHz <195mW 5745-5825 MHz <25mW 127.8 KHz <0.005mW National RestrictionsCaution: This device is restricted to indoor use only when operating in 5150 - 5350 MHz for below EU countries: Disposal Information for User For information on product disposal, please refer to http://www.belkin.com/uk/weee-regulations/Pursuant to and in accordance with Article 14 of the Directive 2012/19/EU of the European Parliament on waste in electrical and electronic equipment (WEEE). The barred symbol of the rubbish bin shown on the equipment indicates that, at the end of its useful life, the product must be collected separate…

Text truncated - open the document above for the full version.

! Use your voice to connect to Bluetooth ® . Follow this QR code or visit Belkin.com/us/connect- soundform-elite/ to begin setup Utilisez ce code QR ou rendez-vous sur Belkin.com/us/ connect-soundform-elite/ pour commencer la configuration Utilisez votre voix pour vous connecter en Bluetooth. or/ou 3 sec Voyant de chargement sans fil Luz de carga inalámbrica LED di ricarica wireless Luz de carregamento sem fios Lampa för trådlös laddning Statuslampje voor draadloos opladen Vezeték nélküli töltést jelző fény Lampica za bežično punjenje Λυχνία ασύρματης φόρτισης Indikátor bezdrátového nabíjení Indikátor bezdrôtového nabíjania Индикатор беспроводной зарядки Kontrolka ładowania bezprzewodowego Leuchtanzeige für drahtloses Laden خفض مستوى الصوتتشغيل/إيقاف مؤقترفع مستوى الصوتتشغيل/إيقاف تشغيل الميكروفون ضوء الشحن اللاسلكيالميكروفوناتيضيء أثناء التنشيط إعادة التعيين Micros Micrófonos Microfoni Microfones Mikrofoner Microfoons Mikrofonok Mikrofoni Μικρόφωνα Mikrofony Mikrofóny Микрофоны Mikrofon Mikrofone Baisser volume Leiser Bajar volumen Volume Giù Diminuir volume Zmniejsz głośność Тише Snížení hlasitosti Zníženie hlasitosti Volym ned Volume lager Hangerő lefelé módosítása Smanjenje jačine tona Μείωση έντασης S’allume quand activé Luces de encendido LED quando attivo Luzes quando ativo Tänd vid aktivitet Activiteitslampjes Fények, amikor aktív Svetli kad je aktivno Λυχνίες όταν είναι ενεργό Indikátor aktivity Svieti, ak je aktívne Индикаторы активности Świeci, gdy urządzenie jest aktywne Aktivitätsanzeige Lecture/Pause Abspielen/Pause Reproducir/Pausar Riproduci/Pausa Reproduzir/Pausa Odtwórz/wstrzymaj Воспроизведение/пауза Přehrát/pauza Prehrávanie/pauza Spela upp/paus Afspelen/Pauze Lejátszás/szünet Reprodukcija/pauziranje Αναπαραγωγή/παύση Réinitialisation Reinicio Ripristina Reiniciar Återställ Resetknop Visszaállítás Resetovanje Επαναφορά Reset Reset Сброс Reset Reset Monter volume Lauter Subir volumen Volume Su Aumentar volume Zwiększ głośność Гр о м ч е Zvýšení hlasitosti Zvýšenie hlasitosti Volym upp Volume hoger Hangerő felfelé módosítása Pojačavanje jačine tona Αύξηση ένταση Activation/désactivation du micro Mikrofon an/aus Micrófono activado/desactivado Microfono acceso/spento Ligar/desligar microfone Wł./wył. mikrofon Микрофон вкл./выкл. Mikrofon zap./vyp. Zapnúť/vypnúť mikrofón Mikrofon av/på Microfoon aan/uit Mikrofon be/ki Uključivanje/isključivanje mikrofona Μικρόφωνο ανοικτό/κλειστό 2345 7968 8820gl02980 Rev.A00 Bluetooth Volume down Play/pause Volume up Microphone on/off Microphones Reset Wireless charging light Lights when active 1 2 3 4 5 7 9 6 8 Volume bas Lecture / Pause Volume haut Microphone On / Off Bouton de réinitialisation Voyant de recharge sans fil Voyants allumés lorsque l’enceinte est active Business Unit: Program Manager: Packaging Engineer: Material: Blank Size (in): Side Shown: L x W x D (mm): DIE LAYOUT B Unit: Flute/Grain: REV Intermediate PRINT SIDE L x W x D (in): 92.78 [3+21/32] 98 [3+27/32] FRONT BACK QIG 157 gsm Art Paper 360.7 [14+3/16] IN/MM Drawing Scale 1:1 Retail Outside Dimension (Including Hang Tab) DO NOT PRINT DIE LINES, PRINTERS NOTES PRINT SPECS: DIE/MATERIAL SPECS: 360.70 x 238.00 360.70 x 238.00 Die Line File: Core Andrew Camba Matthew Duffy Please refer to drawing IDL_SAP 109 QIG Color Plates: Notes: Artwork File: horizontal 00 RELEASE DATE: 12/04/2019 Tolerance:+/- 1/32" - 0.8mm Blank Size (mm): Finish: DIELINE: THIS DOCUMENT & THE INFORMATION IN IT ARE THE CONFIDENTIAL PROPERTY OF BELKIN INTERNATIONAL AND MUST NOT BE COPIED, REPRODUCED OR USED IN ANY MANNER WITHOUT THE WRITTEN CONSENT OF BELKIN CORPORATION. IT MUST BE RETURNED UPON REQUEST This dieline works for following skus (if any): Business Unit: Program Manager: Packaging Engineer: Material: Blank Size (in): Side Shown: L x W x D (mm): DIE LAYOUT B Unit: Flute/Grain: REV Intermediate PRINT SIDE L x W x D (in): 92.78 [3+21/32] 98 [3+27/32] FRONT BACK QIG 157 gsm Art Paper 360.7 [14+3/16] IN/MM Drawing Scale 1:1 Retail Outside Dimension (Including Hang Tab) DO NOT PRINT DIE LINES, PRINTERS NOTES PRINT SPECS: DIE/MATERIAL SPECS: 360.70 x 238.00 360.70 x 238.00 Die Line File: Core Andrew Camba Matthew Duffy Please refer to drawing IDL_SAP 109 QIG Color Plates: Notes: Artwork File: horizontal 00 RELEASE DATE: 12/04/2019 Tolerance:+/- 1/32" - 0.8mm Blank Size (mm): Finish: DIELINE: THIS DOCUMENT & THE INFORMATION IN IT ARE THE CONFIDENTIAL PROPERTY OF BELKIN INTERNATIONAL AND MUST NOT BE COPIED, REPRODUCED OR USED IN ANY MANNER WITHOUT THE WRITTEN CONSENT OF BELKIN CORPORATION. IT MUST BE RETURNED UPON REQUEST This dieline works for following skus (if any): QSG_G1S0001xxx-XXXP1_8820gl02980_RevA00_SoundForm_Smart_Speaker_NoGoogle C Y M K PMS 7488 ALL TEXT AND GRAPHIC ELEMENTS COLOR: CMYK, PMS 7488C OVERALL PP COAT INNOVATION CREATIVE GROUP 95600 FILE NAME QSG_G1S0001xxx-XXXP1_8820gl02980_RevA00_SoundForm_Smart_Speaker_NoGoogle SKU# G1S0001xxx-XXXP1 P# 8820gl02980 REV A00 DESIGNER Jonathan DAT E 12/10/19 6:46 PM VERSION 01

SCS-F18: Project and Product Certification Representative Authorization Letter Page 1 of 2 Rev 6.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Project and Product Certification Representative Authorization Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Revised wording (obsolete) 1.0 2.0 Sept–25-2007 Updated company template (obsolete) 2.0 3.0 Jan-31-2012 Updated letter information (obsolete) 3.0 4.0 May-23-2014 Added FCC ID field (obsolete) 4.0 5.0 Sep-16-2014 Updated company name & logo (current) 5.0 6.0 Jun-27-2018 SCS-F18: Project and Product Certification Representative Authorization Letter Page 2 of 2 Rev 6.0 Belkin International, Inc. 12045 East Waterfront Dr. Playa Vista, California 90094, United States Date: 2020-02-25 To: BVCPS, INC. 775 Montague Expressway, Milpitas, CA 95035 USA Dear Sir/Madam, Re: Product Certification Representative Authorization Letter We, __ Belkin International, Inc.__ hereby authorize Bureau Veritas Consumer Product Services, Inc. to act as a Certification Body for certifying for the following project(s): FCC ID: K7SG1S0001 Product Description: Smart Speaker Model: G1S0001 Sincerely, Jay Tu / Engineer, Regulatory Compliance Belkin International, Inc. Tel: +1 310 633 9309*9142 E-mail: [email protected]

Belkin International, Inc. 12045 East Waterfront Dr. Playa Vista, California 90094, United States Date: February 19, 2020 Federal Communications Commission 7435 Oakland Mills Road - Gate A Columbia, Maryland 21046 Subject: Request for Confidentiality FCC ID: K7SG1S0001 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission’s rules (47CFR§§0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely.  Schematic Diagram  Block Diagram  Operational Description  Software Operational Description Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’ s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachments until 180 days after the Grant Date of Equipment Authorizations.  External Photos  Internal Photos  Test Setup Photos  Users Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards, Jay Tu / Engineer, Regulatory Compliance Belkin International, Inc. Tel: +1 310 633 9309*9142 E-mail: [email protected]

Belkin International, Inc. 12045 East Waterfront Dr. Playa Vista, California 90094, United States Date: February 19, 2020 DTS-UNII Device Declaration Letter To whom it may concern, We have declared below featured for FCC equipment authorization, Device FCC ID: K7SG1S0001 (1) DFS Device -- Master Client with Radar detection capability , Client without radar detection capability N/A (2) Active / Passive Scanning , ad-hoc mode access point capability Frequency Band (MHz) Active Scanning (the device can transmit a probe (beacon)) passive scanning (where the device is can listen only with no probes) Ad Hoc Mode or WIFI Direct capability Access point capability 5150-5250 Yes , No Yes , No Yes , No Yes , No 5250-5350 Yes , No Yes , No Yes , No Yes , No 5470-5725 Yes , No Yes , No Yes , No Yes , No 5725-5850 Yes , No Yes , No Yes , No Yes , No (3) Country code selection ability - Yes , No If yes, please explain how it was implemented: (please also help to provide detail of options for each country selection) (4) Meet 15.202 requirement - Yes, No, Please check below: A master device is defined as a device operating in a mode in which it has the capability to transmit without receiving an enabling signal. In this mode it is able to select a channel and initiate a network by sending enabling signals to other devices A client device is defined as a device operating in a mode in which the transmissions of the device are under control of the master. A device in client mode is not able to initiate a network. (5) For client devices that have software configuration control to operate in different modes (active scanning in some and passive scanning in others) in different bands (devices with multiple equipment classes or those that operate on non-DFS frequencies) or modular devices which configure the modes of operations through software, the application must provide software and operations description on how the software and / or hardware is implemented to ensure that proper operations modes cannot be modified by end user or an installer. Belkin International, Inc. 12045 East Waterfront Dr. Playa Vista, California 90094, United States Apply, No Apply, (If apply, please help to provide explanation on it was implement, and how software was controlled) Factory set only. ____________ Jay Tu / Engineer, Regulatory Compliance Belkin International, Inc. Tel: +1 310 633 9309*9142 E-mail: [email protected]

Belkin International, Inc. 12045 East Waterfront Dr. Playa Vista, California 90094, United States Date: 2020-02-19 FCC ID: K7SG1S0001 AUTHORIZATION LETTER To Whom It May Concern: Belkin International, Inc. hereby authorizes Joanna Hung / Specialist of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (“BV CPS Taoyuan”), to act on its behalf in all matters relating to the Federal Communication Commission (“FCC”) application for equipment authorization in connection with the FCC ID listed above, including signing of all documents relating to these matters. Any and all acts carried out by Joanna Hung / Specialist of BV CPS Taoyuan on Belkin International, Inc.’s behalf, within the scope of the powers granted herein, shall have the same effect as acts of its own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Sincerely yours, -------------------------------- Jay Tu / Engineer, Regulatory Compliance Belkin International, Inc. Tel: +1 310 633 9309*9142 E-mail: [email protected]

Declaration Letter We, Belkin International, Inc. authorize Jay Tu (Belkin Regulatory Compliance Engineer) to sign FCC documents since Rajesh Karki (Previous authorized signature person) is no longer with the company. Any question or concerns regards this authorization, feel free to contact with us Date: 2/25/2020 James Huang Manger, Regulatory Compliance Email: [email protected]

Reference No.: 191202C10-1 Page 1 / 6 CONSTRUCTION PHOTOS OF EUT Reference No.: 191202C10-1 Page 2 / 6 Reference No.: 191202C10-1 Page 3 / 6 Reference No.: 191202C10-1 Page 4 / 6 Reference No.: 191202C10-1 Page 5 / 6 Reference No.: 191202C10-1 Page 6 / 6

The label will be permanently affixed and readily visible. Label location

Reference No.: 191202C10-2 Page 1 / 11 CONSTRUCTION PHOTOS OF EUT Reference No.: 191202C10-2 Page 2 / 11 Reference No.: 191202C10-2 Page 3 / 11 Reference No.: 191202C10-2 Page 4 / 11 Reference No.: 191202C10-2 Page 5 / 11 Reference No.: 191202C10-2 Page 6 / 11 Reference No.: 191202C10-2 Page 7 / 11 Reference No.: 191202C10-2 Page 8 / 11 Reference No.: 191202C10-2 Page 9 / 11 Reference No.: 191202C10-2 Page 10 / 11 Reference No.: 191202C10-2 Page 11 / 11

Report No.: SA191202C10-2 Page No. 1 / 6 Report Format Version: 6.1.1 RF Exposure Report Report No.: SA191202C10-2 FCC ID: K7SG1S0001 Test Model: G1S0001 Received Date: Dec. 02, 2019 Date of Evaluation: Jan. 17, 2020 Issued Date: Jan. 22, 2020 Applicant: Belkin International, Inc Address: 12045 East Waterfront Drive, Playa Vista, USA, CA 90094 Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location: No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, TAIWAN FCC Registration / Designation Number: 788550 / TW0003 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: SA191202C10-2 Page No. 2 / 6 Report Format Version: 6.1.1 Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 RF Exposure .......................................................................................................................................... 5 2.1 Limits for Maximum Permissible Exposure (MPE) .............................................................................. 5 2.2 MPE Calculation Formula ................................................................................................................... 5 2.3 Classification ....................................................................................................................................... 5 2.4 Antenna Gain ...................................................................................................................................... 5 2.5 Calculation Result of Maximum Conducted Power ............................................................................. 6 Report No.: SA191202C10-2 Page No. 3 / 6 Report Format Version: 6.1.1 Release Control Record Issue No. Description Date Issued SA191202C10-2 Original Release Jan. 22, 2020 Report No.: SA191202C10-2 Page No. 4 / 6 Report Format Version: 6.1.1 1 Certificate of Conformity Product: Smart Speaker Brand: belkin Test Model: G1S0001 Sample Status: Engineering Sample Applicant: Belkin International, Inc Date of Evaluation: Jan. 17, 2020 Standards: FCC Part 2 (Section 2.1091) References Test Guidance: KDB 447498 D01 General RF Exposure Guidance v06 IEEE C95.3 -2002 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s RF characteristics under the conditions specified in this report. Prepared by : , Date: Jan. 22, 2020 Gina Liu / Specialist Approved by : , Date: Jan. 22, 2020 Dylan Chiou / Senior Project Engineer Report No.: SA191202C10-2 Page No. 5 / 6 Report Format Version: 6.1.1 2 RF Exposure 2.1 Limits for Maximum Permissible Exposure (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Average Time (minutes) Limits For General Population / Uncontrolled Exposure 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f 2 )* 30 30-300 27.5 0.073 0.2 30 300-1500 ... ... f/1500 30 1500-100,000 ... ... 1.0 30 f = Frequency in MHz ; *Plane-wave equivalent power density 2.2 MPE Calculation Formula Pd = (Pout*G) / (4*pi*r 2 ) where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale pi = 3.1416 r = distance between observation point and center of the radiator in cm 2.3 Classification The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. 2.4 Antenna Gain The antenna information is listed as below. Antenna Type Frequency (MHz) 2400 2450 2500 5150 5470 5725 5850 Dipole Peak Gain (dBi) Antenna 1 3.75 4.16 4.34 4.38 4.13 3.59 3.96 Peak Gain (dBi) Antenna 2 2.64 2.64 2.67 2.75 3.81 3.26 2.54 Report No.: SA191202C10-2 Page No. 6 / 6 Report Format Version: 6.1.1 2.5 Calculation Result of Maximum Conducted Power Band Frequency Band (MHz) Max Power (dBm) Antenna Gain (dBi) Distance (cm) Power Density (mW/cm 2 ) Limit (mW/cm 2 ) WLAN 2412-2462 20.00 6.56 20 0.090 1.00 5180-5240 19.83 6.61 20 0.088 1.00 5260-5320 19.75 6.61 20 0.086 1.00 5…

Text truncated - open the document above for the full version.

Report No.: RF191202C10-4 Page No. 1 / 102 Report Format Version:6.1.2 FCC Test Report Report No.: RF191202C10-4 FCC ID: K7SG1S0001 Test Model: G1S0001 Received Date: Dec. 02, 2019 Test Date: Dec. 12, 2019 ~ Jan. 16, 2020 Issued Date: Jan. 22, 2020 Applicant: Belkin International, Inc Address: 12045 East Waterfront Drive, Playa Vista, USA, CA 90094 Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location (1): No.19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, Taiwan Test Location (2): B2F., No.215, Sec. 3, Beixin Rd., Xindian Dist., New Taipei City 231, Taiwan FCC Registration / Designation Number: 788550 / TW0003 427177 / TW0011 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF191202C10-4 Page No. 2 / 102 Report Format Version:6.1.2 Table of Contents Release Control Record .................................................................................................................................. 4 1 Certificate of Conformity ........................................................................................................................... 5 2 Summary of Test Results ........................................................................................................................... 6 2.1 Measurement Uncertainty ..................................................................................................................... 6 2.2 Modification Record .............................................................................................................................. 6 3 General Information ................................................................................................................................... 7 3.1 General Description of EUT .................................................................................................................. 7 3.2 Description of Test Modes ..................................................................................................................... 9 3.2.1 Test Mode Applicability and Tested Channel Detail ................................................................... 11 3.3 Duty Cycle of Test Signal .................................................................................................................... 13 3.4 Description of Support Units ............................................................................................................... 14 3.4.1 Configuration of System under Test ......................................................................................... 14 3.5 General Description of Applied Standards .......................................................................................... 14 4 Test Types and Results ............................................................................................................................ 15 4.1 Radiated Emission and Bandedge Measurement .............................................................................. 15 4.1.1 Limits of Radiated Emission and Bandedge Measurement ..................................................... 15 4.1.2 Limits of Unwanted Emission Out of the Restricted Bands ...................................................... 16 4.1.3 Test Instruments ....................................................................................................................... 17 4.1.4 Test Procedures .........................................................................................................…

Text truncated - open the document above for the full version.