K7SWIA007BoostCharge Pro Universal Easy Align Wireless Charging Pad 15W

Regulatory and Sustainability Information NORTH AMERICA Safety Instructions WARNING: Failure to follow these instructions could result in fire, electric shock, injury, or damage to the user, product, or other property. 1. Connect the power supply of the wireless charger into a power outlet that is close by and is easy to disconnect from. 2. Use indoors and in a dry location only; Avoid charging near sources of heat or humidity. 3. Keep the wireless charger and power supply away from any liquids or moisture. 4. Unplug the wireless charger when not in use for long periods of time. 5. Do not store your device in very hot or very cold locations. It is recommended to use your device at room temperature. 6. Do not use if visible defects are observed on the wireless charger or power supply. 7. Do not attempt to service, modify, or disassemble the wireless charger or power supply. 8. Use of a power supply not recommended or sold by Belkin may result in an increased risk of fire, electric shock, injury, or damage to the user, product, or other property. 9. Wireless charging power transmission rate is regulated by the wireless charging device receiving power which can be influenced by factors like, but not limited to, proprietary charging protocols, ambient temperature, current battery percentage level and age of the device being charged. CAUTION: If you experience problems with the wireless charger, please discontinue use, unplug the power supply from the socket, and contact Belkin for assistance. The marking information is located on the bottom of the apparatus. FCC Statement DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY We, Belkin International, Inc., of 555 S. Aviation Blvd., Suite 180, El Segundo, CA 90245, USA, Tel: +1(310) 751 5100, declare under our sole responsibility that this product complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the distance between the equipment and the receiver. • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. Innovation, Science, and Economic Development Canada Statement (ISED): This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. Radiation Exposure Statement: This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. Innovation, Science and Economic Development Canada Statement: This digital apparatus complies with CAN ICES-003(B) / NMB-003(B). FRANÇAIS AMÉRIQUE DU NORDZ Consignes de sécurité MISE EN GARDE : Le non-respect de ces instructions peut provoquer un incendie, une électrocution ou des blessures, ou endommager l’utilisateur, le produit ou d’autres biens. 1. Connecter l’alimentation du chargeur sans fil à une prise secteur proche de la source et facile à déconnecter de celle-ci. 2. Utiliser ce produit à l’intérieur et dans un endroit sec uniquement. Évitez de charger votre appareil près des sources de chaleur ou d’humidité. 3. Garder le chargeur sans fil et l’alimentation à l’abri de tout liquide ou de l’humidité. 4. Débrancher le chargeur sans fil quand vous ne l’utilisez pas pendant de longues périodes. 5. Ne pas stocker votre appareil dans un endroit très chaud ou très froid. Il est recommandé d’utiliser votre appareil à température ambiante. 6. Si vous remarquez des défauts visibles sur le chargeur sans fil ou l’alimentation, ne pas les utiliser. 7. Ne pas tenter de réparer, modifier ou démonter le chargeur sans fil ou l’alimentation. 8. L’utilisation d’une alimentation non recommandée ou non vendue par Belkin peut augmenter le risque d’incendie, d’électrocution, de blessure ou d’endommagement de l’utilisateur, du produit ou d’autres biens. 9. La vitesse de transmission de la puissance de charge sans fil est régulée par l’appareil de charge sans fil qui reçoit cette puissance. Cette vitesse peut subir des influences de divers facteurs comme, entre autres, les protocoles de charge propriétaires, la température ambiante, le niveau de charge actuel de la batterie, et l’âge de l’…

Text truncated - open the document above for the full version.

≥20W Power Delivery 3.0 8820bt03341 Rev. A00 BoostCharge Pro Universal Easy Align Wireless Charging Pad 15W Support universel de charge sans fil avec alignement facile 15 W Model /Modèle: WIA007 0.00 x 0.00 x 0.00 Business Unit: Program Manager: Packaging Engineer: Material: Blank Size (in): Side Shown: L x W x D (mm): DIE LAYOUT 0 Unit: Flute/Grain: REV Intermediate PRINT SIDE 0 x 0 x 0 L x W x D (in): Refer Artwork Refer Artwork Paper Platform Hanger must be folded in the case pack RC Statement P# Outer Refer Artwork BOM - WCA003 US APL Wafer Seal (2 pc) 25 mm FCC/Legal Statement 70 gsm Wood Free Paper QIG 70 gsm Wood Free Paper 3 3 / 8 [85.725] 23 5 / 8 [600.076] 3 3 / 4 [95.250] 7 [177.800] 3 1 / 4 [82.202] 9 3 / 4 [247.650] 3 1 / 4 [82.551] 16 11 / 32 [415.284] 4 [101.808] 1 3 / 4 [44.452] 8 1 / 2 [215.611] 4 [101.306] IN/MM Drawing Scale 1:1 Retail Outside Dimension (Including Hang Tab) DO NOT PRINT DIE LINES, PRINTERS NOTES PRINT SPECS: DIE/MATERIAL SPECS: 1516.034 x 395.290 59.686 x 15+9/16 Die Line File: Core Matthew Duffy 350gsm C1S SBS (20pt) IDL_WIN 222_15W WIRELESS CHARGING PAD WITH USB-C CABLE US Color Plates: Notes: Artwork File: horizontal 00 RELEASE DATE: 04/06/2023 Tolerance:+/- 1/32" - 0.8mm Blank Size (mm): Finish: DIELINE: THIS DOCUMENT & THE INFORMATION IN IT ARE THE CONFIDENTIAL PROPERTY OF BELKIN INTERNATIONAL AND MUST NOT BE COPIED, REPRODUCED OR USED IN ANY MANNER WITHOUT THE WRITTEN CONSENT OF BELKIN CORPORATION. IT MUST BE RETURNED UPON REQUEST This dieline works for following skus (if any): QSG_WIA007btBK_8830bt03341_Rev.A00_BoostChargePro_15W_easy_alignment_wireless_charging_pad_V1 GLOBAL PACKAGE OPERATIONS 792481 FILE NAME QSG_WIA007btBK_8830bt03341_Rev.A00_BoostChargePro_15W_easy_alignment_wireless_charging_pad_V1 SKU# WIA007btBK P# 8830bt03341 REV A00 DE- SIGNER Anny DAT E 05/23/23 11:18 AM VER- SION 01

Applicant: Belkin International, Inc. FCC ID: K7SWIA007 RF Exposure Requirements ( FCC KDB 680106 D01 v03r01) Requirements Statements (a) Power transfer frequency is less that 1 MHz The resonator system shall operate at 147.5kHz, 125kHz (b) Output power from each primary coil is less than 15 watts 15W (c) The transfer system includes only single primary and secondary coils. This includes charging systems that may have multiple primary coils and clients that are able to detect and allow coupling only between individual pairs of coils Single coil (d) Client device is inserted in or placed directly in contact with the transmitter Client device is placed directly in contact with the transmitter (e) Mobile exposure conditions only (portable exposure conditions are not covered by this exclusion). It’s mobile device, and had provided RF exposure report to evaluate. (f) The aggregate H-field strengths at 15 cm surrounding the device and 20 cm above the top surface from all simultaneous transmitting coils are demonstrated to be less than 50% of the MPE limit. Please refer to RF Exposure Report. ----------------------------------------- Name and Job Title: Zack Vogel, Sr. Regulatory Compliance Engineer E- mail: [email protected] Tel: +18002235546

Date: 2023-06-19 FCC ID: K7SWIA007 To the attention of Federal Communications Commission Authorization and Evaluation Division Attestation Statements Attestation Statements Part 2.911(d)(5)(i) Filing Belkin International, Inc. certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receivingan equipment authorization pursuant to section 2.903 of the FCC rules. Attestation Statements Part 2.911(d)(5)(ii) Filing Belkin International, Inc. certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely yours, ----------------------------------------- Name and Job Title: Zack Vogel, Sr. Regulatory Compliance Engineer E- mail: [email protected] Tel: +18002235546

U .S. Agent for Service of Process Attestation T o the attention of Federal Communications Commission Authorization and Evaluation Division Applicant / Designated U.S Agent Company Name: Belkin International, Inc. FRN: 0008128605 FCC ID: K7SWIA007 Contact Name: Jay Tu Address: 555 S Aviation Blvd. Suite 180 El Segundo, CA 90245 USA Telephone No: +1 310 633 9309 # 9142 Email: [email protected] This letter is to confirm that the Applicant has designated itself as the U.S Agent for service of process as required by §2.911(d)(7). The Applicant further acknowledges acceptance to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. A pplicant / U.S. Agent Signature: Date: 2023-06-19 Si gned by (printed name): Zack Vogel

Date: 2023-06-19 FCC ID: K7SWIA007 To the attention of Federal Communications Commission Authorization and Evaluation Division Permanent Confidentiality Request Request is hereby submitted by Belkin International, Inc to withhold permanently from public review certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) and 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept permanently confidential: Schematic(s) Block Diagram(s) Operational Description In addition we also request the following sections of the application are to be kept short term confidential for a period of 180 days from the date of Authorization: User manual Test setup photos External photos Internal photos Rationale for request for confidentiality: Belkin International, Inc has invested considerable time and materials in research and development to produce the referenced product. Disclosure of the permanently confidential portions of this application to competitors would give them significant competitive advantages in developing similar products. Disclosure of the short-term confidential portions of this application during the period of importation and/or distribution would reveal key aspects of proprietary technology to competitors and diminish the value of our investment in research and development. If you have questions or need further information, please contact the undersigned. Sincerely, ----------------------------------------- Name and Job Title: Zack Vogel, Sr. Regulatory Compliance Engineer E- mail: [email protected] Tel: +18002235546

Date: 2023-06-19 FCC ID: K7SWIA007 AUTHORIZATION LETTER To Whom It May Concern: Belkin International, Inc. hereby authorizes Andrea Hsia/ Supervisor of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (“BV CPS Taoyuan”), to act on its behalf in all matters relating to the Federal Communication Commission (“FCC”) application for equipment authorization in connection with the FCC ID listed above, including signing of all documents relating to these matters. Any and all acts carried out by Andrea Hsia/ Supervisor of BV CPS Taoyuan on Belkin International, Inc.‘s behalf, within the scope of the powers granted herein, shall have the same effect as acts of its own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Sincerely yours, ----------------------------------------- Name and Job Title: Zack Vogel, Sr. Regulatory Compliance Engineer E- mail: [email protected] Tel: +18002235546

Power of Attorney Date: January 6, 2022 To whom it may concern: I, the undersigned, Jay Tu, hereby authoriz e the person(s) listed below to act on behalf of me to sign all related documents for Belkin International, Inc.’s FCC/IC application. Name: Zack Vogel / Sr. Regulatory Compliance Engineer, Regulatory Compliance Tel: +1 800-223-5546 E-ma il: [email protected] Name: Rossi Wu / Senior Regulatory Compliance Engineer, Regulatory Compliance Tel: +1 310 633 9309 # 2960 E- mail: [email protected] Name: Daisy Dai / Regulatory Compliance Engineer, Regulatory Compliance Tel: O +86 755 2387 1039 E- mail: [email protected] Respectfully, Applicant’s company name: Belkin International, Inc. Applicant’s company address: 555 S. Aviation Blvd., Suite 180, El Segundo, CA 90245, USA Sign ature Name and Job Title: Jay Tu / Manager, Regulatory Compliance E- mail: Jay [email protected] Tel: +1 310 633 9309 # 9142

Reference No.:BGMK-WTW-P23050624_ExtPho Page 1/5 CONSTRUCTION PHOTOS OF EUT Reference No.:BGMK-WTW-P23050624_ExtPho Page 2/5 Reference No.:BGMK-WTW-P23050624_ExtPho Page 3/5 Reference No.:BGMK-WTW-P23050624_ExtPho Page 4/5 Reference No.:BGMK-WTW-P23050624_ExtPho Page 5/5

FCC ID: K7SWIA007 IC: 3623A-WIA007 Label Location Back of EUT

Label Location Bottom of the EUT FCC & IC ID permanently affixed by lase etching (size 1.8mm height) Model: WIA007 FCC ID: K7SWIA007 IC: 3623A-WIA007

Reference No.:BGMK-WTW-P23050624_IntPho Page 1/4 CONSTRUCTION PHOTOS OF EUT Reference No.:BGMK-WTW-P23050624_IntPho Page 2/4 Reference No.:BGMK-WTW-P23050624_IntPho Page 3/4 Reference No.:BGMK-WTW-P23050624_IntPho Page 4/4 Antenna

Report No.: MFBGMK-WTW-P23050624 Page No. 1 / 16 Report Format Version: 6.1.1 Reference No.: BGMK-WTW-P23050624 RF Exposure Test Report Report No.: MFBGMK-WTW-P23050624 FCC ID: K7SWIA007 Test Model: WIA007 Received Date: 2023/5/25 Test Date: 2023/6/12 ~ 2023/6/13 Issued Date: 2023/6/21 Applicant: Belkin International, Inc. Address: 555 S. Aviation Blvd., Suite 180, El Segundo, CA 90245-4852, USA Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan FCC Registration / Designation Number: 198487 / TW2021 This report is governed by, and incorporates by reference, the Conditions of Testing as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our-business/cps/about-us/terms-conditions/ and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. Statements of conformity are based on simple acceptance criteria without taking measurement uncertainty into account, unless otherwise requested in writing. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Report No.: MFBGMK-WTW-P23050624 Page No. 2 / 16 Report Format Version: 6.1.1 Reference No.: BGMK-WTW-P23050624 Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 General Information .............................................................................................................................. 5 2.1 General Description of EUT ................................................................................................................ 5 3 RF Exposure .......................................................................................................................................... 6 3.1 Description of Support Units ............................................................................................................... 6 3.1.1 Configuration of System Under Test .................................................................................................... 6 3.2 Test Setup ........................................................................................................................................... 7 3.3 Test Instruments .................................................................................................................................. 7 3.4 Limits for Maximum Permissible Exposure (MPE) .............................................................................. 8 3.5 Test Point Description ......................................................................................................................... 8 4 Measurement Result ............................................................................................................................. 9 5 Photographs of the Test Configuration ............................................................................................ 16 Report No.: MFBGMK-WTW-P23050624 Page No. 3 / 16 Report Format Version: 6.1.1 Reference No.: BGMK-WTW-P23050624 Release Control Record Issue No. Description Date Issued MFBGMK-WTW-P23050624 Original release 2023/6/21 Report No.: MFBGMK-WTW-P23050624 Page No. 4 / 16 Report Format Version: 6.1.1 Reference No.: BGMK-WTW-P23050624 1 Certificate of Conformity Product: BoostCharge Pro Universal Easy Align Wireless Charging Pad 15W Brand: belkin Test Model: WIA007 Sample Status: Engineering sample Applicant: Belkin International, Inc. Test Date: 2023/6/12 ~ 2023/6/13 Standards: FCC Part 2 (Section 2.1091) References Test Guidance: KDB 680106 D01 RF Exposure Wireless Charging v03r01 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s RF characteristics under the conditions specified in this report. Prepared by : , Date: 2023/6/21 Annie Chang / Senior Specialist Approved by : , Date: 2023/6/21 Jeremy Lin / Project Engineer Report No.: MFBGMK-WTW-P23050624 Page No. 5 / 16 Report Format Version: 6.1.1 Reference No.: BGMK-WTW-P23050624 2 General Information 2.1 General Description of EUT Product BoostCharge Pro Universal Easy Align Wireless Charging Pad 15W Brand belkin Test Model WIA007 Sample Status Engineering sample Power Supply Rating 12Vdc from adapter Modulation Type FSK Operating Frequency 147.5kHz, 125kHz Antenna Type Coil antenna Field Strength 7.6dBuV/m Dimensions 18.0864cm 2 (diameter…

Text truncated - open the document above for the full version.

Report No.: RFBGMK-WTW-P23050624 Page No. 1 / 50 Report Format Version: 6.1.1 Reference No.: BGMK-WTW-P23050624 FCC Test Report Report No.: RFBGMK-WTW-P23050624 FCC ID: K7SWIA007 Test Model: WIA007 Received Date: 2023/5/25 Test Date: 2023/5/29 ~ 2023/6/17 Issued Date: 2023/6/21 Applicant: Belkin International, Inc. Address: 555 S. Aviation Blvd., Suite 180, El Segundo, CA 90245-4852, USA Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan FCC Registration / Designation Number: 198487 / TW2021 This report is governed by, and incorporates by reference, the Conditions of Testing as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our-business/cps/about-us/terms-conditions/ and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. Statements of conformity are based on simple acceptance criteria without taking measurement uncertainty into account, unless otherwise requested in writing. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Report No.: RFBGMK-WTW-P23050624 Page No. 2 / 50 Report Format Version: 6.1.1 Reference No.: BGMK-WTW-P23050624 Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 Summary of Test Results ..................................................................................................................... 5 2.1 Measurement Uncertainty ................................................................................................................... 5 2.2 Modification Record ............................................................................................................................ 5 3 General Information .............................................................................................................................. 6 3.1 General Description of EUT ................................................................................................................ 6 3.2 Description of Test Modes ................................................................................................................... 6 3.2.1 Test Mode Applicability and Tested Channel Detail ............................................................................. 7 3.3 Description of Support Units ............................................................................................................... 8 3.3.1 Configuration of System under Test .................................................................................................... 8 3.4 General Description of Applied Standards .......................................................................................... 8 4 Test Types and Results ........................................................................................................................ 9 4.1 Radiated Emission and Bandedge Measurement ............................................................................... 9 4.1.1 Limits of Radiated Emission and Bandedge Measurement ................................................................ 9 4.1.2 Test Instruments ................................................................................................................................ 10 4.1.3 Test Procedures .................................................................................................................................. 11 4.1.4 Deviation from Test Standard ............................................................................................................. 11 4.1.5 Test Set Up ........................................................................................................................................ 12 4.1.6 EUT Operating Conditions ................................................................................................................. 12 4.1.7 Test Results ....................................................................................................................................... 13 4.2 Conducted Emission Measurement .................................................................................................. 37 4.2.1 Limits of Conducted Emission Measurement .................................................................................... 37 4.2.2 Test Instruments ................................................................................................................................ 37 4.2.3 Test Procedures ...............................................................................................…

Text truncated - open the document above for the full version.

Reference No.: MFBGMK-WTW-P23050624-TSup Page No. 1 / 15 PHOTOGRAPHS OF THE TEST CONFIGURATION Charging mode with Load (147.5kHz) E-Field and H-Field (Top_15cm) E-Field and H-Field (Bottom_15cm) Reference No.: MFBGMK-WTW-P23050624-TSup Page No. 2 / 15 E-Field and H-Field (Left_15cm) E-Field and H-Field (Right_15cm) Reference No.: MFBGMK-WTW-P23050624-TSup Page No. 3 / 15 E-Field and H-Field (Z-axis_15cm) E-Field and H-Field (Top_20cm) Reference No.: MFBGMK-WTW-P23050624-TSup Page No. 4 / 15 E-Field and H-Field (Bottom_20cm) E-Field and H-Field (Left_20cm) Reference No.: MFBGMK-WTW-P23050624-TSup Page No. 5 / 15 E-Field and H-Field (Right_20cm) E-Field and H-Field (Z-axis_20cm) Reference No.: MFBGMK-WTW-P23050624-TSup Page No. 6 / 15 Charging mode with iPhone (147.5kHz) E-Field and H-Field (Top_15cm) E-Field and H-Field (Bottom_15cm) Reference No.: MFBGMK-WTW-P23050624-TSup Page No. 7 / 15 E-Field and H-Field (Left_15cm) E-Field and H-Field (Right_15cm) Reference No.: MFBGMK-WTW-P23050624-TSup Page No. 8 / 15 E-Field and H-Field (Z-axis_15cm) E-Field and H-Field (Top_20cm) Reference No.: MFBGMK-WTW-P23050624-TSup Page No. 9 / 15 E-Field and H-Field (Bottom_20cm) E-Field and H-Field (Left_20cm) Reference No.: MFBGMK-WTW-P23050624-TSup Page No. 10 / 15 E-Field and H-Field (Right_20cm) E-Field and H-Field (Z-axis_20cm) Reference No.: MFBGMK-WTW-P23050624-TSup Page No. 11 / 15 Standby mode (147.5kHz+125kHz) E-Field and H-Field (Top_15cm) E-Field and H-Field (Bottom_15cm) Reference No.: MFBGMK-WTW-P23050624-TSup Page No. 12 / 15 E-Field and H-Field (Left_15cm) E-Field and H-Field (Right_15cm) Reference No.: MFBGMK-WTW-P23050624-TSup Page No. 13 / 15 E-Field and H-Field (Z-axis_15cm) E-Field and H-Field (Top_20cm) Reference No.: MFBGMK-WTW-P23050624-TSup Page No. 14 / 15 E-Field and H-Field (Bottom_20cm) E-Field and H-Field (Left_20cm) Reference No.: MFBGMK-WTW-P23050624-TSup Page No. 15 / 15 E-Field and H-Field (Right_20cm) E-Field and H-Field (Z-axis_20cm)

Reference No.: RFBGMK-WTW-P23050624-TSup Page No. 1 / 9 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST (Mode A) Reference No.: RFBGMK-WTW-P23050624-TSup Page No. 2 / 9 CONDUCTED EMISSION TEST (Mode B) Reference No.: RFBGMK-WTW-P23050624-TSup Page No. 3 / 9 CONDUCTED EMISSION TEST (Mode C) Reference No.: RFBGMK-WTW-P23050624-TSup Page No. 4 / 9 RADIATED EMISSION TEST (Mode A) <Frequency Range below 30MHz> Reference No.: RFBGMK-WTW-P23050624-TSup Page No. 5 / 9 RADIATED EMISSION TEST (Mode B) <Frequency Range below 30MHz> Reference No.: RFBGMK-WTW-P23050624-TSup Page No. 6 / 9 RADIATED EMISSION TEST (Mode C) <Frequency Range below 30MHz> Reference No.: RFBGMK-WTW-P23050624-TSup Page No. 7 / 9 RADIATED EMISSION TEST (Mode A) <Frequency Range above 30MHz> Reference No.: RFBGMK-WTW-P23050624-TSup Page No. 8 / 9 RADIATED EMISSION TEST (Mode B) <Frequency Range above 30MHz> Reference No.: RFBGMK-WTW-P23050…

Text truncated - open the document above for the full version.