K7SWIA008BoostCharge Pro Convertible Magnetic Charging Stand

Regulatory and Sustainability Information Safety Instructions WARNING: Failure to follow these instructions could result in fire, electric shock, injury, or damage to the user, product, or other property. 1. Connect the power supply of the wireless charger into a power outlet that is close by and is easy to disconnect from. 2. Use indoors and in a dry location only; Avoid charging near sources of heat or humidity. 3. Keep the wireless charger and power supply away from any liquids or moisture. 4. Unplug the wireless charger when not in use for long periods of time. 5. Do not store your device in very hot or very cold locations. It is recommended to use your device at room temperature. 6. Do not use if visible defects are observed on the wireless charger or power supply. 7. Do not attempt to service, modify, or disassemble the wireless charger or power supply. 8. Use of a power supply not recommended or sold by Belkin may result in an increased risk of fire, electric shock, injury, or damage to the user, product, or other property. 9. Wireless charging power transmission rate is regulated by the wireless charging device receiving power which can be influenced by factors like, but not limited to, proprietary charging protocols, ambient temperature, current battery percentage level and age of the device being charged. CAUTION: If you experience problems with the wireless charger, please discontinue use, unplug the power supply from the socket, and contact Belkin for assistance. The marking information is located on the bottom of the apparatus. FCC Statement DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY We, Belkin International, Inc., of 555 S. Aviation Blvd., Suite 180, El Segundo, CA 90245, USA, Tel: +1(310) 751 5100, declare under our sole responsibility that this product complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Federal Communications Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the distance between the equipment and the receiver. • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. Innovation, Science, and Economic Development Canada Statement (ISED): This device contains licence-exempt transmitter(s)/ receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. Radiation Exposure Statement: This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. Innovation, Science and Economic Development Canada Statement: This digital apparatus complies with CAN ICES- 003(B) / NMB-003(B). FRANÇAIS AMÉRIQUE DU NORDZ Consignes de sécurité MISE EN GARDE : Le non-respect de ces instructions peut provoquer un incendie, une électrocution ou des blessures, ou endommager l’utilisateur, le produit ou d’autres biens. 1. Connecter l’alimentation du chargeur sans fil à une prise secteur proche de la source et facile à déconnecter de celle-ci. 2. Utiliser ce produit à l’intérieur et dans un endroit sec uniquement. Évitez de charger votre appareil près des sources de chaleur ou d’humidité. 3. Garder le chargeur sans fil et l’alimentation à l’abri de tout liquide ou de l’humidité. 4. Débrancher le chargeur sans fil quand vous ne l’utilisez pas pendant de longues périodes. 5. Ne pas stocker votre appareil dans un endroit très chaud ou très froid. Il est recommandé d’utiliser votre appareil à température ambiante. 6. Si vous remarquez des défauts visibles sur le chargeur sans fil ou l’alimentation, ne pas les utiliser. 7. Ne pas tenter de réparer, modifier ou démonter le chargeur sans fil ou l’alimentation. 8. L’utilisation d’une alimentation non recommandée ou non vendue par Belkin peut augmenter le risque d’incendie, d’électrocution, de blessure ou d’endommagement de l’utilisateur, du produit ou d’autres biens. 9. La vitesse de transmission de la puissance de charge sans fil est régulée par l’appareil de charge sans fil qui reçoit cette puissance. Cette vitesse peut subir des influences de divers facteurs comme, entre autres, les protocoles de charge propriétaires, la température ambiante, le niveau de charg…

Text truncated - open the document above for the full version.

70707070 BoostCharge Pro Convertible Magnetic Charging Stand Support de recharge magnétique et pliable SKU/Model: WIA008 SKU/Modèle : WIA008 USB-C ≥ 20W 8820bt01819 Rev. A00 80 GSM WOODFREE PAPER QSG 3 11 / 32 [84.931] 2 17 / 32 [64.294] GLOBAL PACKAGE OPERATIONS 845729 FILE NAME QSG_WIA008xx_8820bt01819Rev.A00_BoostCharge_Pro_Convertible Magnetic Charging Stand SKU# WIA008XX P# 8820bt01819 REV A00 DESIGNER Anny DAT E 11/16/23 4:28 PM VERSION 02 .2" .2" .2" .2".2".2".2" .2".2".2".2" .2".2" .2".2".2".2" .2".2".2".2" .2".2"

Date: 2023-12-28 FCC ID: K7SWIA008 To the attention of Federal Communications Commission Authorization and Evaluation Division Attestation Statements Attestation Statements Part 2.911(d)(5)(i) Filing Belkin International, Inc. certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receivingan equipment authorization pursuant to section 2.903 of the FCC rules. Attestation Statements Part 2.911(d)(5)(ii) Filing Belkin International, Inc.certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely yours, ----------------------------------------------- Zack Vogel, Sr. Regulatory Compliance Engineer Belkin International, Inc. Tel: +1 310 751 2800 E- mail: [email protected]

U.S. Agent for Service of Process Attestation To the attention of Federal Communications Commission Authorization and Evaluation Division Applicant / Designated U.S Agent Company Name: Belkin International, Inc. FRN: 0008128605 Grantee code: K7S Contact Name: Jay Tu Address: 555 S Aviation Blvd. Suite 180 El Segundo, CA 90245 USA Telephone No: +1 310 633 9309 # 9142 Email: [email protected] This letter is to confirm that the Applicant has designated itself as the U.S Agent for service of process as required by §2.911(d)(7). The Applicant further acknowledges acceptance to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Applicant / U.S. Agent Signature: Date: 2023-12-28 Signed by (printed name): Zack Vogel

Date: 2023-12 -28 FCC ID: K7SWIA008 To the attention of Federal Communications Commission Authorization and Evaluation Division Permanent Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: Schematics Block Diagram Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely yours, ----------------------------------- Zack Vogel, Sr. Regulatory Compliance Engineer Belkin International, Inc. Tel: +1 310 751 2800 E- mail: [email protected]

Date: 2023-12-28 FCC ID: K7SWIA008 AUTHORIZATION LETTER To Whom It May Concern: Belkin International, Inc. hereby authorizesTilly Nien / Specialist of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch(“BV CPS Taoyuan”),to act on its behalf in all matters relating to the Federal Communication Commission (“FCC”) application for equipment authorization in connection with the FCC ID listed above, including signing of all documents relating to these matters. Any and all acts carried out by Tilly Nien / Specialist of BV CPS Taoyuanon Belkin International, Inc.’s behalf, within the scope of the powers granted herein, shall have the same effect as acts of its own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Sincerely yours, ----------------------------------------------- Zack Vogel, Sr. Regulatory Compliance Engineer Belkin International, Inc. Tel: +1 310 751 2800 E-mail: [email protected]

Power of Attorney Date: January 6, 2022 To whom it may concern: I, the undersigned, Jay Tu, hereby authoriz e the person(s) listed below to act on behalf of me to sign all related documents for Belkin International, Inc.’s FCC/IC application. Name: Zack Vogel / Sr. Regulatory Compliance Engineer, Regulatory Compliance Tel: +1 800-223-5546 E-ma il: [email protected] Name: Rossi Wu / Senior Regulatory Compliance Engineer, Regulatory Compliance Tel: +1 310 633 9309 # 2960 E- mail: [email protected] Name: Daisy Dai / Regulatory Compliance Engineer, Regulatory Compliance Tel: O +86 755 2387 1039 E- mail: [email protected] Respectfully, Applicant’s company name: Belkin International, Inc. Applicant’s company address: 555 S. Aviation Blvd., Suite 180, El Segundo, CA 90245, USA Sign ature Name and Job Title: Jay Tu / Manager, Regulatory Compliance E- mail: Jay [email protected] Tel: +1 310 633 9309 # 9142

Reference No.: BCBS-WTW-P23110287_EXT Page 1/14 CONSTRUCTION PHOTOS OF EUT Color: Black Adapter (Option) Reference No.: BCBS-WTW-P23110287_EXT Page 2/14 Reference No.: BCBS-WTW-P23110287_EXT Page 3/14 Reference No.: BCBS-WTW-P23110287_EXT Page 4/14 Reference No.: BCBS-WTW-P23110287_EXT Page 5/14 Reference No.: BCBS-WTW-P23110287_EXT Page 6/14 Reference No.: BCBS-WTW-P23110287_EXT Page 7/14 Reference No.: BCBS-WTW-P23110287_EXT Page 8/14 Reference No.: BCBS-WTW-P23110287_EXT Page 9/14 Reference No.: BCBS-WTW-P23110287_EXT Page 10/14 Reference No.: BCBS-WTW-P23110287_EXT Page 11/14 Color: White Reference No.: BCBS-WTW-P23110287_EXT Page 12/14 Adapter (Option) Reference No.: BCBS-WTW-P23110287_EXT Page 13/14 Accessory devices: Type C to Type C USB Cable Reference No.: BCBS-WTW-P23110287_EXT Page 14/14

Reference No.: BCBS-WTW-P23110287_INT Page 1/7 CONSTRUCTION PHOTOS OF EUT Reference No.: BCBS-WTW-P23110287_INT Page 2/7 Reference No.: BCBS-WTW-P23110287_INT Page 3/7 Reference No.: BCBS-WTW-P23110287_INT Page 4/7 Coil Antenna 1195mm 2 (Diameter=39mm) Reference No.: BCBS-WTW-P23110287_INT Page 5/7 Reference No.: BCBS-WTW-P23110287_INT Page 6/7 Reference No.: BCBS-WTW-P23110287_INT Page 7/7

Report No.: MFBCBS-WTW-P23110287 Page No. 1/ 22Report Format Version: 6.1.1 RF Exposure Report Report No.:MFBCBS-WTW-P23110287 FCC ID:K7SWIA008 Test Model:WIA008 Received Date:Nov. 10, 2023 Test Date:Nov. 21 ~ Nov. 22, 2023 Issued Date:Jan. 02, 2024 Applicant:Belkin International, Inc. Address:555 S. Aviation Blvd., Suite 180, El Segundo, CA 90245, USA Issued By:Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address:No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location:No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, TAIWAN FCC Registration / Desi gnation Number: 788550 / TW0003 This report is governed by, and incorporates by reference, the Conditions of Testing as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our-business/cps/about-us/terms-conditions/ and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. Statements of conformity are based on simple acceptance criteria without taking measurement uncertainty into account, unless otherwise requested in writing. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Report No.: MFBCBS-WTW-P23110287 Page No. 2/ 22Report Format Version: 6.1.1 Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 General Information .............................................................................................................................. 5 2.1 General Description of EUT ................................................................................................................ 5 2.2 Description of Test Modes ................................................................................................................... 6 3 RF Exposure .......................................................................................................................................... 7 3.1 Description of Support Units ............................................................................................................... 7 3.1.1 Configuration of System under Test .................................................................................................... 8 3.2 Test Setup ........................................................................................................................................... 9 3.3 Test Instruments .................................................................................................................................. 9 3.4 Limits for Maximum Permissible Exposure (MPE) ............................................................................ 10 3.5 Test Point Description ........................................................................................................................ 11 4. Calculation Result of Maximum Conducted Power ......................................................................... 12 5. Photographs of the Test Configuration ............................................................................................ 22 Report No.: MFBCBS-WTW-P23110287 Page No. 3/ 22Report Format Version: 6.1.1 Release Control Record Issue No. Description Date Issued MFBCBS-WTW-P23110287 Original release Jan. 02, 2024 Report No.: MFBCBS-WTW-P23090428 Page No. 4 / 22Report Format Version: 6.1.1 1 Certificate of Conformity Product: BoostCharge Pro Convertible Magnetic Charging Stand Brand: belkin Test Model: WIA008 Sample Status: Engineering sample Applicant: Belkin International, Inc. Test Date: Nov. 21 ~ Nov. 22, 2023 FCC Rule Part: FCC Part 1 (Section 1.1307(b), Section 1.1310) FCC Part 2 (Section 2.1091) Standards: KDB 680106 D01 RF Exposure Wireless Charging Apps v04 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s RF characteristics under the conditions specified in this report. Prepared by : , Date:Jan. 02, 2024 Polly Chien / Specialist Approved by : , Date:Jan. 02, 2024 Jeremy Lin / Project Engineer Report No.: MFBCBS-WTW-P23090428 Page No. 5 / 22Report Format Version: 6.1.1 2 General Information 2.1 General Description of EUT Product BoostCharge Pro Convertible Magnetic Charging Stand Brand belkin Test Model WIA008 Sample Status Engineering sample Power Supply Rating 5 or 3.3-5.9 or 3.3-11.0 or 9 or 12 Vdc(adapter) Modulation Type FSK Operating Frequency 127.7kHz for iP…

Text truncated - open the document above for the full version.

Report No.: RFBCBS-WTW-P23110287 Page No. 1/ 51Report Format Version: 6.1.1 FCC Test Report Report No.:RFBCBS-WTW-P23110287 FCC ID:K7SWIA008 Test Model:WIA008 Received Date:Nov. 10, 2023 Test Date:Nov. 21 ~ Dec. 06, 2023 Issued Date:Jan. 02, 2024 Applicant:Belkin International, Inc. Address:555 S. Aviation Blvd., Suite 180, El Segundo, CA 90245, USA Issued By:Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address:No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location:No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, TAIWAN FCC Registration / Desi gnation Number: 788550 / TW0003 This report is governed by, and incorporates by reference, the Conditions of Testing as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our-business/cps/about-us/terms-conditions/ and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. Statements of conformity are based on simple acceptance criteria without taking measurement uncertainty into account, unless otherwise requested in writing. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Report No.: RFBCBS-WTW-P23110287 Page No. 2/ 51Report Format Version: 6.1.1 Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 Summary of Test Results ..................................................................................................................... 5 2.1 Measurement Uncertainty ................................................................................................................... 5 2.2 Modification Record ............................................................................................................................ 5 3 General Information .............................................................................................................................. 6 3.1 General Description of EUT ................................................................................................................ 6 3.2 Description of Test Modes ................................................................................................................... 7 3.2.1 Test Mode Applicability and Tested Channel Detail ............................................................................. 8 3.3 Description of Support Units ............................................................................................................. 10 3.3.1 Configuration of System under Test .................................................................................................. 10 3.4 General Description of Applied Standards ......................................................................................... 11 4 Test Types and Results ...................................................................................................................... 12 4.1 Radiated Emission and Bandedge Measurement ............................................................................. 12 4.1.1 Limits of Radiated Emission and Bandedge Measurement .............................................................. 12 4.1.2 Test Instruments ................................................................................................................................ 13 4.1.3 Test Procedures ................................................................................................................................. 14 4.1.4 Deviation from Test Standard ............................................................................................................ 14 4.1.5 Test Set Up ........................................................................................................................................ 15 4.1.6 EUT Operating Conditions ................................................................................................................. 15 4.1.7 Test Results ....................................................................................................................................... 16 4.2 Conducted Emission Measurement .................................................................................................. 36 4.2.1 Limits of Conducted Emission Measurement .................................................................................... 36 4.2.2 Test Instruments ................................................................................................................................ 36 4.2.3 Test Procedures ..................................................................................…

Text truncated - open the document above for the full version.

Reference No..: BCBS-WTW-P23110287 -1 _FCC_TSupPage No. 1/ 12 PHOTOGRAPHS OF THE TEST CONFIGURATION Charging Mode Test Mode A (Left: 20cm) Test Mode A (Right: 20cm) Reference No..: BCBS-WTW-P23110287 -1 _FCC_TSupPage No. 2/ 12 Test Mode A (Top: 20cm) Test Mode A (Bottom: 20cm) Reference No..: BCBS-WTW-P23110287 -1 _FCC_TSupPage No. 3/ 12 Test Mode A (Z-axis_Above: 20cm) Test Mode A (Z-axis_Below: 20cm) Reference No..: BCBS-WTW-P23110287 -1 _FCC_TSupPage No. 4/ 12 Test Mode B (Left: 20cm) Test Mode B (Right: 20cm) Reference No..: BCBS-WTW-P23110287 -1 _FCC_TSupPage No. 5/ 12 Test Mode B (Top: 20cm) Test Mode B (Bottom: 20cm) Reference No..: BCBS-WTW-P23110287 -1 _FCC_TSupPage No. 6/ 12 Test Mode B (Z-axis_Above: 20cm) Test Mode B (Z-axis_Below: 20cm) Reference No..: BCBS-WTW-P23110287 -1 _FCC_TSupPage No. 7/ 12 Test Mode C (Left: 20cm) Test Mode C (Right: 20cm) Reference No..: BCBS-WTW-P23110287 -1 _FCC_TSupPage No. 8/ 12 Test Mode C (Top: 20cm) Test Mode C (Bottom: 20cm) Reference No..: BCBS-WTW-P23110287 -1 _FCC_TSupPage No. 9/ 12 Test Mode C (Z-axis_Above: 20cm) Test Mode C (Z-axis_Below: 20cm) Reference No..: BCBS-WTW-P23110287 -1 _FCC_TSupPage No. 10/ 12 Standby Mode Test Mode D (Left: 20cm) Test Mode D (Right: 20cm) Reference No..: BCBS-WTW-P23110287 -1 _FCC_TSupPage No. 11/ 12 Test Mode D (Top: 20cm) Test Mode D (Bottom: 20cm) Reference No..: BCBS-WTW-P23110287 -1 _FCC_TSupPage No. 12/ 12 Test Mode D (Z-axis_Above: 20cm) Test Mode D (Z-axis_Below: 20cm)

Reference No.: BCBS-WTW-P23110287 _FCC_TSup Page No. 1/ 12 PHOTOGRAPHS OF THE TEST CONFIGURATION Conducted Emission Test Test Mode A Reference No.: BCBS-WTW-P23110287 _FCC_TSup Page No. 2/ 12 Conducted Emission Test Test Mode B Reference No.: BCBS-WTW-P23110287 _FCC_TSup Page No. 3/ 12 Conducted Emission Test Test Mode C Reference No.: BCBS-WTW-P23110287 _FCC_TSup Page No. 4/ 12 Conducted Emission Test Test Mode D Reference No.: BCBS-WTW-P23110287 _FCC_TSup Page No. 5/ 12 Radiated Emission Test (9kHz ~ 30MHz) Test Mode A Reference No.: BCBS-WTW-P23110287 _FCC_TSup Page No. 6/ 12 Radiated Emission Test (9kHz ~ 30MHz) Test Mode B Reference No.: BCBS-WTW-P23110287 _FCC_TSup Page No. 7/ 12 Radiated Emission Test (9kHz ~ 30MHz) Test Mode C Reference No.: BCBS-WTW-P23110287 _FCC_TSup Page No. 8/ 12 Radiated Emission Test (9kHz ~ 30MHz) Test Mode D Reference No.: BCBS-WTW-P23110287 _FCC_TSup Page No. 9/ 12 Radiated Emission Test (30MHz ~ 1GHz) Test Mode A Reference No.: BCBS-WTW-P23110287 _FCC_TSup Page No. 10/ 12 Radiated Emission Test (30MHz ~ 1GHz) Test Mode B Reference No.: BCBS-WTW-P23110287 _FCC_TSup Page No. 11/ 12 Radiated Emission Test (30MHz ~ 1GHz) Test Mode C Reference No.: BCBS-WTW-P23110287 _FCC_TSup Page No. 12/ 12 Radiated Emission Test (30MHz ~ 1GHz) Test Mode D