K7SWIB001Wireless Charging Stand 10W

127.00 x 57.15 x 177.80 Business Unit: Program Manager: Packaging Engineer: Material: Blank Size (in): Side Shown: L x W x D (mm): DIE LAYOUT 0 Unit: Flute/Grain: REV Intermediate PRINT SIDE 5 x 2+1/4 x 7 L x W x D (in): Nitto Tape Screen Glue 182.78 [7+3/16] 98.42 [3+7/8] P# 25 mm Hanger folded in the case pack PET 0.5 mm 34.29 [1+11/32] QIG/FCC Statement 70 gsm Woodfree paper Back Front 571.5 [22+1/2] 95.25 [3+3/4] 220.22 [8+21/32] 110.11 [4+11/32] 292.93 [11+17/32] 350 GSM C1S 487.28 [19+3/16] 131.76 [5+3/16] 101.6 [4] QIG/FCC Statement Card Refer Artwork SBS Insert Outer box Wafer seal (2pcs) Refer Artwork BOM - PW0005, WIB001 PET Hanger 7100-00267 Rev.A00 Refer Artwork IN/MM Drawing Scale 1:1 Retail Outside Dimension (Including Hang Tab) DO NOT PRINT DIE LINES, PRINTERS NOTES PRINT SPECS: DIE/MATERIAL SPECS: 1417.277 x 487+9/32 55.798 x 19.184 Die Line File: Core Matthew Duffy 350gsm C1S SBS (20pt) IDL_PW0005_WIB001_WIN204 10W WIRELESS CHARGING STAND W_W-OUT PSU Color Plates: Notes: Artwork File: horizontal 00 RELEASE DATE: 11/14/2019 Tolerance:+/- 1/32" - 0.8mm Blank Size (mm): Finish: DIELINE: THIS DOCUMENT & THE INFORMATION IN IT ARE THE CONFIDENTIAL PROPERTY OF BELKIN INTERNATIONAL AND MUST NOT BE COPIED, REPRODUCED OR USED IN ANY MANNER WITHOUT THE WRITTEN CONSENT OF BELKIN CORPORATION. IT MUST BE RETURNED UPON REQUEST This dieline works for following skus (if any): Safety Instructions: 1. Please read these instructions before using the device to ensure safe and proper use. 2. Connect the wall adapter of the wireless charging stand into a socket outlet that is close by and is easy to disconnect from the source. 3. Use indoors and in a dry location only; keep away from wet or damp locations. 4. Keep wireless charging stand and wall adapter away from any liquids or moisture. 5. Unplug the wireless charging stand when unused for long periods of time. 6. Do not store your device in very hot or very cold areas. It is recommended to use your device at room temperatures. 7. Caution: If you experience problems with the wireless charging stand, please discontinue use, unplug the wall adapter of the wireless charging stand from the AC socket, and contact Belkin for assistance. 8. Do not use if visible defects are observed on the wireless charging stand or wall adapter. Do not attempt to service or disassemble. WARRANTY AND SUPPORT INFORMATION IMPORTANT! PLEASE RETAIN PROOF OF PURCHASE AND PRODUCT WARRANTY INFORMATION BELKIN PRODUCT AND CONNECTED EQUIPMENT LIMITED WARRANTY (CONNECTED EQUIPMENT WARRANTY NOT AVAILABLE IN LATIN AMERICA) This warranty is provided to you by Belkin International, Inc, or one of its subsidiaries or affiliates (“Belkin”) IMPORTANT NOTICE REGARDING YOUR CONSUMER RIGHTS The benefits we give in this manufacturer’s warranty are additional to any rights and remedies that you may have under local consumer protection laws. Nothing in this warranty limits or affects your legal rights. This manufacturer’s warranty is governed by the laws of the country in which you purchased your Belkin product. In many countries, consumers have rights under local consumer laws. Those consumer rights may differ between countries, states and provinces, and often cannot be excluded. Your local consumer rights organization can advise you on your legal rights. This manufacturer’s warranty is not intended to: • change or exclude any rights under consumer law that cannot be lawfully changed or excluded; or • limit or exclude any right you have against the person who sold the Belkin product to you if that person has breached their sales contract with you. WHAT DOES THIS WARRANTY COVER? Product Warranty: Belkin warrants that the product hardware and any software media (i.e., media on which the product software is provided) will be free from defects in materials and workmanship under normal use during the Warranty Period described below. This means that the product won’t be defective, and that it will look and work as advertised during the relevant period. Connected Equipment Warranty: Belkin also covers damage to any equipment which is connected through the Belkin product to a properly wired AC power line with protective ground (Connected Equipment) caused by failure of the Belkin product to operate as described in the product documentation and arising as a result of impulses from lightning, or other power transients, or by momentary (less than 1ms) voltage surges or spikes (an Occurrence) during the Warranty Period (Connected Equipment Warranty). The Connected Equipment Warranty will not apply if damage to the Connected Equipment resulted from: • telephone-line transients if the Connected Equipment was not properly connected to or was not directly connected to a Belkin product that offers telephone-line transient protection; • coaxial-line transients if the Connected Equipment was not properly connected to or was not directly connected to a Belkin product that offers coaxial-line transient protection; or • network-line transients if the Connected Equipment was not properly connected to or was not directly connected to a Belkin product that offers network-line transient protection. The Connected Equipment Warranty will remain effective for the Warranty Period set out below. The Connected Equipment Warranty automatically ends when the Product Warranty ends. This warranty does not apply to products purchased from a source other than Belkin or a Belkin Authorized Reseller. How long is the product warranted and what is the maximum value of the Connected Equipment Warranty? Belkin warrants that the hardware in this Belkin product, and any associated software media, will be free from defects in materials and workmanship under normal use during the Warranty Period. The Warranty Period begins on the date the product was purchased by the original end-user purchaser and lasts for the period set out in the table below. Belkin’s total liability under the Connected Equipment Warranty shall not exceed the maxi…

Text truncated - open the document above for the full version.

Operating Instructions Please read these instructions before using the device to ensure safe and proper use. 2 • Coloca tu smartphone de tal manera que su centro quede alineado con el del soporte. 3 • La luz LED informará sobre el estado de la carga según se muestra en la siguiente tabla. EstadoLED Inicio (Encendido)1 parpadeo en color blanco En esperaInactivo/Apagado CargandoBlanco fijo Cargado completamenteBlanco fijo ErrorÁmbar fijo FOD (Foreign object detected)Ámbar fijo Fuente de energía insuficienteÁmbar fijo Error de temperaturaÁmbar fijo 4 • La función FOD (Foreign Object Detection o Detección de Objetos Extraños) te alertará de la presencia de objetos sobre el cargador inalámbrico, como unas llaves o unas monedas, que podrían afectar a la carga. FOD ayuda a prevenir que el cargador emita innecesariamente corriente o calor que podría dañar tu smartphone y otros objetos sensibles a las altas temperaturas. Colocar soportes magnéticos, fundas metálicas, llaves, monedas u otro tipo de objetos entre el teléfono y el cargador puede reducir su rendimiento o dañar las franjas magnéticas o los chips RFID (como los incluidos en algunas tarjetas de crédito, pases de seguridad o pasaportes). Si tienes uno de estos objetos sensibles metido en la funda del teléfono retíralo antes de iniciar la carga o asegúrate de que no está colocado entre el teléfono y el cargador. Instrucciones de seguridad adicionales 1. Usar solo en interiores y en lugares secos y sin humedad; mantener lejos de ubicaciones mojadas o con humedad. 2. Mantener el soporte de carga inalámbrica y el adaptador de pared lejos de líquidos y humedades. 3. Desenchufar el soporte de carga inalámbrica cuando no se vaya a utilizar durante largos periodos de tiempo. 4. No guardar el dispositivo en áreas muy frías o muy calientes. Se recomienda utilizar el dispositivo a temperatura ambiente. 5. Precaución: si tienes problemas con el soporte de carga inalámbrica deja de usarlo inmediatamente, desenchufa el adaptador de pared de la toma de corriente de CA y ponte en contacto con Belkin para obtener asistencia técnica. 6. No usar el soporte de carga inalámbrica si este o el adaptador de pared presentan defectos visibles. No intentar reparar el dispositivo ni desmontarlo. ITALIANO SUPPORTO DI RICARICA WIRELESS DA 10 W CODICE SKU/MODELLO: WIB001 Istruzioni d’uso Leggere attentamente le presenti istruzioni prima di utilizzare il dispositivo, per assicurarsi di utilizzarlo in modo sicuro e corretto. 1 • Il supporto di ricarica wireless richiede un alimentatore da muro da 18W (9V / 2 A), non incluso. • Si consiglia di utilizzare esclusivamente un alimentatore da muro Belkin o fornito dal produttore del proprio smartphone (quali Samsung, LG, Apple ecc.). Evitare di utilizzare altri caricabatterie, la cui qualità non può essere garantita. • L’alimentatore da muro deve fornire almeno 18W (9V/2 A) di potenza. Il collegamento ad un hub USB, computer, laptop o alimentatore USB da muro con potenza insufficiente risulterà in assenza di ricarica o tempi di ricarica molto lenti. • Collegare l’alimentatore da muro del supporto di ricarica wireless a una presa di corrente vicina e facile da scollegare dall’alimentazione principale. 2 • Posizionare la parte centrale dello smartphone in corrispondenza della parte centrale del supporto. 3 • L’indicatore LED indica lo stato della ricarica, come riportato nella tabella che segue. StatoLED Accensione (Alimentazione On)Bianco lampeggiante 1 volta StandbySpento/Off RicaricaBianco fisso Piena caricaBianco fisso ErroreArancione fisso Rilevamento di oggetti estranei (FOD)Arancione fisso Fonte di alimentazione insufficienteArancione fisso Errore temperaturaArancione fisso 4 • Il rilevamento di oggetti estranei (Foreign object detection, FOD in inglese) comunica la presenza di oggetti, quali chiavi o monete, sul caricabatteria wireless che potrebbero influenzare la ricarica. Il rilevamento di oggetti estranei aiuta a prevenire che il caricabatteria possa erogare alimentazione o trasmettere calore, che potrebbero danneggiare lo smartphone e altri oggetti sensibili al calore. Il posizionamento di supporti magnetici, custodie in metallo, chiavi, monete o altri oggetti tra lo smartphone e il caricabatteria potrebbe ridurre le prestazioni o danneggiare le strisce magnetiche o i chip RFID come quelli integrati in alcuni badge di sicurezza, carte di credito e passaporti. Se nella custodia è presente uno di questi oggetti sensibili, rimuoverlo prima di effettuare la ricarica o accertarsi che non si trovi sul retro del telefono, a contatto con il caricabatteria. Istruzioni di sicurezza supplementari 1. Utilizzare esclusivamente in luoghi coperti e asciutti; mantenere lontano da luoghi a contatto con acqua o umidità. 2. Mantenere il supporto di ricarica wireless e l’alimentatore da muro al riparo da qualsiasi liquido o ambiente umido. 3. Scollegare il supporto di ricarica wireless in caso di non utilizzo per un lungo periodo. 4. Non custodire il dispositivo in luoghi troppo caldi o troppo freddi. Si consiglia di utilizzare il dispositivo a temperatura ambiente. 5. Attenzione: qualora si verificassero dei problemi con il supporto di ricarica wireless, interromperne l’utilizzo, scollegare l’alimentatore da muro del supporto di ricarica wireless dalla presa CA e contattare Belkin per ricevere assistenza. 6. Non utilizzare il prodotto in caso siano visibili danni o difetti sul supporto di ricarica wireless o l’alimentatore da muro. Non tentare di smontare o riparare l’unità. PORTUGUÊS SUPORTE DE CARREGAMENTO SEM FIO DE 10W Unidade de manutenção de estoque (SKU)/MODELO: WIB001 Instruções de operação Leia as instruções antes de utilizar o aparelho para fazer uso seguro e correto. 1 • O suporte de carregamento sem fio precisa de um adaptador de parede de 18W (9V/2 A), que não está incluído. • É recomendável utilizar um adaptador de parede fornecido pela Belkin ou pelo fabricante do seu smartphone (como Samsung, LG, Apple etc.). Evite o …

Text truncated - open the document above for the full version.

Date: 2020-01-10 FCC ID: K7SWIB001 To the attention of Federal Communications Commission Authorization and Evaluation Division Permanent Confidentiality Request Request is hereby submitted by Belkin International, Inc to withhold permanently from public review certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) and 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept permanently confidential: Schematics Detail Block Diagram Operational Description In addition we also request the following sections of the application are to be kept short term confidential for a period of 180 days from the date of Authorization: User manual Test setup photos External photos Internal photos Rationale for request for confidentiality: Belkin International, Inc has invested considerable time and materials in research and development to produce the referenced product. Disclosure of the permanently confidential portions of this application to competitors would give them significant competitive advantages in developing similar products. Disclosure of the short-term confidential portions of this application during the period of importation and/or distribution would reveal key aspects of proprietary technology to competitors and diminish the value of our investment in research and development. If you have questions or need further information, please contact the undersigned. Sincerely, ------------------------------------------------------ Rajesh Karki / Manager Regulatory Compliance Belkin International, Inc. Tel: 310-751-2817 E-mail: [email protected]

Test report No. : 4789310744-EP Page : 1 of 17 Issued date : Jan. 15, 2020 Underwriters Laboratories Taiwan Co., Ltd. Building B and Building E, No. 372-7, Sec. 4, Zhongxing Rd., Zhudong Township, Hsinchu County, Taiwan Telephone :+886-2-7737-3000 Facsimile (FAX ) :+886-3-583-7948 Product Photos External Photos Test report No. : 4789310744-EP Page : 2 of 17 Issued date : Jan. 15, 2020 Underwriters Laboratories Taiwan Co., Ltd. Building B and Building E, No. 372-7, Sec. 4, Zhongxing Rd., Zhudong Township, Hsinchu County, Taiwan Telephone :+886-2-7737-3000 Facsimile (FAX ) :+886-3-583-7948 Test report No. : 4789310744-EP Page : 3 of 17 Issued date : Jan. 15, 2020 Underwriters Laboratories Taiwan Co., Ltd. Building B and Building E, No. 372-7, Sec. 4, Zhongxing Rd., Zhudong Township, Hsinchu County, Taiwan Telephone :+886-2-7737-3000 Facsimile (FAX ) :+886-3-583-7948 Test report No. : 4789310744-EP Page : 4 of 17 Issued date : Jan. 15, 2020 Underwriters Laboratories Taiwan Co., Ltd. Building B and Building E, No. 372-7, Sec. 4, Zhongxing Rd., Zhudong Township, Hsinchu County, Taiwan Telephone :+886-2-7737-3000 Facsimile (FAX ) :+886-3-583-7948 Test report No. : 4789310744-EP Page : 5 of 17 Issued date : Jan. 15, 2020 Underwriters Laboratories Taiwan Co., Ltd. Building B and Building E, No. 372-7, Sec. 4, Zhongxing Rd., Zhudong Township, Hsinchu County, Taiwan Telephone :+886-2-7737-3000 Facsimile (FAX ) :+886-3-583-7948 Model: DSA-18QFB FUS A (Black) Test report No. : 4789310744-EP Page : 6 of 17 Issued date : Jan. 15, 2020 Underwriters Laboratories Taiwan Co., Ltd. Building B and Building E, No. 372-7, Sec. 4, Zhongxing Rd., Zhudong Township, Hsinchu County, Taiwan Telephone :+886-2-7737-3000 Facsimile (FAX ) :+886-3-583-7948 Test report No. : 4789310744-EP Page : 7 of 17 Issued date : Jan. 15, 2020 Underwriters Laboratories Taiwan Co., Ltd. Building B and Building E, No. 372-7, Sec. 4, Zhongxing Rd., Zhudong Township, Hsinchu County, Taiwan Telephone :+886-2-7737-3000 Facsimile (FAX ) :+886-3-583-7948 Model: DSA-18QFB FUS A (White) Test report No. : 4789310744-EP Page : 8 of 17 Issued date : Jan. 15, 2020 Underwriters Laboratories Taiwan Co., Ltd. Building B and Building E, No. 372-7, Sec. 4, Zhongxing Rd., Zhudong Township, Hsinchu County, Taiwan Telephone :+886-2-7737-3000 Facsimile (FAX ) :+886-3-583-7948 Test report No. : 4789310744-EP Page : 9 of 17 Issued date : Jan. 15, 2020 Underwriters Laboratories Taiwan Co., Ltd. Building B and Building E, No. 372-7, Sec. 4, Zhongxing Rd., Zhudong Township, Hsinchu County, Taiwan Telephone :+886-2-7737-3000 Facsimile (FAX ) :+886-3-583-7948 Model: A138A-120150U-US5 (Black) Test report No. : 4789310744-EP Page : 10 of 17 Issued date : Jan. 15, 2020 Underwriters Laboratories Taiwan Co., Ltd. Building B and Building E, No. 372-7, Sec. 4, Zhongxing Rd., Zhudong Township, Hsinchu County, Taiwan Telephone :+886-2-7737-3000 Facsimile (FAX ) :+886-3-583-7948 Test report No. : 4789310744-EP Page : 11 of 17 Issued date : Jan. 15, 2020 Underwriters Laboratories Taiwan Co., Ltd. Building B and Building E, No. 372-7, Sec. 4, Zhongxing Rd., Zhudong Township, Hsinchu County, Taiwan Telephone :+886-2-7737-3000 Facsimile (FAX ) :+886-3-583-7948 Model: A138A-120150U-US5 (White) Test report No. : 4789310744-EP Page : 12 of 17 Issued date : Jan. 15, 2020 Underwriters Laboratories Taiwan Co., Ltd. Building B and Building E, No. 372-7, Sec. 4, Zhongxing Rd., Zhudong Township, Hsinchu County, Taiwan Telephone :+886-2-7737-3000 Facsimile (FAX ) :+886-3-583-7948 Test report No. : 4789310744-EP Page : 13 of 17 Issued date : Jan. 15, 2020 Underwriters Laboratories Taiwan Co., Ltd. Building B and Building E, No. 372-7, Sec. 4, Zhongxing Rd., Zhudong Township, Hsinchu County, Taiwan Telephone :+886-2-7737-3000 Facsimile (FAX ) :+886-3-583-7948 Test report No. : 4789310744-EP Page : 14 of 17 Issued date : Jan. 15, 2020 Underwriters Laboratories Taiwan Co., Ltd. Building B and Building E, No. 372-7, Sec. 4, Zhongxing Rd., Zhudong Township, Hsinchu County, Taiwan Telephone :+886-2-7737-3000 Facsimile (FAX ) :+886-3-583-7948

Test report No. : 4789310744-EP Page : 15 of 17 Issued date : Jan. 15, 2020 Underwriters Laboratories Taiwan Co., Ltd. Building B and Building E, No. 372-7, Sec. 4, Zhongxing Rd., Zhudong Township, Hsinchu County, Taiwan Telephone :+886-2-7737-3000 Facsimile (FAX ) :+886-3-583-7948 Internal Photos Test report No. : 4789310744-EP Page : 16 of 17 Issued date : Jan. 15, 2020 Underwriters Laboratories Taiwan Co., Ltd. Building B and Building E, No. 372-7, Sec. 4, Zhongxing Rd., Zhudong Township, Hsinchu County, Taiwan Telephone :+886-2-7737-3000 Facsimile (FAX ) :+886-3-583-7948 Test report No. : 4789310744-EP Page : 17 of 17 Issued date : Jan. 15, 2020 Underwriters Laboratories Taiwan Co., Ltd. Building B and Building E, No. 372-7, Sec. 4, Zhongxing Rd., Zhudong Township, Hsinchu County, Taiwan Telephone :+886-2-7737-3000 Facsimile (FAX ) :+886-3-583-7948

The results reported herein have been performed in accordance with the laboratory’s terms of accreditation. This report shall not be reproduced except in full without the written approval of the Laboratory. The results in this report apply to the test sample(s) mentioned above at the time of the testing period only and are not to be used to indicate applicability to other similar products. This report does not imply that the product(s) has met the criteria for certification. FCC RF EXPOSURE TEST REPORT For BOOST↑CHARGE Wireless Charging Stand 10W MODEL NUMBER: WIB001 FCC ID: K7SWIB001 REPORT NUMBER: 4789310744-3 ISSUE DATE: January 3, 2020 Prepared for Belkin International, Inc. 12045 East Waterfront Drive, Playa Vista, CA 90094 USA Prepared by UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch Building 10, Innovation Technology Park, No. 1, Li Bin Road, Song Shan Lake Hi- Tech Development Zone Dongguan, 523808, People’s Republic of China Tel: +86 769 22038881 Fax: +86 769 33244054 Website: www.ul.com REPORT NO.: 4789310744-3 Page 2 of 26 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM NO.: 10-SL-F0019 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Revision History Rev. Issue Date Revisions Revised By V0 1/3/2020 Initial Issue REPORT NO.: 4789310744-3 Page 3 of 26 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM NO.: 10-SL-F0019 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. TABLE OF CONTENTS 1. ATTESTATION OF TEST RESULTS ................................................................................. 4 2. TEST METHODOLOGY ..................................................................................................... 5 3. FACILITIES AND ACCREDITATION ................................................................................. 5 4. DESCRIPTION OF EUT ..................................................................................................... 6 5. REQUIREMENT ................................................................................................................. 7 REPORT NO.: 4789310744-3 Page 4 of 26 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM NO.: 10-SL-F0019 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. 1. ATTESTATION OF TEST RESULTS Applicant Information Company Name: Belkin International, Inc. Address: 12045 East Waterfront Drive, Playa Vista, CA 90094 USA Manufacturer Information Company Name: Belkin International, Inc. Address: 12045 East Waterfront Drive, Playa Vista, CA 90094 USA EUT Information EUT Name: BOOST↑CHARGE Wireless Charging Stand 10W Model: WIB001 Serial Model: / Brand: Belkin Sample Received Date: December 19, 2019 Sample Status: Normal Sample ID: 2742458 Date of Tested: December 19, 2019 ~ December 26, 2019 APPLICABLE STANDARDS STANDARD TEST RESULTS FCC 47CFR§1.1307 PASS FCC 47CFR§1.1310 PASS FCC 47CFR§2.1093 PASS FCC 47CFR§2.1091 PASS Prepared By: Checked By: Denny Huang Shawn Wen Project Engineer Laboratory Leader Approved By: Stephen Guo Laboratory Manager REPORT NO.: 4789310744-3 Page 5 of 26 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM NO.: 10-SL-F0019 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. 2. TEST METHODOLOGY The tests documented in this report were performed in accordance with FCC 47CFR§1.1307(b)(1), FCC 47CFR§1.1310, FCC 47CFR§2.1093, 680106 D01 RF Exposure wireless charging apps v03. 3. FACILITIES AND ACCREDITATION Accreditation Certificate A2LA (Certificate No.: 4102.01) UL Verification Services (Guangzhou) Co., Ltd. Song Shan Lake Branch. has been assessed and proved to be in compliance with A2LA. FCC (FCC Designation No.: CN1187) UL Verification Services (Guangzhou) Co., Ltd. Song Shan Lake Branch. Has been recognized to perform compliance testing on equipment subject to the Commission's Declaration of Conformity (DoC) and Certification rules IC (Company No.: 21320) UL Verification Services (Guangzhou) Co., Ltd. Song Shan Lake Branch. has been registered and fully described in a report filed with Industry Canada. The Company Number is 21320. VCCI (Registration No.: G-20019, R-20004, C-20012 and T-20011) UL Verification Services (Guangzhou) Co., Ltd. Song Shan Lake Branch. has been assessed and proved to be in compliance with VCCI, the Membership No. is 3793. Facility Name: Chamber D, the VCCI registration No. is G-20019 and R-20004 Shielding Room B , the VCCI registration No. is C-20012 and T-20011 Note: All tests measurement facilities use to collect the measurement data are located at Building 10, Innovation Technology Park, Song Shan Lake Hi tech Development Zone, Dongguan, 523808, China REPORT NO.: 4789310744-3 Page 6 of 26 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM NO.: 10-SL-F0019 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. 4. DESCRIPTION OF EUT EUT Name BOOST↑CHARGE Wireless Charging Stand 10W EUT Description The EUT is a wireless charger. Model WIB001 Product Description Operation Frequency 111 ~ 130kHz Rated Output Power Maximum 10W Antenna Type Coil Antenna Number 1 Ratings Input: DC 5V 2A Output:5W Input: DC 9V 2A / DC 12V 1.5A Output: 10W Note: 1. The EUT contains following accessory devices Product Brand Model Description Remark Adapter 1 belkin A138A-120150U-US5 AC Input: 100-240Vac~50/60Hz, 0.5A DC Output: 5V/2A, 9V/2A,12V/1.5A Black and White (Optional) Adapter 2 belkin DSA-18QFB FUS A AC Input: 100-240Vac~50/60Hz, 0…

Text truncated - open the document above for the full version.

Test report No. : 4789310744-US-R0-V0 Page : 1 of 120 Issued date : Jan. 16, 2020 FCC ID : K7SWIB001 Underwriters Laboratories Taiwan Co., Ltd. Building B and Building E, No. 372-7, Sec. 4, Zhongxing Rd., Zhudong Township, Hsinchu County, Taiwan Telephone :+886-2-7737-3000 Facsimile (FAX ) :+886-3-583-7948 Doc No: 17-EM-F0972 / 1.0 RADIO TEST REPORT Product : BOOST↑CHARGE Wireless Charging Stand 10W Model Name : WIB001 FCC ID : K7SWIB001 Test Regulation : FCC 47 CFR Part 15 Subpart C (Section 15.209) Received Date : Dec. 6, 2019 Test Date : Dec. 6, 2019 ~ Dec 16, 2019 Issued Date : Jan. 16, 2020 Applicant : Belkin International, Inc. 12045 East Waterfront Drive, Playa Vista, CA 90094 USA Issued By : Underwriters Laboratories Taiwan Co., Ltd. Building B and Building E, No. 372-7, Sec. 4, Zhongxing Rd., Zhudong Township, Hsinchu County, Taiwan The results reported herein have been performed in accordance with the laboratory’s terms of accreditation. This report shall not be reproduced except in full without the written approval of the Laboratory. The results in this report are responsible of the test sample(s) provided by the client only and are not to be used to indicate applicability to other similar products. Test report No. : 4789310744-US-R0-V0 Page : 2 of 120 Issued date : Jan. 16, 2020 FCC ID : K7SWIB001 Underwriters Laboratories Taiwan Co., Ltd. Building B and Building E, No. 372-7, Sec. 4, Zhongxing Rd., Zhudong Township, Hsinchu County, Taiwan Telephone :+886-2-7737-3000 Facsimile (FAX ) :+886-3-583-7948 Doc No: 17-EM-F0972 / 1.0 REVISION HISTORY Original Test Report No.: 4789310744-US-R0-V0 Rev. Test report No. Date Page revised Contents Original 4789310744-US-R0-V0 Jan. 16, 2020 - Initial issue Test report No. : 4789310744-US-R0-V0 Page : 3 of 120 Issued date : Jan. 16, 2020 FCC ID : K7SWIB001 Underwriters Laboratories Taiwan Co., Ltd. Building B and Building E, No. 372-7, Sec. 4, Zhongxing Rd., Zhudong Township, Hsinchu County, Taiwan Telephone :+886-2-7737-3000 Facsimile (FAX ) :+886-3-583-7948 Doc No: 17-EM-F0972 / 1.0 Table Of Contents 1. Attestation of Test Results .............................................................................................4 2. Summary of Test Results ...............................................................................................5 3. Test Methodology and Reference Procedures.............................................................6 4. Facilities and Accreditation ...........................................................................................6 5. Measurement Uncertainty .............................................................................................7 6. Equipment under Test ...................................................................................................8 6.1. Description of EUT .............................................................................................. 8 6.2. Test Condition ...................................................................................................... 9 6.3. Test Mode Applicability and Tested Channel Detail ......................................... 10 7. Test Equipment ............................................................................................................ 11 8. Description of Test Setup ............................................................................................ 12 9. Test Results ................................................................................................................... 14 9.1. Radiated Spurious Emission .............................................................................. 14 9.2. AC Power Line Conducted Emission ................................................................ 77 9.3. 20dB Bandwidth .............................................................................................. 119 Test report No. : 4789310744-US-R0-V0 Page : 4 of 120 Issued date : Jan. 16, 2020 FCC ID : K7SWIB001 Underwriters Laboratories Taiwan Co., Ltd. Building B and Building E, No. 372-7, Sec. 4, Zhongxing Rd., Zhudong Township, Hsinchu County, Taiwan Telephone :+886-2-7737-3000 Facsimile (FAX ) :+886-3-583-7948 Doc No: 17-EM-F0972 / 1.0 1. Attestation of Test Results APPLICANT: Belkin International, Inc. 12045 East Waterfront Drive, Playa Vista, CA 90094 USA MANUFACTURER Belkin International, Inc. 12045 East Waterfront Drive, Playa Vista, CA 90094 USA EUT DESCRIPTION: BOOST↑CHARGE Wireless Charging Stand 10W BRAND: Belkin MODEL: WIB001 SAMPLE STAGE: Production Unit DATE of TESTED: Dec. 6, 2019 ~ Dec 16, 2019 APPLICABLE STANDARDS STANDARD Test Results FCC 47 CFR PART 15 Subpart C (Section 15.209) PASS Underwriters Laboratories Taiwan Co., Ltd. tested the above equipment in accordance with the requirements set forth in the above standards. All indications of Pass/Fail in this report are opinions expressed by Underwriters Laboratories Taiwan Co., Ltd. based on interpretations and/or observations of test results. Measurement Uncertainties were not taken into account and are published for informational purposes only. The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. Note: The results documented in this report apply on…

Text truncated - open the document above for the full version.