K7SWIB007BoostCharge Magnetic Wireless Charging Stand With Qi2

U.S. Agent for Service of Process Attestation T o the attention of Federal Communications Commission Authorization and Evaluation Division A pplicant / Designated U.S Agent Company Name: Belkin International, Inc. FRN: 0008128605 Grantee code: K7S Contact Name: Jay Tu Address: 555 S Aviation Blvd. Suite 180 El Segundo, CA 90245 USA Telephone No: +1 310 633 9309 # 9142 Email: [email protected] T his letter is to confirm that the Applicant has designated itself as the U.S Agent for service of process as required by §2.911(d)(7). The Applicant further acknowledges acceptance to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Applicant / U.S. Agent Signature: Date: 2024/05/24 Signed by (printed name): Zack Vogel

June 3, 2024 FCC ID: K7SWIB007 To the attention of Federal Communications Commission Authorization and Evaluation Division Attestation Statements Attestation Statements Part 2.911(d)(5)(i) Filing Belkin International, Inc. certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receivingan equipment authorization pursuant to section 2.903 of the FCC rules. Attestation Statements Part 2.911(d)(5)(ii) Filing Belkin International, Inc. certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely yours, ------------------------------------------------------ Zack Vogel Sr. Regulatory Compliance Engineer TEL: +1 310 751 2800 Email: [email protected]

June 3, 2024 FCC ID: K7SWIB007 To the attention of Federal Communications Commission Authorization and Evaluation Division Permanent Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: Schematics Block Diagram Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely yours, ------------------------------------------------------ Zack Vogel Sr. Regulatory Compliance Engineer TEL: +1 310 751 2800 Email: [email protected]

June 3, 2024 FCC ID: K7SWIB007 To the attention of Federal Communications Commission Authorization and Evaluation Division Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the commission’s rules, we request short-term confidential treatment for the following information until 180 days after the Grant Date of Equipment Authorization in order to ensure sensitive business information remains confidential until the actual marketing of the device: User manual Test setup photos External photos Internal photos Sincerely yours, ------------------------------------------------------ Zack Vogel Sr. Regulatory Compliance Engineer TEL: +1 310 751 2800 Email: [email protected]

June 3, 2024 FCC ID: K7SWIB007 AUTHORIZATION LETTER To Whom It May Concern: We, the undersigned, hereby authorize Andrea Hsia/ Assistant Manager of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan) of Taiwan to act on our behalf in all manners relating to FCC application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Andrea Hsia/ Assistant Manager of BV CPS Taoyuan on our behalf shall have the same effect as acts of our own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Sincerely yours, ------------------------------------------------------ Zack Vogel Sr. Regulatory Compliance Engineer TEL: +1 310 751 2800 Email: [email protected]

Power of Attorney Date: January 6, 2022 To whom it may concern: I, the undersigned, Jay Tu, hereby authoriz e the person(s) listed below to act on behalf of me to sign all related documents for Belkin International, Inc.’s FCC/IC application. Name: Zack Vogel / Sr. Regulatory Compliance Engineer, Regulatory Compliance Tel: +1 800-223-5546 E-ma il: [email protected] Name: Rossi Wu / Senior Regulatory Compliance Engineer, Regulatory Compliance Tel: +1 310 633 9309 # 2960 E- mail: [email protected] Name: Daisy Dai / Regulatory Compliance Engineer, Regulatory Compliance Tel: O +86 755 2387 1039 E- mail: [email protected] Respectfully, Applicant’s company name: Belkin International, Inc. Applicant’s company address: 555 S. Aviation Blvd., Suite 180, El Segundo, CA 90245, USA Sign ature Name and Job Title: Jay Tu / Manager, Regulatory Compliance E- mail: Jay [email protected] Tel: +1 310 633 9309 # 9142

Product Label and Location FCC & IC ID permanently affixed by lase etching. (Size: 1.1mm height) Bottom of the EUT Model: WIB007 FCC ID: K7SWIB007 IC: 3623A-WIB007

Report No.: MFBGMK-WTW-P24040513 Page No. 1 / 11 Report Format Version: 6.1.1 Reference No.: BGMK-WTW-P24040513 RF Exposure Test Report Report No.: MFBGMK-WTW-P24040513 FCC ID: K7SWIB007 Test Model: WIB007 Received Date: 2024/5/7 Test Date: 2024/6/6 Issued Date: 2024/6/6 Applicant: Belkin International, Inc. Address: 555 S. Aviation Blvd., Suite 180, El Segundo, CA 90245, USA Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan FCC Registration / Designation Number: 198487 / TW2021 This report is governed by, and incorporates by reference, the Conditions of Testing as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our-business/cps/about-us/terms-conditions/ and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. Statements of conformity are based on simple acceptance criteria without taking measurement uncertainty into account, unless otherwise requested in writing. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Report No.: MFBGMK-WTW-P24040513 Page No. 2 / 11 Report Format Version: 6.1.1 Reference No.: BGMK-WTW-P24040513 Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 General Information .............................................................................................................................. 5 2.1 General Description of EUT ................................................................................................................ 5 2.2 Measurement Uncertainty ................................................................................................................... 5 3 RF Exposure .......................................................................................................................................... 6 3.1 Description of Support Units ............................................................................................................... 6 3.1.1 Configuration of System Under Test .................................................................................................... 6 3.2 Test Setup ........................................................................................................................................... 7 3.3 Test Instruments .................................................................................................................................. 7 3.4 Limits for Maximum Permissible Exposure (MPE) .............................................................................. 8 3.5 Test Point Description ......................................................................................................................... 9 4 Measurement Result ........................................................................................................................... 10 5 Photographs of the Test Configuration ............................................................................................. 11 Report No.: MFBGMK-WTW-P24040513 Page No. 3 / 11 Report Format Version: 6.1.1 Reference No.: BGMK-WTW-P24040513 Release Control Record Issue No. Description Date Issued MFBGMK-WTW-P24040513 Original release 2024/6/6 Report No.: MFBGMK-WTW-P24040513 Page No. 4 / 11 Report Format Version: 6.1.1 Reference No.: BGMK-WTW-P24040513 1 Certificate of Conformity Product: BoostCharge Magnetic Wireless Charging Stand With Qi2 Brand: belkin Test Model: WIB007 Sample Status: PVT Sample Applicant: Belkin International, Inc. Test Date: 2024/6/6 Standards: FCC Part 2 (Section 2.1091) References Test Guidance: KDB 680106 D01 Wireless Power Transfer v04 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s RF characteristics under the conditions specified in this report. Prepared by : , Date: 2024/6/6 Annie Chang / Senior Specialist Approved by : , Date: 2024/6/6 Jeremy Lin / Project Engineer Report No.: MFBGMK-WTW-P24040513 Page No. 5 / 11 Report Format Version: 6.1.1 Reference No.: BGMK-WTW-P24040513 2 General Information 2.1 General Description of EUT Product BoostCharge Magnetic Wireless Charging Stand With Qi2 Brand belkin Test Model WIB007 Sample Status Engineering sample Power Supply Rating 120Vac Modulation Type FSK Operating Frequency 127.7kHz & 360kHz Antenna Type Coil a…

Text truncated - open the document above for the full version.

Report No.: RFBGMK-WTW-P24040513 Page No. 1 / 44 Report Format Version: 6.1.1 Reference No.: BGMK-WTW-P24040513 FCC Test Report Report No.: RFBGMK-WTW-P24040513 FCC ID: K7SWIB007 Test Model: WIB007 Received Date: 2024/5/7 Test Date: 2024/5/16 ~ 2024/5/21 Issued Date: 2024/6/5 Applicant: Belkin International, Inc. Address: 555 S. Aviation Blvd., Suite 180, El Segundo, CA 90245, USA Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan FCC Registration / Designation Number: 198487 / TW2021 This report is governed by, and incorporates by reference, the Conditions of Testing as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our-business/cps/about-us/terms-conditions/ and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. Statements of conformity are based on simple acceptance criteria without taking measurement uncertainty into account, unless otherwise requested in writing. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Report No.: RFBGMK-WTW-P24040513 Page No. 2 / 44 Report Format Version: 6.1.1 Reference No.: BGMK-WTW-P24040513 Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 Summary of Test Results ..................................................................................................................... 5 2.1 Measurement Uncertainty ................................................................................................................... 5 2.2 Modification Record ............................................................................................................................ 5 3 General Information .............................................................................................................................. 6 3.1 General Description of EUT ................................................................................................................ 6 3.2 Channel List ........................................................................................................................................ 6 3.3 Test Mode Applicability and Tested Channel Detail ............................................................................ 7 3.4 Description of Support Units ............................................................................................................... 8 3.4.1 Configuration of System under Test .................................................................................................... 8 3.5 General Description of Applied Standards .......................................................................................... 9 4 Test Types and Results ...................................................................................................................... 10 4.1 Radiated Emission and Bandedge Measurement ............................................................................. 10 4.1.1 Limits of Radiated Emission and Bandedge Measurement .............................................................. 10 4.1.2 Test Instruments ................................................................................................................................. 11 4.1.3 Test Procedures ................................................................................................................................. 12 4.1.4 Deviation from Test Standard ............................................................................................................ 12 4.1.5 Test Set Up ........................................................................................................................................ 13 4.1.6 EUT Operating Conditions ................................................................................................................. 13 4.1.7 Test Results ....................................................................................................................................... 14 4.2 Conducted Emission Measurement .................................................................................................. 30 4.2.1 Limits of Conducted Emission Measurement .................................................................................... 30 4.2.2 Test Instruments ................................................................................................................................ 30 4.2.3 Test Procedures .....................................................................................................…

Text truncated - open the document above for the full version.