K7SWIZ006BOOST CHARGE True Freedom Pro Wireless Charger

Applicant: Belkin International, Inc. FCC ID: K7SWIZ006 RF Exposure Requirements ( FCC KDB 680106 D01 V03) Requirements Statements (a) Power transfer frequency is less that 1 MHz The resonator system shall operate at 127.7KHz (b) Output power from each primary coil is less than 15 watts Dimension for iPhone charging coil: single clio inner diameter 10mm, outer diameter 39mm (Coil module diameter: Length = 174mm, width = 88.4mm) Max power of 10W per coil or 20W total when using two coils. (c) The transfer system includes only single primary and secondary coils. This includes charging systems that may have multiple primary coils and clients that are able to detect and allow coupling only between individual pairs of coils All these 16 coils is 127.7KHz. (d) Client device is inserted in or placed directly in contact with the transmitter Client device is placed directly in contact with the transmitter (e) Mobile exposure conditions only (portable exposure conditions are not covered by this exclusion). It’s mobile device, and provided RF exposure report to evaluate (f) The aggregate H-field strengths at 15 cm surrounding the device and 20 cm above the top surface from all simultaneous transmitting coils are demonstrated to be less than 50% of the MPE limit. Please refer to RF Exposure Report. Jay Tu / Manager, Regulatory Compliance Belkin International, Inc. Tel: +1 310 633 9309*9142 E-mail: [email protected]

Date: 2020-08-17 FCC ID: K7SWIZ006 To the attention of Federal Communications Commission Authorization and Evaluation Division Permanent Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: Schematics Block Diagram Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely yours, Jay Tu / Manager, Regulatory Compliance Belkin International, Inc. Tel: +1 310 633 9309*9142 E-mail: [email protected]

Date: 2020-08-17 FCC ID: K7SWIZ006 To the attention of Federal Communications Commission Authorization and Evaluation Division Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the commission’s rules, we request short-term confidential treatment for the following information until 180 days after the Grant Date of Equipment Authorization in order to ensure sensitive business information remains confidential until the actual marketing of the device: External photos Test Setup photos User’s manual Internal Photos Sincerely yours, Jay Tu / Manager, Regulatory Compliance Belkin International, Inc. Tel: +1 310 633 9309*9142 E-mail: [email protected]

Date: 2020-08-17 FCC ID: K7SWIZ006 A U T H O R I Z A T I O N L E T T E R To Whom It May Concern: Belkin International, Inc. hereby authorizes Andrea Hsia / Supervisor of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (“BV CPS Taoyuan”), to act on its behalf in all matters relating to the Federal Communication Commission (“FCC”) application for equipment authorization in connection with the FCC ID listed above, including signing of all documents relating to these matters. Any and all acts carried out by Andrea Hsia / Supervisor of BV CPS Taoyuan on Belkin International, Inc.’s behalf, within the scope of the powers granted herein, shall have the same effect as acts of its own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Sincerely yours, Jay Tu / Manager, Regulatory Compliance Belkin International, Inc. Tel: +1 310 633 9309*9142 E-mail: [email protected]

Reference No.: 200617C01-1 Page No. 1 / 6 CONSTRUCTION PHOTOS OF EUT Reference No.: 200617C01-1 Page No. 2 / 6 Reference No.: 200617C01-1 Page No. 3 / 6 Reference No.: 200617C01-1 Page No. 4 / 6 Reference No.: 200617C01-1 Page No. 5 / 6 Reference No.: 200617C01-1 Page No. 6 / 6

Reference No.: 200617C01-2 Page No. 1 / 3 CONSTRUCTION PHOTOS OF EUT Reference No.: 200617C01-2 Page No. 2 / 3 Reference No.: 200617C01-2 Page No. 3 / 3