K7SWIZ010BOOST CHARGE PRO 2-in-1 Wireless Charger Stand with MagSafe

Business Unit: Program Manager: Packaging Engineer: Material: Blank Size (in): Side Shown: L x W x D (mm): DIE LAYOUT A Unit: Flute/Grain: REV Intermediate PRINT SIDE L x W x D (in): 70 gsm wood free paper FCC statement au, ja, zb 70 gsm wood free paper FCC statement 70 gsm wood free paper FCC statement my,tt vf 70 gsm wood free paper Back Front 70 gsm wood free paper FCC statement my, kr yz, dq IN/MM Drawing Scale 1:1 Retail Outside Dimension (Including Hang Tab) DO NOT PRINT DIE LINES, PRINTERS NOTES PRINT SPECS: DIE/MATERIAL SPECS: Die Line File: Matthew Duffy Please refer to drawing DL_WIZ010_EL SEGUNDO_MASS RC STATEMENT Color Plates: Notes: Artwork File: horizontal 00 RELEASE DATE: 11/04/2020 Tolerance:+/- 1/32" - 0.8mm Blank Size (mm): Finish: DIELINE: THIS DOCUMENT & THE INFORMATION IN IT ARE THE CONFIDENTIAL PROPERTY OF BELKIN INTERNATIONAL AND MUST NOT BE COPIED, REPRODUCED OR USED IN ANY MANNER WITHOUT THE WRITTEN CONSENT OF BELKIN CORPORATION. IT MUST BE RETURNED UPON REQUEST This dieline works for following skus (if any): All Regions [127] Back Front [54] [127] Back Front [54] [127] [54] [127] Back Front [54] [127] [54] [127] Back Front [54] [127] [127] Back Front [54] [127] [54] 70 gsm wood free paper FCC statement pb [127] BackFront [54] GLOBAL PACKAGE OPERATIONS XXXXX FILE NAME INS_WIZ010ttXXX_8850tt01365_Rev_A01_BOOSTCHARGE_Wireless_Charging SKU# WIZ010ttXXX P# 8850tt01365 REV A00 DESIGNER Anny DAT E 12/28/20 3:07 PM VERSION 02 Safety Instructions: 1. Please read these instructions before using the device to ensure safe and proper use. 2. Connect the wall adapter of the wireless charging stand into a socket outlet that is close by and is easy to disconnect from the source. 3. Use indoors and in a dry location only; keep away from wet or damp locations. 4. Keep wireless charging stand and wall adapter away from any liquids or moisture. 5. Unplug the wireless charging stand when unused for long periods of time. 6. Do not store your device in very hot or very cold areas. It is recommended to use your device at room temperatures. 7. Caution: If you experience problems with the wireless charging pad, please discontinue use, unplug the wall adapter of the wireless charging stand from the AC socket, and contact Belkin for assistance. 8. Do not use if visible defects are observed on the wireless charging stand or wall adapter. Do not attempt to service or disassemble. The marking information is located at the bottom of apparatus. WARRANTY AND SUPPORT INFORMATION IMPORTANT! PLEASE RETAIN PROOF OF PURCHASE AND PRODUCT WARRANTY INFORMATION BELKIN PRODUCT AND CONNECTED EQUIPMENT LIMITED WARRANTY (CONNECTED EQUIPMENT WARRANTY NOT AVAILABLE IN LATIN AMERICA) This warranty is provided to you by Belkin International, Inc, or one of its subsidiaries or affiliates (“Belkin”) IMPORTANT NOTICE REGARDING YOUR CONSUMER RIGHTS The benefits we give in this manufacturer’s warranty are additional to any rights and remedies that you may have under local consumer protection laws. Nothing in this warranty limits or affects your legal rights. This manufacturer’s warranty is governed by the laws of the country in which you purchased your Belkin product. In many countries, consumers have rights under local consumer laws. Those consumer rights may differ between countries, states and provinces, and often cannot be excluded. Your local consumer rights organization can advise you on your legal rights. This manufacturer’s warranty is not intended to: • change or exclude any rights under consumer law that cannot be lawfully changed or excluded; or • limit or exclude any right you have against the person who sold the Belkin product to you if that person has breached their sales contract with you. WHAT DOES THIS WARRANTY COVER? Product Warranty: Belkin warrants that the product hardware and any software media (i.e., media on which the product software is provided) will be free from defects in materials and workmanship under normal use during the Warranty Period described below. This means that the product won’t be defective, and that it will look and work as advertised during the relevant period. Connected Equipment Warranty: Belkin also covers damage to any equipment which is connected through the Belkin product to a properly wired AC power line with protective ground (Connected Equipment) caused by failure of the Belkin product to operate as described in the product documentation and arising as a result of impulses from lightning, or other power transients, or by momentary (less than 1ms) voltage surges or spikes (an Occurrence) during the Warranty Period (Connected Equipment Warranty). The Connected Equipment Warranty will not apply if damage to the Connected Equipment resulted from: • telephone-line transients if the Connected Equipment was not properly connected to or was not directly connected to a Belkin product that offers telephone-line transient protection; • coaxial-line transients if the Connected Equipment was not properly connected to or was not directly connected to a Belkin product that offers coaxial-line transient protection; or • network-line transients if the Connected Equipment was not properly connected to or was not directly connected to a Belkin product that offers network-line transient protection. The Connected Equipment Warranty will remain effective for the Warranty Period set out below. The Connected Equipment Warranty automatically ends when the Product Warranty ends. This warranty does not apply to products purchased from a source other than Belkin or a Belkin Authorized Reseller. How long is the product warranted and what is the maximum value of the Connected Equipment Warranty? Belkin warrants that the hardware in this Belkin product, and any associated software media, will be free from defects in materials and workmanship under normal use during the Warranty Period. The Warranty Period begins on the date the product was purchased by the original end-user purchaser and lasts fo…

Text truncated - open the document above for the full version.

8820-03130 Rev. A00 Business Unit: Program Manager: Packaging Engineer: Material: Blank Size (in): Side Shown: L x W x D (mm): DIE LAYOUT B Unit: Flute/Grain: REV Intermediate PRINT SIDE L x W x D (in): EVA 30 mm white color 2Pcs Product Bumpers 3 1 / 2 [88.900] 1 1 / 2 [38.100] Inner SBS Tray 400gsm C1S 3 3 / 8 [85.720] 8 5 / 8 [219.085] 12 1 / 16 [306.091] 300 gsm C1S no printing or coating 250 GSM C2S Front Back 4 15 / 16 [125.412] 5 19 / 32 [142.081] NITTO TAPE SCREEN GLUE Inside View Outside View Outside Printed View 400gsm C2S Outside Printed View Corr Direction 29 ECT E flute Matt PP coating 80 gsm wood free paper 5 [127.000] 12 3 / 4 [323.850] 2 1 / 8 [53.975] Glue here 2 1 / 16 [52.392] 4 27 / 32 [123.205] 8 3 / 32 [205.577] 13 25 / 32 [349.695] Paper insert Refer artwork sku WIZ010 Outer Box Refer artwork FCC Refer artwork Paper insert Refer artwork QIG Refer artwork Refer artwork EVA Foam PET Tray 7100-01511 13 3 / 32 [332.408] 5 11 / 16 [144.462] 15 7 / 8 [403.423] 5 1 / 16 [128.587] 2 11 / 16 [68.483] 5 3 / 4 [146.050] 17 11 / 16 [449.172] 9 1 / 4 [234.960] 5 3 / 16 [131.461] 29 7 / 16 [748.002] IN/MM Drawing Scale 1:1 Retail Outside Dimension (Including Hang Tab) DO NOT PRINT DIE LINES, PRINTERS NOTES PRINT SPECS: DIE/MATERIAL SPECS: 1589.305 x 1681.857 62.571 x 66.215 Die Line File: Core Pushpak Jain Please refer to drawing IDL_EL SEGUNDO APL Color Plates: Notes: Artwork File: horizontal 00 RELEASE DATE: 10/26/2020 Tolerance:+/- 1/32" - 0.8mm Blank Size (mm): Finish: DIELINE: THIS DOCUMENT & THE INFORMATION IN IT ARE THE CONFIDENTIAL PROPERTY OF BELKIN INTERNATIONAL AND MUST NOT BE COPIED, REPRODUCED OR USED IN ANY MANNER WITHOUT THE WRITTEN CONSENT OF BELKIN CORPORATION. IT MUST BE RETURNED UPON REQUEST This dieline works for following skus (if any): Business Unit: Program Manager: Packaging Engineer: Material: Blank Size (in): Side Shown: L x W x D (mm): DIE LAYOUT B Unit: Flute/Grain: REV Intermediate PRINT SIDE L x W x D (in): EVA 30 mm white color 2Pcs Product Bumpers 3 1 / 2 [88.900] 1 1 / 2 [38.100] Inner SBS Tray 400gsm C1S 3 3 / 8 [85.720] 8 5 / 8 [219.085] 12 1 / 16 [306.091] 300 gsm C1S no printing or coating 250 GSM C2S Front Back 4 15 / 16 [125.412] 5 19 / 32 [142.081] NITTO TAPE SCREEN GLUE Inside View Outside View Outside Printed View 400gsm C2S Outside Printed View Corr Direction 29 ECT E flute Matt PP coating 80 gsm wood free paper 5 [127.000] 12 3 / 4 [323.850] 2 1 / 8 [53.975] Glue here 2 1 / 16 [52.392] 4 27 / 32 [123.205] 8 3 / 32 [205.577] 13 25 / 32 [349.695] Paper insert Refer artwork sku WIZ010 Outer Box Refer artwork FCC Refer artwork Paper insert Refer artwork QIG Refer artwork Refer artwork EVA Foam PET Tray 7100-01511 13 3 / 32 [332.408] 5 11 / 16 [144.462] 15 7 / 8 [403.423] 5 1 / 16 [128.587] 2 11 / 16 [68.483] 5 3 / 4 [146.050] 17 11 / 16 [449.172] 9 1 / 4 [234.960] 5 3 / 16 [131.461] 29 7 / 16 [748.002] IN/MM Drawing Scale 1:1 Retail Outside Dimension (Including Hang Tab) DO NOT PRINT DIE LINES, PRINTERS NOTES PRINT SPECS: DIE/MATERIAL SPECS: 1589.305 x 1681.857 62.571 x 66.215 Die Line File: Core Pushpak Jain Please refer to drawing IDL_EL SEGUNDO APL Color Plates: Notes: Artwork File: horizontal 00 RELEASE DATE: 10/26/2020 Tolerance:+/- 1/32" - 0.8mm Blank Size (mm): Finish: DIELINE: THIS DOCUMENT & THE INFORMATION IN IT ARE THE CONFIDENTIAL PROPERTY OF BELKIN INTERNATIONAL AND MUST NOT BE COPIED, REPRODUCED OR USED IN ANY MANNER WITHOUT THE WRITTEN CONSENT OF BELKIN CORPORATION. IT MUST BE RETURNED UPON REQUEST This dieline works for following skus (if any): QSG_WIZ010xxXX-APL_8820-03130_RevA00_BOOSTCHARGE_PRO_2_in_1_Wireless_Charger_Stand_with_MagSafe PMS 130C PMS 7488C BLACK ALL TEXT AND GRAPHIC ELEMENTS COLOR: BLACK, PMS 7488C, PMS 185C, PMS 130C OVERALL PP COAT PMS 185C .2".2".2" .2" .2" INNOVATION CREATIVE GROUP 261686 FILE NAME QSG_WIZ010xxXX-APL_8820-03130_RevA00_BOOSTCHARGE_PRO_2_in_1_Wireless_Charger_Stand_with_MagSafe SKU# WIZ010xxXX-APL P# 8820-03130 REV A00 DESIGNER edgard DAT E 12/2/20 5:32 PM VERSION 02

---------------------- Name: Jay Tu Title: Manager, Regulatory Compliance Applicant: Belkin International, Inc. FCC ID: K7SWIZ010 RF Exposure Requirements ( FCC KDB 680106 D01 V03) Requirements Statements (a) Power transfer frequency is less that 1 MHz The resonator system shall operate at 111-148kHz & 360.0kHz (b) Output power from each primary coil is less than 15 watts Dimension for iPhone charging coil: 12.12cm 2 (Diameter=39.3mm) Max output Power for Phone charging coil: 15W Dimension for AirPods charging coil: 15.20cm 2 (diameter = 44mm) Max output Power for Apple charging coil: 5W (c) The transfer system includes only single primary and secondary coils. This includes charging systems that may have multiple primary coils and clients that are able to detect and allow coupling only between individual pairs of coils Device has two coils, one for 111-148kHz (Airpods) and one for 360.0kHz (iPhone). Coupling is only between individual pairs of coils. (d) Client device is inserted in or placed directly in contact with the transmitter Client device is placed directly in contact with the transmitter (e) Mobile exposure conditions only (portable exposure conditions are not covered by this exclusion). It’s mobile device, and provided RF exposure report to evaluate (f) The aggregate H-field strengths at 15 cm surrounding the device and 20 cm above the top surface from all simultaneous transmitting coils are demonstrated to be less than 50% of the MPE limit. Please refer to RF Exposure Report. Phone: +1 310 633 9309*9142 E-mail: [email protected]

Date: 2021-01-11 FCC ID: K7SWIZ010 To the attention of Federal Communications Commission Authorization and Evaluation Division Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the commission’s rules, we request short-term confidential treatment for the following information until 180days after the Grant Date of Equipment Authorization in order to ensure sensitive business information remains confidential until the actual marketing of the device: External photos Test Setup photos User’s manual Internal Photos Sincerely yours, ---------------- Name: Jay Tu Title: Manager, Regulatory Compliance Phone: +1 310 633 9309*9142 E-mail: [email protected]

Date: 2021-01-11 FCC ID: K7SWIZ010 A U T H O R I Z A T I O N L E T T E R To Whom It May Concern: Belkin International, Inc. hereby authorizes Andrea Hsia / Supervisor of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (“BV CPS Taoyuan”), to act on its behalf in all matters relating to the Federal Communication Commission (“FCC”) application for equipment authorization in connection with the FCC ID listed above, including signing of all documents relating to these matters. Any and all acts carried out by Andrea Hsia / Supervisor of BV CPS Taoyuan on Belkin International, Inc.’s behalf, within the scope of the powers granted herein, shall have the same effect as acts of its own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Sincerely yours, ---------------------- Name: Jay Tu Title: Manager, Regulatory Compliance Phone: +1 310 633 9309*9142 E-mail: [email protected]

Reference No.: BCBS-WTW-P20120492_EXT Page No. 1 / 6 CONSTRUCTION PHOTOS OF EUT Reference No.: BCBS-WTW-P20120492_EXT Page No. 2 / 6 Reference No.: BCBS-WTW-P20120492_EXT Page No. 3 / 6 Reference No.: BCBS-WTW-P20120492_EXT Page No. 4 / 6 Reference No.: BCBS-WTW-P20120492_EXT Page No. 5 / 6 Reference No.: BCBS-WTW-P20120492_EXT Page No. 6 / 6

Reference No.: BCBS-WTW-P20120492_INT Page No. 1 / 5 CONSTRUCTION PHOTOS OF EUT Reference No.: BCBS-WTW-P20120492_INT Page No. 2 / 5 Reference No.: BCBS-WTW-P20120492_INT Page No. 3 / 5 Reference No.: BCBS-WTW-P20120492_INT Page No. 4 / 5 Reference No.: BCBS-WTW-P20120492_INT Page No. 5 / 5

Report No.: SABCBS-WTW-P20120492 Page No. 1 / 26 Report Format Version: 6.1.1 RF Exposure Test Report Report No.: SABCBS-WTW-P20120492 FCC ID: K7SWIZ010 Test Model: WIZ010 Received Date: Dec. 15, 2020 Test Date: Dec. 16 ~ Dec. 17, 2020 Issued Date: Dec. 30, 2020 Applicant: Belkin International, Inc. Address: 12045 East Waterfront Drive, Playa Vista, CA 90094 Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location: No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, TAIWAN FCC Registration / Designation Number: 788550 / TW0003 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. Report No.: SABCBS-WTW-P20120492 Page No. 2 / 26 Report Format Version: 6.1.1 Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 General Information .............................................................................................................................. 5 2.1 General Description of EUT ................................................................................................................ 5 3 RF Exposure .......................................................................................................................................... 6 3.1 Description of Support Units ............................................................................................................... 6 1.1.1 Configuration of System under Test .................................................................................................... 6 1.2 Test Setup ........................................................................................................................................... 7 1.3 Test Instruments .................................................................................................................................. 7 1.4 Limits for Maximum Permissible Exposure (MPE) .............................................................................. 8 1.5 Test Point Description ......................................................................................................................... 8 2. Calculation Result of Maximum Conducted Power ........................................................................... 9 3. Photographs of the Test Configuration ............................................................................................ 26 Report No.: SABCBS-WTW-P20120492 Page No. 3 / 26 Report Format Version: 6.1.1 Release Control Record Issue No. Description Date Issued SABCBS-WTW-P20120492 Original release Dec. 30, 2020 Report No.: SABCBS-WTW-P20120492 Page No. 4 / 26 Report Format Version: 6.1.1 1 Certificate of Conformity Product: BOOST↑CHARGE™ PRO 2-in-1 Wireless Charger Stand with MagSafe Brand: belkin Test Model: WIZ010 Sample Status: Engineering sample Applicant: Belkin International, Inc. Test Date: Dec. 16 ~ Dec. 17, 2020 Standards: FCC Part 1 (Section 1.1307(b), Section 1.1310) FCC Part 2 (Section 2.1091) References Test Guidance: IEEE C95.3 -2002 KDB 680106 D01 RF Exposure Wireless Charging Apps v03 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s RF characteristics under the conditions specified in this report. Prepared by : , Date:Dec. 30, 2020 Polly Chien / Specialist Approved by : , Date:Dec. 30, 2020 Bruce Chen / Senior Project Engineer Report No.: SABCBS-WTW-P20120492 Page No. 5 / 26 Report Format Version: 6.1.1 2 General Information 2.1 General Description of EUT Product BOOST↑CHARGE™ PRO 2-in-1 Wireless Charger Stand with MagSafe Brand belkin Test Model WIZ010 Sample Status Engineering sample Power Supply Rating 15Vdc (adapter) Modulation Type FSK Operating Frequency 360.0kHz 111-148kHz Antenna Type Coil antenna (The Antenna information is declared by manufacturer and for more detailed features description, please refer to the manufacturer's specifications, the laboratory shall not be held responsible) Field Strength 360.0kHz: -28.3dBuV/m 147.9kHz: -7.3dBuV/m Dimension for iPhone charging coil 12.12cm 2 (Diameter = 39.3mm) Dimension for AirPods charging coil 15.20cm 2 (Diameter = 44mm) Accessory Device Refer to Note as below…

Text truncated - open the document above for the full version.

Report No.: RFBCBS-WTW-P20120492 Page No. 1 / 46 Report Format Version: 6.1.1 FCC Test Report Report No.: RFBCBS-WTW-P20120492 FCC ID: K7SWIZ010 Test Model: WIZ010 Received Date: Dec. 15, 2020 Test Date: Dec. 16 ~ Dec. 17, 2020 Issued Date: Dec. 30, 2020 Applicant: Belkin International, Inc. Address: 12045 East Waterfront Drive, Playa Vista, CA 90094 Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location: No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, TAIWAN FCC Registration / Designation Number: 788550 / TW0003 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. Report No.: RFBCBS-WTW-P20120492 Page No. 2 / 46 Report Format Version: 6.1.1 Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 Summary of Test Results ..................................................................................................................... 5 2.1 Measurement Uncertainty ................................................................................................................... 5 2.2 Modification Record ............................................................................................................................ 5 3 General Information .............................................................................................................................. 6 3.1 General Description of EUT ................................................................................................................ 6 3.2 Description of Test Modes ................................................................................................................... 6 3.2.1 Test Mode Applicability and Tested Channel Detail ............................................................................. 7 3.3 Description of Support Units ............................................................................................................... 8 3.3.1 Configuration of System under Test .................................................................................................... 8 3.4 General Description of Applied Standards .......................................................................................... 9 4 Test Types and Results ...................................................................................................................... 10 4.1 Radiated Emission and Bandedge Measurement ............................................................................. 10 4.1.1 Limits of Radiated Emission and Bandedge Measurement .............................................................. 10 4.1.2 Test Instruments ................................................................................................................................. 11 4.1.3 Test Procedures ................................................................................................................................. 12 4.1.4 Deviation from Test Standard ............................................................................................................ 12 4.1.5 Test Set Up ........................................................................................................................................ 13 4.1.6 EUT Operating Conditions ................................................................................................................. 14 4.1.7 Test Results ....................................................................................................................................... 15 4.2 Conducted Emission Measurement .................................................................................................. 35 4.2.1 Limits of Conducted Emission Measurement .................................................................................... 35 4.2.2 Test Instruments ................................................................................................................................ 35 4.2.3 Test Procedures ................................................................................................................................. 36 4.2.4 Deviation from Test Standard ............................................................................................................ 36 4.2.5 Test Setup ...........................................................................................................................…

Text truncated - open the document above for the full version.

Reference No..: BCBS-WTW-P20120492-1 Page No. 1 / 12 PHOTOGRAPHS OF THE TEST CONFIGURATION For 360.0kHz E-Field and H-Field (Left) (Charging Mode) E-Field and H-Field (Right) (Charging Mode) Reference No..: BCBS-WTW-P20120492-1 Page No. 2 / 12 E-Field and H-Field (Top) (Charging Mode) E-Field and H-Field (Bottom) (Charging Mode) Reference No..: BCBS-WTW-P20120492-1 Page No. 3 / 12 E-Field and H-Field (Z-axis_Above: 15cm) (Charging Mode) E-Field and H-Field (Z-axis_Above: 20cm) (Charging Mode) Reference No..: BCBS-WTW-P20120492-1 Page No. 4 / 12 For 147.9kHz E-Field and H-Field (Left) (Charging Mode) E-Field and H-Field (Right) (Charging Mode) Reference No..: BCBS-WTW-P20120492-1 Page No. 5 / 12 E-Field and H-Field (Top) (Charging Mode) E-Field and H-Field (Bottom) (Charging Mode) Reference No..: BCBS-WTW-P20120492-1 Page No. 6 / 12 E-Field and H-Field (Z-axis_Above: 15cm) (Charging Mode) E-Field and H-Field (Z-axis_Above: 20cm) (Charging Mode) Reference No..: BCBS-WTW-P20120492-1 Page No. 7 / 12 For 360.0kHz + 147.9kHz E-Field and H-Field (Left) (Charging Mode) E-Field and H-Field (Right) (Charging Mode) Reference No..: BCBS-WTW-P20120492-1 Page No. 8 / 12 E-Field and H-Field (Top) (Charging Mode) E-Field and H-Field (Bottom) (Charging Mode) Reference No..: BCBS-WTW-P20120492-1 Page No. 9 / 12 E-Field and H-Field (Z-axis_Above: 15cm) (Charging Mode) E-Field and H-Field (Z-axis_Above: 20cm) (Charging Mode) Reference No..: BCBS-WTW-P20120492-1 Page No. 10 / 12 E-Field and H-Field (Left) (Standby Mode) E-Field and H-Field (Right) (Standby Mode) Reference No..: BCBS-WTW-P20120492-1 Page No. 11 / 12 E-Field and H-Field (Top) (Standby Mode) E-Field and H-Field (Bottom) (Standby Mode) Reference No..: BCBS-WTW-P20120492-1 Page No. 12 / 12 E-Field and H-Field (Z-axis_Above: 15cm) (Standby Mode) E-Field and H-Field (Z-axis_Above: 20cm) (Standby Mode)

Reference No.: BCBS-WTW-P20120492_TSup Page No. 1 / 12 PHOTOGRAPHS OF THE TEST CONFIGURATION Conducted Emission Test Test Mode A Reference No.: BCBS-WTW-P20120492_TSup Page No. 2 / 12 Conducted Emission Test Test Mode B Reference No.: BCBS-WTW-P20120492_TSup Page No. 3 / 12 Conducted Emission Test Test Mode C Reference No.: BCBS-WTW-P20120492_TSup Page No. 4 / 12 Conducted Emission Test Test Mode D Reference No.: BCBS-WTW-P20120492_TSup Page No. 5 / 12 Radiated Emission Test (9kHz ~ 30MHz) Test Mode A Reference No.: BCBS-WTW-P20120492_TSup Page No. 6 / 12 Radiated Emission Test (9kHz ~ 30MHz) Test Mode B Reference No.: BCBS-WTW-P20120492_TSup Page No. 7 / 12 Radiated Emission Test (9kHz ~ 30MHz) Test Mode C Reference No.: BCBS-WTW-P20120492_TSup Page No. 8 / 12 Radiated Emission Test (9kHz ~ 30MHz) Test Mode D Reference No.: BCBS-WTW-P20120492_TSup Page No. 9 / 12 Radiated Emission Test (30MHz ~ 1GHz) Test Mode A Reference No.: BCBS-WTW-P20120492_TSup Page No. 10 / 12 Radiated Emission Test (30MHz ~ 1GHz) Test Mode B Reference No.: BCBS-WTW-P20120492_TSup Page No. 11 / 12 Radiated Emission Test (30MHz ~ 1GHz) Test Mode C Reference No.: BCBS-WTW-P20120492_TSup Page No. 12 / 12 Radiated Emission Test (30MHz ~ 1GHz) Test Mode D