K7SWIZ024BoostCharge Pro 3-in-1 Magnetic Charging Travel Pad

CFR 47 §2.911 (d)(5) Attestation Date: 8/19/2024 FCC ID: K7SWIZ024 To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA 1.Belkin International, Inc. (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. 2.Belkin International, Inc. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment and is not an affiliate or subsidiary of an entity identified on the Covered List. Sincerely yours, Name: Zack Vogel Job Title: Sr. Regulatory Compliance Engineer Company Name: Belkin International, Inc.

CFR 47 §2.911 (d)(7) Agent Designation Attestation Date: 8/19/2024 FCC ID: K7SWIZ024 To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Belkin International, Inc. (“the applicant”) as required by section 2.911(d)(7), will also serve as the agent for service of process for the above referenced FCC ID. The applicant acknowledges that they will maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the agent information changes. Jay Tu Belkin International, Inc. 555 S. Aviation Blvd., Suite 180, El Segundo, CA 90245, USA [email protected] FRN: 0008128605 Sincerely yours, Zack Vogel Belkin International, Inc. 555 S. Aviation Blvd., Suite 180, El Segundo, CA 90245, USA [email protected]

Date: 7/8/2024 UL Verification Services Inc. 47173 Benicia Street Fremont, CA 94538, USA To whom it may concern: I, t he undersigned, hereby authorize UL Verification Services Inc. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by UL Verification Services Inc. on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing UL Verification Services Inc. as our representative, we still recognize that we are responsible to: a)fulfill the requirements for the scope of certification requested, including implementing any appropriate changes requested by UL Verification Services Telecommunications Certification Body (TCB) and / or the FCC; b)supply any and all information needed for the evaluation of the products for which certification is sought; c)make claims regarding certification only in respect of the scope for which certification has been granted; d)not use our product certification in such a manner as to bring the TCB or FCC into disrepute and to not make any statement regarding product certification which the TCB or FCC may consider misleading or unauthorized; e)discontinue use of all advertising matter that contains any reference thereto and complies with any and all actions required by the FCC upon suspension or cancellation of certification; f)use certification only to indicate that products are certified in conformity with specified standards; g)endeavor to ensure that no certificate or report or any part thereof is used in a misleading manner, and any copies of the grants/certificates shall be reproduced in their entirety; h)comply with the requirements of the TCB and FCC, including the use of marks and label information prescribed for the scope of certification, when making reference to product certification in communication media such as documents, brochure or advertisements; i)comply with the requirements for certification, supply any information needed for evaluation of products to be certified and, where applicable, make provision for the participation of observers; j)ensure that products marketed under the scope of the requested certification continue to comply with the certification requirements; k)provide a sample of a production unit for testing within 30 days of the request should this product be selected as part of either the TCB’s or the FCC’s market surveillance requirements; l)keep a record of all complaints relating to product’s compliance with requirements of relevant standard; make records available to UL or FCC when requested; take appropriate action with respect to such complaints and any deficiencies found in the product that affect compliance with requirements for certification; document the actions taken with respect to complaints and/or deficiencies; m)inform the TCB immediately of any changes that may affect its ability to comply with the certification requirements. This authorization is valid until further written notice from the applicant. Sincerely Yours, Zack Vogel Sr. Regulatory Compliance Engineer Belkin International, Inc.

Date: 7/8/2024 Attn: FCC Office of Engineering and Technology / UL Verification Services TCB Subject: R equest for Confidentiality FCC ID: K7SWIZ024 To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we a re requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Operational Description Above mentioned documents contain detailed system and equipment descriptions and are considered proprietary information. The public disclosure of above documents might be harmful to our company and would give a competitor an unfair advantage in the market. In addition to above mentioned documents, pursuant to Public Notice DA 04‐1705 of the Commission’s policy, to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we are requesting the commission to grant short‐ term confidentiality on the following attachments until 180 days have passed after the grant has been published and released. External Photos Internal Photos Test Setup Photos User Manual We understand that all test reports, test setup photos, RF Exposure Info, ID Label and location, and external photos which have been made available during the certification review process cannot be granted as confidential documents. We understand that these documents will be available for public review once the grant of equipment authorization is issued. Best Regards, Zack Vogel Sr. Regulatory Compliance Engineer Belkin International, Inc.

Power of Attorney Date: October 6, 2022 To whom it may concern: I, the undersigned, Jay Tu, hereby authorize the person(s) listed below to act on behalf of me to sign all related documents for Belkin International, Inc.’s FCC/IC application. Name: Zack Vogel / Regulatory Compliance Engineer, Regulatory Compliance Tel: +1 800-223-5546 E-mail: [email protected] Name: Rossi Wu / Senior Regulatory Compliance Engineer, Regulatory Compliance Tel: +1 310 633 9309 # 2960 E-mail: [email protected] Name: Daisy Dai / Regulatory Compliance Engineer, Regulatory Compliance Tel: O +86 755 2387 1039 E-mail: [email protected] Respectfully, Applicant’s company name: Belkin International, Inc. Applicant’s company address: 12045 East Waterfront Dr., Playa Vista, CA 90094, United Sates Signature Name and Job Title: Jay Tu / Manager, Regulatory Compliance E-mail: [email protected] Tel: +1 310 633 9309 # 9142

FCC_IC Product Label and Location FCC & IC ID permanently affixed by laser etching ( size 1.3mm height) Model: WIZ024 FCC ID: K7SWIZ024 IC: 3623A-WIZ024 Bottom of the EUT

TEST REPORT Report Number. : 15259435-E2V1 Applicant : BELKIN INTERNATIONAL, INC. 555 S. AVIATION BLVD., SUITE 180 EL SEGUNDO, CA 90245, USA Model : WIZ024 FCC ID : K7SWIZ024 EUT Description : BoostCharge Pro 3-in-1 Magnetic Charging Travel Pad Test Standard(s) : FCC 47 CFR PART 1 SUBPART I FCC 47 CFR PART 2 SUBPART J Date Of Issue: 2024-08-21 Prepared by: UL Verification Services Inc. 47173 Benicia Street Fremont, CA 94538 U.S.A. TEL: (510) 319-4000 FAX: (510) 661-0888 REPORT NO: 15259435-E2V1 DATE: 2024-08-21 FCC ID: K7SWIZ024 MODEL NUMBER: WIZ024 Page 2 of 21 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 319-4000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc. Revision History Rev. Issue Date Revisions Revised By V1 2024-08-21 Initial Issue --- REPORT NO: 15259435-E2V1 DATE: 2024-08-21 FCC ID: K7SWIZ024 MODEL NUMBER: WIZ024 Page 3 of 21 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 319-4000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc. TABLE OF CONTENTS 1. ATTESTATION OF TEST RESULTS ..................................................................................4 2. TEST METHODOLOGY ......................................................................................................5 3. FACILITIES AND ACCREDITATION ..................................................................................5 4. DECISION RULES AND MEASUREMENT UNCERTAINTY (RF EXPOSURE) ..................6 4.1. METROLOGICAL TRACEABILITY ..............................................................................6 4.2. DECISION RULES ......................................................................................................6 4.3. MEASUREMENT UNCERTAINTY ...............................................................................6 5. KDB 680106 D01 SECTION 5b EQUIPMENT APPROVAL CONSIDERATIONS ...............7 6. EQUIPMENT UNDER TEST ................................................................................................8 6.1. DESCRIPTION OF EUT ..............................................................................................8 6.2. SOFTWARE AND FIRMWARE....................................................................................8 6.3. WORST-CASE CONFIGURATION AND MODE ..........................................................9 7. TEST AND MEASUREMENT EQUIPMENT ......................................................................10 8. DUTY CYCLE ....................................................................................................................11 9. MAXIMUM PERMISSIBLE RF EXPOSURE ......................................................................14 9.1. FCC LIMITS AND SUMMARY ...................................................................................14 9.1.1. MAXIMUM RESULT SUMMARY .......................................................................15 9.1.2. E- FIELD AND H- FIELD MEASUREMENTS .....................................................18 10. RF EXPOSURE TEST SETUP AND SETUP PHOTO........................................................21 REPORT NO: 15259435-E2V1 DATE: 2024-08-21 FCC ID: K7SWIZ024 MODEL NUMBER: WIZ024 Page 4 of 21 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 319-4000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc. 1. ATTESTATION OF TEST RESULTS COMPANY NAME: BELKIN INTERNATIONAL, INC. 555 S. AVIATION BLVD., SUITE 180 EL SEGUNDO, CA 90245, USA EUT DESCRIPTION: BoostCharge Pro 3-in-1 Magnetic Charging Travel Pad MODEL NUMBER: WIZ024 BRAND: belkin SERIAL NUMBER: Proto 1 SAMPLE RECEIPT DATE: 2024-07-09 DATE TESTED: 2024-07-16 TO 2024-07-18 APPLICABLE STANDARDS STANDARD TEST RESULTS FCC PART 1 SUBPART I & PART 2 SUBPART J Complies UL Verification Services Inc. tested the above equipment in accordance with the requirements set forth in the above standards. The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. The results documented in this report apply only to the tested sample, under the conditions and modes of operation as described herein. It is the manufacturer's responsibility to assure that additional production units of this model are manufactured with identical electrical and mechanical components. All samples tested were in good operating condition throughout the entire test program. Measurement Uncertainties are published for informational purposes only and were not taken into account unless noted otherwise. This document may not be altered or revised in any way unless done so by UL Verification Services Inc. and all revisions are duly noted in the revisions section. Any alteration of this document not carried out by UL Verification Services Inc. will constitute fraud and shall nullify the document. Approved & Released For UL Verification Services Inc. By: Reviewed By: Francisco de Anda Tina Chu Staff Engineer Senior Project Engineer Consumer Technology Division Consumer Technology Division UL Verification Services Inc. UL Verification Services Inc. REPORT NO: 15259435-E2V1 DATE: 2024-08-21 FCC ID: K7SWIZ024 MODEL NUMBER: WIZ024 Page 5 of 21 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 319-4000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc. 2. TEST METHODOLOGY This report contains data provided by the customer which can impact the validity of results. UL Verification Services Inc. is only responsible for correctly integrating customer-provided…

Text truncated - open the document above for the full version.

TEST REPORT Report Number. : 15259435-E1V1 Applicant : BELKIN INTERNATIONAL, INC. 555 S. AVIATION BLVD., SUITE 180 EL SEGUNDO, CA 90245, USA Model : WIZ024 FCC ID : K7SWIZ024 EUT Description : BoostCharge Pro 3-in-1 Magnetic Charging Travel Pad Test Standard(s) : FCC 47 CFR PART 15 SUBPART C Date Of Issue: 2024-08-21 Prepared by: UL Verification Services Inc. 47173 Benicia Street Fremont, CA 94538 U.S.A. TEL: (510) 319-4000 FAX: (510) 661-0888 REPORT NO: 15259435-E1V1 DATE: 2024-08-21 FCC ID: K7SWIZ024 Page 2 of 34 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 Benicia Street, Fremont, CA 94538, USA TEL:(510) 319-4000 FAX:(510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. Revision History Rev. Issue Date Revisions Revised By V1 2024-08-21 Initial Issue --- REPORT NO: 15259435-E1V1 DATE: 2024-08-21 FCC ID: K7SWIZ024 Page 3 of 34 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 Benicia Street, Fremont, CA 94538, USA TEL:(510) 319-4000 FAX:(510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. TABLE OF CONTENTS 1. ATTESTATION OF TEST RESULTS .................................................................................. 5 2. TEST METHODOLOGY ...................................................................................................... 7 3. FACILITIES AND ACCREDITATION .................................................................................. 7 4. DECISION RULES AND MEASUREMENT UNCERTAINTY ............................................... 8 4.1. METROLOGICAL TRACEABILITY ...............................................................................8 4.2. DECISION RULES ........................................................................................................8 4.3. MEASUREMENT UNCERTAINTY ................................................................................8 5. EQUIPMENT UNDER TEST ................................................................................................ 9 5.1. DESCRIPTION OF EUT ...............................................................................................9 5.2. MAXIMUM E-FIELD STRENGTH .................................................................................9 5.3. SOFTWARE AND FIRMWARE .....................................................................................9 5.4. WORST-CASE CONFIGURATION .............................................................................10 6. TEST AND MEASUREMENT EQUIPMENT ...................................................................... 11 7. OCCUPIED BANDWIDTH ................................................................................................. 12 8. RADIATED EMISSION TEST RESULTS .......................................................................... 15 8.1. LIMITS AND PROCEDURE ........................................................................................15 8.2. FCC TX FUNDAMENTAL AND SPURIOUS EMISSIONS FROM 9 kHz TO 30 MHz...16 8.2.1. CONFIGURATION 1: WPT ON STANDBY ..........................................................16 8.2.2. CONFIGURATION 2: OPERATING MODE WITH iPhone (360kHz) ....................17 8.2.3. CONFIGURATION 3: OPERATING MODE WITH iPhone (127.7kHz) .................18 8.2.4. CONFIGURATION 4: OPERATING MODE WITH AirPods Pro Case (127.7kHz) 19 8.2.5. CONFIGURATION 5: OPERATING MODE WITH iPhone (111-148kHz) .............20 8.2.6. CONFIGURATION 6: OPERATING MODE WITH AirPods Pro Case (111-148kHz) 21 8.2.7. CONFIGURATION 7: OPERATING MODE WITH Watch (326.5kHz) ..................22 8.2.8. CONFIGURATION 8: OPERATING MODE WITH Watch (1.778MHz) .................23 8.2.9. CONFIGURATION 9: OPERATING MODE WITH iPhone (360kHz) + iPhone (111- 148kHz) + Watch (1.778MHz) ............................................................................................24 8.3. FCC TX SPURIOUS EMISSION 30 TO 1000 MHz .....................................................25 8.3.1. CONFIGURATION 1: WPT ON STANDBY ..........................................................25 8.3.2. CONFIGURATION 9: OPERATING MODE WITH iPhone (360kHz) + iPhone (111- 148kHz ) + Watch (1.778MHz) ...........................................................................................27 9. AC MAINS LINE CONDUCTED EMISSIONS .................................................................... 29 9.1. CONFIGURATION 1: WPT ON STANDBY .................................................................30 9.2. CONFIGURATION 9: OPERATING MODE WITH iPhone (360kHz) + iPhone (111- 148kHz ) + Watch (1.778MHz) ..............................................................................................32 REPORT NO: 15259435-E1V1 DATE: 2024-08-21 FCC ID: K7SWIZ024 Page 4 of 34 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 Benicia Street, Fremont, CA 94538, USA TEL:(510) 319-4000 FAX:(510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. 10. DESCRIPTION OF TEST SETUP AND SETUP PHOTOS ................................................ 34 REPORT NO: 15259435-E1V1 DATE: 2024-08-21 FCC ID: K7SWIZ024 Page 5 of 34 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 Benicia Street, Fremont, CA 94538, USA TEL:(510) 319-4000 FAX:(510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. 1. ATTESTATION OF TEST RESULTS COMPANY NAME: BELKIN INTERNATIONAL, INC. 555 S. AVIATION BLVD., SUITE 180 EL SEGUNDO, CA 90245, USA EUT DESCRIPTION: BoostCharge Pro 3-in-1 Magnetic Charging Travel Pad MODEL NUMBER: WIZ024 BRAND: belkin SERIAL NUMBER: Proto 1 SAMPLE RECEIPT DATE: 2024-07-09 and 2024-07-25 DATE TESTED: 2024-07-15 TO 2024-08-07 APPLICABLE STANDARDS STANDARD TEST RESULTS FCC PART 15 SUBPART C Complies UL Verification Services Inc. tested the above equipment in accordan…

Text truncated - open the document above for the full version.