K7SWIZ033BoostCharge Dual Magnetic Charging Pad

Belkin International, Inc. * the applicant must designate a contact located in the United States for purposes of acting as the applicant’s agent for service of process, regardless of whether the applicant is a domestic or foreign entity. An applicant located in the United States may designate itself as the agent for service of process. U.S. Agent Designation for Service of Process - Certification Attestation Letter November 25, 2024 Nemko North America, Inc. 303 River Road Ottawa K1V 1H2 Canada ATTN.: Reviewing Engineer FCC ID: K7SWIZ033 Per section 2.911(d)(7) of the FCC rules, Belkin International, Inc. (“the applicant”) certifies that the equipment for which authorization is sought is designated to the following U.S. Designated agent* for service of process: Company Name: Belkin International, Inc. Physical U.S. Company Address: 555 S. Aviation Blvd., Suite 180, El Segundo, CA 90245, USA Agent name: Jay Tu Agent Email Address: [email protected] FRN: 0008128605 The above contact person accepts the obligation for service of process. The applicant accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Applicant Signed: Designated Agent Signed: (Required, if different to Applicant): Signed: Signed: Printed name: Zack Vogel Printed name: Zack Vogel Title: Regulatory Compliance Engineer Title: Regulatory Compliance Engineer Company Name: Belkin International, Inc. Company Name: Belkin International, Inc. Date: November 25, 2024 Date: November 25, 2024 FRN Code: 0008128605 FRN Code: 0008128605

Belkin International, Inc. Covered Equipment Certification Attestation Letter 11/25/2024 Nemko North America, Inc. 303 River Road Ottawa K1V 1H2 Canada ATTN.: Reviewing Engineer FCC ID: K7SWIZ033 Belkin International, Inc. (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Note: If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, the applicant should include an explanation on why the equipment is not “covered” equipment. Belkin International, Inc. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Signed: Printed name: Zack Vogel Title: Regulatory Compliance Engineer Company Name: Belkin International, Inc. Date: 11/25/2024 Belkin International, Inc. (“the applicant”) certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity ioranti virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a).

Belkin International, Inc. 11/25/2024 Nemko North America, Inc. 303 River Road Ottawa, Ontario, Canada K1V 1H2 AUTHORITY TO ACT AS AGENT - FCC On our behalf, I appoint Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch and No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in FCC regulations will have affixed to it a label identical to that submitted for approval with this application. In signing this letter, Applicant certifies that neither the applicant nor any party to the application is not subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, as specified by Nemko North America Inc., still resides still resides with us. Sincerely, Printed name: Zack Vogel

Power of Attorney Date: Jan. 10, 2022 To whom it may concern: I, the undersigned, Jay Tu, hereby authorize the person listed below to act in behalf of me to sign all related documents for Belkin International, Inc.’s FCC/IC application. Name: Zack Vogel / Regulatory Compliance Engineer, Regulatory Compliance Tel: +1 800-223-5546 E-mail: [email protected] Name: Andrei Moldavanov / Regulatory Compliance Engineer, Regulatory Compliance E-mail: [email protected] Name: Rossi Wu / Senior Regulatory Compliance Engineer, Regulatory Compliance Tel: +1 310 633 9309 # 2960 E-mail: [email protected] Name: Daisy Dai / Regulatory Compliance Engineer, Regulatory Compliance Tel: O +86 755 2387 1039 E-mail: [email protected] Respectfully, Applicant’s company name: Belkin International, Inc. Applicant’s company address: 555 S. Aviation Blvd., Suite 180, El Segundo, CA 90245-4852, USA Signature Name and Job Title: Jay Tu / Manager, Regulatory Compliance

Belkin International, Inc. November 25, 2024 Nemko North America, Inc. 303 River Road Ottawa, Ontario, Canada K1V 1H2 REQUEST FOR CONFIDENTIALITY - FCC FCC ID: K7SWIZ033 Pursuant to Sections 0.457(d) and 0.459 of the Commission’s Rules and FCC Guidance document 726920, we hereby request permanent confidential treatment of exhibits identified as such in the table below and request they are permanently withheld from public review based on the documents containing trade secrets and proprietary information not customarily released to the public. The public disclosure of this information might be harmful to the applicant and provide unjustified benefits to its competitors. We also request short-term confidentiality on certain exhibits until the intended date of marketing as outlined below. We request the exhibits be withheld from public view for a period of 180 days. We attest marketing of the product will only commence after the period of short-term confidentiality expires, or if marketing is to commence before the requested number of days listed above, the grantee will inform Nemko to release the Short-Term Confidentiality information withheld on the FCC equipment authorization website. Exhibit Type of Confidentiality Requested Block Diagrams ☒ Permanent ☐ Short Term External Photos ------------------ ☒ Short Term Internal Photos ☐ Permanent* ☒ Short Term Operation Description ☒ Permanent ☐ Short Term Parts List & Placement/BOM ☐ Permanent ☐ Short Term Tune-Up Procedure ☐ Permanent ☐ Short Term Schematic Diagrams ☒ Permanent ☐ Short Term Test Setup Photos ------------------ ☒ Short Term User’s Manual ☐ Permanent* ☒ Short Term The asterisked items (*) require further information to be provided in this justification letter before permanent confidentiality will be extended to these exhibits. Please refer to FCC KDB 726920 D01 found at: https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=41731 and review section II, 3) regarding specific information that must accompany these requests. Note: any documents held under the Short-Term confidentiality will automatically become public after the requested time if an appropriate extension request has not been received. Any exhibits (i.e., schematic diagrams) that may have already been requested to have “Permanent” confidentiality as shown above need not be repeated under Short-Term confidentiality request. Sincerely, Signed: Printed name: Zack Vogel Title: Regulatory Compliance Engineer Company Name: Belkin International, Inc.

Belkin International, Inc. 555 S. Aviation Blvd., Suite 180, El Segundo, CA 90245, USA 2024/11/25 To: Federal Communicaons Commission 7435 Oakland Mills Road Columbia, MD FCC ID: K7SWIZ033 To Whom It May Concern: This le*er is to ascertain that ( Belkin International, Inc.) Product (BoostCharge 2-In-1 Magnec Wireless Charging Stand with Qi2) Wireless Charger (WIZ028), has been the units used for conducng FCC compliance tesng, and it meets KDB 680106 D01 V04 Clause 5(2) all 6 condions except criteria (4). Criteria Requirements Yes No Explanaon (1) The power transfer frequency is below 1 MHz. The power transfer frequency are 127.7kHz/360.0kHz (2) The output power from each transmi@ng element (e.g., coil) is less than or equal to 15 wa*s. The maximum output power of each coil is less than 15 wa*s. (3) A client device providing the maximum permi*ed load is placed in physical contact with the transmi*er (i.e., the surfaces of the transmi*er and client device enclosures need to be in physical contact) (4) Only § 2.1091-Mobile exposure condions apply (5) The E-field and H-field strengths, at and beyond 20 cm surrounding the device surface, are demonstrated to be less than 50% of the applicable MPE limit, per KDB 447498, Table 1. These measurements shall be taken along the principal axes of the device, with one axis oriented along the direcon of the esmated maximum field strength, and for three points per axis or unl a 1/d (inverse distance from the emi*er structure) field strength decay is observed. Symmetry consideraons may be used for test reducon purposes. The device shall be operated in documented worst-case compliance scenarios (i.e., the ones that lead to the maximum field components), and while all the radiang structures (e.g., coils or antennas) that by design can simultaneously transmit are energized at their nominal maximum power. See the test report. (6) For systems with more than one radiang structure, the condions specified in (5) must be met when the system is fully loaded (i.e., clients absorbing maximum power available), and with all the radiang structures operang at maximum power at the same me, as per design condions. If the design allows one or more radiang The DUT(Device Under Test) includes two radiang structure, and operang at maximum power Belkin International, Inc. 555 S. Aviation Blvd., Suite 180, El Segundo, CA 90245, USA structures to be powered at a higher level while other radiang structures are not powered, then those cases must be tested as well. For instance, a device may use three RF coils powered at 5 W, or one coil powered at 15 W: in this case, both scenarios shall be tested. If you have any queson or concerns, please contact us. Sincerely Yours, Name / Title: Zack Vogel/ Regulatory Compliance Engineer Company Name: Belkin International, Inc. Company Address: 555 S. Aviation Blvd., Suite 180, El Segundo, CA 90245, USA Tel: +1 310 751-2800 Fax: N/A Email: [email protected]

FCC_IC Product Label and Location FCC & IC ID permanently affixed (size 1mm height) Model: WIZ033 FCC ID: K7SWIZ033 IC: 3623A-WIZ033 Bottom of the EUT

Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel.: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 1 of 16 Report Version A Test Report No.: FM2410WDG0213 RF EXPOSURE TEST REPORT Applicant Belkin International, Inc. Address 555 S. Aviation Blvd., Suite 180, El Segundo, CA 90245, USA Manufacturer or Supplier Belkin International, Inc. Address 555 S. Aviation Blvd., Suite 180, El Segundo, CA 90245, USA Product BoostCharge Dual Magnetic Charging Pad Brand Name belkin Model WIZ033 Additional Model & Model Difference N/A Date of tests Oct. 30, 2024 ~ Nov. 22, 2024 The submitted sample of the above equipment has been tested according to the requirements of the following standard: 47 CFR PART 1, Subpart I, Section 1.1310 KDB 680106 D01 CONCLUSION: The submitted sample was found to COMPLY with the test requirement Prepared by Eric Fang Project Engineer / EMC Department Approved by Glyn He Assistant Manager/ EMC Department Date: Nov. 26, 2024 This report is governed by, and incorporates by reference, the Conditions of Testing as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our-business/cps/about-us/terms-conditions/ and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. Statements of conformity are based on simple acceptance criteria without taking measurement uncertainty into account, unless otherwise requested in writing. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel.: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 2 of 16 Report Version A Test Report No.: FM2410WDG0213 TABLE OF CONTENTS RF EXPOSURE TEST REPORT ................................................................................................................1 RELEASE CONTROL RECORD ..................................................................................................................3 1. GENERAL INFORMATION ..................................................................................................................4 1.1. GENERAL DESCRIPTION OF EUT ............................................................................................4 2. RF EXPOSURE MEASUREMENT ......................................................................................................6 2.1 LIMITS .........................................................................................................................................6 2.2 DESCRIPTION OF SUPPORT UNITS .........................................................................................6 2.3 CONFIGURATION OF SYSTEM UNDER TEST ..........................................................................7 2.4 TEST SETUP FOR WPC .............................................................................................................8 2.5 EQUIPMENTS USED DURING TEST .........................................................................................8 2.6 TEST POINT DESCRIPTION ......................................................................................................9 2.7 TEST RESULTS ........................................................................................................................ 10 3. PHOTOGRAPHS OF THE TEST CONFIGURATION....................................................................... 16 Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel.: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 3 of 16 Report Version A Test Report No.: FM2410WDG0213 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED FM2410WDG0213 Original release Nov. 26, 2024 Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel.: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 4 of 16 Report Version A Test Report No.: FM2410WDG0213 1. GENERAL INFORMATION 1.1. GENERAL DESCRIPTION OF EUT FCC ID K7SWIZ033 PRODUCT BoostCharge Dual Magnetic Charging Pad MODEL NO. WIZ033 ADDITIONAL MODEL N/A POWER SUPPLY DC 15V From Adapter MODULATION TECHNOLOGY FSK OPERATING FREQUENCY RANGE Charging Pad(1&2):115-205K & 360kHz MAXIMUM POWER OUTPUT FROM EACH CHARGING COIL (2) 15W ANTENNA TYPE Coil Antenna*2 I/O PORTS Refer to user’s manual CABLE SUPPLIED See note 4 NOTES: 1. For a more detailed features description,…

Text truncated - open the document above for the full version.

Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 1 of 68 Report Version A Test Report No.: RF2410WDG0213 TEST REPORT Applicant Belkin International, Inc. Address 555 S. Aviation Blvd., Suite 180, El Segundo, CA 90245, USA Manufacturer or Supplier Belkin International, Inc. Address 555 S. Aviation Blvd., Suite 180, El Segundo, CA 90245, USA Product BoostCharge Dual Magnetic Charging Pad Brand Name belkin Model WIZ033 Additional Model & Model Difference N/A Date of tests Oct. 30, 2024 ~ Nov. 22, 2024 The submitted sample of the above equipment has been tested for according to the requirements of the following standards: FCC Part 15, Subpart C CONCLUSION: The submitted sample was found to COMPLY with the test requirement Prepared by Eric Fang Project Engineer / EMC Department Approved by Glyn He Assistant Manager/ EMC Department Date: Nov. 26, 2024 This report is governed by, and incorporates by reference, the Conditions of Testing as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our-business/cps/about-us/terms-conditions/ and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. Statements of conformity are based on simple acceptance criteria without taking measurement uncertainty into account, unless otherwise requested in writing. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 2 of 68 Report Version A Test Report No.: RF2410WDG0213 TABLE OF CONTENTS RELEASE CONTROL RECORD ............................................................................................................ 3 1 SUMMARY OF TEST RESULTS ..................................................................................................... 4 2 MEASUREMENT UNCERTAINTY .................................................................................................. 4 3 GENERAL INFORMATION .............................................................................................................. 5 3.1 GENERAL DESCRIPTION OF EUT ......................................................................................... 5 3.2 DESCRIPTION OF TEST MODES ........................................................................................... 6 3.3 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ........................................... 6 3.4 DESCRIPTION OF SUPPORT UNITS ..................................................................................... 8 3.5 CONFIGURATION OF SYSTEM UNDER TEST ...................................................................... 9 3.6 GENERAL DESCRIPTION OF APPLIED STANDARDS ........................................................ 10 4 EMISSION TEST .............................................................................................................................11 4.1 CONDUCTED EMISSION MEASUREMENT .......................................................................... 11 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT ................................................ 11 4.1.2 TEST INSTRUMENTS ...................................................................................................... 11 4.1.3 TEST PROCEDURE ........................................................................................................ 12 4.1.4 DEVIATION FROM TEST STANDARD ........................................................................... 12 4.1.5 TEST SETUP ................................................................................................................... 13 4.1.6 EUT OPERATING CONDITIONS .................................................................................... 13 4.1.7 TEST RESULTS .............................................................................................................. 14 4.2 RADIATED EMISSION MEASUREMENT .............................................................................. 16 4.2.1 LIMITS OF RADIATED EMISSION MEASUREMENT .................................................... 16 4.2.2 TEST INSTRUMENTS ..................................................................................................... 17 4.2.3 TEST PROCEDURE ........................................................................................................ 18 4.2.4 DEVIATION FROM TEST STANDARD ........................................................................... 18 4.2.5 TEST SETUP ..........................................…

Text truncated - open the document above for the full version.