K95KNGP800CHANDHELD TRANSCEIVER

Contents Federal Communications Commission Regulations ......................... 5 Compliance with RF Exposure Standards ........................................ 5 Industry Canada Compliance ........................................................... 5 FCC Requirements ...................................................................... 6 RF Exposure Compliance and Control Guidelines ........................... 8 Radio Controls ........................................................................... 10 LCD Display ............................................................................... 11 Status Indicators ..............................................................................11 Alphanumeric Label Options............................................................11 Buttons and Labels ..........................................................................12 Battery Installation and Removal ............................................. 13 Installing the Battery ........................................................................13 Removing the Battery ......................................................................13 Battery Care and Maintenance ................................................ 14 Antenna Installation and Removal ........................................... 14 Programmable Switch and Button Functions ......................... 15 Switch Options .................................................................................15 Buttons Options ...............................................................................15 Menu Options...................................................................................15 Preset Menu Items ...........................................................................15 Keypad Menu Operation ..................................................................16 Preset Menu Items ...........................................................................16 Basic Radio Operation .............................................................. 17 Receive ............................................................................................17 Transmit ...........................................................................................17 Channel Zone Selection ............................................................ 18 Code Guard Operation .............................................................. 19 Analog Squelch Control ...................................................................19 APCO Project 25 Squelch Control ...................................................19 Code Guard Receive ...................................................................... 20 Code Guard Transmit ...................................................................... 20 Mixed Mode Operation .............................................................. 21 Mixed Mode Talkback ......................................................................21 DTMF/ANI Operation ................................................................. 22 ANI Only.......................................................................................... 22 DTMF Only ...................................................................................... 22 Both ................................................................................................. 22 Encryption Operation ............................................................... 22 Required Setup ............................................................................... 22 Operation ........................................................................................ 23 Transmit Encryption Key Selection ................................................. 23 Zeroization ...................................................................................... 24 Over-the-Air-Rekeying (OTAR) ....................................................... 25 Keyset Viewing and Selecting ......................................................... 26 Tactical OTAR Option (KZA0584) ................................................... 27 General Options......................................................................... 29 Backlight (LIGT) .............................................................................. 29 Keypad Lock ................................................................................... 29 Monitor (MON) ................................................................................ 29 Repeater Talkaround (TA) ............................................................... 30 Surveillance Mode (SURV) ..............................................................31 Squelch Adjust (SQL) ......................................................................31 Tx Digital (TXD) ............................................................................... 32 Tx Power (LPW) .............................................................................. 32 Zone Select (ZON) .......................................................................... 33 Scan Options ............................................................................. 33 Channel Scan (SCAN) .................................................................... 33 Scanning Code Guarded Channels ................................................ 34 Nuisance Channel Delete ............................................................... 34 Transmitting with Scan On ............................................................. 34 Talkback Scan ................................................................................. 35 Priority Scan (PRI) .......................................................................... 35 Scan List Add/Delete ...................................................................... 38 Zone Scan (ZSCN) ......................................................................... 38 Zone Scan List Add/Delete ......................................................…

Text truncated - open the document above for the full version.

July 28, 2011 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: K95KNGP800C Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Exhibit Description Exhibit Name + Extension Schematic - System Board K95KNGP800 System Board Schematic C.pdf Schematic - RF Board K95KNGP800 RF Board Schematic.pdf Block Diagram KNG-P800_block_diagrams.doc Circuit Description KNG-P800_Theory of Operation.doc Parts List KNG-P800_Parts_List.pdf Tune Up procedure KNG P800_Alignment.doc The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Sincerely, RELM Wireless Corp. – BK Radio 7100 Technology Dr. W. Melbourne, FL 32904

KNG-P800 Photos FCC ID K95KNGP800C External Photos Front View Back View Top View KNG-P800 Photos FCC ID K95KNGP800 Side View

KNG-P800 Photos FCC ID K95KNGP800 Internal Photos. RF board - Top side RF board - Bottom side. KNG-P800 Photos FCC ID K95KNGP800 System board - Bottom side System board - Top side

Applicant: Relm Wireless Corp. FCC ID: K95KNGP800C IC:2116A-KNGP800C DUT Type: Portable 700/800 P25 PTT Radio Transceiver Model: KNG-P800 764-805 / 806-869 MHz 2011 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the prior written permission of Celltech Labs Inc. Page 26 of 81 Date(s) of Evaluation August 04-05, 08, 2011 Test Report Serial No. 071111K95-T1109-S90P Test Report Revision No. Rev. 1.0 (Initial Release) Test Report Issue Date August 11, 2011 Description of Test(s) Specific Absorption Rate RF Exposure Category Occupational (Controlled) Test Lab Certificate No. 2470.01 APPENDIX A - SAR MEASUREMENT DATA Applicant: Relm Wireless Corp. FCC ID: K95KNGP800C IC:2116A-KNGP800C DUT Type: Portable 700/800 P25 PTT Radio Transceiver Model: KNG-P800 764-805 / 806-869 MHz 2011 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the prior written permission of Celltech Labs Inc. Page 27 of 81 Date(s) of Evaluation August 04-05, 08, 2011 Test Report Serial No. 071111K95-T1109-S90P Test Report Revision No. Rev. 1.0 (Initial Release) Test Report Issue Date August 11, 2011 Description of Test(s) Specific Absorption Rate RF Exposure Category Occupational (Controlled) Test Lab Certificate No. 2470.01 Face SAR Plot #1 (F1) Date Tested: 08/08/2011 DUT: Relm KNG-P800; Type: Portable 700/800 P25 PTT Radio Transceiver; Serial: 11130001 (Pre-production) Ambient Temp: 24°C; Fluid Temp: 24.2°C; Barometric Pressure: 101.1 kPa; Humidity: 31% Communication System: CW Frequency: 777 MHz; Duty Cycle: 1:1 Medium: HSL835 Medium parameters used (interpolated): f = 777 MHz; ı = 0.834 mho/m; İ r = 42.5; ȡ = 1000 kg/m 3 - Probe: ET3DV6 - SN1590; ConvF(6.5, 6.5, 6.5); Calibrated: 22/06/2011 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn353; Calibrated: 27/04/2010 - Phantom: Side Planar; Type: Plexiglas; Serial: 161 - Measurement SW: DASY4, V4.7 Build 44; Postprocessing SW: SEMCAD, V1.8 Build 171 Face-held SAR - 2.5 cm Spacing from Front of DUT to Planar Phantom Area Scan (6x24x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 1.10 mW/g Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 9.99 V/m; Power Drift = -1.79 dB Peak SAR (extrapolated) = 1.24 W/kg SAR(1 g) = 1.02 mW/g; SAR(10 g) = 0.778 mW/g Maximum value of SAR (measured) = 1.07 mW/g Applicant: Relm Wireless Corp. FCC ID: K95KNGP800C IC:2116A-KNGP800C DUT Type: Portable 700/800 P25 PTT Radio Transceiver Model: KNG-P800 764-805 / 806-869 MHz 2011 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the prior written permission of Celltech Labs Inc. Page 28 of 81 Date(s) of Evaluation August 04-05, 08, 2011 Test Report Serial No. 071111K95-T1109-S90P Test Report Revision No. Rev. 1.0 (Initial Release) Test Report Issue Date August 11, 2011 Description of Test(s) Specific Absorption Rate RF Exposure Category Occupational (Controlled) Test Lab Certificate No. 2470.01 Face SAR Plot #2 (F2) Date Tested: 08/08/2011 DUT: Relm KNG-P800; Type: Portable 700/800 P25 PTT Radio Transceiver; Serial: 11130001 (Pre-production) Ambient Temp: 24°C; Fluid Temp: 24.2°C; Barometric Pressure: 101.1 kPa; Humidity: 31% Communication System: CW Frequency: 777 MHz; Duty Cycle: 1:1 Medium: HSL835 Medium parameters used (interpolated): f = 777 MHz; ı = 0.834 mho/m; İ r = 42.5; ȡ = 1000 kg/m 3 - Probe: ET3DV6 - SN1590; ConvF(6.5, 6.5, 6.5); Calibrated: 22/06/2011 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn353; Calibrated: 27/04/2010 - Phantom: Side Planar; Type: Plexiglas; Serial: 161 - Measurement SW: DASY4, V4.7 Build 44; Postprocessing SW: SEMCAD, V1.8 Build 171 Face-held SAR - 2.5 cm Spacing from Front of DUT to Planar Phantom Area Scan (6x24x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.999 mW/g Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 8.58 V/m; Power Drift = 0.818 dB Peak SAR (extrapolated) = 1.15 W/kg SAR(1 g) = 0.939 mW/g; SAR(10 g) = 0.712 mW/g Maximum value of SAR (measured) = 0.985 mW/g Applicant: Relm Wireless Corp. FCC ID: K95KNGP800C IC:2116A-KNGP800C DUT Type: Portable 700/800 P25 PTT Radio Transceiver Model: KNG-P800 764-805 / 806-869 MHz 2011 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the prior written permission of Celltech Labs Inc. Page 29 of 81 Date(s) of Evaluation August 04-05, 08, 2011 Test Report Serial No. 071111K95-T1109-S90P Test Report Revision No. Rev. 1.0 (Initial Release) Test Report Issue Date August 11, 2011 Description of Test(s) Specific Absorption Rate RF Exposure Category Occupational (Controlled) Test Lab Certificate No. 2470.01 Face SAR Plot #3 (F3) Date Tested: 08/08/2011 DUT: Relm KNG-P800; Type: Portable 700/800 P25 PTT Radio Transceiver; Serial: 11130001 (Pre-production) Ambient Temp: 24°C; Fluid Temp: 24.2°C; Barometric Pressure: 101.1 kPa; Humidity: 31% Communication System: CW Frequency: 805 MHz; Duty Cycle: 1:1 Medium: HSL835 Medium parameters used: f = 805 MHz; ı = 0.87 mho/m; İ r = 42; ȡ = 1000 kg/m 3 - Probe: ET3DV6 - SN1590; ConvF(6.5, 6.5, 6.5); Calibrated: 22/06/2011 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn353; Calibrated: 27/04/2010 - Phantom: Side Planar; Type: Plexiglas; Serial: 161 - Measurement SW: DASY4, V4.7 Build 44; Postprocessing SW: SEMCAD, V1.8 Build 171 Face-held SAR - 2.5 cm Spacing from Front of DUT to Planar Phantom Area Scan (6x24x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 2.05 mW/g Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 8.88 V/m; Power Drift = 0.262 dB Peak SAR (extrapolated) = 2.33 W/kg SAR(1 g) = 1.88 mW/g; SAR(10 g) = 1.43 mW/g Maximum value of SAR (measured) = 2.03 mW/g Applicant: Relm Wireless Corp. FCC ID: K95KNGP800C IC:2116A-KNGP800C DUT Type: Portable 700/800 P25 PTT Radio…

Text truncated - open the document above for the full version.

Applicant: Relm Wireless Corp. FCC ID: K95KNGP800C IC: 2116A-KNGP800C DUT Type: Portable 700/800 P25 PTT Radio Transceiver Model: KNG-P800 764-805 / 806-869 MHz 2011 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the prior written permission of Celltech Labs Inc. Page 1 of 81 Date(s) of Evaluation August 04-05, 08, 2011 Test Report Serial No. 071111K95-T1109-S90P Test Report Revision No. Rev. 1.0 (Initial Release) Test Report Issue Date August 11, 2011 Description of Test(s) Specific Absorption Rate RF Exposure Category Occupational (Controlled) Test Lab Certificate No. 2470.01 DECLARATION OF COMPLIANCE - SAR RF EXPOSURE EVALUATION - FCC/IC Name CELLTECH LABS INC. Test Lab Information Address 21-364 Lougheed Road, Kelowna, B.C. V1X 7R8 Canada Test Lab Accreditation(s) A2LA ISO/IEC 17025:2005 (A2LA Test Lab Certificate No. 2470.01) Name RELM WIRELESS CORPORATION - BK RADIO Applicant Information Address 7100 Technology Drive, W. Melbourne, FL 32904 USA Standard(s) Applied FCC 47 CFR §2.1093 ICHealth Canada Safety Code 6 OET Bulletin 65, Supplement C (01/01) KDB 447498 D01v04 (Mobile & Portable Device - RF Exposure Procedures) FCC KDB 643646 D01v01r01 (SAR Test Reduction Considerations for Occ. PTT Radios) Procedure(s) Applied IC RSS-102 Issue 4 IEEE1528-2003 IEC62209-2:2010 FCC Licensed Non-Broadcast Transmitter Held to Face (TNF) - FCC Part 90 Device Classification(s) IC Land Mobile Radio Transmitter/Receiver (27.41-960 MHz) - RSS-119 FCC ID: K95KNGP800C Application Type FCC TCB Certification Device Identifier(s) IC 2116A-KNGP800C Application Type IC CB Certification Date of Sample Receipt July 11, 2011 Dates of EvaluationAugust 04-05, 08, 2011 Device Description Portable 700/800-Band P25 Push-To-Talk (PTT) Radio Transceiver Device Model(s) KNG-P800 Test Sample Serial No.11130001 (Pre-production) Test Sample Revision No.s Hardware RF Assembly: Ver. 8; System Logic: Ver. 6 Firmware 4.1.2 Transmit Frequency Range(s) FCC/IC 764 - 777 MHz 794 - 805 MHz 806 - 824 MHz 851 - 870 MHz 2.5 W (Conducted) - 700 Band + 0.5 W (700 Band) Manufacturer’s Rated Output Power 3.0 W (Conducted) - 800 Band Upper Tolerance Spec. + 0.5 W (800 Band) Antenna Type(s) Tested 1/2-wave Whip Detachable Length: 195 mm P/N: KAA0825 Li-ion 10.8 V 1950 mAh P/N: KAA0100 Battery Type(s) Tested Li-ion 10.8 V 3450 mAh P/N: KAA0101 Belt-Clip Contains metal components P/N: KAA0400 Body-worn Accessories Tested Carry Case Contains metal components P/N: KAA0451B Audio Accessories Tested Speaker-Microphone P/N: KAA0200 Face-held 1.28 W/kg 1g50% PTT duty cycle Occupational / Controlled Exp. Max. SAR Level(s) Evaluated Body-worn 3.21 W/kg 1g50% PTT duty cycle Occupational / Controlled Exp. FCC/IC Spatial Peak SAR Limit Head/Body 8.0 W/kg 1g50% PTT duty cycle Occupational / Controlled Exp. Celltech Labs Inc. declares under its sole responsibility that this wireless portable device has demonstrated compliance with the Specific Absorption Rate (SAR) RF exposure requirements specified in FCC 47 CFR §2.1093 and Health Canada Safety Code 6 for the Occupational / Controlled Exposure environment. The device was tested in accordance with the measurement procedures specified in FCC OET Bulletin 65, Supplement C (Edition 01-01), Industry Canada RSS-102 Issue 4, IEEE Standard 1528-2003 and IEC International Standard 62209-2:2010. All measurements were performed in accordance with the SAR system manufacturer recommendations. I attest to the accuracy of data. All measurements were performed by me or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. This test report shall not be reproduced partially, or in full, without the prior written approval of Celltech Labs Inc. The results and statements contained in this report pertain only to the device(s) evaluated. Test Report Approved BySean JohnstonLab ManagerCelltech Labs Inc. Applicant: Relm Wireless Corp. FCC ID: K95KNGP800C IC: 2116A-KNGP800C DUT Type: Portable 700/800 P25 PTT Radio Transceiver Model: KNG-P800 764-805 / 806-869 MHz 2011 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the prior written permission of Celltech Labs Inc. Page 2 of 81 Date(s) of Evaluation August 04-05, 08, 2011 Test Report Serial No. 071111K95-T1109-S90P Test Report Revision No. Rev. 1.0 (Initial Release) Test Report Issue Date August 11, 2011 Description of Test(s) Specific Absorption Rate RF Exposure Category Occupational (Controlled) Test Lab Certificate No. 2470.01 TABLE OF CONTENTS 1.0 INTRODUCTION __________________________________________________________________ 4 2.0 SAR MEASUREMENT SYSTEM ______________________________________________________ 4 3.0 RF CONDUCTED OUTPUT POWER MEASUREMENTS ___________________________________ 4 4.0 FCC POWER THRESHOLDS FOR PTT DEVICES (f< 0.5 GHz) _____________________________ 5 5.0 SAR PROBE CALIBRATION & MEASUREMENT FREQUENCIES ___________________________ 5 6.0 NO. OF TEST CHANNELS (N C )_______________________________________________________ 5 7.0 MANUFACTURER’S DISCLOSED ACCESSORY LISTING _________________________________ 6 8.0 FLUID DIELECTRIC PARAMETERS___________________________________________________ 7 9.0 TEST REDUCTION PROCEDURES APPLIED PER FCC KDB 643646 _______________________ 11 10.0 SAR MEASUREMENT SUMMARY __________________________________________________ 12 SAR MEASUREMENT SUMMARY (CONT.) _______________________________________________ 13 SAR MEASUREMENT SUMMARY (CONT.) _______________________________________________ 14 11.0 SAR SCALING (MANUFACTURER TOLERANCE)_____________________________________ 15 12.0 SAR SENSITIVITY ADJUSTMENT __________________________________________________ 16 13.0 DETAILS OF SAR EVALUATION ___________________________________________________ 17 14.0 SAR EVALUATION PROCEDURES_________________________…

Text truncated - open the document above for the full version.

FCC PART 90 AND IC RSS-119, RSS-GEN TEST REPORT APPLICANT RELM WIRELESS CORP. - BK RADIO 7100 TECHNOLOGY DRIVE WEST MELBOURNE FLORIDA 32904 USA FCC ID K95KNGP800C IC CERTIFICATION 2116A-KNGP800C MODEL NUMBER KNG-P800 PRODUCT DESCRIPTION HANDHELD TRANSCEIVER DATE SAMPLE RECEIVED 5/10/2011 DATE TESTED 6/7/2011 TESTED BY Joe Scoglio APPROVED BY Mario R. de Aranzeta TIMCO REPORT NO. 961AUT11TestReport.doc TEST RESULTS PASS FAIL THE ATTACHED REPORT SHALL NOT BE REPRODUCED EXCEPT IN FULL WITHOUT THE WRITTEN APPROVAL OF TIMCO ENGINEERING, INC. TABLE OF CONTENTS 849 NW STATE ROAD 45 NEWBERRY, FL 32669 USA PH: 888.472.2424 OR 352.472.5500 FAX: 352.472.2030 EMAIL: [email protected] HTTP: //WWW.TIMCOENGR.COM Certificate # 0955-01 Applicant: RELM WIRELESS CORP. - BK RADIO FCC ID: K95KNGP800C IC CERT #: 2116A-KNGP800C Report: R\RELM_K95\961AUT11\961AUT11TestReport.doc Page 2 of 8 TABLE OF CONTENTS GENERAL REMARKS ......................................................................................................... 3 GENERAL INFORMATION .................................................................................................. 4 TEST PROCEDURES ......................................................................................................... 5 FIELD STRENGTH OF SPURIOUS EMISSIONS ................................................................... 6 EMC EQUIPMENT LIST ..................................................................................................... 8 Applicant: RELM WIRELESS CORP. - BK RADIO FCC ID: K95KNGP800C IC CERT #: 2116A-KNGP800C Report: R\RELM_K95\961AUT11\961AUT11TestReport.doc Page 3 of 8 GENERAL REMARKS The attached report shall not be reproduced except in full without the written permission of Timco Engineering Inc. The test results relate only to the items tested. Summary The device under test does: fulfill the general approval requirements as identified in this test report not fulfill the general approval requirements as identified in this test report Attestations This equipment has been tested in accordance with the standards identified in this test report. To the best of my knowledge and belief, these tests were performed using the measurement procedures described in this report. All instrumentation and accessories used to test products for compliance to the indicated standards are calibrated regularly in accordance with ISO 17025: 2005 requirements. Testing Certificate # 0955-01 I attest that the necessary measurements were made, under my supervision, at: Timco Engineering Inc. 849 NW State Road 45 Newberry, Fl 32669 Authorized Signatory Name: Mario de Aranzeta C.E.T. Compliance Engineer/ Lab. Supervisor Date: August 18, 2011 Applicant: RELM WIRELESS CORP. - BK RADIO FCC ID: K95KNGP800C IC CERT #: 2116A-KNGP800C Report: R\RELM_K95\961AUT11\961AUT11TestReport.doc Page 4 of 8 GENERAL INFORMATION DUT Specification DUT Description HANDHELD TRANSCEIVER FCC ID K95KNGP800C IC Certification 2116A-KNGP800C Model Number KNG-P800 Serial Number N/A Operating Frequency 763-870MHz Test Frequencies 764.0, 770.0, 777.0 MHz, 851.0, 860.0, 869.0 MHz Type of Emission 16K0F3E/11K0F3E/8K10F1E/8K10F1D/8K10F1W Modulation FM DUT Power Source 110–120Vac/50– 60Hz DC Power 12V Battery Operated Exclusively Test Item Prototype Pre-Production Production Type of Equipment Fixed Mobile Portable Test Conditions The temperature was 26ºC with a relative humidity of 50%. Modification to the DUT None Test Exercise The DUT was placed in continuous transmit mode. Applicable Standards ANSI/TIA 603-C:2004, FCC CFR 47 Part 90, IC RSS- 119, RSS-GEN Test Facility Timco Engineering Inc. at 849 NW State Road 45 Newberry, FL 32669 USA. Applicant: RELM WIRELESS CORP. - BK RADIO FCC ID: K95KNGP800C IC CERT #: 2116A-KNGP800C Report: R\RELM_K95\961AUT11\961AUT11TestReport.doc Page 5 of 8 TEST PROCEDURES Radiation Interference: The test procedure used was ANSI/TIA 603-C:2004 using an Agilent spectrum receiver with pre-selector. The bandwidth (RBW) of the spectrum receiver was 100 kHz up to 1 GHz and 1 MHz above 1 GHz with an appropriate sweep speed. The VBW above 1 GHz was 3 MHz. The analyzer was calibrated in dB above a micro volt at the output of the antenna. Applicant: RELM WIRELESS CORP. - BK RADIO FCC ID: K95KNGP800C IC CERT #: 2116A-KNGP800C Report: R\RELM_K95\961AUT11\961AUT11TestReport.doc Page 6 of 8 FIELD STRENGTH OF SPURIOUS EMISSIONS Rule Parts. No.: FCC Part 2.1053, RSS-GEN 4.9 Requirements: 25 kHz Channel Spacing = 43+10log(Po) 12.5 kHz Channel Spacing = 50 +10log(Po) 6.25 kHz Channel Spacing = 55+10log(Po) FCC Limit for: 25 kHz Channel Spacing = 700 MHz Band – 47.8 dBc, 800 MHz Band – 48.4 dBc 12.5 kHz Spacing = 700 MHz Band – 54.8 dBc, 800 MHz Band – 55.4 dBc 6.25 kHz Channel Spacing = N/A METHOD OF MEASUREMENT: The tabulated data shows the results of the radiated field strength emissions test. The spectrum was scanned from 30 MHz to at least the tenth harmonic of the fundamental. This test was conducted per ANSI/TIA 603-C:2004 using the substitution method. Measurements were made at the test site of TIMCO ENGINEERING, INC. located at 849 NW State Road 45, Newberry, FL 32669. Test Setup Diagram: Applicant: RELM WIRELESS CORP. - BK RADIO FCC ID: K95KNGP800C IC CERT #: 2116A-KNGP800C Report: R\RELM_K95\961AUT11\961AUT11TestReport.doc Page 7 of 8 Test Data: LOW BAND TX Emission Frequency MHz Ant. Pol dB Below Carrier (dBc) Emission Frequency MHz Ant. Pol dB Below Carrier (dBc) Emission Frequency MHz Ant. Pol dB Below Carrier (dBc) 764.00 V 0 770.00 V 0 777.00 V 0 1528.00 V 80.5 1540.00 V 76.6 1554.00 V 76.4 2292.00 H 60.5 2310.00 H 57.7 2331.00 V 63.3 3056.00 H 71.1 3080.00 H 66.0 3108.00 H 72.8 3820.00 H 68.5 3850.00 H 70.7 3885.00 H 70.2 4584.00 H 73.2 4620.00 H 68.2 4662.00 H 69.7 5348.00 H 75.5 5390.00 H 73.9 5439.00 H 74.2 6112.00 H 70.1 6160.00 H 73.3 6216.00 H 75.4 6876.00 H 80.2 7700.00 H 77.0 7770.00 H 79.4 HIGH BAND TX Emission Frequency MHz Ant. Pol dB Below Carrier (dBc) Emi…

Text truncated - open the document above for the full version.

FCC PART 90 AND RSS-119 TEST REPORT APPLICANT RELM WIRELESS CORP. – BK RADIO 7100 TECHNOLOGY DRIVE WEST MELBOURNE FLORIDA 32094 USA FCC ID K95KNGP800C IC 2116A-KNGP800C MODEL NUMBER KNG-P800 PRODUCT DESCRIPTION PORTABLE 700-800MHz RADIO DATE TESTED 5/10/11 TESTED BY Abhinay Kuchikulla APPROVED BY Brian W. Jones, VP Engineering TIMCO REPORT NO. K95KNGP800C-Report.doc TEST RESULTS PASS FAIL Applicant: RELM WIRELESS CORP. – BK RADIO FCC ID: K95KNGP800C IC: 2116A-KNGP800C Report: Z:\R\RELM_K95\961AUT11\Extra961AUT11\K95KNGP800C-Report (3).doc Page 2 of 64 TABLE OF CONTENTS GENERAL REMARKS ................................................................................................. 3 GENERAL INFORMATION .......................................................................................... 4 EQUIPMENT LIST ...................................................................................................... 5 TEST SETUP ............................................................................................................. 6 RF POWER OUTPUT ................................................................................................ 10 MODULATION CHARACTERISTICS .......................................................................... 12 VOICE MODULATED COMMUNICATION EQUIPMENT ............................................. 20 OTHER MODULATION CHARACTERISTICS ............................................................. 25 OCCUPIED BANDWIDTH ......................................................................................... 26 OCCUPIED BANDWIDTH PLOTS .............................................................................. 27 SPURIOUS EMISSIONS AT ANTENNA TERMINALS (CONDUCTED) ........................... 37 FREQUENCY STABILITY .......................................................................................... 43 TRANSIENT FREQUENCY BEHAVIOR ...................................................................... 48 ADJACENT CHANNEL POWER ................................................................................ 61 Applicant: RELM WIRELESS CORP. – BK RADIO FCC ID: K95KNGP800C IC: 2116A-KNGP800C Report: Z:\R\RELM_K95\961AUT11\Extra961AUT11\K95KNGP800C-Report (3).doc Page 3 of 64 GENERAL REMARKS The attached report shall not be reproduced except in full without the written permission of Relm Wireless Corp. – BK Radio. Summary The device under test does: fulfill the general approval requirements as identified in this test report not fulfill the general approval requirements as identified in this test report Attestations This equipment has been tested in accordance with the standards identified in this test report. To the best of my knowledge and belief, these tests were performed using the measurement procedures described in this report. All instrumentation and accessories used to test products for compliance to the indicated standards are calibrated regularly. I attest that the necessary measurements were made, under my supervision, at: Relm Wireless Corp. – BK Radio 7100 Technology Drive West Melbourne, FL 32904 Authorized Signatory Name: Brian W. Jones VP Engineering Date: June 30, 2011 Applicant: RELM WIRELESS CORP. – BK RADIO FCC ID: K95KNGP800C IC: 2116A-KNGP800C Report: Z:\R\RELM_K95\961AUT11\Extra961AUT11\K95KNGP800C-Report (3).doc Page 4 of 64 GENERAL INFORMATION DUT Specification DUT Description PORTABLE 700-800MHz RADIO FCC ID K95KNGP800C IC 2116A-KNGP800C Model Number KNG-P800 Operating Frequency 763-870MHz Type of Emission 16K0F3E/11K0F3E/8K10F1E/8K10F1D/8K10F1W Modulation FM DUT Power Source 110–120Vac/50– 60Hz DC Power 12V Battery Operated Exclusively Test Item Prototype Pre-Production Production Type of Equipment Fixed Mobile Portable Test Conditions Temperature: 26ºC Relative humidity: 50%. Modification to the DUT None Test Exercise The DUT was placed in continuous transmit mode. Applicable Standards ANSI/TIA 603-C:2004, FCC CFR 47 Part 90 Test Facility Relm Wireless Corp. – BK Radio Applicant: RELM WIRELESS CORP. – BK RADIO FCC ID: K95KNGP800C IC: 2116A-KNGP800C Report: Z:\R\RELM_K95\961AUT11\Extra961AUT11\K95KNGP800C-Report (3).doc Page 5 of 64 EQUIPMENT LIST Device Manufacturer Model Serial Number Cal/Char Date Due Date Power Meter Rohde & Schwarz NRT 102870 01/11/10 01/11/12 Power Sensor Rohde & Schwarz NRT-Z14 100100 01/11/10 01/11/12 Spectrum Analyzer Hewlett Packard 8562E 08471 02/25/11 02/25/12 RF Communication Test Set Hewlett Packard 8920B US39225186 03/11/11 03/11/12 Dynamic Signal Analyzer Hewlett Packard 35670A MY42506203 03/11/11 03/11/12 Spectrum Analyzer Tektronix 3308A J300156 10/08/10 10/08/11 Oscilloscope Tektronix MSO4104 C001715 03/21/11 03/21/13 …

Text truncated - open the document above for the full version.