KA2AP1650A1Wireless AC1200 Dual Band Gigabit Range Extender

QUICK INSTALLATION GUIDE Wireless AC1200 DuAl B AnD Gi GAB it rA nGe extenDer DAP-1650 КратКое руКоводство по установКе Guía de InstalacIón RápIda GuIa de Instalação RápIda 快速安裝指南 petunjuk pemasanGan cepat DAP-1650 2 ENGLISH CONTENTS OF PACKAGING POWER ADAPTER 12V / 2a ETHERNET CABLE (CAT5 UTP) connect tHe RanGe eXtendeR to YouR pc duRInG setup If any of these items are missing from your packaging, contact your reseller. WI-FI CONFIGURATION NOTE contaIns tHe deFault WI-FI InFoRmatIon Wi-Fi Configuration Note WIRELESS AC1200 DUAL B AND G IGABIT R ANGE Ex TENDER dap-1650 CO ntents DAP-1650 3 ENGLISH PRODUCT SETUP ADVAnCeD setuP (ACCess V iA iP ADDress) to configure dap-1650 manually connect your computer to the dap-1650 using the ethernet cable provided. then connect the power cable on the dap-1650. the power light will display as solid green. then simply open a browser window and enter the Ip address in the browser address field: Ip addRess: http://dlinkap.local or http://192.168.0.50 useRname: admin passWoRd: If you have more than one access point, enter http://dlinkapxxxx (the xxxx are the last four digits of the ap’s mac address which is located on the bottom of the device in the label). eAsY setuP CONNECT TO YOUR PC use the included ethernet cable to connect the dap-1650 to your desktop or laptop pc. connect the power adapter to the dap-1650. Wait until the power led changes from orange to green. CONFIGURE THE DAP-1650 open a web browser and go to http://dlinkap.local (or dlinkxxxx (the last four digits of MAC address)). the default user name is admin, and the default password is blank. now you can use the setup wizard to configure ap, mediaBridge or Repeater mode on your dap-1650. POSITION THE RANGE ExTENDER place the range extender in an open area of your intended work area for better wireless coverage. User Name xxxx Password Login DAP-1650 4 ENGLISH TROUBLESHOOTING setuP A nD COnFiGur Ati On P rOB le Ms 1. HOW DO I CONFIGURE MY DAP-1650 AP WITHOUT THE CD, OR CHECK MY WIRELESS NETWORK NAME (SSID) AND WIRELESS ENCRYPTION KEY? - connect your pc to the range extender using an ethernet cable. - open a web browser and enter the address http://dlinkap.local or http://192.168.0.50 - the default username is ‘admin’. the default password is ‘’ (leave the field blank). - If you have changed the password and can not remember it, you will need to reset the ap to set the password back to ‘’ (leave the field blank). 2. HOW DO I RESET MY DAP-1650 AP TO FACTORY DEFAULT SETTINGS? - ensure the range extender is powered on. - press and hold the reset button on the rear of the device for 5 seconds. note: Resetting the range extender to factory default will erase the current configuration settings. to re-configure your settings, log into the rangeextender as outlined in question 1, then run the setup Wizard. 3. HOW DO I ADD A NEW WIRELESS CLIENT OR PC IF I HAVE FORGOTTEN MY WIRELESS NETWORK NAME (SSID) OR WIRELESS ENCRYPTION KEY? - every pc that needs to connect to the range extender wirelessly, you will need to ensure you use the correct Wireless network name (ssId) and encryption key. - use the web based user interface (as described in question 1 above) to check or choose your wireless settings. - make sure you write down these settings so that you can enter them into each wirelessly connected pc. You will find a dedicated area on the back of this document, this important information for future use. DAP-1650 5 ENGLISH te CH ni CA l su PPO rt Australia: tel: 1300-766-868 24/7 technical support Web: http://www.dlink.com.au e-mail: [email protected] India: tel: +91-22-27626600 t oll Free 1800-22-8998 Web: www.dlink.co.in e-mail: [email protected] Singapore, Thailand, Indonesia, Malaysia, Philippines, Vietnam: singapore - www.dlink.com.sg thailand - www.dlink.co.th Indonesia - www.dlink.co.id malaysia - www.dlink.com.my philippines - www.dlink.com.ph Vietnam - www.dlink.com.vn Korea: tel : +82-2-2028-1810 monday to Friday 9:00am to 6:00pm Web : http://d-link.co.kr e-mail : [email protected] New Zealand: tel: 0800-900-900 24/7 technical support Web: http://www.dlink.co.nz e-mail: [email protected] South Africa and Sub Sahara Region: tel: +27 12 661 2025 08600 dlInk (for south africa only) monday to Friday 8:30am to 9:00pm south africa time Web: http://www.d-link.co.za e-mail: [email protected] Saudi Arabia (KSA): tel: +966 01 217 0008 Fax: +966 01 217 0009 saturday to Wednesday 9.30am to 6.30pm thursdays 9.30am to 2.00 pm e-mail: [email protected] D-Link Middle East - Dubai, U.A.E. plot no. s31102, jebel ali Free Zone south, p.o.Box 18224, dubai, u.a.e. tel: +971-4-8809022 Fax: +971-4-8809066 / 8809069 technical support: +971-4-8809033 General Inquiries: [email protected] tech support: [email protected] Egypt 1, makram ebeid street - city lights Building nasrcity - cairo, egypt Floor 6, office c2 tel.: +2 02 26718375 - +2 02 26717280 technical support: +2 02 26738470 General Inquiries: [email protected] tech support: [email protected] Kingdom of Saudi Arabia office # 84 , al khaleej Building ( mujamathu al-khaleej) opp. king Fahd Road, olaya Riyadh - saudi arabia tel: +966 1 217 0008 technical support: +966 1 2170009 / +966 2 6522951 General Inquiries: [email protected] tech support: [email protected] Pakistan Islamabad office: 61-a, jinnah avenue, Blue area, suite # 11, eBc, saudi pak tower, Islamabad - pakistan tel.: +92-51-2800397, 2800398 Fax: +92-51-2800399 karachi office: d-147/1, kda scheme # 1, opposite mudassir park, karsaz Road, karachi – pakistan phone: +92-21-34548158, 34326649 Fax: +92-21-4375727 technical support: +92-21-34548310, 34305069 General Inquiries: [email protected] tech support: [email protected] You can find software updates and user documentation on the d-link website. Tech Support for customers in DAP-1650 6 ENGLISH te CH ni CA l su PPO rt Iran unit 5, 5th Floor, no. 20, 17th alley , Bokharest st. , argentine sq. , tehran IRan…

Text truncated - open the document above for the full version.

Report No.: 130207E02D Page 1 Reference No.: 130530E06, 130614E12 CONSTRUCTION PHOTOS OF EUT Report No.: 130207E02D Page 2 Reference No.: 130530E06, 130614E12 Adapter 1 (Model: SAG024F 4 US) Report No.: 130207E02D Page 3 Reference No.: 130530E06, 130614E12 Report No.: 130207E02D Page 4 Reference No.: 130530E06, 130614E12 Adapter 2 (Model: AMS4-1202000FU) Report No.: 130207E02D Page 5 Reference No.: 130530E06, 130614E12 Report No.: 130207E02D Page 6 Reference No.: 130530E06, 130614E12 Adapter 3 (Model: AMS3-1202000FU) Report No.: 130207E02D Page 7 Reference No.: 130530E06, 130614E12

Brand : D‐Link Model name : DAP‐1650

Report No.: 130207E02D Page 1 Reference No.: 130530E06, 130614E12 CONSTRUCTION PHOTOS OF EUT Report No.: 130207E02D Page 2 Reference No.: 130530E06, 130614E12 Report No.: 130207E02D Page 3 Reference No.: 130530E06, 130614E12 Report No.: 130207E02D Page 4 Reference No.: 130530E06, 130614E12 Report No.: 130207E02D Page 5 Reference No.: 130530E06, 130614E12 Report No.: 130207E02D Page 6 Reference No.: 130530E06, 130614E12 Report No.: 130207E02D Page 7 Reference No.: 130530E06, 130614E12

Report No.: SA130207E02D 1 of 6 Report Format Version 5.0.0 Reference No.: 130614E12 RF EXPOSURE REPORT REPORT NO.: SA130207E02D MODEL NO.: DAP-1650 FCC ID: KA2AP1650A1 RECEIVED: Feb. 07, 2013 TESTED: Feb. 18, 2013 ISSUED: July 26, 2013 APPLICANT: D-Link Corporation ADDRESS: No.289, Sinhu 3rd Rd., Neihu District, Taipei City 114, Taiwan, R.O.C. ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS: No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. This report should not be used by the client to claim product certification, approval, or endorsement by any government agencies. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification Report No.: SA130207E02D 2 of 6 Report Format Version 5.0.0 Reference No.: 130614E12 TABLE OF CONTENTS RELEASE CONTROL RECORD .................................................................................... 3 1. CERTIFICATION ...................................................................................................... 4 2. RF EXPOSURE LIMIT .............................................................................................. 5 3. MPE CALCULATION FORMULA ............................................................................. 5 4. CLASSIFICATION .................................................................................................... 5 5. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER ........................... 6 Report No.: SA130207E02D 3 of 6 Report Format Version 5.0.0 Reference No.: 130614E12 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED SA130207E02D Original release July 26, 2013 Report No.: SA130207E02D 4 of 6 Report Format Version 5.0.0 Reference No.: 130614E12 1. CERTIFICATION PRODUCT: Wireless AC1200 Dual Band Gigabit Range Extender BRAND NAME: D-Link MODEL NO.: DAP-1650 TEST SAMPLE: R&D SAMPLE APPLICANT: D-Link Corporation TESTED DATE: Feb. 18, 2013 STANDARDS: FCC Part 2 (Section 2.1091) FCC OET Bulletin 65, Supplement C (01-01) IEEE C95.1 The above equipment (Model: DAP-1650) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE: June 28, 2013 ( Elsie Hsu, Specialist ) APPROVED BY : , DATE: June 28, 2013 ( May Chen, Manager ) Report No.: SA130207E02D 5 of 6 Report Format Version 5.0.0 Reference No.: 130614E12 2. RF EXPOSURE LIMIT LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) FREQUENCY RANGE (MHz) ELECTRIC FIELD STRENGTH (V/m) MAGNETIC FIELD STRENGTH (A/m) POWER DENSITY (mW/cm 2 ) AVERAGE TIME (minutes) LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE 300-1500 ... ... F/1500 30 1500-100,000 ... ... 1.0 30 F = Frequency in MHz 3. MPE CALCULATION FORMULA Pd = (Pout*G) / (4*pi*r 2 ) where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale pi = 3.1416 r = distance between observation point and center of the radiator in cm 4. CLASSIFICATION The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. Report No.: SA130207E02D 6 of 6 Report Format Version 5.0.0 Reference No.: 130614E12 5. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER For 15.247(2.4GHz): FREQUENCY (MHz) MAX POWER (mW) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/ cm 2 ) LIMIT (mW/cm 2 ) 2412-2462 372.812 2.94 20 0.14596 1 For 15.247(5GHz): FREQUENCY (MHz) MAX POWER (mW) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/ cm 2 ) LIMIT (mW/cm 2 ) 5745 ~ 5825 193.951 2.25 20 0.06478 1 For 15.407(5GHz): FREQUENCY (MHz) MAX POWER (mW) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/ cm 2 ) LIMIT (mW/cm 2 ) 5180 ~ 5240 46.351 2.25 20 0.01578 1 CONCLUSION: Both of the 2.4GHz and 5GHz WLAN can transmit simultaneously, the formula of calculated the MPE is: CPD 1 / LPD 1 + CPD 2 / LPD 2 + ......etc. < 1 CPD = Calculation power density LPD = Limit of power density Therefore, the worst-case situation is 0.14596 / 1 + 0.06478 / 1 = 0.211, which is less than “1”. This confirmed that the device comply with FCC 1.1310 MPE limit. --- END ---

Report No.: RF130207E02D 1 of 111 Report Format Version 5.1.0 Reference No.: 130530E06, 130614E12 FCC TEST REPORT (15.247) REPORT NO.: RF130207E02D MODEL NO.: DAP-1650 FCC ID: KA2AP1650A1 RECEIVED: Feb. 07, 2013 TESTED: Feb. 08 to 19, 2013 and June 04 to 21, 2013 ISSUED: July 26, 2013 APPLICANT: D-Link Corporation ADDRESS: No.289, Sinhu 3rd Rd., Neihu District, Taipei City 114, Taiwan, R.O.C. ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS : No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (1): No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (2): No. 49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification Report No.: RF130207E02D 2 of 111 Report Format Version 5.1.0 Reference No.: 130530E06, 130614E12 Table of Contents RELEASE CONTROL RECORD ........................................................................................ 5 1. CERTIFICATION .................................................................................................... 6 2. SUMMARY OF TEST RESULTS ............................................................................ 7 2.1 MEASUREMENT UNCERTAINTY .......................................................................... 8 3. GENERAL INFORMATION ..................................................................................... 9 3.1 GENERAL DESCRIPTION OF EUT ....................................................................... 9 3.2 DESCRIPTION OF TEST MODES ....................................................................... 13 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ........................ 14 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS ....................................... 17 3.4 DESCRIPTION OF SUPPORT UNITS .................................................................. 18 3.5 CONFIGURATION OF SYSTEM UNDER TEST ................................................... 19 4. TEST TYPES AND RESULTS (for 2.4GHz, 2.400 ~ 2.4835GHz Band) ................ 20 4.1 CONDUCTED EMISSION MEASUREMENT ........................................................ 20 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT ...................................... 20 4.1.2 TEST INSTRUMENTS .......................................................................................... 20 4.1.3 TEST PROCEDURES .......................................................................................... 22 4.1.4 DEVIATION FROM TEST STANDARD ................................................................. 22 4.1.5 TEST SETUP ....................................................................................................... 22 4.1.6 EUT OPERATING CONDITIONS ......................................................................... 23 4.1.7 TEST RESULTS (MODE 1) .................................................................................. 24 4.1.8 TEST RESULTS (MODE 2) .................................................................................. 26 4.1.9 TEST RESULTS (MODE 3) .................................................................................. 28 4.2 RADIATED EMISSION AND BANDEDGE MEASUREMENT ................................ 30 4.2.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT .............. 30 4.2.2 TEST INSTRUMENTS .......................................................................................... 31 4.2.3 TEST PROCEDURES .......................................................................................... 33 4.2.4 DEVIATION FROM TEST STANDARD ................................................................. 33 4.2.5 TEST SETUP ....................................................................................................... 34 4.2.6 EUT OPERATING CONDITIONS ......................................................................... 34 4.2.7 TEST RESULTS ................................................................................................... 35 4.3 6dB BANDWIDTH MEASUREMENT .................................................................... 48 4.3.1 LIMITS OF 6dB BANDWIDTH MEASUREMENT .................................................. 48 4.3.2 TEST INSTRUMENTS .......................................................................................... 48 4.3.3 TEST PROCEDURE ............................................................................................. 48 4.3.4 DEVIATION FROM TEST STAN…

Text truncated - open the document above for the full version.

Report No.: RF130207E02D-1 1 of 60 Report Format Version 5.1.0 Reference No.: 130530E06, 130614E12 FCC TEST REPORT (15.407) REPORT NO.: RF130207E02D-1 MODEL NO.: DAP-1650 FCC ID: KA2AP1650A1 RECEIVED: Feb. 07, 2013 TESTED: Feb. 08 to 19, 2013 and June 04 to 21, 2013 ISSUED: July 26, 2013 APPLICANT: D-Link Corporation ADDRESS: No.289, Sinhu 3rd Rd., Neihu District, Taipei City 114, Taiwan, R.O.C. ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS : No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (1): No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (2): No. 49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification Report No.: RF130207E02D-1 2 of 60 Report Format Version 5.1.0 Reference No.: 130530E06, 130614E12 Table of Contents RELEASE CONTROL RECORD..............................................................................4 1. CERTIFICATION ...........................................................................................5 2. SUMMARY OF TEST RESULTS ...................................................................6 2.1 MEASUREMENT UNCERTAINTY ................................................................7 3. GENERAL INFORMATION ...........................................................................8 3.1 GENERAL DESCRIPTION OF EUT ..............................................................8 3.2 DESCRIPTION OF TEST MODES ..............................................................12 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ..............13 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS .............................15 3.4 DUTY CYCLE OF TEST SIGNAL................................................................16 3.5 DESCRIPTION OF SUPPORT UNITS ........................................................17 3.6 CONFIGURATION OF SYSTEM UNDER TEST .........................................18 4. TEST TYPES AND RESULTS .....................................................................19 4.1 CONDUCTED EMISSION MEASUREMENT ..............................................19 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT ............................19 4.1.2 TEST INSTRUMENTS ................................................................................19 4.1.3 TEST PROCEDURES .................................................................................21 4.1.4 DEVIATION FROM TEST STANDARD .......................................................21 4.1.5 TEST SETUP ..............................................................................................21 4.1.6 EUT OPERATING CONDITIONS ................................................................22 4.1.7 TEST RESULTS (MODE 1) .........................................................................23 4.1.8 TEST RESULTS (MODE 2) .........................................................................25 4.1.9 TEST RESULTS (MODE 3) .........................................................................27 4.2 RADIATED EMISSION AND BANDEDGE MEASUREMENT ......................29 4.2.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT ...29 4.2.2 LIMITS OF UNWANTED EMISSION OUT OF THE RESTRICTED BANDS29 4.2.3 TEST INSTRUMENTS ................................................................................30 4.2.4 TEST PROCEDURES .................................................................................32 4.2.5 DEVIATION FROM TEST STANDARD .......................................................32 4.2.6 TEST SETUP ..............................................................................................33 4.2.7 EUT OPERATING CONDITION ..................................................................33 4.2.8 TEST RESULTS ..........................................................................................34 4.3 TRANSMIT POWER MEASUREMENT .......................................................44 4.3.1 LIMITS OF TRANSMIT POWER MEASUREMENT ....................................44 4.3.2 TEST INSTRUMENTS ................................................................................44 4.3.3 TEST PROCEDURE ...................................................................................45 4.3.4 DEVIATION FROM TEST STANDARD .......................................................46 4.3.5 TEST SETUP ..............................................................................................46…

Text truncated - open the document above for the full version.

Report No.: 120927E07 1 of 4 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST (Mode 1) Report No.: 120927E07 2 of 4 CONDUCTED EMISSION TEST (Mode 2) Report No.: 120927E07 3 of 4 CONDUCTED EMISSION TEST (Mode 3) Report No.: 120927E07 4 of 4 RADIATED EMISSION TEST