KA2CHG021A1Wireless smart hub

Operational Description

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2 Page 3 Page 4

Location as below: Label format:

Page 5 Page 6 Page 7 Page 8 Page 9 Page 10

Report No.: SA140729C08 1 of 6 Report Format Version 5.0.1 RF EXPOSURE REPORT REPORT NO.: SA140729C08 MODEL NO.: DCH-G021 FCC ID: KA2CHG021A1 RECEIVED: Jul. 29, 2014 TESTED: Aug. 30 ~ Sep. 16, 2014 ISSUED: Sep. 17, 2014 APPLICANT: D-LINK CORPORA TION ADDRESS: 17595 Mt. Hermann, Fountain Valley, CA 92708, U.S.A. ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan ( R.O.C. ) TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. Report No.: SA140729C08 2 of 6 Report Format Version 5.0.1 TABLE OF CONTENTS RELEASE CONTROL RECORD ................................................................................................ 3 1. CERTIFICATION ............................................................................................................. 4 2. RF EXPOSURE ............................................................................................................... 5 2.1 LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) ......................................... 5 2.2 MPE CALCULATION FORMULA .................................................................................... 5 2.3 CLASSIFICATION ........................................................................................................... 5 2.4 CALCULATION RESULT OF MAXIMUM CONDUCTED POWER .................................. 6 Report No.: SA140729C08 3 of 6 Report Format Version 5.0.1 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED SA140729C08 Original release Sep. 17, 2014 Report No.: SA140729C08 4 of 6 Report Format Version 5.0.1 1. CERTIFICATION PRODUCT: Wireless smart hub MODEL: DCH-G021 BRAND: D-Link APPLICANT: D-LINK CORPORATION TESTED: Aug. 30 ~ Sep. 16, 2014 TEST SAMPLE: ENGINEERING SAMPLE STANDARDS: FCC Part 2 (Section 2.1091) KDB 447498 D03 IEEE C95.1 The above equipment (Model: DCH-G021) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE:Sep. 17, 2014 Polly Chien / Specialist APPROVED BY : , DATE:Sep. 17, 2014 Ken Liu / Senior Manager Report No.: SA140729C08 5 of 6 Report Format Version 5.0.1 2. RF EXPOSURE 2.1 LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) FREQUENCY RANGE (MHz) ELECTRIC FIELD STRENGTH (V/m) MAGNETIC FIELD STRENGTH (A/m) POWER DENSITY (mW/cm 2 ) AVERAGE TIME (minutes) LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE 300-1500 ... ... F/1500 30 1500-100,000 ... ... 1.0 30 F = Frequency in MHz 2.2 MPE CALCULATION FORMULA Pd = (Pout*G) / (4*pi*r 2 ) where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 2.3 CLASSIFICATION The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. Report No.: SA140729C08 6 of 6 Report Format Version 5.0.1 2.4 CALCULATION RESULT OF MAXIMUM CONDUCTED POWER Mode Frequency band (MHz) Conducted power (mW) Conducted power (dBm) Antenna Gain (dBi) POWER DENSITY (mW/cm 2 ) LIMIT (mW/cm 2 ) WiFi 2.4G 2412~2462 274.157 24.382.100.0881 BT EDR 2402~2480 9.0169.552.100.0031 Zigbee 2405 ~ 2475 79.433 19.00 1.72 0.023 1 **Zigb ee can transmit simultaneouly with WLAN or BT but not WLAN and BT. WLAN and BT cannot transmit at the same time. CONCULSION: Zigbee can transmit simultaneouly with WLAN or BT, the formula of the calculated MPE is: CPD1 / LPD1 + CPD2 / LPD2 + ......etc. < 1 CPD = Calculation power density LPD = Limit of power density Conducted power: WiFi 2.4G + Zigbee = 274.157 + 79.433 = 353.59(mW)= 25.48(dBm) < 30(dBm) BT EDR + Zigbee = 9.016 + 79.433 = 88.449(mW)= 19.47(dBm) < 30(dBm) Power density: WiFi 2.4G + Zigbee = 0.088 + 0.023 = 0.111 BT EDR + Zigbee = 0.003 + 0.023 = 0.026 Therefore the maximum calculations of the above situations are less than the “1” limit. --- END ---

Report No.: RF140729C08-1 1 of 49 Report Format Version 5.0.0 FCC TEST REPORT (15.247_BLUETOOTH) REPORT NO.: RF140729C08-1 MODEL NO.: DCH-G021 FCC ID: KA2CHG021A1 RECEIVED: Jul. 29, 2014 TESTED: Aug. 20 ~ Sep. 16, 2014 ISSUED: Sep. 16, 2014 APPLICANT: D-LINK CORPORATION ADDRESS: 17595 Mt. Hermann, Fountain Valley, CA 92708, U.S.A. ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the com pliance or non-compliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF140729C08-1 2 of 49 Report Format Version 5.0.0 Table of Contents RELEASE CONTROL RECORD .............................................................................................................. 4 1. CERTIFICATION ........................................................................................................................... 5 2. SUMMARY OF TEST RESULTS .................................................................................................. 6 2.1 MEASUREMENT UNCERTAINTY ................................................................................................ 6 3. GENERAL INFORMATION ........................................................................................................... 7 3.1 GENERAL DESCRIPTION OF EUT ............................................................................................. 7 3.2 DESCRIPTION OF TEST MODES ............................................................................................... 8 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ............................................... 9 3.3 DESCRIPTION OF SUPPORT UNITS ....................................................................................... 11 3.3.1 CONFIGURATION OF SYSTEM UNDER TEST ........................................................................ 11 3.4 GENERAL DESCRIPTION OF APPLIED STANDARDS ............................................................ 12 4. TEST TYPES AND RESULTS .................................................................................................... 13 4.1 RADIATED EMISSION AND BANDEDGE MEASUREMENT .................................................... 13 4.1.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT .................................. 13 4.1.2 TEST INSTRUMENTS ................................................................................................................ 14 4.1.3 TEST PROCEDURES ................................................................................................................ 15 4.1.4 DEVIATION FROM TEST STANDARD ...................................................................................... 15 4.1.5 TEST SETUP .............................................................................................................................. 16 4.1.6 EUT OPERATING CONDITIONS ............................................................................................... 16 4.1.7 TEST RESULTS ......................................................................................................................... 17 4.2 CONDUCTED EMISSION MEASUREMENT ............................................................................. 26 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT .......................................................... 26 4.2.2 TEST INSTRUMENTS ................................................................................................................ 26 4.2.3 TEST PROCEDURES ................................................................................................................ 27 4.2.4 DEVIATION FROM TEST STANDARD ...................................................................................... 27 4.2.5 TEST SETUP .............................................................................................................................. 28 4.2.6 EUT OPERATING CONDITIONS ............................................................................................... 28 4.2.7 TEST RESULTS ......................................................................................................................... 29 4.3 NUMBER OF HOPPING FREQUENCY USED .......................................................................... 31 4.3.1 LIMIT OF HOPPING FREQUENCY USED ................................................................................ 31 4.3.2 TEST SETUP ...................................................................…

Text truncated - open the document above for the full version.

Report No.: RF140729C08 1 of 50 Report Format Version 5.2.1 FCC TEST REPORT (15.247_WLAN) REPORT NO.: RF140729C08 MODEL NO.: DCH-G021 FCC ID: KA2CHG021A1 RECEIVED: Jul. 29, 2014 TESTED: Aug. 30 ~ Sep. 16, 2014 ISSUED: Sep. 16, 2014 APPLICANT: D-LINK CORPORATION ADDRESS: 17595 Mt. Hermann, Fountain Valley, CA 92708, U.S.A. ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-com pliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF140729C08 2 of 50 Report Format Version 5.2.1 TABLE OF CONTENTS RELEASE CONTROL RECORD ................................................................................................................ 4 1. CERTIFICATION ............................................................................................................................ 5 2. SUMMARY OF TEST RESULTS ................................................................................................... 6 2.1 MEASUREMENT UNCERTAINTY ................................................................................................ 6 3. GENERAL INFORMATION ............................................................................................................ 7 3.1 GENERAL DESCRIPTION OF EUT .............................................................................................. 7 3.2 DESCRIPTION OF TEST MODES ................................................................................................ 8 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ................................................ 9 3.3 DUTY CYCLE OF TEST SIGNAL ................................................................................................ 11 3.4 DESCRIPTION OF SUPPORT UNITS ........................................................................................ 12 3.4.1 CONFIGURATION OF SYSTEM UNDER TEST ......................................................................... 12 3.5 GENERAL DESCRIPTION OF APPLIED STANDARDS ............................................................. 13 4. TEST TYPES AND RESULTS ..................................................................................................... 14 4.1 RADIATED EMISSION AND BANDEDGE MEASUREMENT ..................................................... 14 4.1.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT ................................... 14 4.1.2 TEST INSTRUMENTS ................................................................................................................. 15 4.1.3 TEST PROCEDURES ................................................................................................................. 16 4.1.4 DEVIATION FROM TEST STANDARD ....................................................................................... 16 4.1.5 TEST SETUP ............................................................................................................................... 17 4.1.6 EUT OPERATING CONDITIONS ................................................................................................ 18 4.1.7 TEST RESULTS .......................................................................................................................... 19 4.2 CONDUCTED EMISSION MEASUREMENT .............................................................................. 29 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT ........................................................... 29 4.2.2 TEST INSTRUMENTS ................................................................................................................. 29 4.2.3 TEST PROCEDURES ................................................................................................................. 30 4.2.4 DEVIATION FROM TEST STANDARD ....................................................................................... 30 4.2.5 TEST SETUP ............................................................................................................................... 30 4.2.6 EUT OPERATING CONDITIONS ................................................................................................ 30 4.2.7 TEST RESULTS .......................................................................................................................... 31 4.3 6dB BANDWIDTH MEASUREMENT .......................................................................................... 33 4.3.1 LIMITS OF 6dB BANDWIDTH MEASUREMENT ........…

Text truncated - open the document above for the full version.

Report No.: RF140729C08-2 1 of 38 Report Format Version 5.2.1 FCC TEST REPORT (15.247_ZIGBEE) REPORT NO.: RF140729C08-2 MODEL NO.: DCH-G021 FCC ID: KA2CHG021A1 RECEIVED: Jul. 29, 2014 TESTED: Sep. 01 ~ Sep. 16, 2014 ISSUED: Sep. 17, 2014 APPLICANT: D-LINK CORPORATION ADDRESS: 17595 Mt. Hermann, Fountain Valley, CA 92708, U.S.A. ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-com pliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF140729C08-2 2 of 38 Report Format Version 5.2.1 TABLE OF CONTENTS RELEASE CONTROL RECORD ................................................................................................................ 4 1. CERTIFICATION ............................................................................................................................ 5 2. SUMMARY OF TEST RESULTS ................................................................................................... 6 2.1 MEASUREMENT UNCERTAINTY ................................................................................................ 6 3. GENERAL INFORMATION ............................................................................................................ 7 3.1 GENERAL DESCRIPTION OF EUT .............................................................................................. 7 3.2 DESCRIPTION OF TEST MODES ................................................................................................ 8 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ................................................ 9 3.3 DUTY CYCLE OF TEST SIGNAL ................................................................................................ 11 3.4 DESCRIPTION OF SUPPORT UNITS ........................................................................................ 12 3.4.1 CONFIGURATION OF SYSTEM UNDER TEST ......................................................................... 12 3.5 GENERAL DESCRIPTION OF APPLIED STANDARDS ............................................................. 13 4. TEST TYPES AND RESULTS ..................................................................................................... 14 4.1 RADIATED EMISSION AND BANDEDGE MEASUREMENT ..................................................... 14 4.1.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT ................................... 14 4.1.2 TEST INSTRUMENTS ................................................................................................................. 15 4.1.3 TEST PROCEDURES ................................................................................................................. 16 4.1.4 DEVIATION FROM TEST STANDARD ....................................................................................... 16 4.1.5 TEST SETUP ............................................................................................................................... 17 4.1.6 EUT OPERATING CONDITIONS ................................................................................................ 18 4.1.7 TEST RESULTS .......................................................................................................................... 19 4.2 CONDUCTED EMISSION MEASUREMENT .............................................................................. 23 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT ........................................................... 23 4.2.2 TEST INSTRUMENTS ................................................................................................................. 23 4.2.3 TEST PROCEDURES ................................................................................................................. 24 4.2.4 DEVIATION FROM TEST STANDARD ....................................................................................... 24 4.2.5 TEST SETUP ............................................................................................................................... 24 4.2.6 EUT OPERATING CONDITIONS ................................................................................................ 24 4.2.7 TEST RESULTS .......................................................................................................................... 25 4.3 6dB BANDWIDTH MEASUREMENT .......................................................................................... 27 4.3.1 LIMITS OF 6dB BANDWIDTH MEASUREMENT …

Text truncated - open the document above for the full version.

Report No.: RF140729C08-3 1 of 39 Report Format Version 5.0.0 FCC TEST REPORT (Z-WAVE) REPORT NO.: RF140729C08-3 MODEL NO.: DCH-G021 FCC ID: KA2CHG021A1 RECEIVED: Jul. 29, 2014 TESTED: Sep. 01 ~ Sep. 16, 2014 ISSUED: Sep. 18, 2014 APPLICANT : D-LINK CORPORATION ADDRESS : 17595 Mt. Hermann, Fountain Valley, CA 92708, U.S.A ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan ( R.O.C. ) TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the com pliance or non-compliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF140729C08-3 2 of 39 Report Format Version 5.0.0 Table of Contents RELEASE CONTROL RECORD .............................................................................................................. 3 1. CERTIFICATION .......................................................................................................................... 4 2. SUMMARY OF TEST RESULTS ................................................................................................. 5 2.1 MEASUREMENT UNCERTAINTY .............................................................................................. 5 3. GENERAL INFORMATION .......................................................................................................... 6 3.1 GENERAL DESCRIPTION OF EUT ............................................................................................ 6 3.2 DESCRIPTION OF TEST MODES .............................................................................................. 7 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL .............................................. 8 3.3 DESCRIPTION OF SUPPORT UNITS ...................................................................................... 10 3.3.1 CONFIGURATION OF SYSTEM UNDER TEST ....................................................................... 10 3.4 GENERAL DESCRIPTION OF APPLIED STANDARDS ............................................................ 11 4. TEST TYPES AND RESULTS ................................................................................................... 12 4.1 RADIATED EMISSION AND BAND EDGE MEASUREMENT .................................................. 12 4.1.1 LIMITS OF RADIATED EMISSION MEASUREMENT .............................................................. 12 4.1.2 TEST INSTRUMENTS ............................................................................................................... 13 4.1.3 TEST PROCEDURES ............................................................................................................... 14 4.1.4 DEVIATION FROM TEST STANDARD ..................................................................................... 14 4.1.5 TEST SETUP ............................................................................................................................. 15 4.1.6 EUT OPERATING CONDITIONS .............................................................................................. 15 4.1.7 TEST RESULTS ........................................................................................................................ 16 4.2 CONDUCTED EMISSION MEASUREMENT ............................................................................ 28 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT ......................................................... 28 4.2.2 TEST INSTRUMENTS ............................................................................................................... 28 4.2.3 TEST PROCEDURES ............................................................................................................... 29 4.2.4 DEVIATION FROM TEST STANDARD ..................................................................................... 29 4.2.5 TEST SETUP ............................................................................................................................. 30 4.2.6 EUT OPERATING CONDITIONS .............................................................................................. 30 4.2.7 TEST RESULTS ........................................................................................................................ 31 5. PHOTOGRAPHS OF THE TEST CONFIGURATION ............................................................... 37 6. INFORMATION ON THE TESTING LABORATORIES .............................................................. 38 7. APPENDIX A - MODIFICATIONS RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB ...................................…

Text truncated - open the document above for the full version.

1 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST 2 RADIATED EMISSION TEST (X-plane) 3 (Y-plane) 4 (Z-plane)