KA2CS8635LHA12K QHD Pan & Zoom Outdoor Wi-Fi Camera

DCS-8635LH 2K QHD Pan & Zoom Outdoor Wi-Fi Camera User Manual 04/09/2021 Hardware: A1 Manual Version: 1.00 D-Link DCS-8635LH User Manual i Manual Overview D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes. Information in this document may become obsolete as our services and websites develop and change. Please refer to the www.mydlink.com website for the most current information. Manual Revisions Revision Date Description 1.00 04/09/2021 Initial release Trademarks D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other countries. All other company or product names mentioned herein are trademarks or registered trademarks of their respective companies. Copyright © 2021 by D-Link Corporation, Inc. All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission from D-Link Corporation, Inc. D-Link DCS-8635LH User Manual ii Table of Contents Table of Contents Product Overview ....................................................... 1 Package Contents .......................................... 1 Introduction ..............................................2 System Requirements ...................................... 2 Hardware Overview............................................. 3 Front ..................................................3 Bottom ................................................4 LED Behavior ........................................... 5 Installation ................................................................. 6 Safety......................................................6 Before You Begin ............................................ 6 Wireless Installation Considerations ......................... 7 mydlink App Camera Setup ................................ 8 Device Placement .............................................. 10 Mounting the Camera ..................................... 11 Pole Mounting ......................................... 11 Wall/ Ceiling Mounting ............................... 12 Using the mydlink App .............................................. 14 Controlling Your Device ................................... 14 Device Settings ............................................ 16 Troubleshooting ....................................................... 18 Technical Specifications ............................................ 19 Regulatory Information ............................................ 21 Section 1 - Product Overview D-Link DCS-8635LH User Manual 1 Product Overview Package Contents 2K QHD Pan & Zoom Outdoor Wi-Fi Camera Accessories Power Adapter Quick Installation Guide Cable Ties If any of the above items are missing, please contact your reseller. Note: Using a power supply with a different voltage rating than the one included with your product will cause damage and void the warranty for this product. Section 1 - Product Overview D-Link DCS-8635LH User Manual 2 Introduction No more struggles to find the perfect angle, the DCS-8635LH lets you adjust your camera a full 270-degrees. With vivid QHD 1440p resolution @ 25fps per second, you’ll never miss a moment, and what’s more – built-in AI-based Person Detection cleverly identifies human motion, so you only get alerts when it matters most. Enhanced sound and motion detection help with the heavy lifting and with built-in Bluetooth Low Energy (BLE) technology - it’s one of our easiest cameras to set up yet! System Requirements Network Requirements • 10/100 Ethernet network or 802.11n/ac wireless network • An Internet connection • A router connected to your broadband modem mydlink™ App Requirements • iOS or Android device (please refer to the mobile app's store page to check whether your device is compatible) • Email account (for mydlink service registration) Section 1 - Product Overview D-Link DCS-8635LH User Manual 3 Front Hardware Overview Camera Lens Status LED Light Sensor Microphone Status LED See LED Behavior on page 5 for more information. Microphone Picks up sound near your camera. Light Sensor The IR-Cut removable sensor monitors lighting conditions and switches between color and infrared accordingly. Camera Lens Records video of the surrounding area. Section 1 - Product Overview D-Link DCS-8635LH User Manual 4 Bottom Speaker microSD Card Slot Reset Button Speaker Provides audio playback for the two-way audio feature. microSD Card Slot microSD card slot, supports up to 256 GB. Reset Button Hold the recessed button down to reset the camera to factory default settings. Section 1 - Product Overview D-Link DCS-8635LH User Manual 5 LED Behavior Status LED Status LED Connected to the network and mydlink. Booting up. Ready for set up. Firmware being updated - do not power off. Timeout for setup - please power cycle the device Section 2 - Installation D-Link DCS-8635LH User Manual 6 Installation Safety Please read all of the safety and operating instructions before using device: • Do not open the device or attempt to repair it. • Do not submerge the device in liquid or attempt to clean it with liquids or solvents. To clean the device, disconnect it from the power outlet and use a damp towel to gently wipe it down. Before You Begin Plan the location of your camera: • Verify that your camera is electrically rated to operate with the power available in your location. • Connect the camera's power adapter into an electrical outlet that is not controlled by a wall switch. This will help avoid accidentally turning off power to the device. • Be sure to plug the device into a properly grounded electrical outlet in order to help prevent against electrical shock. • Make sure that the device is firmly mounted. Section 2 - Installation D-Link DCS-8635LH User Manual 7 Wireless Installation Considerations The DCS-8635LH 2K QHD Pan & Zoom Outdoor Wi-Fi Camer…

Text truncated - open the document above for the full version.

The test data, data evaluation, and equipment configuration contained in our test report(s) above was (were) obtained utilizing the test procedures, test instruments, test sites that has been accredited according to the ISO/IEC 17025 quality assessment standard and technical standard(s). The test data contained in the referenced test report relate only to the EUT sample and item(s) tested. Ryan Wang Authorized Signatory BTL INC. No. 29, Jintang Road, Tangzhen Industry Park, Pudong New Area, Shanghai 201210,China TEL: +86-021-61765666 TECHNICAL COMPLIANCE STATEMENT This is to certify that the product listed in follows was (were) tested in the BTL EMC Laboratory to comply with below FCC official limits. Equipment 2K QHD Pan & Zoom Outdoor Wi-Fi Camera Brand Name D-Link Model Name DCS-8635LH Applicant D-Link Corporation Address No.289, Sinhu 3rd Rd, Neihu District, Taipei 114, Taiwan, R.O.C Standard(s) FCC CFR Title 47,Part 15,Subpart B,Class B ANSI C63.4-2014 Report(s) BTL-FCCE-1-2103H005

RF_160, Issue 02 Declaration of Authorization We Name: D-Link Corporation Address: 14420 Myford Road Suite 100 City: Irvine California Country: United States Declare that: Name Representative of agent: Ms. Riley Wei Agent Company name: BTL Inc. Address: No. 29, Jintang Road, Tangzhen Industry Park Pudong New Area City: Shanghai Country: China is authorized to apply for Certification and signing related documents of the following product(s), including 731 form(s): Product description: 2K QHD Pan & Zoom Outdoor Wi-Fi Camera Type designation: DCS-8635LH Trademark: D-Link FCC ID: KA2CS8635LHA1 on our behalf. Date: 2021-05-18 City: Irvine California Name: Shanglin Chung Function: Vice President Signature: . Notes: (1): Required for FCC application (2): For FCC it must be the Grantee Code “owner” or the authorized agent.

D-Link Corporation Ad Hoc Mode Declaration Date: 2021-05-18 We, the undersigned company Company Name: D-Link Corporation Address: 14420 Myford Road Suite 100 Irvine California United States 92606 Declare that: Product description: 2K QHD Pan & Zoom Outdoor Wi-Fi Camera Type designation: DCS-8635LH Brand:D-Link FCC ID: KA2CS8635LHA1 1. The EUT doesn’t have Ad Hoc Mode function on “non-US frequencies”. 802.11a/n Ad Hoc mode should not be supported even on US DFS frequencies (5.25 ~5.35GHz/5.47 ~5.725GHz). 2. In addition, The product meets all other requirements specified in Part 15E Section 15.407 and no configuration controls are provided to change the frequency of operations outside the grant of certification for US operation. 3. Only channels 1~11 will be used in USA. Country code selection is disabled. If you have any questions regarding the authorization, please do not hesitate to contact us, thank you~ Sincerely, Signature: ________________________ Name: Shanglin Chung Tel: +886-2-66000123 #5610 Email: [email protected]

Project No.: 2103H005 Page 1 of 18 ATTACHMENT PHOTOGRAPHS OF EUT Project No.: 2103H005 Page 2 of 18 Project No.: 2103H005 Page 3 of 18 Project No.: 2103H005 Page 4 of 18 Adapter: AMS159A-1201000F Project No.: 2103H005 Page 5 of 18 Project No.: 2103H005 Page 6 of 18 Adapter: KA1201A-1201000DE Project No.: 2103H005 Page 7 of 18

FCC ID: KA2CS8635LHA1 MADE IN CHINA IC: 4216A-CS8635LHA1 M/N: DCS-8635LHA1 CAN ICES-3(B)/NMB-3(B)
 126.4 DCS-8635LH S/N XXXXXXXXXXXXXX : MAC XXXXXXXXXXXX: Input 12V1A: PoIarity: H/W VerA1.: 15mm LEEDARSNO ID      2021.02.02 V1 0. SM DCS-8635LH 19mm 3mm 5mm 7mm 8mm 5.5mm 5mm 7mm  0.5mm 5*5mm

Project No.: 2103H005 Page 8 of 19 Project No.: 2103H005 Page 9 of 19 Project No.: 2103H005 Page 10 of 19 Project No.: 2103H005 Page 11 of 19 Project No.: 2103H005 Page 12 of 19 Project No.: 2103H005 Page 13 of 19 Project No.: 2103H005 Page 14 of 19 Project No.: 2103H005 Page 15 of 19 Project No.: 2103H005 Page 16 of 19 Project No.: 2103H005 Page 17 of 19 2.4G/5G Ant.2 2.4G/5G Ant.1 BLE Ant. Project No.: 2103H005 Page 18 of 19 Project No.: 2103H005 Page 19 of 19

Report No.: BTL-FCCP-5-2103H005 Page 1 of 5 FCC RF EXPOSURE REPORT FCC ID: KA2CS8635LHA1 Project No. : 2103H005 Equipment : 2K QHD Pan & Zoom Outdoor Wi-Fi Camera Brand Name : D-Link Test Model : DCS-8635LH Series Model : N/A Applicant : D-Link Corporation Address : 14420 Myford Road Suite 100 Irvine California United States 92606 Manufacturer : D-Link Corporation Address : 14420 Myford Road Suite 100 Irvine California United States 92606 Date of Receipt : Mar. 09, 2021 Date of Test : Mar. 09, 2021~Apr. 15, 2021 Issued Date : May 19, 2021 Report Version : R01 Test Sample : Engineering Sample No.: SH2021030889 for radiation; SH2021030888 for conducted; SH2021030887-5 for adapter Standard(s) : FCC Guidelines for Human Exposure IEEE C95.1 & FCC Part 2.1091 The above equipment has been tested and found compliance with the requirement of the relative standards by BTL Inc. Prepared by : Maker Qi Approved by : Issac Song Add: No. 29, Jintang Road, Tangzhen Industry Park, Pudong New Area, Shanghai 201210,China TEL: +86-021-61765666 Web: www.newbtl.com Report No.: BTL-FCCP-5-2103H005 Page 2 of 5 REPORT ISSUED HISTORY Report Version Description Issued Date R00 Original Issue. May 13, 2021 R01 Revised report to address TCB’s comments. May 19, 2021 Report No.: BTL-FCCP-5-2103H005 Page 3 of 5 1. MPE CALCULATION METHOD Calculation Method of RF Safety Distance: where: S = power density P = power input to the antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna Table for Filed Antenna For BLE: Ant. Brand Model Name Antenna Type Connector Gain (dBi) 1 N/A N/A PCB N/A 2.85 Note: The antenna gain provided by the manufacturer For 2.4G: Ant. Brand Model Name Antenna Type Connector Gain (dBi) Note 1 N/A N/A IFA N/A 3.14 N/A 2 N/A N/A IFA N/A 4.16 N/A Note: 1. This EUT supports CDD, all antennas have unequal gains, any transmit signals are correlated with each other, so For power spectral density measurements, the Directional gain=10log[(10 G1/20 +10 G2/20 +....+10 GN/20 ) 2 /N ANT ]dBi, that is Directional gain=10log[(10 G1/20 +10 G2/20 +....+10 GN/20 ) 2 /N ANT ]dBi =6.68; Then, the power spectral density limited is 8-6.68+6=7.32, For power meansurements, Directional gain= G ANT MAX.+Array Gain. Array Gain=0dB(N ANT ≤4), so the Directional gain=4.16 2. The antenna gain is provided by the manufacturer. Report No.: BTL-FCCP-5-2103H005 Page 4 of 5 For 5G: Ant. Brand Model Name Antenna Type Connector Gain (dBi) Note 1 N/A N/A IFA N/A 3.87 N/A 2 N/A N/A IFA N/A 3.16 N/A Note: 1. This EUT supports CDD, all antennas have unequal gains, any transmit signals are correlated with each other, so For power spectral density measurements, the Directional gain=10log[(10 G1/20 +10 G2/20 +....+10 GN/20 ) 2 /N ANT ]dBi, that is Directional gain=10log[(10 G1/20 +10 G2/20 +....+10 GN/20 ) 2 /N ANT ]dBi=6.53; Then, the UNII-1 power spectral density limited is 17-6.53+6=16.47, UNII-2A,UNII-2C power spectral density limit is 11-6.53+6=10.47, the UNII-3 power spectral density limit is 30-6.53+6=29.47. For power meansurements, Directional gain= G ANT MAX.+Array Gain.Array Gain=0dB(N ANT ≤4), so the Directional gain=3.87 2. The antenna gain is provided by the manufacturer. Table for Antenna Configuration: For 2.4G: Operating Mode TX Mode Ant. 1 Ant. 2 Ant. 1+2 802.11b    802.11g    802.11n(20 MHz)    802.11n(40 MHz)    For 5G: Operating Mode TX Mode Ant. 1 Ant. 2 Ant. 1+2 IEEE 802.11a    IEEE 802.11n (HT20)    IEEE 802.11n (HT40)    IEEE 802.11ac (VHT20)    IEEE 802.11ac (VHT40)    IEEE 802.11ac (VHT80)    Report No.: BTL-FCCP-5-2103H005 Page 5 of 5 2. TEST RESULTS For BLE: Antenna Gain (dBi) Antenna Gain (numeric) Max. Output Power (dBm) Max. Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Test Result 2.85 1.9275 -2.5 0.5623 0.00022 1 Complies For 2.4GHz: Antenna Gain (dBi) Antenna Gain (numeric) Max. Output Power (dBm) Max. Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Test Result 4.16 2.6062 22 158.4893 0.08217 1 Complies For 5GHz: Antenna Gain (dBi) Antenna Gain (numeric) Max. Output Power (dBm) Max. Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Test Result 3.87 2.4378 22 158.4893 0.07687 1 Complies For the max simultaneous transmission MPE: BLE+2.4G+5G Power Density (S) (mW/cm2) Power Density (S) (mW/cm2) Power Density (S) (mW/cm2) Total Limit of Power Density (S) (mW/cm2) Test Result BLE 2.4GHz 5GHz 0.00022 0.08217 0.07687 0.15925 1 Complies Note: The calculated distance is 20 cm. Output power including tune up tolerance. End of Test Report

Report No.: BTL-FCCP-2-2103H005 Page 1 of 105 FCC Radio Test Report FCC ID: KA2CS8635LHA1 This report concerns: Original Grant Project No. : 2103H005 Equipment : 2K QHD Pan & Zoom Outdoor Wi-Fi Camera Brand Name : D-Link Test Model : DCS-8635LH Series Model : N/A Applicant : D-Link Corporation Address : 14420 Myford Road Suite 100 Irvine California United States 92606 Manufacturer : D-Link Corporation Address : 14420 Myford Road Suite 100 Irvine California United States 92606 Date of Receipt : Mar. 09, 2021 Date of Test : Mar. 09, 2021~Apr. 15, 2021 Issued Date : May 19, 2021 Report Version : R01 Test Sample : Engineering Sample No.: SH2021030889 for radiation; SH2021030888 for conducted; SH2021030887-5 for adapter Standard(s) : FCC Part15, Subpart C (15.247) ANSI C63.10-2013 KDB 558074 D01 15.247 Meas Guidance v05r02 The above equipment has been tested and found compliance with the requirement of the relative standards by BTL Inc. Prepared by : Maker Qi Approved by : Issac Song Add: No. 29, Jintang Road, Tangzhen Industry Park, Pudong New Area, Shanghai 201210,China TEL: +86-021-61765666 Web: www.newbtl.com Report No.: BTL-FCCP-2-2103H005 Page 2 of 105 Declaration BTL represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with standards traceable to international standard(s) and/or national standard(s). BTL's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. BTL shall have no liability for any declarations, inferences or generalizations drawn by the client or others from BTL issued reports. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, A2LA, or any agency of the U.S. Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and ourselves, the test report shall not be reproduced, except in full, without our written approval. BTL’s laboratory quality assurance procedures are in compliance with the ISO/IEC 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. BTL is not responsible for the sampling stage, so the results only apply to the sample as received. The information, data and test plan are provided by manufacturer which may affect the validity of results, so it is manufacturer’s responsibility to ensure that the apparatus meets the essential requirements of applied standards and in all the possible configurations as representative of its intended use. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Please note that the measurement uncertainty is provided for informational purpose only and are not use in determining the Pass/Fail results. Report No.: BTL-FCCP-2-2103H005 Page 3 of 105 Table of Contents Page REPORT ISSUED HISTORY 6 1 . SUMMARY OF TEST RESULTS 7 1.1 TEST FACILITY 8 1.2 MEASUREMENT UNCERTAINTY 8 1.3 TEST ENVIRONMENT CONDITIONS 8 2 . GENERAL INFORMATION 9 2.1 GENERAL DESCRIPTION OF EUT 9 2.2 DESCRIPTION OF TEST MODES 11 2.3 PARAMETERS OF TEST SOFTWARE 13 2.4 DUTY CYCLE 14 2.5 BLOCK DIAGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 15 2.6 SUPPORT UNITS 15 3 . AC POWER LINE CONDUCTED EMISSIONS TEST 16 3.1 LIMIT 16 3.2 TEST PROCEDURE 16 3.3 DEVIATION FROM TEST STANDARD 16 3.4 TEST SETUP 17 3.5 EUT OPERATION CONDITIONS 17 3.6 TEST RESULTS 17 4 . RADIATED EMISSIONS TEST 18 4.1 LIMIT 18 4.2 TEST PROCEDURE 19 4.3 DEVIATION FROM TEST STANDARD 19 4.4 TEST SETUP 20 4.5 EUT OPERATION CONDITIONS 21 4.6 TEST RESULTS - 9 KHZ TO 30 MHZ 21 4.7 TEST RESULTS - 30 MHZ TO 1000 MHZ 21 4.8 TEST RESULTS - ABOVE 1000 MHZ 21 5 . BANDWIDTH TEST 22 5.1 LIMIT 22 5.2 TEST PROCEDURE 22 5.3 DEVIATION FROM STANDARD 22 5.4 TEST SETUP 22 Report No.: BTL-FCCP-2-2103H005 Page 4 of 105 Table of Contents Page 5.5 EUT OPERATION CONDITIONS 22 5.6 TEST RESULTS 22 6 . MAXIMUM OUTPUT POWER TEST 23 6.1 LIMIT 23 6.2 TEST PROCEDURE 23 6.3 DEVIATION FROM STANDARD 23 6.4 TEST SETUP 23 6.5 EUT OPERATION CONDITIONS 23 6.6 TEST RESULTS 23 7 . CONDUCTED SPURIOUS EMISSIONS 24 7.1 LIMIT 24 7.2 TEST PROCEDURE 24 7.3 DEVIATION FROM STANDARD 24 7.4 TEST SETUP 24 7.5 EUT OPERATION CONDITIONS 24 7.6 TEST RESULTS 24 8 . POWER SPECTRAL DENSITY TEST 25 8.1 LIMIT 25 8.2 TEST PROCEDURE 25 8.3 DEVIATION FROM STANDARD 25 8.4 TEST SETUP 25 8.5 EUT OPERATION CONDITIONS 25 8.6 TEST RESULTS 25 9 . MEASUREMENT INSTRUMENTS LIST 26 10 . EUT TEST PHOTO 28 APPENDIX A - AC POWER LINE CONDUCTED EMISSIONS 31 APPENDIX B - RADIATED EMISSION - 9 KHZ TO 30 MHZ 34 APPENDIX C - RADIATED EMISSION - 30 MHZ TO 1000 MHZ 35 APPENDIX D - RADIATED EMISSION- ABOVE 1000 MHZ 38 APPENDIX E - BANDWIDTH 87 APPENDIX F - MAXIMUM OUTPUT POWER 92 APPENDIX G - CONDUCTED SPURIOUS EMISSIONS 95 Report No.: BTL-FCCP-2-2103H005 Page 5 of 105 Table of Contents Page APPENDIX H - POWER SPECTRAL DENSITY 102 Report No.: BTL-FCCP-2-2103H005 Page 6 of 105 REPORT ISSUED HISTORY Report Version Description Issued Date R00 Original Issue. May 13, 2021 R01 Revised report to address TCB’s comments. May 19, 2021 Report No.: BTL-FCCP-2-2103H005 Page 7 of 105 1. SUMMARY OF TEST RESULTS Test procedures according to the technical standard(s): FCC Part15, Subpart C (15.247) Standard(s) Section Test Item Test Result Judgment Remark 15.207 AC Power Line Conducted Emissions APPENDIX A PASS ------ 15.247(d) 15.205(a) 15.209(a) Radiated Emissions APPENDIX B APPENDIX C APPENDIX D PASS ------ 15.247(a)(2) Bandwidth APPENDIX E PASS ------ 15.247(b)(3) Maximum Output Power APPENDIX F PASS ------ 15.247(d) Conducted Spurious Emissions APPENDIX G PASS ------ 15.247(e) Power Spectral Density A…

Text truncated - open the document above for the full version.

Report No.: BTL-FCCP-1-2103H005 Page 1 of 54 FCC Radio Test Report FCC ID: KA2CS8635LHA1 This report concerns: Original Grant Project No. : 2103H005 Equipment : 2K QHD Pan & Zoom Outdoor Wi-Fi Camera Brand Name : D-Link Test Model : DCS-8635LH Series Model : N/A Applicant : D-Link Corporation Address : 14420 Myford Road Suite 100 Irvine California United States 92606 Manufacturer : D-Link Corporation Address : 14420 Myford Road Suite 100 Irvine California United States 92606 Date of Receipt : Mar. 09, 2021 Date of Test : Mar. 09, 2021~Apr. 15, 2021 Issued Date : May 19, 2021 Report Version : R01 Test Sample : Engineering Sample No.: SH2021030889 for radiation; SH2021030888 for conducted; SH2021030887-5 for adapter Standard(s) : FCC Part15, Subpart C (15.247) ANSI C63.10-2013 KDB 558074 D01 15.247 Meas Guidance v05r02 The above equipment has been tested and found compliance with the requirement of the relative standards by BTL Inc. Prepared by : Maker Qi Approved by : Issac Song Add: No. 29, Jintang Road, Tangzhen Industry Park, Pudong New Area, Shanghai 201210,China TEL: +86-021-61765666 Web: www.newbtl.com Report No.: BTL-FCCP-1-2103H005 Page 2 of 54 Declaration BTL represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with standards traceable to international standard(s) and/or national standard(s). BTL’s reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. BTL shall have no liability for any declarations, inferences or generalizations drawn by the client or others from BTL issued reports. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, A2LA, or any agency of the U.S. Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and ourselves, the test report shall not be reproduced, except in full, without our written approval. BTL’s laboratory quality assurance procedures are in compliance with the ISO/IEC 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. BTL is not responsible for the sampling stage, so the results only apply to the sample as received. The information, data and test plan are provided by manufacturer which may affect the validity of results, so it is manufacturer’s responsibility to ensure that the apparatus meets the essential requirements of applied standards and in all the possible configurations as representative of its intended use. Limitation For the use of the authority’s logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Please note that the measurement uncertainty is provided for informational purpose only and are not use in determining the Pass/Fail results. Report No.: BTL-FCCP-1-2103H005 Page 3 of 54 Table of Contents Page REPORT ISSUED HISTORY 5 1 . SUMMARY OF TEST RESULTS 6 1.1 TEST FACILITY 7 1.2 MEASUREMENT UNCERTAINTY 7 1.3 TEST ENVIRONMENT CONDITIONS 7 2 . GENERAL INFORMATION 8 2.1 GENERAL DESCRIPTION OF EUT 8 2.2 DESCRIPTION OF TEST MODES 10 2.3 PARAMETERS OF TEST SOFTWARE 11 2.4 BLOCK DIAGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 11 2.5 SUPPORT UNITS 11 3 . AC POWER LINE CONDUCTED EMISSIONS TEST 12 3.1 LIMIT 12 3.2 TEST PROCEDURE 12 3.3 DEVIATION FROM TEST STANDARD 12 3.4 TEST SETUP 13 3.5 EUT OPERATING CONDITIONS 13 3.6 TEST RESULTS 13 4 . RADIATED EMISSION TEST 14 4.1 LIMIT 14 4.2 TEST PROCEDURE 15 4.3 DEVIATION FROM TEST STANDARD 15 4.4 TEST SETUP 16 4.5 EUT OPERATING CONDITIONS 17 4.6 TEST RESULT – 9 KHZ TO 30 MHZ 17 4.7 TEST RESULT – 30 MHZ TO 1000 MHZ 17 4.8 TEST RESULT – ABOVE 1000 MHZ 17 5 . BANDWIDTH TEST 18 5.1 LIMIT 18 5.2 TEST PROCEDURE 18 5.3 DEVIATION FROM STANDARD 18 5.4 TEST SETUP 18 5.5 EUT OPERATION CONDITIONS 18 Report No.: BTL-FCCP-1-2103H005 Page 4 of 54 Table of Contents Page 5.6 TEST RESULTS 18 6 . MAXIMUM OUTPUT POWER 19 6.1 LIMIT 19 6.2 TEST PROCEDURE 19 6.3 DEVIATION FROM STANDARD 19 6.4 TEST SETUP 19 6.5 EUT OPERATION CONDITIONS 19 6.6 TEST RESULTS 19 7 . CONDUCTED SPURIOUS EMISSION 20 7.1 LIMIT 20 7.2 TEST PROCEDURE 20 7.3 DEVIATION FROM STANDARD 20 7.4 TEST SETUP 20 7.5 EUT OPERATION CONDITIONS 20 7.6 TEST RESULTS 20 8 . POWER SPECTRAL DENSITY TEST 21 8.1 LIMIT 21 8.2 TEST PROCEDURE 21 8.3 DEVIATION FROM STANDARD 21 8.4 TEST SETUP 21 8.5 EUT OPERATION CONDITIONS 21 8.6 TEST RESULTS 21 9 . MEASUREMENT INSTRUMENTS LIST 22 10 . EUT TEST PHOTO 24 APPENDIX A – AC POWER LINE CONDUCTED EMISSIONS 27 APPENDIX B – RADIATED EMISSION – 9 KHZ TO 30 MHZ 30 APPENDIX C – RADIATED EMISSION – 30 MHZ TO 1000 MHZ 31 APPENDIX D – RADIATED EMISSION – ABOVE 1000 MHZ 34 APPENDIX E – BANDWIDTH 47 APPENDIX F – MAXIMUM OUTPUT POWER 49 APPENDIX G – CONDUCTED SPURIOUS EMISSION 51 APPENDIX H – POWER SPECTRAL DENSITY 53 Report No.: BTL-FCCP-1-2103H005 Page 5 of 54 REPORT ISSUED HISTORY Report Version Description Issued Date R00 Original Issue. May 13, 2021 R01 Revised report to address TCB’s comments. May 19, 2021 Report No.: BTL-FCCP-1-2103H005 Page 6 of 54 1. SUMMARY OF TEST RESULTS Test procedures according to the technical standard(s): FCC Part15, Subpart C (15.247) Standard(s) Section Test Item Test Result Judgment Remark 15.207 AC Power Line Conducted Emissions APPENDIX A PASS ------ 15.247(d) 15.205(a) 15.209(a) Radiated Emissions APPENDIX B APPENDIX C APPENDIX D PASS ------ 15.247(a)(2) Bandwidth APPENDIX E PASS ------ 15.247(b)(3) Maximum Output Power APPENDIX F PASS ------ 15.247(d) Conducted Spurious Emission APPENDIX G PASS ------ 15.247(e) Power Spectral Density APPENDIX H PASS ------ 15.203 Antenna Requirement ------ PASS ------ Note: (1) “N/A” denotes test is not a…

Text truncated - open the document above for the full version.

Report No.: BTL-FCCP-2-2103H005 Page 28 of 105 10. EUT TEST PHOTO Conducted Emissions Test Photos Report No.: BTL-FCCP-2-2103H005 Page 29 of 105 Radiated Emissions Test Photos 30 MHz to 1 GHz Report No.: BTL-FCCP-2-2103H005 Page 30 of 105 Radiated Emissions Test Photos Above 1 GHz