KA2E30A1AX3000 Wi-Fi 6 Range Extender

AX3000 Wi-Fi 6 Range Extender E30 User Manual Version 1.00 | 20/05/2023 iD-Link E30 User Manual D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes. Manual Revisions HardwareRevisionDateDescription A1v1.00 M arch 23, 2023First Release Trademarks D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other countries. All other company or product names mentioned herein are trademarks or registered trademarks of their respective companies. Apple®, Apple logo®, Safari®, iPhone®, and Macintosh® are trademarks of Apple Inc., registered in the U.S. and other countries. App Store SM is a service mark of Apple Inc. Chrome™ browser, Google Play™ and Android™ are trademarks of Google Inc. Internet Explorer®, Windows® and the Windows logo are trademarks of the Microsoft group of companies. Copyright © 2023 by D-Link Corporation. All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission from D-Link Corporation. Preface Power Usage ErP Power Usage This device is an Energy Related Product (ErP) with High Network Availability (HiNA), and automatically switches to a power-saving Network Standby mode within 1 minute of no packets being transmitted. If it is not needed during certain periods of time, it can be unplugged to save energy. Network Standby: 4.47 watts iiD-Link E30 User Manual Table of Contents Preface .................................................................................i Product Overview ..............................................................1 Package Contents .........................................................................1 System Requirements .................................................................2 Introduction ...................................................................................3 Features ....................................................................................3 What is a Wireless Extender? ............................................4 Hardware Overview .....................................................................5 Front ..........................................................................................5 Power/Status/WPS/Signal LED Indicator ......................6 Right Side ................................................................................7 Left Side.................................................................................... 8 Installation .........................................................................9 Wireless Installation Considerations ......................................9 Hardware Setup ..........................................................................10 Getting Started ................................................................11 WPS-PBC Configuration ...........................................................12 A ssessing Uplink Signal Strength .........................................13 AQUILA PRO AI Setup ........................................................14 Wireless Setup Wizard ...............................................................16 A ccess Point Mode Settings ....................................................22 Configuration ...................................................................23 Home ..............................................................................................23 Home - Connected to a Wi-Fi Mesh Router .......................26 Settings ..........................................................................................27 Extender Settings ...............................................................27 Existing Network ............................................................28 Smart Connect ................................................................29 Network Settings ................................................................32 D-Link Cloud .........................................................................34 Management ................................................................................35 Time .........................................................................................35 Admin .....................................................................................36 System ....................................................................................37 Upgrade .................................................................................38 Statistics .................................................................................39 Wi-Fi Mesh Setup .............................................................40 Setup Using the AQUILA PRO AI ...........................................41 Setup Using an Ethernet Cable .............................................42 Managing the Mesh Extender ...............................................43 Connecting Wireless Clients to the Extender ................46 WPS Button ...................................................................................46 Windows® 10 - WPA/WPA2/WPA3 .........................................47 Windows® 8 - WPA/WPA2 .........................................................48 Troubleshooting ..............................................................50 Wireless Basics .................................................................52 Tips ...................................................................................................53 Technical Specifications ..................................................54 GPL Code Statement........................................................ 55 Regulatory Statements ...................................................56 Table of Contents 1D-Link E30 User Manual Section 1 - Product Overview If any of the above items are missing, please contact your reseller. Qu…

Text truncated - open the document above for the full version.

This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Project No.: TM-2304000001P-1 Page: 1 / 13 Rev.: 00 APPENDIX 1 - PHOTOGRAPHS OF EUT EXTERNAL PHOTOGRAPHS OF EUT This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Project No.: TM-2304000001P-1 Page: 2 / 13 Rev.: 00 This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Project No.: TM-2304000001P-1 Page: 3 / 13 Rev.: 00 This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Project No.: TM-2304000001P-1 Page: 4 / 13 Rev.: 00 This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Project No.: TM-2304000001P-1 Page: 5 / 13 Rev.: 00 This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Project No.: TM-2304000001P-1 Page: 6 / 13 Rev.: 00 LAN Cable

DUS/DCAN FCC ID : KA2E30A1 IC:4216A-E30A1 M/N:E30A1 CAN ICES-3(B)/NMB-3(B) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Made in Taiwan Input:100-240VAC, 50-60Hz, 0.5A Max I.T .E. E520914 FCC ID : KA2E30A1 IC:4216A-E30A1 M/N:E30A1 CAN ICES-3(B)/NMB-3(B) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Made in Taiwan Input:100-240VAC, 50-60Hz, 0.5A Max I.T .E. E520914 P/N:XXXXXXXXX Wi-Fi Name(SSID):E30-WXYZ Password:XXXXXXXXXX http://WXYZ.devicesetup.net/ Device Password: XXXXXX MAC: XXXXXXXXXXXX E30 E30 49.3 31.4 43.5 16 49.3 31.4 43.5 16

This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Project No.: TM-2304000001P-1 Page: 7 / 13 Rev.: 00 INTERNAL PHOTOGRAPHS OF EUT This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Project No.: TM-2304000001P-1 Page: 8 / 13 Rev.: 00 This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Project No.: TM-2304000001P-1 Page: 9 / 13 Rev.: 00 This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Project No.: TM-2304000001P-1 Page: 10 / 13 Rev.: 00 RF IC RF Crystal This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Project No.: TM-2304000001P-1 Page: 11 / 13 Rev.: 00 Antenna (ANT2-5G) This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Project No.: TM-2304000001P-1 Page: 12 / 13 Rev.: 00 Antenna (ANT4-2/5G) This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Project No.: TM-2304000001P-1 Page: 13 / 13 Rev.: 00 Antenna (ANT3-2/5G)

Project No.: TM-2304000001P FCC ID: KA2E30A1 Page 1 / 20 Report No.: TMWK2306002069KS Rev.: 00 No.11, Wugong 6th Rd., Wugu Dist., New Taipei City , Taiwan /新北市五股區五工六路11號 t:(886-2) 2299-9720 f:(886-2) 2299-9721 www.sgs.com.tw Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of client’s instruction, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Compliance Certification Services Inc. 程智科技股份有限公司 Member of the SGS Group RF Exposure Evaluation Report FCC 47 CFR § 2.1091 for AX3000 Wi-Fi 6 Range Extender Model Name.: E30 Prepared for: D-Link Corporation 14420 Myford Road Suite 100 Irvine California United States 92606 Prepared by Compliance Certification Services Inc. Wugu Laboratory No.11, Wugong 6th Rd., Wugu Dist., New Taipei City, Taiwan. Issue Date: July 27, 2023 Note: This document may be altered or revised by Compliance Certification Services Inc. personnel only, and shall be noted in the revision section of the document. The client should not use it to claim product endorsement by TAF, NIST or any government agencies. The test results in the report only apply to the tested sample. This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Page 2 / 20 Report No.: TMWK2304001002KR Rev.: 00 Revision History Rev. Issue Date Revisions Effect Page Revised By 00 July 27, 2023 Initial Issue ALL Allison Chen This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Page 3 / 20 Report No.: TMWK2304001002KR Rev.: 00 Table of Contents 1 ATTESTATION OF TEST RESULTS ................................................................... 4 2 TEST SPECIFICATION, METHODS AND PROCEDURES ................................. 5 3 DEVICE UNDER TEST (DUT) INFORMATION .................................................... 6 3.1 DUT DESCRIPTION .............................................................................................................. 6 3.2 WIRELESS TECHNOLOGIES ............................................................................................... 7 4 MAXIMUM PERMISSIBLE EXPOSURE ............................................................ 12 4.1 LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) ............................................. 12 4.2 MPE CALCULATION METHOD ........................................................................................... 13 4.3 MPE EXEMPTION ............................................................................................................... 14 4.4 MULTIPLE RF SOURCES ................................................................................................... 15 5 RADIO FREQUENCY RADIATION MAX EXPOSURE EVALUATION .............. 16 6 SIMULTANEOUS TRANSMISSION EXEMPT ................................................... 19 6.1 SUM OF THE WIFI 2.4GHZ & WIFI 5GHZ .......................................................................... 19 7 FACILITIES ........................................................................................................ 20 This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Page 4 / 20 Report No.: TMWK2304001002KR Rev.: 00 1 Attestation of Test Results Applicant Name D-Link Corporation Model Name E30 Applicable Standards FCC 47 CFR § 2.1091 FCC 47 CFR § 1.1307 FCC 47 CFR § 1.1310 Published RF exposure KDB procedures Receive EUT Date: April 13, 2023 Compliance Certification Services Inc. , tested the above equipment in accordance with the requirements set forth in the above standards. Determination of compliance is based on the results of the compliance measurement,not taking into account measurement instrumentation uncertainy.All indications of Pass/Fail in this report are opinions expressed by Compliance Certification Services Inc, based on interpretations and/or observations of test results. The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. Approved & Released By: Sky Zhou Asst. Section Manager Compliance Certification Services Inc. This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Page 5 / 20 Report No.: TMWK2304001002KR Rev.: 00 2 Test Specification, Methods and Procedures The tests documented in this report were performed in accordance with FCC 47 CFR § 2.1091, the following FCC Published RF exposure KDB procedures: o 447498 D04 Interim General RF Exposure Guidance v01 o 865664 D02 RF Exposure Reporting v01r02 This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Page 6 / 20 Report No.: TMWK2304001002KR Rev.: 00 3 Device Under Test (DUT) Info…

Text truncated - open the document above for the full version.

Specification 1. Electrical Properties : With housing/With Cable loss(ANT2) 1.1 Frequency Range....................................... 1.2 Impedance .................................................. 1.3VSWR ....................................................... 1.4Return Loss..................................................... 1.5Radiation ................................................... 1.6Peak Gain.................................5.15~5.85GHz <6.0dBi 1.70.4 dB Max. 1.8Polarization.................................................Linear 1.9Cable................................................1.37 Coaxial Cable 1.10Connector....................................I-PEX MHF Connector 2. Physical Properties : 2.1Operating Temp. .............................................-10°C ~ +60°C 2.2Storage Temp. ...............................................-10°C ~ +70°C Cable Loss....................................................... RF Antenna Assembly Omni-directional 5.15~5.85 GHz 50Ω Nominal 1.92：1 Max. 20 dB Min. NE3-22046 E30 Antenna 2/5Gx2 2Gx15Gx1 Version: V 2.05 Released Date:2022/11/23 Prepared By: Leo Reviewed By: Cathy 1 2 Contents Revised History Conclusion & Comments Specification Antenna Placement & Solution Test Setup for S-parameter Measurement Return Loss Results Isolation Results Test Setup for Radiation Pattern Measurement 2D Radiation Pattern Results Results Summary (return loss, isolation, peak gain, efficiency ) 3 Revision History Released Date Version Record 2022/06/281.0Antenna simulation report 2022/07/132.0New Housing E30-3D-0708 2022/08/042.01 Antennas are designed in the 3D printed environment simulated 2022/08/192.02 變更線徑 2022/09/282.03A 實際主板驗證(有含5G ANT) 2022/10/262.04A An1-2G 更換成1.13 Low loss Cable 2022/11/232.05 ANT2 背膠改 1.0 泡棉貼在上殼 ANT1 移除 4 Specification RF Function Number of ANT Frequency BandRemark WiFi 5G15150 – 5850MHz WiFi 2-5 G22400 – 2500/5150 – 5850MHz Requirements of Antenna Design Requirements of Measurement Test ItemSpecificationRemark Return Loss10 dB Min Isolation> 15dB Peak gain>2/6dBi Efficiency> 65% Radiation pattern Scale: +10 ~ 40dBi, Angle step size: 15 degree 5 Antenna Placement & Solution ANT ANT Type Size (L * W * H) Cable Length (mm) Cable Type Connector 總長 外露 ANT2-5GDipole ANT18.0mm*9.0mm*0.6mm60mm55 Φ=1.37 (Normal) 灰 IPEX ANT3-2/5G Dipole ANT31.5mm*10.0mm*0.6mm60mm50 Φ=1.37 (Normal) 黑 IPEX ANT4-25GDipole ANT31.5mm*10.0mm*0.6mm60mm50 Φ=1.37 (Normal) 白 IPEX 6 Antenna Placement & Solution 7 Antenna Placement & Solution 8 Antenna Placement & Solution 9 ANT2(5150MHz – 5850MHz ) Return Loss Results 10 ANT3(2400MHz – 2500MHz/5150MHz – 5850MHz ) Return Loss Results 11 ANT4(2400MHz – 2500MHz/5150MHz – 5850MHz ) Return Loss Results 12 Isolation Results ANT2~ANT3(Criterion:>15 dB) 13 Isolation Results ANT2~ANT4(Criterion:>15 dB) 14 Isolation Results ANT3~ANT4(Criterion:>15 dB) 15 Test Setup for Radiation Pattern Measurement Chamber Information AUT X Y Z •SATIMO SG-24L Multi-Probe Antenna Measurement System •Angle between probes: 15 ° •Frequency range: 400 MHz – 8.5 GHz •Chamber Room Size: 5m L x 5m W x 5m H Y Z X Left Front Down Right(+X) Up(+Z) Back(+Y) 16 2D Radiation Pattern Results X Z Y X Y Z ANT2 – 5G Y Z X Z Y X 17 2D Radiation Pattern Results X Z Y X Y Z ANT3 – 2G Y Z X Z Y X 18 2D Radiation Pattern Results X Z Y X Y Z ANT3 – 5G Y Z X Z Y X 19 2D Radiation Pattern Results X Z Y X Y Z ANT4 – 2G Y Z X Z Y X 20 2D Radiation Pattern Results X Z Y X Y Z ANT4 – 5G Y Z X Z Y X 21 Results Summary Return Loss Frequency (MHz) ANT2ANT3ANT4 2400 MHz-1610 2450 MHz -1811 2500 MHz -1312 5150 MHz 151312 5350 MHz 211020 5725 MHz 201012 5850 MHz 201212 22 Results Summary Isolation Ant2 to Ant3 Ant2 to Ant4 Ant3 to Ant4 2400 MHz 354131 2450 MHz 353629 2500 MHz 323623 5150MHz233334 5350 MHz 222543 5725 MHz202535 5850 MHz 202535 23 Results Summary Peak gain & Efficiency – Ant2 – 5G Frequency (MHz)Peak Gain (dBi) Efficiency (%) 5150 MHz 6.08 75.74 5350 MHz 6.0776.23 5725 MHz 5.80 76.50 5850 MHz 5.39 75.88 24 Results Summary Peak gain & Efficiency – Ant3 – 2/5G Frequency (MHz)Peak Gain (dBi) Efficiency (%) 2400 MHz 2.7868.92 2450 MHz 2.7768.97 2500 MHz 2.6667.96 5150 MHz 5.3468.42 5350 MHz 5.2167.29 5725 MHz 4.4968.53 5850 MHz 5.4466.04 25 Results Summary Peak gain & Efficiency – Ant4 – 2/5G Frequency (MHz)Peak Gain (dBi) Efficiency (%) 2400 MHz 2.6066.58 2450 MHz 3.1868.46 2500 MHz 2.8767.26 5150 MHz 3.2565.73 5350 MHz 3.7366.99 5725 MHz 3.7067.77 5850 MHz 3.7366.55

Specification 1. Electrical Properties : With housing/With Cable loss(ANT3) 1.1 Frequency Range....................................... 1.2 Impedance .................................................. 1.3VSWR ....................................................... 1.4Return Loss..................................................... 1.5Radiation ................................................... 1.6Peak Gain.................................2.4~2.5GHz <2.7dBi 5.15~5.85GHz <5.4dBi 1.70.27 dB Max. 1.8 Polarization.................................................Linear 1.9 Cable................................................1.37 Coaxial Cable 1.10Connector....................................I-PEX MHF Connector 2. Physical Properties : 2.1Operating Temp. .............................................-10°C ~ +60°C 2.2Storage Temp. ...............................................-10°C ~ +70°C Cable Loss....................................................... RF Antenna Assembly Omni-directional 2.4~2.5GHz / 5.15~5.85 GHz 50Ω Nominal 1.92：1 Max. 18 dB Min. NE3-22046 E30 Antenna 2/5Gx2 2Gx15Gx1 Version: V 2.05 Released Date:2022/11/23 Prepared By: Leo Reviewed By: Cathy 1 2 Contents Revised History Conclusion & Comments Specification Antenna Placement & Solution Test Setup for S-parameter Measurement Return Loss Results Isolation Results Test Setup for Radiation Pattern Measurement 2D Radiation Pattern Results Results Summary (return loss, isolation, peak gain, efficiency ) 3 Revision History Released Date Version Record 2022/06/281.0Antenna simulation report 2022/07/132.0New Housing E30-3D-0708 2022/08/042.01 Antennas are designed in the 3D printed environment simulated 2022/08/192.02 變更線徑 2022/09/282.03A 實際主板驗證(有含5G ANT) 2022/10/262.04A An1-2G 更換成1.13 Low loss Cable 2022/11/232.05 ANT2 背膠改 1.0 泡棉貼在上殼 ANT1 移除 4 Specification RF Function Number of ANT Frequency BandRemark WiFi 5G15150 – 5850MHz WiFi 2-5 G22400 – 2500/5150 – 5850MHz Requirements of Antenna Design Requirements of Measurement Test ItemSpecificationRemark Return Loss10 dB Min Isolation> 15dB Peak gain>2/6dBi Efficiency> 65% Radiation pattern Scale: +10 ~ 40dBi, Angle step size: 15 degree 5 Antenna Placement & Solution ANT ANT Type Size (L * W * H) Cable Length (mm) Cable Type Connector 總長 外露 ANT2-5GDipole ANT18.0mm*9.0mm*0.6mm60mm55 Φ=1.37 (Normal) 灰 IPEX ANT3-2/5G Dipole ANT31.5mm*10.0mm*0.6mm60mm50 Φ=1.37 (Normal) 黑 IPEX ANT4-25GDipole ANT31.5mm*10.0mm*0.6mm60mm50 Φ=1.37 (Normal) 白 IPEX 6 Antenna Placement & Solution 7 Antenna Placement & Solution 8 Antenna Placement & Solution 9 ANT2(5150MHz – 5850MHz ) Return Loss Results 10 ANT3(2400MHz – 2500MHz/5150MHz – 5850MHz ) Return Loss Results 11 ANT4(2400MHz – 2500MHz/5150MHz – 5850MHz ) Return Loss Results 12 Isolation Results ANT2~ANT3(Criterion:>15 dB) 13 Isolation Results ANT2~ANT4(Criterion:>15 dB) 14 Isolation Results ANT3~ANT4(Criterion:>15 dB) 15 Test Setup for Radiation Pattern Measurement Chamber Information AUT X Y Z •SATIMO SG-24L Multi-Probe Antenna Measurement System •Angle between probes: 15 ° •Frequency range: 400 MHz – 8.5 GHz •Chamber Room Size: 5m L x 5m W x 5m H Y Z X Left Front Down Right(+X) Up(+Z) Back(+Y) 16 2D Radiation Pattern Results X Z Y X Y Z ANT2 – 5G Y Z X Z Y X 17 2D Radiation Pattern Results X Z Y X Y Z ANT3 – 2G Y Z X Z Y X 18 2D Radiation Pattern Results X Z Y X Y Z ANT3 – 5G Y Z X Z Y X 19 2D Radiation Pattern Results X Z Y X Y Z ANT4 – 2G Y Z X Z Y X 20 2D Radiation Pattern Results X Z Y X Y Z ANT4 – 5G Y Z X Z Y X 21 Results Summary Return Loss Frequency (MHz) ANT2ANT3ANT4 2400 MHz-1610 2450 MHz -1811 2500 MHz -1312 5150 MHz 151312 5350 MHz 211020 5725 MHz 201012 5850 MHz 201212 22 Results Summary Isolation Ant2 to Ant3 Ant2 to Ant4 Ant3 to Ant4 2400 MHz 354131 2450 MHz 353629 2500 MHz 323623 5150MHz233334 5350 MHz 222543 5725 MHz202535 5850 MHz 202535 23 Results Summary Peak gain & Efficiency – Ant2 – 5G Frequency (MHz)Peak Gain (dBi) Efficiency (%) 5150 MHz 6.08 75.74 5350 MHz 6.0776.23 5725 MHz 5.80 76.50 5850 MHz 5.39 75.88 24 Results Summary Peak gain & Efficiency – Ant3 – 2/5G Frequency (MHz)Peak Gain (dBi) Efficiency (%) 2400 MHz 2.7868.92 2450 MHz 2.7768.97 2500 MHz 2.6667.96 5150 MHz 5.3468.42 5350 MHz 5.2167.29 5725 MHz 4.4968.53 5850 MHz 5.4466.04 25 Results Summary Peak gain & Efficiency – Ant4 – 2/5G Frequency (MHz)Peak Gain (dBi) Efficiency (%) 2400 MHz 2.6066.58 2450 MHz 3.1868.46 2500 MHz 2.8767.26 5150 MHz 3.2565.73 5350 MHz 3.7366.99 5725 MHz 3.7067.77 5850 MHz 3.7366.55

Project No.: TM-2304000001P FCC ID: KA2E30A1 Page: 1 / 922 Report No.: TMWK2304001001KR Rev.: 00 No.11, Wugong 6th Rd., Wugu Dist., New Taipei City , Taiwan /新北市五股區五工六路11號 t:(886-2) 2299-9720 f:(886-2) 2299-9721 www.sgs.com.tw Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of client’s instruction, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Compliance Certification Services Inc. 程智科技股份有限公司 Member of the SGS Group RADIO TEST REPORT FCC 47 CFR PART 15 SUBPART E Test Standard FCC Part 15.407 Product name AX3000 Wi-Fi 6 Range Extender Brand Name D-Link Model No. E30 Test Result Pass Statements of Conformity Determination of compliance is based on the results of the compliance measurement, not taking into account measurement instrumentation uncertainty. The test Result was tested by Compliance Certification Services Inc. The test data, data evaluation, test procedures, and equipment configurations shown in this report were given in ANSI C63.10: 2013 and compliance standards. The test results of this report relate only to the tested sample (EUT) identified in this report. The test Report of full or partial shall not copy. Without written approval of Compliance Certification Services Inc.(Wugu Laboratory) Approved by: Sehni Hu Supervisor This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Page: 2 / 922 Report No.: TMWK2304001001KR Rev.: 00 Revision History Rev. Issue Date Revisions Effect Page Revised By 00 July 27, 2023 Initial Issue ALL Allison Chen This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Page: 3 / 922 Report No.: TMWK2304001001KR Rev.: 00 Table of contents 1. GENERAL INFORMATION ............................................................................................... 4 1.1 EUT INFORMATION ......................................................................................................... 4 1.2 EUT CHANNEL INFORMATION ....................................................................................... 5 1.3 ANTENNA INFORMATION ............................................................................................... 7 1.4 MEASUREMENT UNCERTAINTY .................................................................................... 8 1.5 FACILITIES AND TEST LOCATION................................................................................. 9 1.6 INSTRUMENT CALIBRATION ......................................................................................... 9 1.7 SUPPORT AND EUT ACCESSORIES EQUIPMENT ..................................................... 13 1.8 TEST METHODOLOGY AND APPLIED STANDARDS .................................................. 13 2. TEST SUMMARY............................................................................................................ 14 3. DESCRIPTION OF TEST MODES .................................................................................. 16 3.1 THE EUT CHANNEL NUMBER OF OPERATING CONDITION ..................................... 16 3.2 THE WORST MODE OF MEASUREMENT..................................................................... 18 3.3 EUT DUTY CYCLE ......................................................................................................... 19 4. TEST RESULT ................................................................................................................ 22 4.1 AC POWER LINE CONDUCTED EMISSION .................................................................. 22 4.2 26DB BANDWIDTH, 6DB BANDWIDTH AND OCCUPIED BANDWIDTH(99%) ............ 25 4.3 OUTPUT POWER MEASUREMENT ............................................................................ 179 4.4 POWER SPECTRAL DENSITY .................................................................................... 196 4.5 RADIATION BANDEDGE AND SPURIOUS EMISSION ............................................... 340 5. DYNAMIC FREQUENCY SELECTION FOR MASTER ................................................. 860 5.1 DFS DETECTION THRESHOLDS ................................................................................ 861 5.2 DFS RESPONSE REQUIREMENT ............................................................................... 861 5.3 RADAR TEST WAVEFORMS ....................................................................................... 862 5.4 CA…

Text truncated - open the document above for the full version.