KA2IR803B1Wireless AC750 Dual Band Router/Wireless AC750 Dual Band Easy Router

QUICK INSTALLATION GUIDE WIRELESS AC 750 DUAL-BAND EASY ROUTER GO-RT-AC750 INSTALLATIONSANLEITUNG GUIDE D’INSTALLATION GUÍA DE INSTALACIÓN GUIDA DI INSTALLAZIONE INSTRUKCJA INSTALACJI INSTALAČNÍ PŘÍRUČKA TELEPÍTÉSI SEGÉDLET GO-RT-AC750 2 ENGLISH IMPORTANT INFORMATION IMPORTANT INFORMATION REGARDING YOUR INTERNET SUBSCRIPTION USERS WHO SUBSCRIBE TO LIMITED OR “PAY AS YOU USE” BROADBAND INTERNET ACCESS. In the WAN configuration settings, there is a parameter called Maximum idle timer. This parameter controls how many seconds of inactivity before dropping connection to the Internet. The default setting is “0” which disables this functionality and the Internet will be connected all the time. We suggest that you should change the Maximum idle timer to “300” (5 minutes) so that the device will drop the line after 5 minutes of inactivity and keep usage costs down. USERS WHO SUBSCRIBE TO UNLIMITED BROADBAND INTERNET ACCESS. You can just leave this parameter unchanged or enable Auto-reconnect to be always online. TECHNICAL NOTES: The Maximum idle timer is only relevant if your ISP is using PPPoE connection. EN INFORMATION IMPORTANTE CONCERNANT VOTRE ABONNEMENT INTERNET AUX UTILISATEURS QUI ONT SOUSCRIT UN ABONNEMENT LIMITÉ OU AVEC PAIEMENT UNIQUEMENT À L’UTILISATION . Au niveau du paramétrage de la configuration WAN, un paramètre est appelé Maximum idle timer. Ce paramètre contrôle le nombre de secondes d’inactivité avant la coupure de la connexion à Internet.. Le paramètre par défaut est à “0”, ce qui dévalide cette fonctionnalité et vous connecte à internet tout le temps. Nous vous conseillons de changer le Maximum idle timer à “300” (5 minutes) de sorte que la ligne soit coupée après 5 minutes d’inactivité pour limiter les coûts. AUX UTILISATEURS QUI ONT SOUSCRIT UN ABONNEMENT INTERNET ILLIMITÉ. Vous pouvez laisser ce paramètre à 0 ou valider l’Auto-reconnexion pour toujours être en ligne. NOTE TECHNIQUE : Le Maximum idle timer est utile uniquement si votre FAI utilise une connexion PPPoE. FR INFORMAZIONE IMPORTANTE RIGUARDANTE LA REGISTRAZIONE IN INTERNET PER GLI UTENTI CHE SOTTOSCRIVONO UN ABBONAMENTO INTERNET BROADBAND LIMITATO O A “PAGAMENTO PER IL TRAFFICO DATI EFFETTUATO” Nelle impostazioni della configurazione WAN, c’è un parametro chiamato Maximum idle timer. Questo parametro controlla i secondi di inattività prima di chiudere la connessione ad Internet. L’impostazione di default è “0” che disabilita questa funzione cosicché la connessione ad Internet è sempre attiva in ogni momento. Suggeriamo di cambiare il parametro di Maximum idle timer a “300” (5 minuti) cosicché il dispositivo fermerà la connessione dopo 5 minuti di inattività. In questo modo il costo della telefonate sarà ridotto. PER GLI UTENTI CHE SOTTOSCRIVONO UN ABBONAMENTO INTERNET BROADBAND ILLIMITATO. E’ possibile lasciare questo parametro invariato o abilitare la funzione di auto-connessione per rimanere sempre connessi NOTA TECNICA : Il parametro Maximum idle timer è rilevante solo se l’ISP utilizza una connessione PPPoE IT ! GO-RT-AC750 3 ENGLISH INFORMACIÓN IMPORTANTE ACERCA DE LA SUBSCRIPCIÓN A INTERNET LOS USUARIOS SUSCRITOS, EN LOS PARÁMETROS DE CONFIGURACIÓN WAN, A UN ACCESO A INTERNET DE BANDA ANCHA LIMITADO O DE “PAGO POR USO”. Encontrarán un parámetro llamado Maximum idle timer. Este parámetro controla cuántos segundos de inactividad se permiten antes de que se interrumpa la conexión a Internet. El valor por defecto es “0”, y desactiva esta funcionalidad, con lo que se estará conectado ininterrumpidamente a Internet. Se recomienda que se modifique el valor de Maximum idle timer a “300” (5 minutos); así el dispositivo cortará la línea tras 5 minutos de inactividad y se reducirán los costes por uso. LOS USUARIOS SUSCRITOS A UN ACCESO A INTERNET DE BANDA ANCHA ILIMITADO. Pueden dejar este parámetro como se encuentra o bien activar Auto-reconnect para estar siempre conectados. NOTAS TÉCNICAS: Maximum idle timer sólo es relevante si el ISP usa una conexión PPPoE. WICHTIGE HINWEISE ZUR INTERNET-VERBINDUNG DE ES Beachten Sie bitte, dass bei dem Einsatz eines Routers (oder Modem in Betriebsart "PPPoE") hohe Verbindungskosten entstehen können. Sie müssen die Einstellungen des Routers Ihrem Tarif und Ihren Surfgewohnheiten anpassen, um zusätzliche Kosten zu vermeiden. Insbesondere dann, wenn sie einen Tarif nutzen, bei dem Ihnen die Kosten auf der Basis Ihrer Online-Zeit in Rechnung gestellt werden (zeitbasierend), müssen Sie Ihren Router durch korrekte Einstellung dazu veranlassen, die Verbindung bei Inaktivität zu trennen. Bei Nutzung eines Tarifs der auf einem festgelegten Volumen (übertragene Datenmenge) beruht, sollten Sie entsprechende Einstellungen verwenden. Auch bei der Nutzung einer Flatrate (Volumen und Zeit unabhängiger Tarif) ist die richtige Wahl der Routereinstellung vorzunehmen. Nach Durchführung der Einstellungen sollten Sie sich vergewissern, dass Ihre Einstellungen vom Gerät übernommen worden sind. Am besten können Sie dies prüfen, indem Sie das Gerät kurz von der Versorgungsspannung trennen und dann das Konfigurationsmenü erneut aufrufen. Im Weiteren werden die Einstellungen erläutert, die Sie aktivieren müssen um das entsprechende Verhalten des Gerätes auszulösen. "ALWAYS-ON" - "MANUAL" - "CONNECT-On-DEMAND" "IMMER AN "- "MANUELL" - "AUF ANFRAGE" Diese Funktionen steuern das Online-Verhalten der Produkte: DI (DIR)- Produkte: (siehe auch Hinweis —» Maximum Idle Time) Always-On : Router bleibt ständig mit dem Internet verbunden Manual: Sie müssen im Menu Status des Routers die Verbindung manuell aktivieren Connect on Demand: Bei einer Verbindungsanfrage aus Ihrem LAN baut der Router die Verbindung zum Internet automatisch auf. DSL - Produkte: (siehe auch Hinweis —> Maximum Idle Time) Connect on Demand: Bei einer Verbindungsanfrage aus Ihrem LAN baut der Router die Verbindung zum Internet automatisch auf. Wird dieser Funktion nicht aktiviert, dann bleibt das Gerat ständig mit dem Internet verbunden. "MA…

Text truncated - open the document above for the full version.

Version 1.0 | 8/21/2014 Wireless AC750 Dual Band Router User Manual DIR-803 iD-Link DIR-803 User Manual D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes. Manual Revisions Trademarks D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other countries. All other company or product names mentioned herein are trademarks or registered trademarks of their respective companies. Copyright © 2014 by D-Link Systems, Inc. All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission from D-Link Systems, Inc. RevisionDateDescription 1.0November 11, 2013• Initial release for Revision A1 Preface iiD-Link DIR-803 User Manual Table of Contents Preface .................................................................................i Manual Revisions ...........................................................................i Trademarks ......................................................................................i Product Overview ..............................................................1 Package Contents .........................................................................1 System Requirements .................................................................2 Introduction ...................................................................................3 Features ............................................................................................4 Hardware Overview .....................................................................5 Connections ...........................................................................5 LEDs ...........................................................................................6 Installation .........................................................................7 Before you Begin ...........................................................................7 Wireless Installation Considerations ......................................8 Manual Setup .................................................................................9 Configuration ...................................................................11 Quick Setup Wizard ....................................................................12 QRS Mobile App ..........................................................................17 Web-based Configuration Utility ..........................................22 Internet Connection Setup .............................................23 Internet Connection Setup Wizard ...............................24 Internet (Manual) ................................................................30 Static (assigned by ISP) ................................................32 PPPoE (DSL) ......................................................................33 PPTP ....................................................................................35 L2TP ....................................................................................37 DS-Lite ...............................................................................39 Wireless connection setup wizard ................................40 Wi-Fi Protected Setup Wizard .........................................43 Manual wireless network setup .....................................44 Wireless Security .................................................................53 What is WPA? ...................................................................53 Network Settings ................................................................54 Router Settings ...............................................................54 DHCP Server Settings ...................................................55 DHCP Reservation .........................................................57 IPv6 ..........................................................................................58 IPv6 Internet Connection Setup Wizard ................59 IPv6 Manual Setup.........................................................64 Advanced ...............................................................................73 Virtual Server ...................................................................73 Port Forwarding .............................................................74 Application Rules ...........................................................75 QoS Engine .......................................................................76 Net work Filters ................................................................78 Access Control .................................................................79 Website Filters .................................................................82 Inbound Filters ................................................................83 Firewall Settings .............................................................84 Routing ..............................................................................86 Table of Contents iiiD-Link DIR-803 User Manual Table of Contents Advanced Wireless ........................................................87 Wi-Fi Protected Setup (WPS) .....................................88 Advanced Network Settings ......................................90 Guest Zone .......................................................................91 Tools ........................................................................................92 Admin.................................................................................92 Time ....................................................................................93 SysLog ................................................................................94 Email Settings..................................................................95 System ................................…

Text truncated - open the document above for the full version.

CERTIFICATE OF COMPLIANCE Authorized under Declaration of Conformity according to 47 CFR, Part 2 and Part 15 of the FCC Rules. The product listed in follows was (were) tested in the BTL EMC Laboratory to comply with the criteria limits Class B of conducted and radiated emissions of the Technical Standards FCC Part 15, Subpart B, established by the FCC, USA. Equipment 1) Wireless AC750 Dual Band Router 2) Wireless AC750 Dual Band Easy Router Model Name 1) DIR-803 2) GO-RT-AC750 Brand Name D-Link Applicant D-Link Corporation Address No.289, Sinhu 3rd Rd., Neihu District, Taipei City 114, Taiwan, R.O.C. Standard(s) FCC Part 15, Subpart B: 2013 ANSI C63.4-2009 ICES-003 Issue 5: 2012 Report(s) BTL-FCCE-1-1408C111 The test data, data evaluation, and equipment configuration contained in our test report(s) above was(were) obtained utilizing the test procedures, test instruments, test sites that has been accredited by the Authority of TAF according to the ISO-17025 quality assessment standard and technical standard(s). The test data contained in the referenced test report relate only to the EUT sample and item(s) tested. Andy Chiu Authorized Signatory BTL INC. B1, No. 37, Lane 365, Yang-Guang St., Nei-Hu District, Taipei City 114, Taiwan. TEL:+886-2-2657-3299 FAX:+886-2-2657-3331

Report No.: BTL-FCCP-2-1408C111 11. EUT PHOTO Page 144 of 147 Report No.: BTL-FCCP-2-1408C111 Page 145 of 147 Report No.: BTL-FCCP-2-1408C111 Page 146 of 147 Report No.: BTL-FCCP-2-1408C111 Page 147 of 147

Colors: Background Texts and logos Date: 2014/7/1 Date: 2014/7/1 Date: 2014/7/1 Title: DIR-803 Device Label Material: 50μ白特多(PET) Glossy White Polyester Film Modified drawing Drawn by: Joan Huang Checked by: Lush Lin Approved by: Lush Lin Coated: 25μ霧面特多(PET) Matte Clear Polyester Film Unit: mm Cutting and Printing Tolerance: ±0.15mm Contents Tolerance: ±0.25mm Adhesive: 克力 Acrylic Scale: 1:1 Part No.: 9700000431DLG Task ID: 4444 Original drawing 尺寸圖 outline dimension 刷 for printing Rev.: 8.6mm 6mm 6mm 5.2mm White Black ODEHOORFDWLRQ

Project No.: 1408C111 Page 2 of 6 Project No.: 1408C111 Page 3 of 6 Project No.: 1408C111 Page 4 of 6 Project No.: 1408C111 Page 5 of 6 Project No.: 1408C111 Page 6 of 6

FCC RF EXPOSURE REPORT FCC ID:KA2IR803B1 Project No. : 1408C111 Equipment : 1) Wireless AC750 Dual Band Router 2) Wireless AC750 Dual Band Easy Router Model : DIR-803;GO-RT-AC750 Applicant : D-LINK Corporation Address : No.289, Sinhu 3rd Rd., Neihu District, Taipei City 114, Taiwan, R.O.C. According: : FCC Guidelines for Human Exposure IEEE C95.1 BTL INC. No.3, Jinshagang 1st Road, Shixia, Dalang Town, Dongguan, China. TEL: +86-769-8318-3000 FAX: +86-769-8319-6000 MPE CALCULATION METHOD: Calculation Method of RF Safety Distance: where: S = power density P = power input to the antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna Table for Filed Antenna Ant. Manufacturer Model Name Antenna Type Connector Gain(dBi) 1 Nienyi Industial Corp. N/A Dipole N/A 4.1 TEST RESULTS EUT： Wireless AC750 Dual Band Router Model Name : DIR-803 Temperature： 25 °C Relative Humidity: 55 % Test Voltage : AC 120V/60Hz Test Mode ： TX A Mode Antenna Gain (dBi) Antenna Gain (numeric) Peak Output Power (dBm) Peak Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Te s t Result 4.1 2.5704 21.55 142.8894 0.073105551 Complies 4.1 2.5704 22.32 170.6082 0.087287161 Complies 4.1 2.5704 23.14 206.0630 0.105426641 Complies EUT： Wireless AC750 Dual Band Router Model Name : DIR-803 Temperature： 25 °C Relative Humidity: 55 % Test Voltage : AC 120V/60Hz Test Mode ： TX N20 Mode Antenna Gain (dBi) Antenna Gain (numeric) Peak Output Power (dBm) Peak Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Te s t Result 4.1 2.5704 22.12 162.9296 0.083358591 Complies 4.1 2.5704 22.3 169.8244 0.086886111 Complies 4.1 2.5704 22.64 183.6538 0.093961591 Complies EUT： Wireless AC750 Dual Band Router Model Name : DIR-803 Temperature: 25 °C Relative Humidity: 55 % Test Voltage : AC 120V/60Hz Test Mode : TX N40 Mode Antenna Gain (dBi) Antenna Gain (numeric) Peak Output Power (dBm) Peak Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Te s t Result 4.1 2.5704 22.32 170.6082 0.087287161 Complies 4.1 2.5704 23.41 219.2805 0.112189021 Complies Note: the calculated distance is 20 cm.

Report No. : N : BTL-FCCP- This rep Project Equip m Model N Applica Addres Date of Date of Issued D Tested b Testing Techni c Author i B No.3,Jins TEL -2-1408C111 FCC F ort concer No. ment Name ant s Receipt Test Date by g Engineer cal Manage ized Signat BT shagang L: +86-76 1 C Rad FCC ID rns (check : 1408C1 1 : 1) Wirel e 2) Wirele : 1) DIR- 8 2) GO-R : D-Link C : No.289, 114, Tai w : Aug. 13, : Aug. 13, : Sep. 01 , : BTL Inc . er tory TL g 1st Roa Gua 69-8318- dio Te D:KA2 one): O 11 ess AC750 ess AC750 803 RT-AC750 Corporation Sinhu 3rd R wan, R.O.C , 2014 , 2014 ~ Au , 2014 . : : : L I ad, Shixi ngdong, -3000FA est Re IR803 Original Gra Dual Band Dual Band Rd., Neihu C. g. 29, 201 4 (Dav (Leo (Ste IN a,Dalang China. AX: +86-7 eport B1 ant Clas Router Easy Rout e District, Tai 4 vid Mao) o Hung) ven Lu) NC g To w n , 769-8319 Pa t ss II Chang er pei City . Donggua 9-6000 ge 1 of 147 ge an, Report No.: BTL-FCCP-2-1408C111 Declaration BTL represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with the standards traceable to National Measurement Laboratory (NML) of R.O.C., or National Institute of Standards and Technology ( BTL's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with th mechanical components. BTL shall have no liability for any declarations, inferences or generalizations drawn by the client or others from BTL BTL ’s reports must not be used by the client to claim product endorse agency of the Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and BTL-self, extracts from the test report shall not be reproduced except in full with approval. BTL’s laboratory quality assurance procedures are in compliance with the and accredited by the conformity assessment authorities listed in this test report. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with the standards traceable to National Measurement National Institute of Standards and Technology (NIST) of 's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and shall have no liability for any declarations, inferences or generalizations BTL issued reports. ’s reports must not be used by the client to claim product endorsement by the authorities or any This report is the confidential property of the client. As a mutual protection to the clients, the public and , extracts from the test report shall not be reproduced except in full with BTL’s authorized written ’s laboratory quality assurance procedures are in compliance with the ISO Guide 17025 and accredited by the conformity assessment authorities listed in this test report. authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Page 2 of 147 represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with the standards traceable to National Measurement ) of U.S.A. 's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility e identical electrical and shall have no liability for any declarations, inferences or generalizations ment by the authorities or any This report is the confidential property of the client. As a mutual protection to the clients, the public and ’s authorized written 17025 requirements, authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Report No.: BTL-FCCP-2-1408C111 Table of Contents 1 . CERTIFICATION 2 . SUMMARY OF TEST RESULTS 2.1 TEST FACILITY 2.2 MEASUREMENT UNCERTAINTY 3 . GENERAL INFORMATION 3.1 GENERAL DESCRIPTION OF EUT 3.2 DESCRIPTION OF TEST M 3.3 TABLE OF PARAMETERS 3.4 BLOCK DIAGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 3.5 DESCRIPTION OF SUPPORT UNITS 4 . EMC EMISSION TEST 4.1 CONDUCTED EMISSION MEASUREMENT 4.1.1 POWER LINE CONDUCTED EMISSION 4.1.2 TEST PROCEDURE 4.1.3 DEVIATION FROM TEST STANDARD 4.1.4 TEST SETUP 4.1.5 EUT OPERATING CONDITIONS 4.1.6 EUT TEST CONDITIONS 4.1.7 TEST RESULTS 4.2 RADIATED EMISSION MEASUREMENT 4.2.1 RADIATED EMISSION LI 4.2.2 TEST PROCEDURE 4.2.3 DEVIATION FROM TEST STANDARD 4.2.4 TEST SETUP 4.2.5 EUT OPERATING CONDITIONS 4.2.6 EUT TEST CONDITIONS 4.2.7 TEST RESULTS (9K 4.2.8 TEST RESULTS (BETWEEN 4.2.9 TEST RESULTS (ABOVE 5 . 26dB SPECTRUM BANDWIDTH 5.1 APPLIED PROCEDURES / 5.1.1 TEST PROCEDURE 5.1.2 DEVIATION FROM STANDARD 5.1.3 TEST SETUP 5.1.4 EUT OPERATION CONDITIONS 5.1.5 EUT TEST CONDITIONS 5.1.6 TEST RESULTS 6 . MAXIMUM CONDUCTED OU Table of Contents . SUMMARY OF TEST RESULTS 2.2 MEASUREMENT UNCERTAINTY 3.1 GENERAL DESCRIPTION OF EUT 2 DESCRIPTION OF TEST MODES TABLE OF PARAMETERS OF TEXT SOFTWARE SETTING BLOCK DIAGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED DESCRIPTION OF SUPPORT UNITS 4.1 CONDUCTED EMISSION MEASUREMENT 4.1.1 POWER LINE CONDUCTED EMISSION 4.1.3 DEVIATION FROM TEST STANDARD ONDITIONS 4.1.6 EUT TEST CONDITIONS 4.2 RADIATED EMISSION MEASUREMENT RADIATED EMISSION LIMITS ION FROM TEST STANDARD 4.2.5 EUT OPERATING CONDITIONS 4.2.6 EUT TEST CONDITIONS TO 30MHz) ETWEEN 30 TO 1000 MHz) BOVE 1000 MHz) SPECTRUM BANDWIDTH APPLIED PROCEDURES / LIMIT 5.1.2 D…

Text truncated - open the document above for the full version.

Report No.: BTL-FCCP-2-1408C111 Orthogonal Axis : X Test Mode : TX N40 Mode 5190MHz TX N40 Mode 5190MHz Horizontal Page 74 of 147 Report No.: BTL-FCCP-2-1408C111 Orthogonal Axis : X Test Mode : TX N40 Mode 5230MHz TX N40 Mode 5230MHz Vertical Page 75 of 147 Report No.: BTL-FCCP-2-1408C111 Orthogonal Axis : X Test Mode : TX N40 Mode 5230MHz N40 Mode 5230MHz Vertical Page 76 of 147 Report No.: BTL-FCCP-2-1408C111 Orthogonal Axis : X Test Mode : TX N40 Mode 5230MHz N40 Mode 5230MHz Horizontal Page 77 of 147 Report No.: BTL-FCCP-2-1408C111 Orthogonal Axis : X Test Mode : TX N40 Mode 5230MHz N40 Mode 5230MHz Horizontal Page 78 of 147 Report No.: BTL-FCCP-2-1408C111 Orthogonal Axis : X Test Mode : TX AC N20 Mode 5180MHz AC N20 Mode 5180MHz Vertical Page 79 of 147 Report No.: BTL-FCCP-2-1408C111 Orthogonal Axis : X Test Mode : TX AC N20 Mode 5180MHz AC N20 Mode 5180MHz Vertical Page 80 of 147 Report No.: BTL-FCCP-2-1408C111 Orthogonal Axis : X Test Mode : TX AC N20 Mode 5180MHz AC N20 Mode 5180MHz Horizontal Page 81 of 147 Report No.: BTL-FCCP-2-1408C111 Orthogonal Axis : X Test Mode : TX AC N20 Mode 5180MHz AC N20 Mode 5180MHz Horizontal Page 82 of 147 Report No.: BTL-FCCP-2-1408C111 Orthogonal Axis : X Test Mode : TX AC N20 Mode 5200MHz N20 Mode 5200MHz Vertical Page 83 of 147 Report No.: BTL-FCCP-2-1408C111 Orthogonal Axis : X Test Mode : TX AC N20 Mode 5200MHz N20 Mode 5200MHz Vertical Page 84 of 147 Report No.: BTL-FCCP-2-1408C111 Orthogonal Axis : X Test Mode : TX AC N20 Mode 5200MHz N20 Mode 5200MHz Horizontal Page 85 of 147 Report No.: BTL-FCCP-2-1408C111 Orthogonal Axis : X Test Mode : TX AC N20 Mode 5200MHz N20 Mode 5200MHz Horizontal Page 86 of 147 Report No.: BTL-FCCP-2-1408C111 Orthogonal Axis : X Test Mode : TX AC N20 Mode 5240MHz N20 Mode 5240MHz Vertical Page 87 of 147 Report No.: BTL-FCCP-2-1408C111 Orthogonal Axis : X Test Mode : TX AC N20 Mode 5240MHz N20 Mode 5240MHz Vertical Page 88 of 147 Report No.: BTL-FCCP-2-1408C111 Orthogonal Axis : X Test Mode : TX AC N20 Mode 5240MHz N20 Mode 5240MHz Horizontal Page 89 of 147 Report No.: BTL-FCCP-2-1408C111 Orthogonal Axis : X Test Mode : TX AC N20 Mode 5240MHz N20 Mode 5240MHz Horizontal Page 90 of 147 Report No.: BTL-FCCP-2-1408C111 Orthogonal Axis : X Test Mode : TX AC N40 Mode 5190MHz N40 Mode 5190MHz Vertical Page 91 of 147 Report No.: BTL-FCCP-2-1408C111 Orthogonal Axis : X Test Mode : TX AC N40 Mode 5190MHz N40 Mode 5190MHz Vertical Page 92 of 147 Report No.: BTL-FCCP-2-1408C111 Orthogonal Axis : X Test Mode : TX AC N40 Mode 5190MHz N40 Mode 5190MHz Horizontal Page 93 of 147 Report No.: BTL-FCCP-2-1408C111 Orthogonal Axis : X Test Mode : TX AC N40 Mode 5190MHz N40 Mode 5190MHz Horizontal Page 94 of 147 Report No.: BTL-FCCP-2-1408C111 Orthogonal Axis : X Test Mode : TX AC N40 Mode 5230MHz N40 Mode 5230MHz Vertical Page 95 of 147 Report No.: BTL-FCCP-2-1408C111 Orthogonal Axis : X Test Mode : TX AC N40 Mode 5230MHz N40 Mode 5230MHz Vertical Page 96 of 147 Report No.: BTL-FCCP-2-1408C111 Orthogonal Axis : X Test Mode : TX AC N40 Mode 5230MHz N40 Mode 5230MHz Horizontal Page 97 of 147 Report No.: BTL-FCCP-2-1408C111 Orthogonal Axis : X Test Mode : TX AC N40 Mode 5230MHz N40 Mode 5230MHz Horizontal Page 98 of 147 Report No.: BTL-FCCP-2-1408C111 Orthogonal Axis : X Test Mode : TX AC N80 Mode 5210MHz TX AC N80 Mode 5210MHz Vertical Page 99 of 147 Report No.: BTL-FCCP-2-1408C111 Orthogonal Axis : X Test Mode : TX AC N40 Mode 5210MHz AC N40 Mode 5210MHz Vertical Page 100 of 147 Report No.: BTL-FCCP-2-1408C111 Orthogonal Axis : X Test Mode : TX AC N40 Mode 5210MHz TX AC N40 Mode 5210MHz Horizontal Page 101 of 147 Report No.: BTL-FCCP-2-1408C111 Orthogonal Axis : X Test Mode : TX AC N40 Mode 5210MHz TX AC N40 Mode 5210MHz Horizontal Page 102 of 147 Report No.: BTL-FCCP-2-1408C111 Radiated Measurement Photos Radiated Measurement Photos Above 1000MHz Page 103 of 147 Report No.: BTL-FCCP-2-1408C111 ATTACHMENT ATTACHMENT E – 26DB BANDWIDTH Page 104 of 147 Report No.: BTL-FCCP-2-1408C111 Test Mode Channel Frequency (MHz) CH36 5180 CH40 5200 CH48 5240 est Mode :TX A Mode_CH36/CH40/CH48 Frequency 26dB Bandwidth (MHz) 99% Occupied (MHz) 21.80 17.00 21.80 17.00 22.00 17.10 TX CH36 Page 105 of 147 99% Occupied Bandwidth (MHz) 17.00 17.00 17.10 Report No.: BTL-FCCP-2-1408C111 TX CH40 TX CH48 Page 106 of 147 Report No.: BTL-FCCP-2-1408C111 Test Mode Channel Frequency (MHz) CH36 5180 CH40 5200 CH48 5240 est Mode :TX N20 Mode_CH36/CH40/CH48 Frequency 26dB Bandwidth (MHz) 99% Occupied (MHz) 22.80 18.10 22.60 18.10 22.80 18.10 TX CH36 Page 107 of 147 99% Occupied Bandwidth (MHz) 18.10 18.10 18.10 Report No.: BTL-FCCP-2-1408C111 TX CH40 TX CH48 Page 108 of 147 Report No.: BTL-FCCP-2-1408C111 Test Mode Channel Frequency (MHz) CH38 5755 CH46 5795 est Mode :TX N40 Mode_CH38/CH46 Frequency 26dB Bandwidth (MHz) 99% Occupied (MHz) 43.20 36.40 43.40 36.60 TX CH38 Page 109 of 147 99% Occupied Bandwidth (MHz) 36.40 36.60 Report No.: BTL-FCCP-2-1408C111 TX CH46 Page 110 of 147 Report No.: BTL-FCCP-2-1408C111 Test Mode : Channel Frequency (MHz) CH36 5180 CH40 5200 CH48 5240 :TX AC N20 Mode_CH36/CH40/CH48 Frequency 26dB Bandwidth (MHz) 99% Occupied (MHz) 22.70 18.10 22.60 18.10 22.90 18.10 TX CH36 Page 111 of 147 99% Occupied Bandwidth (MHz) 18.10 18.10 18.10 Report No.: BTL-FCCP-2-1408C111 TX CH40 TX CH48 Page 112 of 147 Report No.: BTL-FCCP-2-1408C111 Test Mode Channel Frequency (MHz) CH38 5755 CH46 5795 est Mode :TX AC N40 Mode_CH38/CH46 Frequency 26dB Bandwidth (MHz) 99% Occupied (MHz) 43.20 36.40 43.20 36.40 TX CH38 Page 113 of 147 99% Occupied Bandwidth (MHz) 36.40 36.40 Report No.: BTL-FCCP-2-1408C111 TX CH46 Page 114 of 147 Report No.: BTL-FCCP-2-1408C111 Test Mode Channel Frequency (MHz) CH42 5725 est Mode :TX AC N80 Mode_CH42 Frequency 26dB Bandwidth (MHz) 99% Occupied (MHz) 84.40 76.00 TX CH42 Page 115 of 147 99% Occupied Bandwidth (MHz) 76.00 Report No.: BTL-FCCP-2-1408C111 26DB BANDWIDTH 26DB BANDWIDTH Measurement Photos Page 116 of 147 Report No.: BTL…

Text truncated - open the document above for the full version.

Report No.: BTL-FCCP-2-1408C111 Conduc Conducted Measurement Photos Page 34 of 147 Report No.: BTL-FCCP-2-1408C111 Radiated Measurement Photos Radiated Measurement Photos 9KHz to 30MHz Page 37 of 147 Report No.: BTL-FCCP-2-1408C111 Radiated Measurement Photos Radiated Measurement Photos 30MHz to 1000MHz Page 45 of 147 Report No.: BTL-FCCP-2-1408C111 Radiated Measurement Photos Radiated Measurement Photos Above 1000MHz Page 103 of 147 Report No.: BTL-FCCP-2-1408C111 26DB BANDWIDTH 26DB BANDWIDTH Measurement Photos Page 116 of 147 Report No.: BTL-FCCP-2-1408C111 MAXIMUM OUTPUT POWER MAXIMUM OUTPUT POWER Measurement Photos Page 120 of 147 Report No.: BTL-FCCP-2-1408C111 ANTENNA CONDUCTED SPURIOUS EMISSION ANTENNA CONDUCTED SPURIOUS EMISSION Measurement Photos Page 127 of 147 Measurement Report No.: BTL-FCCP-2-1408C111 POWER SPECTRAL DENSITY POWER SPECTRAL DENSITY Measurement Photos Page 140 of 147 Report No.: BTL-FCCP-2-1408C111 FREQUENCY STABILITY FREQUENCY STABILITY Measurement Photos Page 143 of 147