KA2SL2730ET1Wireless N 150 ADSL2+ Modem Router

DSL-2730E User Manual FCC - PART 68 This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom carton of this equipment is a label that contains, among other information, a product identifier in the format US:3P7DL01B2730ET1 and REN:0.11B for this equipment. This equipment uses the following USOC jacks: RJ-11 A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See installation instructions for details. REN (RINGER EQUIVALENT NUMBERS) STATEMENT Notice: The Ringer Equivalence Number (REN) assigned to each terminal device provides an indication of the maximum number of terminals allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed 5. If this equipment US:3P7DL01B2730ET1 causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But if advance notice isn't practical, the telephone company will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary. The telephone company may make changes in its facilities, equipment, operations or procedures that could affect the operation of the equipment. If this happens the telephone company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted service. If trouble is experienced with this equipment US:3P7DL01B2730ET1, for repair or warranty information, please contact D-LINK Corporation. If the equipment is DSL-2730E User Manual causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved. Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission or corporation commission for information. If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this US:3P7DL01B2730ET1 does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer. This product meets the applicable Industry Canada technical specifications. / Le présent matériel est conforme aux specifications techniques applicables d’Industrie Canada. FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help. DSL-2730E User Manual FCC Radiation Exposure Statement This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and consider removing the no-collocation statement. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution! Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. i Contents 1 Introduction ........................................................................................................ 1 1.1 Packing List ........................................................................................... 1 1.2 Safety Precautions ................................................................................ 1 1.3 LEDs and Interfaces .............................................................................. 2 1.4 System Requirements ........................................................................... 4 1.5 Features ................................................................................................ 4 2 Hardware Installation ......................................................................................... 6 3 Web Configuration ............................................................................................. 7 3.1 Accessing the Device ............................................................................ 7 3.2 Setup ....…

Text truncated - open the document above for the full version.

D Link Corporation Declaration of Authorization We Name: D Link Corporation Address: 17595 Mt. Herrmann, Fountain Valley, California, United States Declare that: Name Representative of agent: Ms. Cathy Wang Agent Company name: Neutron Engineering, Inc. Address: No.3 Jinshagang 1 st Road, Shixia, Dalang Town City: Dong Guan Country: China is authorized to apply for Certification of the following product(s) and signing all the related documents including 731 forms: Product description: Wireless N 150 ADSL2+ Modem Router Type designation: DSL-2730E Trademark: D-Link on our behalf. Date: 2014-04-15 City: Fountain Valley Name: Angus Lin Function: Senior Manager Signature:

CERTIFICATE OF COMPLIANCE Ref No.: NEI-FCCE-1-1304C040A Date of Issue: Aug. 14, 2013 Authorized under Declaration of Conformity according to 47 CFR, Part 2 and Part 15 of the FCC Rules. The product listed in follows was (were) tested in the Neutron EMC Laboratory to comply with the criteria limits Class B of conducted and radiated emissions of the Technical Standards FCC Part 15, Subpart B, established by the FCC, USA. Equipment Wireless N 150 ADSL2+ Modem Router Model Name DSL-2730E Brand Name D-Link Applicant D-LINK Corporation Address No.289, Sinhu 3rd Rd., Neihu District Taipei City 114, Taiwan, R.O.C Standard(s) FCC Part 15, Subpart B: 2012 ANSI C63.4 -2009 The test data, data evaluation, and equipment configuration contained in our test report (Ref No. NEI-FCCE-1-1304C040A) were obtained utilizing the test procedures, test instruments, test sites that has been accredited by the Authority of TAF according to the ISO-17025 quality assessment standard and technical standard(s). The test data contained in the referenced test report relate only to the EUT sample and item(s) tested. Andy Chiu Authorized Signatory Neutron Engineering Inc. B1, No.37, Lane 365, Yang Guang St., NeiHu District 114., Taipei, Taiwan TEL：+886-2-2657-3299 FAX：+886-2-2657-3331

Neutron Engineering Inc. Project No.: 1304C040A Page 2 of 8 Neutron Engineering Inc. Project No.: 1304C040A Page 3 of 8 Neutron Engineering Inc. Project No.: 1304C040A Page 4 of 8 Adapter: F05W-1200500SPAU

608000021229XX 20140411 59.0 39.3 0 -0.2 0 -0.2 1 2 3 4 A B C D 56 1 2 3 4 56 A B C D Title: Editor Description Remark Date 壳底标贴位置示意图 BOTTOM LABEL 59*39.3MM S/N&MAC 标贴 30*22mm Reset

Neutron Engineering Inc. Project No.: 1304C040A Page 5 of 8 Neutron Engineering Inc. Project No.: 1304C040A Page 6 of 8 Neutron Engineering Inc. Project No.: 1304C040A Page 7 of 8 Neutron Engineering Inc. Project No.: 1304C040A Page 8 of 8

Neutron Engineering Inc. FCC RF EXPOSURE REPORT FCC ID: KA2SL2730ET1 Project No. : 1304C040A Equipment : Wireless N 150 ADSL2+ Modem Router Model : DSL-2730E Applicant : D Link Corporation Address : 17595 Mt. Herrmann, Fountain Valley, California, United States According: : FCC Guidelines for Human Exposure IEEE C95.1 Neutron Engineering Inc. MPE CALCULATION METHOD: Calculation Method of RF Safety Distance: where: S = power density P = power input to the antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna Ant. Manufacturer S/N Antenna Type Connector Gain (dBi) Note 1 HL TECHNOLOGY GROUP LIMITED 800000000234 Dipole N/A 2.3 Neutron Engineering Inc. TEST RESULTS EUT： Wireless N 150 ADSL2+ Modem Router Model Name ： DSL-2730E Temperature： 24 °C Relative Humidity： 55 % Pressure： 1016 hPa Test Voltage ： AC 120V/60Hz Test Mode ： TX B MODE /CH01, CH06, CH11 Antenna Gain (dBi) Antenna Gain (numeric) Peak Output Power (dBm) Peak Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Te s t Result 2.3 1.6982 17.26 53.2108 0.017986651 Complies 2.3 1.6982 17.45 55.5904 0.018791021 Complies 2.3 1.6982 17.49 56.1048 0.018964891 Complies EUT： Wireless N 150 ADSL2+ Modem Router Model Name ： DSL-2730E Temperature： 24 °C Relative Humidity： 60 % Pressure： 1016 hPa Test Voltage ： AC 120V/60Hz Test Mode ： TX G MODE /CH01, CH06, CH11 Antenna Gain (dBi) Antenna Gain (numeric) Peak Output Power (dBm) Peak Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Te s t Result 2.3 1.6982 22.15 164.0590 0.055456231 Complies 2.3 1.6982 22.04 159.9558 0.054069251 Complies 2.3 1.6982 22.37 172.5838 0.058337841 Complies Neutron Engineering Inc. EUT： Wireless N 150 ADSL2+ Modem Router EUT： DSL-2730E Temperature： 24 °C Temperature： 60 % Pressure： 1016 hPa Pressure： AC 120V/60Hz Test Mode ： TX N-20M MODE /CH01, CH06, CH11 Antenna Gain (dBi) Antenna Gain (numeric) Peak Output Power (dBm) Peak Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Te s t Result 2.3 1.6982 21.43 138.9953 0.046984041 Complies 2.3 1.6982 21.57 143.5489 0.048523301 Complies 2.3 1.6982 21.62 145.2112 0.049085181 Complies EUT： Wireless N 150 ADSL2+ Modem Router Model Name ： DSL-2730E Temperature： 24 °C Relative Humidity： 60 % Pressure： 1016 hPa Test Voltage ： AC 120V/60Hz Test Mode ： TX N-40M MODE /CH03, CH06, CH09 Antenna Gain (dBi) Antenna Gain (numeric) Peak Output Power (dBm) Peak Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Te s t Result 2.3 1.6982 20.17 103.9920 0.035152031 Complies 2.3 1.6982 20.32 107.6465 0.036387351 Complies 2.3 1.6982 20.44 110.6624 0.037406781 Complies Note: the calculation distance is 20cm.

Neutron Engineering Inc. Report No.: NEI-FCCP-1-1304C040A Page 122 of 123 9. EUT TEST PHOTO Conducted Measurement Photos Neutron Engineering Inc. Report No.: NEI-FCCP-1-1304C040A Page 123 of 123 Radiated Measurement Photos