KA2SM260A1MirrorStreamer TV Adapter

QUICK INSTALLATION GUIDE MirrorStreaMer tV adapter for MiracaSt™ WireleSS diSplay dSM-260 Guía de InstalacIón RápIda GuIa de Instalação RápIda 快速安裝指南 p etunjuk pemasanGan cepat WireleSS Net Wor K re MiNder dS M-260 2 ENGLISH If any of the above items are missing, please contact your reseller. DSM-260 MirrorStreamer TV Adapter Micro USB Cable A/V Cable Quick Install Guide Package Contents Minimum Requirements • Mobile Device (Smart Phone/Tablet) or Laptop with installed wireless adapter • TV with an HDMI input (for HD quality) or composite analog connections. • Wireless router with Internet connection (WAN Mode) 1 Micro USB Port Connect the supplied USB cable here 2 Mode/ Reset Press and hold up to 5 seconds to toggle between Moracast and DLNA mode. Press and hold between 5-10 seconds to reboot the DSM-260. Press and hold over 15 seconds to reset the DSM-260 to the factory default settings. 3 A/V Port Firmly connect the supplied A/V cable here and the other end into your TV or home theater receiver. If you are using an HDMI connection, you do not have to connect this cable. Note that you can only receive up to 480p quality with a composite connection. 4 HDMI Port Connect an HDMI cable (not included) here and the other end into your TV or home theater receiver. Must be used for HD quality (720p/1080p) display. Hardware Overview 21 Left SideRight SideBottom 34 dS M-260 3 ENGLISH Download the D-Link Remote app from either the App Store (iOS) or Google Play (Android) or scan the QR code below. Note: Your TV remote may work with the DSM-260 but you will need the Remote app to enter text. Before you Start Apple iOSAndroid 1 1 Plug an HDMI cable to the HDMI port on the DSM-260 then connect to an HDMI port on your TV. Note that HDMI is required for HD resolution. Connect to Your TV 2 Plug the supplied micro USB cable to the USB port on the DSM-260 then connect to a USB port on your TV or to a USB power adapter (not included). Note: The USB port is only for power, not data transfer. HDMIHDMI OR 2 dS M-260 4 ENGLISH 3 The LED on the top of the DSM- 260 will illuminate blue. Switch your TV channel to the correct HDMI input source. You will see the D-Link logo on the TV followed by the main menu. 4 On your mobile device, open the wireless utility and connect to the DSM-260. The wireless settings will be displayed on the bottom of the menu screen. 5 Once you connect you can use either your TV remote or the downloaded D-Link Remote app to navigate. Select Miracast and enter. Note: The remainder of this Install Guide will assume that you have installed the D-Link Remote app. Miracast Users 6 On your mobile device, change the wireless display to ON and select the DSM-260. Allow a few seconds to authenticate. 7 The display on your mobile device will now be displayed on your TV. Your Miracast setup is complete! dS M-260 5 ENGLISH 3 The LED on the top of the DSM-260 will illuminate blue. Switch your TV channel to the correct HDMI input source. You will see the D-Link logo on the TV followed by the main menu. 4 On your mobile device, open the wireless utility and connect to the DSM-260. The wireless settings will be displayed on the bottom of the menu screen. 5 Once you connect you can use either your TV remote or the downloaded D-Link Remote app to navigate. Select Setting and press OK. Non-Miracast Users (DLNA*) 6 Select Network and press the right arrow button. Select WAN (if connecting to wireless router) or Wi-Fi Hotspot (if displaying content from your device only without an Internet connection). * DLNA (Digital Living Network Alliance) is a industry standard technology that allows devices on your home network to share video, music, and photos. dS M-260 6 ENGLISH WAN Mode - If you want to stream content from the Internet (e.g., stream a video from YouTube) to your TV, use this mode. The DSM-260 and your mobile devices must connect to your wireless router. A - WAN Mode Wi-Fi Hotspot Mode (default) - This mode allows you to connect wirelessly from the DSM-260 to your laptop or mobile device and stream local content to your TV. If you need an Internet connection, use WAN Mode. B - Wi-Fi Hotspot Mode dS M-260 7 ENGLISH Another alternative to non-Miracast phones is to download the MirrorOp app. The DSM-260 is a MirrorOp receiver and will work with most MirrorOp-enabled senders such as your iPad, iPhone, Android devices, Windows, Mac, and Blackberry devices. Simply launch the app, select the DSM-260 from the list of available MirrorOp receivers, and press Play. Visit http://www.mirrorop.com for more information and to download the MirrorOp sender app. MirrorOp If are unable to see a picture on your TV: If connected directly to your TV • Ensure that the USB adapter is connected properly to your DSM-260 and that it is plugged in to a working USB port (or power adapter). • Verify that the cables for your DSM-260 and your TV are pushed in all the way and in the correct ports. If connected to your home theater receiver • Verify that the cables for your DSM-260, TV, and receiver are pushed in all the way and in the correct ports. Troubleshooting dS M-260 8 ENGLISH TECHNICAL SUPPORT Australia: tel: 1300-766-868 24/7 technical support Web: http://www.dlink.com.au e-mail: [email protected] India: tel: +91-22-27626600 toll Free 1800-22-8998 W eb: www.dlink.co.in e-mail: [email protected] Singapore, Thailand, Indonesia, Malaysia, Philippines, Vietnam: singapore - www.dlink.com.sg thailand - www.dlink.co.th Indonesia - www.dlink.co.id malaysia - www.dlink.com.my philippines - www.dlink.com.ph Vietnam - www.dlink.com.vn Korea: tel : +82-2-2028-1810 m onday to Friday 9:00am to 6:00pm Web : http://d-link.co.kr e-mail : [email protected] New Zealand: tel: 0800-900-900 24/7 technical support Web: http://www.dlink.co.nz e-mail: [email protected] South Africa and Sub Sahara Region: tel: +27 12 661 2025 08600 dlInk (for south africa only) monday to Friday 8:30am to 9:00pm south africa time W eb: http://www.d-link.co.za e…

Text truncated - open the document above for the full version.

Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Industry Canada statement: This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme à la norme CNR-210 d'Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable. Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Déclaration d'exposition aux radiations: Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.

WARRANTY & SAFETY INFORMATION Garantie- und SicherheitSbeStimmunGen Garantie & inFOrmatiOn Sur La SÉcuritÉ Garantía e inFOrmación SObre SeGuridad Garanzia e inFOrmaziOni SuLLa Sicurezza Garantie & VeiLiGheid 2 Limited product warranty............................................................3 european community declaration of conformity & notice of wireless radio lan usage...........................................................27 Safety instructions.....................................................................31 disposing and recycling your product (Weee )..........................36 TABLE OF CONTENTS 3 COUNTRIES IN WHICH THIS D-LINK LIMITED PRODUCT WARRANTY APPLIES aLbania andOrra auStria beLGium bOSnia herzeGOVina buLGaria crOatia czech rePubLic denmarK eSt Onia FinLand France GermanY Greece hunGarY iceLand ireLand itaLY LatVia LiechtenStein Lithuania LuXembOurG macedOnia maL ta mOLdOVa mOnacO netherLandS nOr WaY POLand POrtuGaL rOmania San marinO Serbia and mOnteneGrO SLOVaKia SLOVenia SPain SWeden SWitzerLand united KinGdOm Vatican citY 4 ENGLISH LIMITED PRODUCT WARRANTY GENERAL TERMS nothing in this Limited Product Warranty affects your statutory rights as a consumer. the Limited Product Warranty set forth below is given by d-L in K ( europe) Ltd. (herein referred to as "d-L in K"). this Limited Product Warranty is only effective upon presentation of the proof of purchase. upon further request by d-LinK, this warranty card has to be presented, too. eXce Pt aS eXP re SSLY Set FO rth in thi S L imited W arrantY, d-L in K ma KeS nO Other W arrantieS, eXP re SS O r im PL ied , inc Ludin G an Y im PL ied W arrantieS OF merchantabiLit Y and F itne SS FO r a ParticuLar P ur POS e. d-L in K eXP re SSLY di ScLaim S aLL W arrantieS nOt S tated in thi S L imited W arrantY. an Y im PL ied W arrantieS that ma Y be im POS ed bY L aW are L imited in duratiOn tO the L imited WarrantY P eri Od. tO the eXtent aLLOWed bY LOcaL LaW, the remedieS in thiS WarrantY Statement are cu StOmer ’S SOLe and eXcLuSiVe remedieS aGain St d-L in K. the Y dO nOt, hOW eVer , aFF ect O r re Strict the ri Ght S YO u ha Ve aGain St the bu Sine SS YOu bOuGht a d-L in K P rOduct F rOm. in nO eVent W iLL d-L in K be L iab Le FO r LOSS OF data O r FO r indirect, SP ecia L, incidentaL, cOnSeQuentiaL ( inc Ludin G LOSt PrOF it O r data ), O r O ther damaGe, W hether ba Sed in cOntract, tOrt , O r OtherWiSe. hOWeVer, nOthinG in thiS aGreement LimitS d-LinK'S LiabiLitY tO YOu (i) in the eVent OF death O r P er SO na L in Jur Y tO the eXtent re SuLtin G F rOm d-L in K'S ne GL iGence, O r ( ii ) tO the eXtent re SuLtin G F rOm an Y F rauduLent mi Sre Pre SentatiOn O n the P art OF d-L in K, O r ( iii ) tO the eXtent ari Sin G under Part 1 OF the cOnSumer P rOtectiOn act 1987 OF the united K in GdOm. SO me State S O r cOuntrieS dO nOt aLLOW: (1) a di ScLaimer OF im PL ied W arrantieS; (2) a L imitatiOn O n hOW LOnG an im PL ied W arrantY L aStS O r the eXcLuSiOn; O r (3) LimitatiOn OF incidentaL Or cOnSeQuentiaL damaGeS FOr cOnSumer PrOductS. in S uch S tate S O r cOuntrieS, SO me eXcLuSiOnS O r L imitatiOnS OF thi S L imited WarrantY ma Y nOt aPPLY tO YO u. thi S L imited W arrantY G iVeS YO u SP eci Fic LeGaL ri Ght S. YO u ma Y aLSO ha Ve O ther ri Ght S that ma Y V ar Y F rOm S tate tO State O r F rOm cOuntr Y tO cOuntr Y. YO u are ad ViSed tO cOnSuLt aPPL icab Le State Or cOuntrY La WS FOr a FuLL determinatiOn OF YOur riGhtS. this Limited Product Warranty applies to d-L in K branded hardware products (collectively referred to as “d-L in K hardware Products”) sold by d-L in K ( europe) Ltd., its european subsidiaries, affiliates, authorized resellers, or country distributors (collectively referred to as “d-LinK resellers”) with this Limited Product Warranty. the term “d-LinK hardware Product” is limited to the hardware components and all its internal components including firmware. the term “d-L in K hardware Product” dOeS nOt include any software applications or programs. GEOGRAPHICAL SCOPE OF THE LIMITED PRODUCT WARRANTY this Limited Product Warranty is applicable to hardware Products sold by d-Link resellers in all countries listed at the beginning of this document under the heading “countries in which this d-L in K Limited Product Warranty applies”. the Limited Product Warranty will be honoured in any country where d-LinK or its authorized service providers offer warranty service subject to the terms and conditions set forth in this Limited Product Warranty. however, warranty service availability and response times may vary from country to country and may also be subject to registration requirements. 5 ENGLISH LIMITATION OF PRODUCT WARRANTY d-LinK warrants that the products described below under normal use are free from material defects in materials and workmanship during the Limited Product Warranty Period set forth below ("Limited Product Warranty Period"), if the product is used and serviced in accordance with the user manual and other documentation provided to the purchaser at the time of purchase (or as amended from time to time). d-L inK does not warrant that the products will operate uninterrupted or error-free or that all deficiencies, errors, defects or non-conformities will be corrected. this warranty shall not apply to problems resulting from: (a) unauthorised alterations or attachments; (b) negligence, abuse or misuse, including failure to operate the product in accordance with specifications or interface requirements; (c) improper handling; (d) failure of goods or services not obtained from d-LinK or not subject to a then-effective d-LinK warranty or maintenance agreement; (e) improper use or storage; or (f) fire, water, acts of God or other catastrophic events. this warranty shall also not apply to any particular product if any d-L in K serial number has been removed or defaced in any way. d-LinK iS nOt reSPOnSibLe FOr damaGe that OccurS aS a reSuLt OF YOur FaiLure tO FOLLOW the inStructiOnS FOr the…

Text truncated - open the document above for the full version.

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2 Page 3

FCC ID: KA2SM260A1 Report No.: RF 130328C33 Operational Description This device is a MirrorStreamer TV Adapter, which operates in 2.4GHz band; the maximum data rate could be up to 72.2Mbps which OFDM technique. If the signal to noise radio is too poor which could not support 72.2Mbps, the 11Mbps data rate with DSSS technique will be applied. The transmitter of the EUT is powered by 5Vdc host equipment. The antenna is Printed antenna without antenna connector. For more detailed instruction, please take a look at the user’s manual.

Report No.: SA130328C33 1 of 6 Report Format Version 5.0.0 RF EXPOSURE REPORT REPORT NO.: SA130328C33 MODEL NO.: DSM-260 FCC ID: KA2SM260A1 RECEIVED: Mar. 29, 2013 TESTED: Apr. 04 ~ Apr. 26, 2013 ISSUED: Apr. 26, 2013 APPLICANT: D-Link Corporation ADDRESS: 17595 Mt. Hermann, Fountain Valley, CA 92708, U.S.A. ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-com pliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by any government agencies. Report No.: SA130328C33 2 of 6 Report Format Version 5.0.0 TABLE OF CONTENTS RELEASE CONTROL RECORD ................................................................................................ 3 1. CERTIFICATION ............................................................................................................. 4 2. RF EXPOSURE ............................................................................................................... 5 2.1 LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) ......................................... 5 2.2 MPE CALCULATION FORMULA .................................................................................... 5 2.3 CLASSIFICATION ........................................................................................................... 5 2.4 CALCULATION RESULT OF MAXIMUM CONDUCTED POWER .................................. 6 Report No.: SA130328C33 3 of 6 Report Format Version 5.0.0 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED SA130328C33 Original release. Apr. 26, 2013 Report No.: SA130328C33 4 of 6 Report Format Version 5.0.0 1. CERTIFICATION PRODUCT: MirrorStreamer TV Adapter MODEL: DSM-260 BRAND: D-Link APPLICANT: D-Link Corporation TESTED: Apr. 04 ~ Apr. 26, 2013 TEST SAMPLE: ENGINEERING SAMPLE STANDARDS: FCC Part 2 (Section 2.1091) FCC OET Bulletin 65, Supplement C (01-01) IEEE C95.1 The above equipment (Model: DSM-260) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE : Apr. 26, 2013 Suntee Liu / Specialist APPROVED BY : , DATE : Apr. 26, 2013 Ken Liu / Senior Manager Report No.: SA130328C33 5 of 6 Report Format Version 5.0.0 2. RF EXPOSURE 2.1 LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) FREQUENCY RANGE (MHz) ELECTRIC FIELD STRENGTH (V/m) MAGNETIC FIELD STRENGTH (A/m) POWER DENSITY (mW/cm 2 ) AVERAGE TIME (minutes) LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE 300-1500 ... ... F/1500 30 1500-100,000 ... ... 1.0 30 F = Frequency in MHz 2.2 MPE CALCULATION FORMULA Pd = (Pout*G) / (4*pi*r2) where Pd = power density in mW/cm2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 2.3 CLASSIFICATION The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. Report No.: SA130328C33 6 of 6 Report Format Version 5.0.0 2.4 CALCULATION RESULT OF MAXIMUM CONDUCTED POWER MAX POWER (dBm) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/cm 2 ) LIMIT (mW/cm 2 ) 23.87 1.84 20 0.074 1 ---END---

Report No.: RF130328C33 1 of 46 Report Format Version 5.1.0 FCC TEST REPORT REPORT NO.: RF130328C33 MODEL NO.: DSM-260 FCC ID: KA2SM260A1 RECEIVED: Mar. 29, 2013 TESTED: Apr. 04 ~ Apr. 26, 2013 ISSUED: Apr. 26, 2013 APPLICANT: D-Link Corporation ADDRESS: 17595 Mt. Hermann, Fountain Valley, CA 92708, U.S.A. ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the com pliance or non-compliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF130328C33 2 of 46 Report Format Version 5.1.0 TABLE OF CONTENTS RELEASE CONTROL RECORD ............................................................................................................ 4 1. CERTIFICATION ..................................................................................................................... 5 2. SUMMARY OF TEST RESULTS ............................................................................................ 6 2.1 MEASUREMENT UNCERTAINTY .......................................................................................... 6 3. GENERAL INFORMATION ..................................................................................................... 7 3.1 GENERAL DESCRIPTION OF EUT ....................................................................................... 7 3.2 DESCRIPTION OF TEST MODES ......................................................................................... 8 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ......................................... 9 3.3 DESCRIPTION OF SUPPORT UNITS ................................................................................. 11 3.3.1 CONFIGURATION OF SYSTEM UNDER TEST .................................................................. 11 3.4 GENERAL DESCRIPTION OF APPLIED STANDARDS ...................................................... 12 4. TEST TYPES AND RESULTS .............................................................................................. 13 4.1 RADIATED EMISSION AND BANDEDGE MEASUREMENT ............................................... 13 4.1.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT ............................ 13 4.1.2 TEST INSTRUMENTS .......................................................................................................... 14 4.1.3 TEST PROCEDURES ........................................................................................................... 15 4.1.4 DEVIATION FROM TEST STANDARD ................................................................................. 15 4.1.5 TEST SETUP ........................................................................................................................ 16 4.1.6 EUT OPERATING CONDITIONS ......................................................................................... 16 4.1.7 TEST RESULT ...................................................................................................................... 17 4.2 CONDUCTED EMISSION MEASUREMENT ....................................................................... 27 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT ..................................................... 27 4.2.2 TEST INSTRUMENTS .......................................................................................................... 27 4.2.3 TEST PROCEDURES ........................................................................................................... 28 4.2.4 DEVIATION FROM TEST STANDARD ................................................................................. 28 4.2.5 TEST SETUP ........................................................................................................................ 28 4.2.6 EUT OPERATING CONDITIONS ......................................................................................... 28 4.2.7 TEST RESULTS .................................................................................................................... 29 4.3 6DB BANDWIDTH MEASUREMENT ................................................................................... 31 4.3.1 LIMITS OF 6DB BANDWIDTH MEASUREMENT ................................................................. 31 4.3.2 TEST SETUP ........................................................................................................................ 31 4.3.3 TEST INSTRUMENTS .......................................................................................................... 31 4.3…

Text truncated - open the document above for the full version.

1 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST 2 RADIATED EMISSION TEST