KA2SPW110A1mydlinkTM Wi-Fi SMART PLUG

DSP-W110 User Manual mydlink™ Wi-Fi Smart Plug Version DRAFT | 04/29/2014 2D-Link DSP-W110 User Manual Section 1 - Product Overview Hardware Overview LEDs and Buttons 1WPS/Reset Button WPSPress for one second to start the WPS connection process. The Status LED will start t o blink. ResetPress and hold for 10 seconds to reset the device back to the factory default settings. 2ON/OFF ButtonPress to turn the device ON or OFF. 3Status LED Solid GreenThe device is successfully connected to your network. Blinking GreenDuring the WPS process. Blinking OrangeThe device is attempting to communicate with your wireless network. Solid RedDuring power on/boot process or device is defective. 4Power LED Solid GreenThe device is powered on. will not power on, try another outlet. 5PlugConnect your appliances, lamps, and other devices to monitor. 1 2 3 4 5 3D-Link DSP-W110 User Manual Section 2 - Installation and Setup Installation and Setup Smart Plug. Step 1 Download the app from the App Store (iOS) or Google Pla y (Android). Step 2 Once installed, launch the app. Step 3 Next to continue. 4D-Link DSP-W110 User Manual Section 2 - Installation and Setup Step 4 When the Sta tus LED is blinking orange, press Next. Step 5 If your router supports WPS, press the WPS button on your router . Press Next to continue. Please ref er to your router’s documenta tion if you ar e unsure if your router supports WPS. If your router does not support WPS or you want to manually connect to your wireless router , press Manual Setup and skip to Step 6 - Manual on page 11. 5D-Link DSP-W110 User Manual Section 2 - Installation and Setup Step 6 - WPS Press the WPS button on your Smart Plug. The Sta tus LED will start to blink green. Allow up to two minutes to connect to your router . Press Next to continue. Note: You must press the WPS button on your router and the Smart Plug within two minutes. Step 7 - WPS After about two minutes, the Status LED will turn solid green. This indicates that the Smart Plug has successfully connected to your wireless router . Press Next t o continue. 6D-Link DSP-W110 User Manual Section 2 - Installation and Setup Step 6 - Manual You must connect to the Smart Plug directly. Do not close this app. On your device, go to Settings > Wi-Fi. Select the network called DSP- xxxx or DSP-xxxx_AC. Note: xxxx represents numbers and/or letters that are unique to your Smart Plug device. For the exact network name (SSID), refer to the Quick Install card that came with the product. Press Next t o continue. Step 7 - Manual Enter the PIN code and press Connect. This code is located both on the fr ont of the Smart Plug and the Quick Install card. 7D-Link DSP-W110 User Manual Section 2 - Installation and Setup Step 8 - Manual A list of available wireless networks will appear. Press your wireless network (the SSID of your wireless router). Step 9 - Manual If you have secured your wireless network, enter your Wi-Fi password and click Join. Continue with step 10 on the next page. 8D-Link DSP-W110 User Manual Section 2 - Installation and Setup Step 10 Once you connect, you will need to connect to your mobile device or tablet (that you ar e currently running the app fr om) to your wireless router (if you are not already). Make sure you keep this app running. On your device, go to Settings > Wi-Fi. Connect to your wireless router and enter your Wi-Fi password (if you have one). Go back to this app and press Next t o continue. Step 11 Your device will now scan your network for Smart Plugs. 9D-Link DSP-W110 User Manual Section 2 - Installation and Setup Step 12 If you have received this error message, please do the following: a. Please make sure your mobile device is connected to your router. b. Make sure the Power LED and Sta tus LEDs on your Smart Plug ar e both solid green. c. Press Hardware Settings and ver ify the settings. d. Press Discovery Again t o rescan. Step 13 Enter a nickname for your Smart Plug. Click Change your Icons to change the ic on for your device or click Done in the upper right corner 10D-Link DSP-W110 User Manual Section 2 - Installation and Setup Step 14 Select an ic on that represents the device plugged in to your Smart Plug and then press Use in the upper rig ht corner. If you do not want to change the icon, press Cancel. Step 15 Your settings will now save. 11D-Link DSP-W110 User Manual Appendix - Warranty Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one of the following measures: • Reorient or r elocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit di erent from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modi cations not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE: Radiation Exposure Statement: This equipment complie…

Text truncated - open the document above for the full version.

Page 1 CONSTRUCTION PHOTOS OF EUT

1 ‐ Label sample : ‐ Label Location as below Label Drawing Location

Page 2 Page 3 Page 4 Page 5

FCC ID: KA2SPW110A1 Report No.: RF140224C07 Operational Description This device is a mydlink TM Wi-Fi SMART PLUG, which operates in 2.4GHz bands; the maximum data rate could be up to 300Mbps which OFDM technique. If the signal to noise radio is too poor which could not support 300Mbps, the 54Mbps data rate with OFDM technique will be applied. The transmitter of the EUT is powered by 100-120Vac. The antenna is PCB antenna without antenna connector. The other instruction, please have a look at the users manual.

Report No.: SA140224C07 1 of 5 Report Format Version 5.0.0 RF EXPOSURE REPORT REPORT NO.: SA140224C07 MODEL NO.: DSP-W110 FCC ID: KA2SPW110A1 RECEIVED: Feb. 19, 2014 TESTED: Feb. 19 ~ May 06, 2014 ISSUED: May 08, 2014 APPLICANT: D-LINK CORPORATION ADDRESS: 17595 Mt. Hermann Fountain Valley, CA 92708, U.S.A. ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-com pliance to the specification. Report No.: SA140224C07 2 of 5 Report Format Version 5.0.0 TABLE OF CONTENTS RELEASE CONTROL RECORD ................................................................................................ 3 1. CERTIFICATION ............................................................................................................ 4 2. RF EXPOSURE .............................................................................................................. 5 2.1 LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) ........................................ 5 2.2 MPE CALCULATION FORMULA ................................................................................... 5 2.3 CLASSIFICATION .......................................................................................................... 5 2.4 CALCULATION RESULT OF MAXIMUM CONDUCTED POWER ................................. 5 Report No.: SA140224C07 3 of 5 Report Format Version 5.0.0 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED SA140224C07 Original release May 08, 2014 Report No.: SA140224C07 4 of 5 Report Format Version 5.0.0 1. CERTIFICATION PRODUCT: mydlink TM Wi-Fi SMART PLUG MODEL NO.: DSP-W110 BRAND: D-Link APPLICANT: D-LINK CORPORATION TESTED: Feb. 19 ~ May 06, 2014 TEST SAMPLE: ENGINEERING SAMPLE STANDARDS: FCC Part 2 (Section 2.1091) FCC OET Bulletin 65, Supplement C (01-01) IEEE C95.1 The above equipment (model: DSP-W110) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE :May 08, 2014 Jemma Yang / Specialist APPROVED BY : , DATE :May 08, 2014 Ken Liu / Senior Manager Report No.: SA140224C07 5 of 5 Report Format Version 5.0.0 2. RF EXPOSURE 2.1 LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) FREQUENCY RANGE (MHz) ELECTRIC FIELD STRENGTH (V/m) MAGNETIC FIELD STRENGTH (A/m) POWER DENSITY (mW/cm 2 ) AVERAGE TIME (minutes) LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE 300-1500 ... ... F/1500 30 1500-100,000 ... ... 1.0 30 F = Frequency in MHz 2.2 MPE calculation Formula Pd = (Pout*G) / (4*pi*r 2 ) where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 2.3 Classification The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. 2.4 Calculation result of maximum conducted power FREQUENCY BAND (MHz) MAX POWER (dBm) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/cm 2 ) LIMIT (mW/cm 2 ) 2412-2462 27.29 3.01 20 0.213 1 NOTE: Directional gain = 0dBi + 10log(2) = 3.01dBi

Report No.: RF140224C07 1 of 60 Report Format Version 5.2.0 FCC TEST REPORT REPORT NO.: RF140224C07 MODEL NO.: DSP-W110 FCC ID: KA2SPW110A1 RECEIVED: Feb. 19, 2014 TESTED: Feb. 19 ~ May 08, 2014 ISSUED: May 08, 2014 APPLICANT: D-LINK CORPORATION ADDRESS: 17595 Mt. Hermann Fountain Valley, CA 92708, U.S.A. ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-com pliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF140224C07 2 of 60 Report Format Version 5.2.0 TABLE OF CONTENTS RELEASE CONTROL RECORD ................................................................................................................ 4 1. CERTIFICATION ............................................................................................................................ 5 2. SUMMARY OF TEST RESULTS ................................................................................................... 6 2.1 MEASUREMENT UNCERTAINTY ................................................................................................ 6 3. GENERAL INFORMATION ............................................................................................................ 7 3.1 GENERAL DESCRIPTION OF EUT .............................................................................................. 7 3.2 DESCRIPTION OF TEST MODES ................................................................................................ 8 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ................................................ 9 3.3 DUTY CYCLE OF TEST SIGNAL ................................................................................................ 11 3.4 DESCRIPTION OF SUPPORT UNITS ........................................................................................ 12 3.4.1 CONFIGURATION OF SYSTEM UNDER TEST ......................................................................... 12 3.5 GENERAL DESCRIPTION OF APPLIED STANDARDS ............................................................. 13 4. TEST TYPES AND RESULTS ..................................................................................................... 14 4.1 RADIATED EMISSION AND BANDEDGE MEASUREMENT ..................................................... 14 4.1.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT ................................... 14 4.1.2 TEST INSTRUMENTS ................................................................................................................. 15 4.1.3 TEST PROCEDURES ................................................................................................................. 16 4.1.4 DEVIATION FROM TEST STANDARD ....................................................................................... 16 4.1.5 TEST SETUP ............................................................................................................................... 17 4.1.6 EUT OPERATING CONDITIONS ................................................................................................ 17 4.1.7 TEST RESULTS .......................................................................................................................... 18 4.2 CONDUCTED EMISSION MEASUREMENT .............................................................................. 32 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT ........................................................... 32 4.2.2 TEST INSTRUMENTS ................................................................................................................. 32 4.2.3 TEST PROCEDURES ................................................................................................................. 33 4.2.4 DEVIATION FROM TEST STANDARD ....................................................................................... 33 4.2.5 TEST SETUP ............................................................................................................................... 33 4.2.6 EUT OPERATING CONDITIONS ................................................................................................ 33 4.2.7 TEST RESULTS .......................................................................................................................... 34 4.3 6DB BANDWIDTH MEASUREMENT .......................................................................................... 36 4.3.1 LIMITS OF 6DB BANDWIDTH MEASUREMENT ...........................…

Text truncated - open the document above for the full version.

1 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST 2 RADIATED EMISSION TEST 3 (Fixture)