KR5-420220826Integrated Body Control Module

User Manual Integrated Body Control Module Model# 420220826 . Equipment: Integrated Body Control Module Model: 420220826 Trade: Continental FCC:KR5-420220826 IC 7812D-420220826 General Product Functional Description The IBC Honda MY24 Cendric consist of SMART system (PASE part) and MICU (Multiplex Integrated Control Unit) system. Both systems are integrated within a single PCB. The main features of MICU system including: • Light control • Wiper control • Fog control • Head light washer control • Diagnostics • Door lock control, etc Continental Model: 420220826 Product: Integrated Body Control Module FCC ID: KR5-420220826 IC: 7812D-420220826 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. No changes shall be made to the equipment without the manufacturer’s permission as this may void the user’s authority to operate the equipment. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :(1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

Internal Continental Automotive Technologies GmbH Siemensstrasse 12 93055 Regensburg Germany Date: October 4, 2022 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding FCC ID: KR5-420220826 To whom it may concern: We, the undersigned, hereby authorize Kevin Tsai / Deputy Manager of SGS Compliance Certification Services Inc. to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Continental Automotive Technologies GmbH. This authorization is valid until further written notice from the applicant. Yours sincerely, ___________________________ ______________________ Thomas Heselberger Bettina Christ Head of Homologation Homologation Manager +49-941-790-3554 +49-6073 123647 [email protected] [email protected] @ntinentai' Continental Automotive Tohnologlee @mbH Siemensstrae 12 93065 Regensburg

Applicant Declaration Applicant Declaration Rev:0.0 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Continental Automotive Technologies GmbH Address Siemensstrasse 12 93055 Regensburg Germany Grantee Code KR5 FCC ID KR5-420220826 Authorized Contact Name Thomas Heselberger Contact Email [email protected] Contact Phone +49-941-790-3554 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Applicant Signature: Date:October 4, 2022 Print Name: Thomas Heselberger Title: Head of Homologation *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database @ntinentai' Continental Automotive Tohnologlee @mbH Siemensstrae 12 93065 Regensburg

Internal Continental Automotive Technologies GmbH Siemensstrasse 12 93055 Regensburg Germany Date: October 4, 2022 To: SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States Regarding: Confidentiality Request regarding application for FCC ID: KR5-420220826 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. • Schematic(s) • Block Diagrams • Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential until the device is marketed or 180 days from the grant date, whichever is less. If the device is marketed within 180 days of the Grant Date, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. • External Photos • Internal Photos • Test Setup Photos • User manual(s) Sincerely, ___________________________ ______________________ Thomas Heselberger Bettina Christ Head of Homologation Homologation Manager +49-941-790-3554 +49-6073 123647 @ntinentai' Continental Automotive Tohnologlee @mbH Siemensstrae 12 93065 Regensburg Internal [email protected] [email protected]

This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Project No.: TM-2209000070P-1 Page 1 / 11 Rev. 01 APPENDIX 1 - PHOTOGRAPHS OF EUT EXTERNAL PHOTOGRAPHS OF EUT This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Project No.: TM-2209000070P-1 Page 2 / 11 Rev. 01 This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Project No.: TM-2209000070P-1 Page 3 / 11 Rev. 01 This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Project No.: TM-2209000070P-1 Page 4 / 11 Rev. 01 This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Project No.: TM-2209000070P-1 Page 5 / 11 Rev. 01 This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Project No.: TM-2209000070P-1 Page 6 / 11 Rev. 01 Transmitter LF Antenna (TX 125kHz)

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Project No.: TM-2209000070P-1 Page 7 / 11 Rev. 01 INTERNAL PHOTOGRAPHS OF EUT This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Project No.: TM-2209000070P-1 Page 8 / 11 Rev. 01 This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Project No.: TM-2209000070P-1 Page 9 / 11 Rev. 01 RF IC (TX) This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Project No.: TM-2209000070P-1 Page 10 / 11 Rev. 01 RF IC (RX) Crystal (RX) This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Project No.: TM-2209000070P-1 Page 11 / 11 Rev. 01 Receiver Internal Antenna (RX 433.92MHz)

This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Project No.: TM-2209000070P Page 1 / 1 Report No.: TMWK2212005130KS Rev. 00 FCC ID: KR5-420220826 According to 447498 D04 Interim General RF Exposure Guidance v01 section 2.1.2, The power is no more than 1 mW, regardless of separation distance. This exemption applies to all operating configurations and exposure conditions. The Max Peak field strength is 15.11 dBuV/m for 300m. 15.11 dBuV/m+(40*LOG(300/3) = 95.11 dBuV/m for 3m. 95.11 dBuV/m = -2.27 dBm (ERP) The Max ERP power is -2 dBm, therefore the power is -2.00 dBm(0.63095734 mW)@ 125.00 kHz The power is no more than 1 mW, this device complies with the exemption. Note: 1. The Max field strength of the test report TMWK2209003635KR for RF Exposure assessment purpose.

Model# 420220826 Antenna SPEC TX 125kHz: LF antenna / 0 dBi Antenna Brand: Continental Antenna model number: 38387-TZ5 -A010-M1 RX 433.92MHz: 3D loop antenna / -1 dBi Antenna Brand: Continental Antenna model number: A3C03950000, A3C03950100 TX 125 antenna

Project No.: TM-2209000070P Page 1 / 27 Report No.: TMWK2209003635KR Rev. 00 No.11, Wugong 6th Rd., Wugu Dist., New Taipei City , Taiwan /新北市五股區五工六路11號 t:(886-2) 2299-9720 f:(886-2) 2299-9721 www.sgs.com.tw Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of client’s instruction, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Compliance Certification Services Inc. 程智科技股份有限公司 Member of the SGS Group FCC RADIO TEST REPORT FCC 47 CFR PART 15 SUBPART C Test Standard FCC Part 15.209+ IC RSS-210 Issue 10 FCC ID KR5-420220826 IC 7812D-420220826 Product name Integrated Body Control Module Model No. 420220826 Trade name Continental Operation Freq. TX: 125 KHz, RX: 433.92MHz Test Result Pass Statements of Conformity Determination of compliance is based on the results of the compliance measurement, not taking into account measurement instrumentation uncertainty. The test Result was tested by Compliance Certification Services Inc. The test data, data evaluation, test procedures, and equipment configurations shown in this report were given in ANSI C63.10: 2013 and compliance standards. The test results of this report relate only to the tested sample (EUT) identified in this report. The test Report of full or partial shall not copy. Without written approval of SGS Compliance Certification Services Inc. (Wugu Laboratory) Approved by: Shawn Wu Supervisor This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Page 2 / 27 Report No.: TMWK2209003635KR Rev. 00 Revision History Rev. Issue Date Revisions Effect Page Revised By 00 January 4, 2023 Initial Issue ALL Allison Chen This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Page 3 / 27 Report No.: TMWK2209003635KR Rev. 00 Table of contents 1. GENERAL INFORMATION .................................................................................................. 4 1.1 EUT INFORMATION ............................................................................................................ 4 1.2 EUT CHANNEL INFORMATION .......................................................................................... 5 1.3 ANTENNA INFORMATION .................................................................................................. 5 1.4 MEASUREMENT UNCERTAINTY ....................................................................................... 6 1.5 FACILITIES AND TEST LOCATION .................................................................................... 7 1.6 INSTRUMENT CALIBRATION ............................................................................................. 8 1.7 SUPPORT AND EUT ACCESSORIES EQUIPMENT ........................................................... 9 1.8 TEST METHODOLOGY AND APPLIED STANDARDS ....................................................... 9 2. TEST SUMMARY ............................................................................................................... 10 3. DESCRIPTION OF TEST MODES ..................................................................................... 11 3.1 THE WORST MODE OF OPERATING CONDITION .......................................................... 11 3.2 THE WORST MODE OF MEASUREMENT ........................................................................ 11 3.3 FCC PART 15.205 RESTRICTED BANDS OF OPERATIONS .......................................... 12 4. TEST RESULT ................................................................................................................... 15 4.1 20DB BANDWIDTH ........................................................................................................... 15 4.2 TRANSMITTER RADIATED EMISSION ............................................................................ 17 4.3 AC POWER LINE CONDUCTED EMISSION ..................................................................... 26 4.4 ANTENNA REQUIREMENT ............................................................................................... 27 APPENDIX 1 – PHOTOGRAPHS OF EUT This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Page 4 / 27 Report No.: TMWK2209003635KR Rev. 00 1. GENERAL INFORMATION 1.1 EUT INFORMATION Applicant Continental Automotive Technologies GmbH Siemensstrasse 12 93055 Regensburg Germany Manufacturer Continental Automotive Technologies GmbH Siemensstrasse 12 93055 Regensburg Germany Factory (1) Continental Automotive Changchun Co., Ltd. Jingyue Branch 5800 Shengtai Street Changchun,130000 Jilin P.R. China (2) CONTINENTAL AUTOMOTIVE GUADALAJARA MEXICO S DE RL DE CV Camino a la Tijera No. 3 K.m. 3.5 Carretera Guadalajara Morelia. Colonia la Tijera 45640 Tlajomulco de Zúñiga Jalisco, MEXICO Equ…

Text truncated - open the document above for the full version.

This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Page A-1 / A-2 Report No.: TMWK2209003635KR Rev. 00 APPENDIX-A Test Photo Radiation (Below 1GHz) This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Page A-2 / A-2 Report No.: TMWK2209003635KR Rev. 00 Conducted