KR5CMKG2Body Control Module

CMKG2 User manual The CMKG2 (body controller module) is a component of a driving authorisation system of a car which further comprises of the car’s vehicle key, the UHF antenna module and (for some markets) the UWB antenna module. The components exchange encrypted data for car access, to start the engine and to locate the key. The vehicle key contains three buttons for car access. By pressing the dedicated button the vehicle key sends over RF authorization data to the control unit to open the doors. A 2 nd button releases data to lock the doors. A third button is dedicated to open the trunk deck. An additional “PANIC” button is implemented optional for the North American market. Moreover car access is also released after touching the door handles. The key is waken by the magnetic field (21.85 kHz) of the LF antennas, driven by the CMKG2. The vehicle key sends over RF (315 or 433 MHz, depending on frequency variant, as well as 7 GHz UWB for some markets) encrypted data in return for authentication. The CMKG2 receives this RF data from external antenna modules and unlocks the vehicle doors. In case the battery is low, car access is possible by means of an integrated mechanic emergency key. The vehicle key is then to be placed into a dedicated slot inside the centre console to be powered wireless by means of a magnetic field (also 21.85 kHz). This device is not freely available on the market and is installed only by trained specialized personnel from the car manufacturer. Continental Model: CMKG2 Product: Body Control Module FCC : KR5CMKG2 IC: 7812D-CMKG2 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)1) this device may not cause harmful interference, and (2) this device must accept interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. No changes shall be made to the equipment without the manufacturer’s permission as this may void the user’s authority to operate the equipment. This device complies with Industry Canada license-exempt RSS standard(s). OpOperation is subject to the following two conditions: (1)1) this device may not cause harmful interference, and (2) this device must accept interference received, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :(1)1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil d accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

Internal Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 02-20-2022 Ref: Attestation Statements Part 2.911(d)(7) Filing Continental Automotive Technologies GmbH (“the applicant”) certifies that, as of the date of the filing of the application, Continental Automotive Systems, Inc. is our designated U.S. agent for service of process for the FCC application. Continental Automotive Technologies GmbH accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Continental Automotive Systems, Inc. accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the FCC application. Sincerely, Designated Continental USA affiliated company Information: Name: Continental Automotive Systems, Inc. FRN: 0022069249 Contact Person: Mark Kenney Address: 1 Continental Dr, Auburn Hills, Michigan, USA 48326 Tel.: (248) 393-5300 Email: [email protected] U.S. Agent Signature: Applicant: Company Name: Continental Automotive Technologies GmbH Grantee Code: KR5 Contact Name: Thomas Heselberger Address: Siemensstrasse 12 93055 Regensburg Germany Tel.: 49-941-790-3554 Email: [email protected] Applicant Signature:

:sG,$ SGS North America lnc. 620 Old Peachtree Road SUITE 1OO Suwanee, Georgia 30024 United States oannot be signed by an authorized person Applicant Declaration Applicant Legal Business Name Continental Automotive,Technologies GmbH Address Siemensstrasse 12 93055 Regensburg Germany Grantee Code KR5 FCC ID KRsCMKG2 Authorized Cohtact Name Thomas Heslberger Contact Email Thomas.Heselberger@continental-corporation. com Contact Phone 49-941-790-3554 l, the undersigned, certify that I am an authorized signatory for the Applicânt and therefore declare; a) in accordance with 47CFR2.91 1(d), all of the statements herein and the exhibits attached hereto are true and conect to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labelingtheequipmentwiththeexactFCClDasspecifiedinthisappl¡cation, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the.equipment, appropr¡ate arrangements have been made with the manufacturer to ensure that product¡on units of this equipment will continue to comply with the FCC's technical requirements. d) in accordance with 47 CFR 2.909 and KD8394321, the Applicant has read, understood and agrees to accept that they are the responsible party and âgree to abide by their responsibilities as specifìed under 47 CFR 2.909 and KD8394321. e) in accordance with ISO 17065, FCC KD8641163, FCC KD8610077, KD8394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) theApplicantunderstands,acceptsandagreesthatasamplemayberequestedforsurveillancetesting. (2) the Applicant sÁa/l make provisions to always have a production sample available upon request by SGS, FCC and/or ISED.' (3) theApplicantsha/I,uponrequestbySGS,attheApplicant'sexpense,provideaproductionsampleoftherequestedproducttoSGs, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance.of products certifìed by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1 988, 21 U.S.C. $862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a "party" for these purposes. S) the Appticant has read, understood, accepts and agrees to abide by the SGS North America, lnc.(TCB) terms and conditions. Link to CFRs: httþs://wruvw.fcc.oov/wireless/bureau-divisionsitechnolooies-svstems-and-innovation-divísion/rules-reoulatìons-title-47 Link to KDBs: httos://aops Jcc.qov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.oc.caleic/site/smt-ost.nsf/enq/sfO1 130.html Link to the Covered List: Covered List X [Continental Automotive Technologies GmbH ("the applicant") certîfies that the equipment for which authorization is sought is not "coveredl equipment prohibitêd from receiving an equipment authorization pursuant to section 2.903 ofthe FCC rules. X [Continental Automotive Technologies GmbH 1"ttre applicant") certifies that, as of the date of the filing of the application, the applicant I is notl identified on the Covered list, established pursuant to $1.50002, as an entity producing "covered" equipment. Applicant Signature T. il',1- Date: q r"s, Zazt Print Name: Thomas Heselberger' Title: Head of Homologation QSF27-14-04 Rev 1.0 Rev. Feb 6,2023 a11 Page 1 of 1 Original lssue: Jan. 4,2021

Internal Date: December 1, 2022 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding FCC ID: KR5CMKG2 To whom it may concern: We, the undersigned, hereby authorize Kevin Tsai / Deputy Manager of SGS Compliance Certification Services Inc. to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Continental Automotive Technologies GmbH. This authorization is valid until further written notice from the applicant. Name: Thomas Heselberger Title: Head of Homologation Continental Automotive Technologies GmbH Phone: +49 941 790-3554 E-Mail: [email protected]

Internal Date: December 1, 2022 To: SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From: Continental Automotive Technologies GmbH Siemensstrasse 12 93055 Regensburg Germany Regarding: Confidentiality Request regarding application for FCC ID: KR5CMKG2 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential until the device is marketed or 180 days from the grant date, whichever is less. If the device is marketed within 180 days of the Grant Date, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. External Photos Internal Photos Test Setup Photos User manual(s) Sincerely, Name: Thomas Heselberger Title: Head of Homologation Continental Automotive Technologies GmbH Phone: +49 941 790-3554 E-Mail: [email protected]

This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Page: 1 / 9 Report No.: TM-2211000293P Rev.: 01 APPENDIX 1 - PHOTOGRAPHS OF EUT EXTERNAL PHOTOGRAPHS OF EUT This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Page: 2 / 9 Report No.: TM-2211000293P Rev.: 01 This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Page: 3 / 9 Report No.: TM-2211000293P Rev.: 01 This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Page: 4 / 9 Report No.: TM-2211000293P Rev.: 01 This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Page: 5 / 9 Report No.: TM-2211000293P Rev.: 01 Antenna Continental / A223 905 22 00 Continental / A205 905 3005 This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Page: 6 / 9 Report No.: TM-2211000293P Rev.: 01 Continental / A206 905 25 04

CMKG2 Continental FCC: KR5CMKG2 IC: 7812D-CMKG2 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Page: 7 / 9 Report No.: TM-2211000293P Rev.: 01 INTERNAL PHOTOGRAPHS OF EUT This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Page: 8 / 9 Report No.: TM-2211000293P Rev.: 01 This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Page: 9 / 9 Report No.: TM-2211000293P Rev.: 01 Module & Crystal (MAXIM / MAX2143PGGH; A2C02889100)

PN: Body Control Module MN:CMKG2 Brand: Continental FCC: KR5CMKG2 IC: 7812D-CMKG2 Antenna info: Antenna Photos with dimensions:

Project No: TM-2211000293P FCC ID: KR5CMKG2 Page: 1 / 9 Report No.: TMWK2211004639KS Rev.: 02 No.11, Wugong 6th Rd., Wugu Dist., New Taipei City , Taiwan /新北市五股區五工六路11號 t:(886-2) 2299-9720 f:(886-2) 2299-9721 www.sgs.com.tw Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of client’s instruction, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Compliance Certification Services Inc. 程智科技股份有限公司 Member of the SGS Group RF EXPOSURE REPORT 47 CFR Part 2.1093 For Body Control Module Model: CMKG2 Trade Name: Continental Issued to Continental Automotive Technologies GmbH Siemensstrasse 12, 93055 Regensburg, Germany Issued by Compliance Certification Services Inc. Wugu Laboratory No.11, Wugong 6th Rd., Wugu Dist., New Taipei City, Taiwan. Issued Date: March 2, 2023 This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Page: 2 / 9 Report No.: TMWK2211004639KS Rev.: 02 Revision History Rev. Issue Date Revisions Effect Page Revised By 00 January 11, 2023 Initial Issue ALL Doris Chu 01 February 1, 2023 See the following Note Rev. (01) P.4 Doris Chu 02 March 2, 2023 See the following Note Rev. (02) P.6 Doris Chu Rev. (01) 1. Added standard KDB 447498 D04 v01. Rev. (02) 1. Modify equipment list in section 3. This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Page: 3 / 9 Report No.: TMWK2211004639KS Rev.: 02 TABLE OF CONTENTS 1. TEST RESULT CERTIFICATION ......................................................................... 4 2. EUT SPECIFICATION .......................................................................................... 5 3. MEASUREMENT EQUIPMENT USED ................................................................. 6 4. MAXIMUM PERMISSIBLE EXPOSURE............................................................... 8 5. TEST RESULTS ................................................................................................... 9 6. PHOTOGRAPHS OF TEST SETUP ................................................................. A-1 This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Page: 4 / 9 Report No.: TMWK2211004639KS Rev.: 02 1. TEST RESULT CERTIFICATION APPLICABLE STANDARDS STANDARD TEST RESULT KDB 447498 D04 v01 47 CFR Part 2.1093 Compliance Statements of Conformity Determination of compliance is based on the results of the compliance measurement, not taking into account measurement instrumentation uncertainty. Approved by: Sky Zhou Asst. Section Manager Compliance Certification Services Inc. This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Page: 5 / 9 Report No.: TMWK2211004639KS Rev.: 02 2. EUT SPECIFICATION EUT Body Control Module Model CMKG2 Trade Name Continental Model Discrepancy N/A Frequency band (Operating) 21.85 KHz Others Device category Portable (<20cm separation) Mobile (>20cm separation) Others Exposure classification Occupational/Controlled exposure General Population/Uncontrolled exposure (E=83 V/m, H=90 A/m) Antenna Specification Antenna Type Model Band Max Gain Rear antenna Standard Keyless antenna A205 905 3005 Continental N/A Transponder antenna Transponder antenna A223 905 22 00 Continental N/A Side antenna right Long Range antenna A206 905 25 04 Continental N/A Side antenna left Long Range antenna A206 905 25 04 Continental N/A Evaluation applied MPE Evaluation* Maximum Permissible Evaluation SAR Evaluation N/A Received Date November 23, 2022 Date of Test December 15 ~ 21, 2022 EUT Serial number (A3) Serial No: 400015044063803212012201 Remark: 1. For more details, please refer to the User’s manual of the EUT. 2. Disclaimer: Antenna information is provided by the applicant, test results of this report are applicable to the sample EUT received. This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Page: 6 / 9 Report No.: TMWK2211004639KS Rev.: 02 3. MEASUREMENT EQUIPMENT USED The lab has been recognized by Innovation, Science and Economic Development Canada to test to Canadian radio equipment requirements, the CAB identifier: TW1309 Equipment Used for Emissions Measurement RF Conducted Test Site Equipment Manufacturer Model S/N Cal Date Cal Due DC Power Source GWINSTEK SPS-3610 GPE880163 12/02/2022 12/01/2023 Antenna NARDA EHP-200AC 180ZX11018 03/10/2022 03/09/2023 Software EHP200-TS MEASUREMENT UNCERTAINTY Parameter Frequency Expanded Uncertainty (dB) k Electric Field Strength 9KHz ~300KHz ± 16.14 % 2 300KHz ~10MHz ± 17.91 % 2 Magnetic Field Strength 9KHz ~300KHz ± 17.92 % 2 300KHz ~10MHz ± 17.58 % 2 This document cannot be reproduced except in full, without prior written ap…

Text truncated - open the document above for the full version.

Project No.: TM-2211000293P Page 1 / 27 Report No.: TMWK2211004638KR Rev. 01 No.11, Wugong 6th Rd., Wugu Dist., New Taipei City , Taiwan /新北市五股區五工六路11號 t:(886-2) 2299-9720 f:(886-2) 2299-9721 www.sgs.com.tw Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of client’s instruction, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Compliance Certification Services Inc. 程智科技股份有限公司 Member of the SGS Group FCC RADIO TEST REPORT FCC 47 CFR PART 15 SUBPART C Test Standard FCC Part 15.209+ IC RSS-210 Issue 10 FCC ID KR5CMKG2 IC 7812D-CMKG2 Product name Body Control Module Model No. CMKG2 Trade name Continental Operation Freq. TX: 21.85 KHz Test Result Pass Statements of Conformity Determination of compliance is based on the results of the compliance measurement, not taking into account measurement instrumentation uncertainty. The test Result was tested by Compliance Certification Services Inc. The test data, data evaluation, test procedures, and equipment configurations shown in this report were given in ANSI C63.10: 2013 and compliance standards. The test results of this report relate only to the tested sample (EUT) identified in this report. The test Report of full or partial shall not copy. Without written approval of SGS Compliance Certification Services Inc. (Wugu Laboratory) Approved by: Shawn Wu Supervisor This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Page 2 / 27 Report No.: TMWK2211004638KR Rev. 01 Revision History Rev. Issue Date Revisions Effect Page Revised By 00 January 11, 2023 Initial Issue ALL Doris Chu 01 February 1, 2023 See the following Note Rev. (01) P.23, P.15 Doris Chu Rev. (01) 1. Modify 9 kHz – 30MHz Antenna Pol. to Horizontal in section 4.2. 2. Modify Test Procedure in section 4.1. This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Page 3 / 27 Report No.: TMWK2211004638KR Rev. 01 Table of contents 1. GENERAL INFORMATION ............................................................................................. 4 1.1 EUT INFORMATION ....................................................................................................... 4 1.2 EUT CHANNEL INFORMATION ..................................................................................... 5 1.3 ANTENNA INFORMATION ............................................................................................. 5 1.4 MEASUREMENT UNCERTAINTY................................................................................... 6 1.5 FACILITIES AND TEST LOCATION ............................................................................... 7 1.6 INSTRUMENT CALIBRATION ........................................................................................ 8 1.7 SUPPORT AND EUT ACCESSORIES EQUIPMENT ...................................................... 9 1.8 TEST METHODOLOGY AND APPLIED STANDARDS .................................................. 9 2. TEST SUMMARY .......................................................................................................... 10 3. DESCRIPTION OF TEST MODES ................................................................................ 11 3.1 THE WORST MODE OF OPERATING CONDITION ..................................................... 11 3.2 THE WORST MODE OF MEASUREMENT ................................................................... 11 3.3 FCC PART 15.205 & RSS GEN SECTION 8.10 RESTRICTED BANDS OF OPERATIONS .................................................................... 12 4. TEST RESULT .............................................................................................................. 15 4.1 20DB BANDWIDTH & 99%OBW .................................................................................. 15 4.2 TRANSMITTER RADIATED EMISSION ........................................................................ 17 4.3 AC POWER LINE CONDUCTED EMISSION ................................................................ 26 4.4 ANTENNA REQUIREMENT .......................................................................................... 27 APPENDIX 1 – PHOTOGRAPHS OF EUT This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Page 4 / 27 Report No.: TMWK2211004638KR Rev. 01 1. GENERAL INFORMATION 1.1 EUT INFORMATION Applicant Continental Automotive Technologies GmbH Siemensstrasse 12, 93055 Regensburg, Germany Manufacturer Continental Automotive Technologies GmbH Siemensstrasse 12, 93055 Regensburg, Germany Factory Continental Automotive Technologies GmbH Siemensstrasse 12 D-93055 Regensburg Germany Equipment Body Control Module Model Name CMKG2 Model Discrepancy N/A Received Date November 23, 2022 Date of Test …

Text truncated - open the document above for the full version.

This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Page: A-1 / A-3 Report No.: TMWK2211004639KS Rev.: 01 6. PHOTOGRAPHS OF TEST SETUP 4.5cm Front Back This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Page: A-2 / A-3 Report No.: TMWK2211004639KS Rev.: 01 Left Right This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Page: A-3 / A-3 Report No.: TMWK2211004639KS Rev.: 01 Top Bottom

This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Page A-1 / A-2 Report No.: TMWK2211004638KR Rev. 01 APPENDIX-A Test Photo Radiation (9 kHz – 30MHz) Radiation (Below 1GHz) This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Page A-2 / A-2 Report No.: TMWK2211004638KR Rev. 01 Conducted