KR5SV2007BSD24 GHz Blind-Spot Radar Sensor

Filename: Exhibit_8_User_Manual.doc Issue status: 0.1 Document maturity: draft Department: SV SC RS DA page 1 of 34 Copyright    by Siemens AG 2006 All rights reserved
Exhibit 8 – User Manual SV SC RS DA



Draft User Manual for 24 GHz Blind-Spot Radar Sensor AUTHORS Name Organisation Section Dr. Martin Kunert SV SC RS DA External Affairs

Remark:
This
endcustomer
user
manual
is
a
draft
version
still
under
construction.
It
is
written
in
Japanese
language
because
the
endcustomer
(car
manufacturer)
is
headquartered
in
Japan.

The
frequency
approval
relevant
information
can
be
found
on
page
7
and
8
(with
English
translation).
BSM
    No.
TD74
67
Y30
2/34 Customer SHT
Filename: Exhibit_8_User_Manual.doc Issue status: 0.1 Document maturity: draft Department: SV SC RS DA page 2 of 34 Copyright    by Siemens AG 2006 All rights reserved D r a f t



























‘06.04.11

APPROVED




TD74 67 Y30 CHECKED
B/S/M    



MODULE
B/S/M
DESIGNED


 
 
5AEZC6-001 RESTRICTED RESTRICTEDRESTRICTED RESTRICTED DD DDDD DD B/S/M モジュール詳細仕様書 モジュール詳細仕様書モジュール詳細仕様書 モジュール詳細仕様書 B/S/M
Module
Detailed
Specifications
   !"# $%& '( )* +,  - . / 01 NEW Version Ver. 1.0 2 3 1 456478 9 :;<==> ?@AB ‘06.08.30 Ver. 2.0 2 3 2 Spec change for J50c8 ’06.10.18
Ver.3.0 2 3 - . - . BSM C DE F G HIJKL No.
TD74
67
Y30
3/34 Customer SHT
Filename: Exhibit_8_User_Manual.doc Issue status: 0.1 Document maturity: draft Department: SV SC RS DA page 3 of 34 Copyright    by Siemens AG 2006 All rights reserved D r a f t DWG.
DATE
QUALITY
MN OP
TYPE


’06.04.11
AR,B
WORD


( Q ) RS TU VWX YZ [ S [ \]^ _ ` ( ab cd e b fg h_ `i j [k _ ` l ^ mnop q \ rs t \ uv Vwx y Vz { |} ~] € o  k _ ` l \ ‚ƒ s t \ uv Vwx y Vz { |} BSM „ …† ‡ ˆ ‰Š‹Œ No.
TD74
67
Y30
2/34 Customer SHT
Filename: Exhibit_8_User_Manual.doc Issue status: 0.1 Document maturity: draft Department: SV SC RS DA page 2 of 34 Copyright    by Siemens AG 2006 All rights reserved D r a f t Revision
History:

Ž  ‘’ “ ”• “ ”– — ˜ ™ – — ˜š › š – œž Ÿ ¡ ¢ £¤ ¥ ¦ £ § ̈©£ ª « ¬­ ª « ª® ̄°± ²³ ® ́μ ª¶· ̧¹ ¬­ º » ¼ ½ ¾¿ ÀÁÀÁ ÃÄÅ ÆÇ ¿ ÁÈ É ÊË ÄÅÌÍ ÎÏ ¿ÐÑÒ Ó ¿ Á Ô ÕÖ ×ØÙ Ú ÐÑÒ Ó ÈÀ ¿Û Ü Ý ×ØÙ Ú Å Þß àá ÈÀ Ô ÕÖâãä åæ Å çèé êë Ð Ñ ÁÀ ¿ìí îï îî îð îñ ¿ ÀÁÀ ¿ ×ØÙ Ú òóôõÎÏ¿ ÀÁÀ ö ×ØÙ Ú ÷øùúûüýÎ ¿ ÀÈ èçþøèç ÐÑÒ Ó ¿ ÀÈÀÁ Ô ÕÖ×ØÙ Ú Åÿ É ÊË ÄÅÌ ÎÏ
  ÐÑÒ Ó î  î  ¿ À ¿ Ô ÕÖ å ã å  å ¿ À ¿ ÀÁ Ô ÕÖ å ã å  å
  çè ÐÑÒ Ó î  ¿ À ö ×ØÙ Ú ôõ ÐÑÒ Ó ¿ À ö ÀÁ ×ØÙ Ú Å òó î ¿ À ö ÀÈ ôõ ¿ À  òó å  ¿ À  ÀÁ òó å ë  Å     !"#$%&' ()  *+,- ./0 1 23 $%&' ( )  4567 89: ;<=>; &' ( )  ?@ ABC >DEF - ðï  GH EI J F KL 9 ;< / MN OP QRST U &' ðîV WX YZ[\]^ _` ] _ab cd ce f g h i j k l 1 1 0 0 0 0 0 1 0 1 1 1 1 0 0 0 1 0 0 0 1 0 1 0 0 1.Ver.2 mn / Add Ver.2 2. Ver.3 mn / Add Ver.3 1. o p qrs t u / Change state flow 2. LH&RH BSM failure status mv 2. s w xyz{ /Change the figure. 1. | }~ € } ‚ ƒ „ …†‡ mn /Add sentence for the hysterisis ˆ ‰ …†Š‹ Œ Correct
the
senteces Ž ‘’“” • –—˜ ™š /
BSM
ON ™› ’“ 1.BSM œ žŸ ¡¢ £ ¤ ¥ ¦ / Blink specification for the BSM icon is changed. 1. § ̈©ª « ̈¬ ­ ® ̄ °±² ³ ́ /Add sentence for the hysterisis 2.Tilt μ ¥ ¦¶ Change tilt angle 1.BSM · ̧¹ Ÿº  Ÿ»¼ ̧½ ¡¾ £ ¤ ¥ ¦ / Spec. for the BSM lamp is 2.BSM · ̧¹ Ÿº  Ÿ»¼ ̧½ ¡¢¿À ³Á /
Frequency
for
BSM
lamp
is
1. Âà ž ̧Ä Å ÆÇ /Delete DTC table 1. ÈÉÊ °Ë ÌÍ / Called document is corrected. 1.Ver.2 ³ ́ / Add Ver.2 2. Ver.3 ³ ́ / Add Ver.3 BSM Î ÏÐ Ñ Ò ÓÔÕÖ× No.
TD74
67
Y30
3/34 Customer SHT
Filename: Exhibit_8_User_Manual.doc Issue status: 0.1 Document maturity: draft Department: SV SC RS DA page 3 of 34 Copyright    by Siemens AG 2006 All rights reserved D r a f t ØÙÚ ÛÜ
Contents
list

Ý ÝÝ Ý Ý ÝÝ ÝÞ ÞÞ Þ ßàß
á âã äåæ çè
ßàé
BSM êë ã ì í îï
ßàð
ñò
é
BSM
êë ã ì íó ô õö ÷ø ïùú û
éàß
ô õö ÷
éàé
ö ÷ü ó ïùú û
éàð
ý þÿ
 ó    ð
ïùú û
ðàß
BSM
 ïùú û
ðàßà ß
 ü ó
ðàßà é
ü ó  ØÙ
ðàßà ð

   ØÙ
ðàßà 

    ØÙ
ðàé
õ ôïùú û
ðàéà ß
BSM
 ó ü ó  ØÙ ! " # ïùú û
ðàð
BSM $ ì % å &' ( å ë ) ì* ïùú û
ðàðà ß
BSM $ ì % å & ( å ë ) ì*ì +,ô õ ïùú û
ðà

  ïùú û
ðàà ß

 ó -.
ðàà é
/0 
ðà 1
2 ì á Ü3 4 å 5 2 ì á ø +,678
ðà 1 à ß
2 ì á ø 9 ó -.67
BSM : ;< = > ?@ABC No.
TD74
67
Y30
4/34 Customer SHT
Filename: Exhibit_8_User_Manual.doc Issue status: 0.1 Document maturity: draft Department: SV SC RS DA page 4 of 34 Copyright    by Siemens AG 2006 All rights reserved D r a f t DEF
CAN G HI JK L
DEFE M
NOP QRS T UV G HI JK L
DEFE W
X YZ [\] ^_` a ^ I JK L
DEFE D
bc d e fg ah eije P
DEFE k
l im n j op \] ^_ R qr
DE s
BSM tu v I JK L
w x 1
EOL
Test Setup






BSM y z{ | } ~€‚ No.
TD74
67
Y30
5/34 Customer SHT
Filename: Exhibit_8_User_Manual.doc Issue status: 0.1 Document maturity: draft Department: SV SC RS DA page 5 of 34 Copyright    by Siemens AG 2006 All rights reserved D r a f t
ƒ„ … † ƒ„ … † ƒ„ … † ƒ„ … † Disclaimer ‡ˆ ‰ Š‹Œ Ž ‘’ “” •–— ˜™ š› ˆ œ žŸ ¡ ¢£ ›¤ ˜¥ ¦§ ̈ ©’ “ …ª ˆ« ‡ˆ ‰ Š‹Œ Ž ‘’ “” •–— ˜™ š› ˆ œ žŸ ¡ ¢£ ›¤ ˜¥ ¦§ ̈ ©’ “ …ª ˆ«‡ˆ ‰ Š‹Œ Ž ‘’ “” •–— ˜™ š› ˆ œ žŸ ¡ ¢£ ›¤ ˜¥ ¦§ ̈ ©’ “ …ª ˆ« ‡ˆ ‰ Š‹Œ Ž ‘’ “” •–— ˜™ š› ˆ œ žŸ ¡ ¢£ ›¤ ˜¥ ¦§ ̈ ©’ “ …ª ˆ« ¬ ­® ̄ ° –— ˜¥ œ ± ˆ Ž ‘² ³ ¤ ́ ’ “ μ¶ · ̧ ¹º ² » ¹¼ ́ ® ½ –¤ ¥ ¬ ­® ̄ ° –— ˜¥ œ ± ˆ Ž ‘² ³ ¤ ́ ’ “ μ¶ · ̧ ¹º ² » ¹¼ ́ ® ½ –¤ ¥ ¬ ­® ̄ ° –— ˜¥ œ ± ˆ Ž ‘² ³ ¤ ́ ’ “ μ¶ · ̧ ¹º ² » ¹¼ ́ ® ½ –¤ ¥ ¬ ­® ̄ ° –— ˜¥ œ ± ˆ Ž ‘² ³ ¤ ́ ’ “ μ¶ · ̧ ¹º ² » ¹¼ ́ ® ½ –¤ ¥ This
user
manual
contains
the
technical
state
of
the
art
when
passing
for
press.
Subject
to
change
without
prior
notice.
Please
refer
to
the
equipment
supplier
for
updated
manuals.


¾ ¿À Á ¾ ¿À Á ¾ ¿À Á ¾ ¿À Á Radiation Hazard ‡ˆ ‡ˆ‡ˆ ‡ˆ BSM Ã Ä ÅÆÇÈ É ÊËÌ Í ÎÏÐ Ç ÑÒ ÓÔÕ Ö× Ø ÙÚÛ ÜÝ × Þ ÙÚÛ ßàá â ã ä å Ã Ä ÅÆÇÈ É ÊËÌ Í ÎÏÐ Ç ÑÒ ÓÔÕ Ö× Ø ÙÚÛ ÜÝ × Þ ÙÚÛ ßàá â ã ä å …

Text truncated - open the document above for the full version.

Siemens Aktiengesellschaft: Chairman of the Supervisory Board: Heinrich v. Pierer; Managing Board: Klaus Kleinfeld, Chairman, President and Chief Executive Officer; Johannes Feldmayer, Joe Kaeser, Rudi Lamprecht, Eduardo Montes, Jürgen Radomski, Erich R. Reinhardt, Hermann Requardt, Uriel J. Sharef, Klaus Wucherer Registered offices: Berlin and Munich, Commercial registries: Berlin Charlottenburg, HRB 12300, Munich, HRB 6684 WEEE-Reg.-Nr. DE 23691322 Page 1 of 1 Power of Attorney The company CETECOM GmbH, Im Teelbruch 116, D-45219 Essen is authorized by Siemens AG, Siemens VDO Automotive, Siemensstraße 12, D-93055 Regensburg, to act as an agent in all matters relating to applications for equipment authorization at FCC regarding the Siemens VDO 24 GHz wideband radar sensor. This includes submission and signing of all documents relating to these matters. It is further certified that the applicant nor any party to the application is subject to a denial of federal benefits, that includes benefits, pursuant to section 5301 of the Anti-Drug Abuse Act of 1998, 21 U.S.C. Section 862. This appointment is valid for 6 month, starting with the date of this authorization, provided however, that Siemens VDO may revoke this authorization and appointment at any time prior to the expiration of the six month period upon written notice to CETECOM GmbH and to the FCC authority. Sincerely On behalf of Siemens AG, Siemens VDO Automotive Dr. Martin Kunert Siemens AG, SV C SC DA, P.O.Box 10 09 43, 93055 Regensburg Name Martin Kunert Department SV C SC DA Telephone +49 941-790 3004 Fax +49 941-790 133004 Mobile +49 171 9722405 E-mail [email protected] Internet www.siemensvdo.com Your letter of Our reference Exhibit 2 Date Nov 17, 2006 Siemens AG Division: Safety and Chassis, Head: Dr. J. Goetz Group: Siemens VDO Automotive Group Executive Management: Wolfgang Dehen, Group President Reinhard Pinzer, Dr. Klaus Egger, Helmut Matschi Postal address: Siemens AG P.O.Box 10 09 43 93055 Regensburg Office address: Siemensstrasse 12 93055 Regensburg Tel: +49 941-790 3004

Siemens AG Siemens VDO Automotive SV SC RS DA Dr. Martin Kunert Siemensstrasse 12 93055 Regensburg Germany Subject: Request for Confidentiality FCC ID: KR5SV2007BSD To Whom It May Concern: In accordance with §0.459 of CFR 47, Siemens AG, Siemens VDO Automotive requests confidentiality for the following items 1. Block Diagram (Exhibit 4) 2. Schematic Diagram (Exhibit 5) 3. Part List /Tune up information (Exhibit 10) 4. Operational Description (Exhibit12). These items contain detailed system and equipment description and related information about the product which Siemens AG, Siemens VDO Automotive considers to be proprietary, confidential and a custom design which otherwise would not be released to the general public. Since this design is a basis from which future technological products will evolve, Siemens AG, Siemens VDO Automotive also feels that this information would be of benefit to its competitors, and that the disclosure of the information in these exhibits would give our competitors an unfair advantage in the market. If there are any questions regarding this request, please contact me at the above address or call +49 941 790 3004 or e-mail [email protected]. Sincerely On behalf of Siemens AG, Siemens VDO Automotive Dr. Martin Kunert

Siemens AG Siemens VDO Automotive SV SC RS DA Dr. Martin Kunert Siemensstrasse 12 93055 Regensburg Germany Subject: Request for Short Term Confidentiality FCC ID: KR5SV2007BSD To Whom It May Concern: pursuant to the recent upgrade to the Office of Engineering and Technology’s (OET) Equipment Authorization System on 6/15/04 (ref. DA 04 –1705), Siemens AG, Siemens VDO Automotive requests temporarily confidentiality for the following items: 1. External Photographs (Exhibit 3) 2. Internal Photographs (Exhibit 9) 3. Test set up (Exhibit 7) 4. User Manual (Exhibit 8). We request this short term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device, which is planned for August 2007. If there are any questions regarding this request, please contact me at the above address or call +49 941 790 3004 or e-mail [email protected]. Sincerely On behalf of Siemens AG, Siemens VDO Automotive Dr. Martin Kunert

© Siemens VDO Automotive AG 2006 1 Exhibit 3 – External PhotographsDUT dimensions Length: 140 mm (without connector flange and faste ning eye) Width: 80 mm (without fastening eyes) Height: 32 mm l e n g t h w i d t h height © Siemens VDO Automotive AG 2006 2 Exhibit 3 – External PhotographsDUT front view © Siemens VDO Automotive AG 2006 3 Exhibit 3 – External PhotographsDUT back view © Siemens VDO Automotive AG 2006 4 Exhibit 3 – External PhotographsDUT top view with horizontal beamshapes TILT TILT beam beam (40 (40 ° ° horizontal horizontal beam beam width width ) ) BROAD beam BROAD beam (160 (160 ° ° horizontal beam width) horizontal beam width) 33 ° BORESIGHT DIRECTION © Siemens VDO Automotive AG 2006 5 Exhibit 3 – External PhotographsDUT side view with vertical beamshapes TILT TILT beam beam (40 (40 ° ° vertical vertical beam beam width width ) ) BROAD beam BROAD beam (30 (30 ° ° vertical beam width) vertical beam width) BORESIGHT DIRECTION © Siemens VDO Automotive AG 2006 6 Exhibit 3 – External PhotographsDUT with harness

Exhibit 1 – ID label and location info SV SC RS DA Filename: Exhibit_1_ID_Label_Location.doc Issue status: 0.1 Document maturity: draft Department: SV SC RS DA page 1 of 3 Copyright   by Siemens AG 2006 All rights reserved Exhibit 1 – ID label and location info SV SC RS DA Filename: Exhibit_1_ID_Label_Location.doc Issue status: 0.1 Document maturity: draft Department: SV SC RS DA page 2 of 3 Copyright   by Siemens AG 2006 All rights reserved Customer Part Number Siemens VDO MLFB Siemens VDO serial number FCC ID Customer Sign Exhibit 1 – ID label and location info SV SC RS DA Filename: Exhibit_1_ID_Label_Location.doc Issue status: 0.1 Document maturity: draft Department: SV SC RS DA page 3 of 3 Copyright   by Siemens AG 2006 All rights reserved The product label is a permanent adhesive fixed on the rear sensor housing as shown in the above drawi ng. The label is designed to last the expected lifetime of the radar device in the environment in which the equipment i s operated and is not readily detachable. In a later stage of very high mass production direc t laser labeling on the rear housing surface may be used as a further option. The frequency authorization related label design is shown in the picture beside. The rest of the label space is used for product specific information and commercial logos.

© Siemens VDO Automotive AG 2006 1 Connector Metal housing Gasket LF-board RF-board Tunerbox Board to board connector Plastic cover HF sealing Screw Exhibit 9 – Internal PhotographsDUT assembly overview © Siemens VDO Automotive AG 2006 2 Exhibit 9 – Internal PhotographsDUT Metal Housing, LF board and HF sealing Sensor connectorwith fixing screws Inlay RF sealing(EMI-tec Inc., CC-seal:G69-23-XXXX-CC09) LF boardfixing screws Aluminium housing LF board(component side) © Siemens VDO Automotive AG 2006 3 Exhibit 9 – Internal PhotographsDUT LF and RF board before assembly LF board (rear) in aluminium housingwith RF sealing Board – to – board connector RF board (rear) with tunerbox © Siemens VDO Automotive AG 2006 4 Exhibit 9 – Internal PhotographsDUT RF board after assembly RF board (antenna side) after assemblyin aluminium housing Plastic cover (front) TILT beam Transmit TILT beam Receive Broad beam Receive (2x)Broad beam Transmit © Siemens VDO Automotive AG 2006 5 Exhibit 9 – Internal PhotographsDUT RF board and plastic cover rear view RF board (component side) withouttunerbox Plastic cover (rear) © Siemens VDO Automotive AG 2006 6 Exhibit 9 – Internal PhotographsDUT LF board and tunerbox rear view LF board (front) Tunerbox (rear) © Siemens VDO Automotive AG 2006 7 Exhibit 9 – Internal PhotographsDUT – all apart © Siemens VDO Automotive AG 2006 8 Exhibit 9 – Internal PhotographsDUT – final assembly cross section Horizontal polarization for both beams

Exhibit 11 – RF exposure (MPE) SV SC RS DA
Filename:
Exhibit_11_RF_Exposure.doc
Issue
status:
0.1
Document
maturity:
draft
Department:
SV
SC
RS
DA
page
1 of 1
Copyright
  
by
Siemens
AG
2006
All
rights
reserved




Prediction of Maximum Permissible Exposure (MPE) limit at given distance Equation
from
page
18
of
OET
Bulletin
65,
Edition
97101





where:




S
=
power
density


P
=
power
input
to
the
antenna


G
=
power
gain
of
the
antenna
in
the
direction
of
interest







relative
to
an
isotropic
radiator


R
=
distance
to
the
center
of
radiation
of
the
antenna

The
table
below
is
an
excerpted
from
Table
1B
of
47
CFR
1.1310
titled
Limits
for
Maximum
Permissible
Exposure
(MPE),
Limits
for
General
Population/Uncontrolled
Exposure:


Frequency Range (MHz) Power Density (mW/cm 2 ) Averaging Time (minutes) 300
–
1500
f/1500
30
1500
–
100.000
1.0
30


Health Hazard EM Radiation Level of the EUT The
highest
peak
power
density
of
the
EUT
recorded
with
a
1
MHz
RBW
is
135.0
dBm
for
the
TILT
beam
(c.f.
plot
2
on
page
20
in
the
test
report/Exhibit
6).
With
the
603
MHz
UWB
bandwidth
of
the
device
(c.f.
2
on
page
20
in
the
test
report/Exhibit
6)
the
maximum
EIRP
over
the
whole
bandwidth
can
be
computed
as:

EIRP max
=
EIRP
(dBm)
+
10
log10(BW/1MHz)
=
135
dBm
+
27,8
dB
=
17.2
dBm
=
190,5
CW
Thus,
the
maximum
power
density
at
a
distance
of
20
cm
is
computed
as:

S(mW/cm 2 )
=
0.1905
mW
/
(4π
(20cm) 2 )
=
37 nW/cm 2


This
value
of
37
nW/cm 2
is
fare
below
the
MPE
limit
of
1
mW/cm 2 .
2 4R PG S π =

CETECOM ICT Services GmbH Radio Satellite Communication Untertürkheimer Straße 6–10, D-66117 Saarbrücken, Telephone +49 (0) 681 598 - 0, Fax +49 (0) 681 598 – 9075 Test report No.: 2-4488-01-02/06 This test report consists of 49 pages Page 1 of 49 Recognized by the Federal Communications Commission and Industry Canada Anechoic chamber registration No.: 90462 (FCC) Anechoic chamber registration No.: 3463A-1 (IC) TCB ID: DE0001 Accredited by the German Accreditation Council DAR–Registration Number DAT–P-176/94-D1 Independent ETSI compliance test house ETSI Test report No.: 2-4488-01-02/06 Applicant : Siemens AG, Siemens VDO Automotive Type : SVDO-BSD Test standards : FCC Part 15.252 (08/2006) FCC ID : KR5SV2007BSD IC ID : CETECOM ICT Services GmbH Test report No.: 2-4488-01-02/06 Date: 2006-11-20Page 2 of 49 Table of contents 1 General information_____________________________________________________________3 1.1 Notes ____________________________________________________________________________3 1.2 Testing laboratory _________________________________________________________________4 1.3 Details of applicant ________________________________________________________________4 1.4 Application details _________________________________________________________________4 1.5 Test item (EUT) ___________________________________________________________________5 1.6 Technical data ____________________________________________________________________5 1.6.1 Operation conditions____________________________________________________________________ 5 1.6.2 Equipment under test ___________________________________________________________________ 5 1.6.3 Test Report Cover Sheet / Performance Test Data _____________________________________________ 6 1.7 Test standards ____________________________________________________________________7 2 Technical test __________________________________________________________________8 2.1 Summary of test results _____________________________________________________________8 2.2 Test environment __________________________________________________________________8 2.3 Measurement and test set-up ________________________________________________________8 2.4 Test equipment utilized and test set-up ________________________________________________9 2.4.1 Test set-up for the measurement in the frequency range 12 GHz to 26 GHz _________________________ 9 2.4.2 Test set-up for the measurement in the frequency range 26 GHz to 110 GHz _______________________ 10 2.4.3 Test set-up for the measurement in the frequency range up to 12 GHz ____________________________ 11 2.5 Test results ______________________________________________________________________12 2.5.1 Summary list of all performed test cases ___________________________________________________ 12 2.5.2 Remarks on methods of measurements_____________________________________________________ 13 2.5.3 Test results in details___________________________________________________________________ 14 3 Plots, graphs and data sheets _____________________________________________________19 4 Photographs __________________________________________________________________40 4.1 Photographs of the test set-up __________________________________________________40 4.2 Photographs of the EUT _______________________________________________________47 CETECOM ICT Services GmbH Test report No.: 2-4488-01-02/06 Date: 2006-11-20Page 3 of 49 1 General information 1.1 Notes The test results of this test report relate exclusively to the test item specified in 1.5. CETECOM ICT Services GmbH does not assume responsibility for any conclusions and generalizations drawn from the test results with regard to other specimens or samples of the type of the equipment represented by the test. The test report may only be reproduced or published in full. Reproduction or publication of extracts from the report requires the prior written approval of the CETECOM ICT Services GmbH. Tester: Date Name Signature 2006-11-20 Manfred Paschwitz Technical responsibility for area of testing: Date Name Signature 2006-11-20 Harro Ames CETECOM ICT Services GmbH Test report No.: 2-4488-01-02/06 Date: 2006-11-20Page 4 of 49 1.2 Testing laboratory CETECOM ICT Services GmbH CETECOM ICT Services GmbH Untertürkheimerstraße 6–10 P.O. Box 65 01 55 D-66117 Saarbrücken D-66140 Saarbrücken Germany Germany Telephone : + 49 (0) 681 598–0 Fax : + 49 (0) 681 598–9075 e-mail : [email protected] Internet : http://www.cetecom-ict.de Accredited testing laboratory Accredited by : DA Tech Listed by : Federal Communications Commission (FCC) Industry Canada (IC) Authority Identification/Registration No. RegTP DAT-P-176/94-D1 FCC 90462 IC 3463A-1 Testing location, if different from CETECOM ICT Services GmbH: (Not applicable) 1.3 Details of applicant Name : SIEMENS AG SIEMENS VDO Automotive P.O. Box : 10 09 43 Town : 93055 Regensburg Country : Germany Telephone : +49(0) 941 790 0 Fax : +49(0) 941 790 133004 Contact person Name : Dr. Ing. Martin Kunert Telephone : +49(0) 941 790 3004 Fax : +49(0) 941 790 133004 e-mail : [email protected] 1.4 Application details Date of receipt of application : 2006-10-19 Date of receipt of test item : 2006-10-23 Date of test : 2006-10-23 to 2006-11-10 CETECOM ICT Services GmbH Test report No.: 2-4488-01-02/06 Date: 2006-11-20Page 5 of 49 1.5 Test item (EUT) Description of EUT : 24 GHz WIDEBAND VEHICULAR RADAR SYSTEM System designation : Bind spot warning Type designation : SVDO-BSD Name : SIEMENS AG SIEMENS VDO Automotive P.O. Box : 10 09 43 Town : 93055 Regensburg Country : Germany 1.6 Technical data Frequency range : 24.250 GHz to 25.100 GHz Operational frequency of device : 24.666 500 GHz (BROAD BEAM) and 24.666 000 GHz (TILT BEAM) EIRP PEP : -36.0 dBm Peak Type of modulation : 603MF0N (UWB) Microwave modules : TX / RX – Module-integrated Patch antennas Normal DC power supply : 12.0 V Extreme DC power supply : 10.8 V ... 15.6 V 1.6.1 Operation conditions Operation As soon…

Text truncated - open the document above for the full version.

CETECOM ICT Services GmbH Test report No.: 2-4488-01-02/06 Date: 2006-11-20Page 40 of 49 4 Photographs 4.1 Photographs of the test set-up Radiated Emissions up to 1.0 GHz CETECOM ICT Services GmbH Test report No.: 2-4488-01-02/06 Date: 2006-11-20Page 41 of 49 CETECOM ICT Services GmbH Test report No.: 2-4488-01-02/06 Date: 2006-11-20Page 42 of 49 CETECOM ICT Services GmbH Test report No.: 2-4488-01-02/06 Date: 2006-11-20Page 43 of 49 Radiated emissions measurement above 1.0 GHz CETECOM ICT Services GmbH Test report No.: 2-4488-01-02/06 Date: 2006-11-20Page 44 of 49 CETECOM ICT Services GmbH Test report No.: 2-4488-01-02/06 Date: 2006-11-20Page 45 of 49 CETECOM ICT Services GmbH Test report No.: 2-4488-01-02/06 Date: 2006-11-20Page 46 of 49