KR5TIS-01Tire Pressure Monitoring System

To Whom It may Concern: FCC-ID: KR5TIS-01 IC: 7812D-TIS-01 FCC Statements FCC § 15.19 Labelling requirements This device complies with part 15 of the FCC Rules and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC § 15.21 Information to user Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. INDUSTRY CANADA Statements Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. The above mentioned statements and paragraphs will be placed in a prominent location in the final user manual. Final manual is not available at the time of certification. Signature Date: 4/10/2015 Aa authorized/ NAME AND TITLE (Please print or type): Berthold Braun B.Sc. Testing and cerification project manager 7 layers AG, Borsigstrasse 11, D- 40880 Ratingen, Germany Phone:+49 (0)2102 749 454 Fax: +49 (0)2102 749 350 Email: [email protected] .

-1- FCCApplication submission form. Dear Sirs, As authorized hereby applying for FCCapplication Applicant Continental Automotive GmbH Company Address Siemensstrasse 12 93055 Regensburg Germany Contact person Mrs Dagmar Kolar E-Mail Dagmar.Kolar@contin ental-corporation.com Website/ Company URL www.continental- corporation.com Phone +49 941 790 6699 Fax +49 941 79013 6699 Agent of the Applicant, if applicable 7Layers Company (Agent) Address Borsigstr. 11 40880Ratingen Germany Contact person BertholdBraun E-Mail Berthold.Braun@7laye rs.com Website / Company URL www.7Layers.com Phone +49 (0)2102 749 454 Fax +49 (0)2102 749 350 The applicant is listed in the FCC database:YesNo Applicant/Grantee Code (MUST be obtained, refer to the FCC website http://www.fcc.gov) KR5 FCC Identifier (FCC ID)of the product, if applicableKR5TIS-01 Specific Rule Selection applied for (e.g. Section 15.247) 47CFR Ch.1, Part 2-Subpart J, Part 15 Subpart C Product DetailsShort Description Tire pressure monitoring System Type or Model Name TIS-01 Brand Name Continental Ratingen ,16.10.2012BertholdBraun Place, DateSignature and Stamp

Continental Automotive GmbH Siemensstr. 12 93055 Regensburg Postfach 100 953 93009 Regensburg Phone +49 941 790-0 Fax +49 941 790-4999 www.continental-corporation.com Registered Office: Hanover Registered Court: Amtsgericht Hanover HRB 59424 General Managers: Gerard Cordonnier, Helmut Matschi, Harald Stuhlmann March 31, 2015 Your message dated Our Reference Your reference Authorization Letter for FCC / IC certification The company 7layers AG has been contracted by Continental Automotive to obtain “FCC and IC certification” for the following electronic component manufactured and/or released by Continental Automotive: MODEL NAME TIS-01 FCC ID: KR5TIS-01 IC: 7812D-TIS-01 The following persons at 7 layers AG will be authorized: - Berthold Braun - Alexey Yevdokymov - Carsten Steinröder Unless future correspondence from Continental Automotive directs otherwise, please extend your full cooperation to 7 layers regarding matters to the above mentioned products for the period beginning 31 March 2015 through end of the project date. Thank you. Dagmar Kolar Manager RF Homologation Dagmar Kolar RF Homologation / QL RBG EMC & ET LAB Tel. +49 941 790-6699 Fax +49 941 790-996699 dagmar.kolar@continental- corporation.com Continental Automotive GbmH – Postfach 10 09 43 – 93009 Regensburg - 2 -

THIS MUST BE SIGNED BY THE APPLICANT/AGENT AND SHOULD BE PLACED ON APPROPRIATE LETTERHEAD 020415 – 08 Request for Confidentiality Date: _16 th April 2015__ Subject: Confidentiality Request for: ______KR5TIS-01, 7812D-TIS01_____ Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 6.4, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Exhibit Short Term Permanent Block Diagrams Short Term External Photos Short Term Permanent* 3 Internal Photos Short Term Permanent Operation Description/Theory of Operation Short Term Permanent Parts List & Placement/BOM Short Term Permanent Tune-Up Procedure Short Term Permanent Schematics Short Term Test Setup Photos Short Term Permanent* 3 User’s Manual Continental Automotive GmbH has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of _____________N/A___________ days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications: IC currently only distinguishes Permanent Confidentiality exhibits as shown above. Short Term confidentiality is not considered applicable to IC applications. Sincerely, By: __Project Manager – Type Approval Services _ _____Berthold Braun_____ (Signature/Title 4 ) (Print name) 3 - The asterisked items (*) require further information to be provided to ACB before permanent confidentiality will be extended to these exhibits. Please refer to FCC KDB 726920 and the specific Document link for D01 found at: https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=41731 and review section V regarding EXCEPTIONAL CIRCUMSTANCES. As of the October 2014 version of this document, TCB’s can not authorize these requests. The applicant should petition the FCC by submitting an inquiry as directed. A copy of this inquiry and the FCC’s response must be provided with the application. 4 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead.

Test Laboratory: 7Layers AG Borsigstrasse 11 40880 Ratingen Germany Note: The following test results relate only to the devices specified in this document. This report shall not be reproduced in parts without the written approval of the test laboratory. 7 layers AG Aufsichtsratsvorsitzender Registergericht registered in: Borsigstrasse 11 Chairman of the Supervisory Board: Düsseldorf, HRB 44096 40880 Ratingen, Germany Peter Mertel USt-IdNr  VAT No.: Phone: +49 (0) 2102 749 0 Vorstand Board: DE 203159652 Fax: +49 (0) 2102 749 350 Dr. H. Ansorge TAX No. 147/5869/0385 www.7Layers.com A Bureau Veritas Group Company FCC Measurement/Technical Report on Tire Pressure Generation 1C wheel unit Type TIS-01 Report Reference: MDE_CONTI_1506_FCCa_rev_1 FCC ID: KR5TIS-01 IC: 7812D-TIS01 Test report Reference: MDE_CONTI_1506_FCCa_rev_1 Page 2 of 39 Table of Contents 0 Summary 3 0.1 Technical Report Summary 3 0.2 Measurement Summary 4 1 Administrative Data 5 1.1 Testing Laboratory 5 1.2 Project Data 5 1.3 Applicant Data 5 1.4 Manufacturer Data 5 2 Test object Data 6 2.1 General EUT Description 6 2.2 EUT Main components 7 2.3 Ancillary Equipment 7 2.4 Auxiliary Equipment 7 2.5 EUT Setups 7 2.6 Operating Modes 8 2.7 Product labelling 8 3 Test Results 9 3.1 Duty cycle measurement (based on dwell time measurement) 9 3.2 Spurious radiated emissions 11 3.3 Maximum radiated field strength at fundamental frequency 17 3.4 Occupied bandwidth 18 4 Test Equipment 19 5 Photo Report 25 6 Setup Drawings 25 7 Correlation table FCC-IC 26 8 Annex measurement plots 27 8.1 Duty cycle measurement (based on dwell time measurement) 27 8.2 Radiated emissions 31 8.3 Occupation bandwidth 38 Test report Reference: MDE_CONTI_1506_FCCa_rev_1 Page 3 of 39 0 Summary 0.1 Technical Report Summary Type of Authorization Certification for an Intentional Radiator (Periodic operation in the band above 70 MHz) Applicable FCC Rules Edition of FCC Rules: October 1, 2014 Prepared in accordance with the requirements of FCC Rules and Regulations as listed in 47 CFR Ch.1 Parts 2 and 15. The following subparts are applicable to the results in this test report. Part 2, Subpart J - Equipment Authorization Procedures, Certification Part 15, Subpart C – Intentional Radiators § 15.201 Equipment authorization requirement § 15.207 Conducted limits § 15.209 Radiated emission limits; general requirements § 15.231 Periodic operation in the band 40.66-40.70 MHz, above 70 MHz Note: none Summary Test Results: The EUT complied with all performed tests as listed in chapter 0.2 Measurement Summary. Test report Reference: MDE_CONTI_1506_FCCa_rev_1 Page 4 of 39 0.2 Measurement Summary FCC Part 15, Subpart C § 15.207 Conducted emissions (AC power line) The measurement was performed according to ANSI C63.4 2009 OP-Mode Setup Port Final Result AC Port (power line) N/A FCC Part 15, Subpart C § 15.231 Duty cycle measurement (based on dwell time measurement) The measurement was performed according to FCC § 15.31 10-1-14 Edition OP-Mode Setup Port Final Result op-mode 3 Setup_01 Enclosure passed FCC Part 15, Subpart C § 15.231 Spurious Radiated Emissions The measurement was performed according to ANSI C63.4 2009 OP-Mode Setup Port Final Result op-mode 1 Setup_01 Enclosure passed FCC Part 15, Subpart C § 15.231 Maximum radiated field strength at fundamental frequency The measurement was performed according to ANSI C63.4 2009 OP-Mode Setup Port Final Result op-mode 1 Setup_01 Enclosure passed FCC Part 15, Subpart C § 15.231 Occupied Bandwidth The measurement was performed according to FCC § 15.31 10-1-14 Edition OP-Mode Setup Port Final Result op-mode 2 Setup_01 Enclosure passed N/A not applicable (the EUT is powered by DC internal battery) Revision History Report version control Version Release date Change Description Version validity initial 2015-04-09 - invalid rev1 2015-04-16 - Added remark to 3.3.3 for the EUT compliance according to Part 15.231 (e) - Changed IC ID to 7812D-TIS01 - EUT antenna gain value changed valid Responsible for Accreditation Scope: Responsible for Test Report: Test report Reference: MDE_CONTI_1506_FCCa_rev_1 Page 5 of 39 1 Administrative Data 1.1 Testing Laboratory Company Name: 7Layers AG Address Borsigstr. 11 40880 Ratingen Germany This facility has been fully described in a report submitted to the FCC and accepted under the registration number 96716. The test facility is also accredited by the following accreditation organisation: Laboratory accreditation no.: DAkkS D-PL-12140-01-01 Responsible for Accreditation Scope: Dipl.-Ing. Bernhard Retka Dipl.-Ing. Robert Machulec Dipl.-Ing. Andreas Petz Dipl.-Ing. Marco Kullik Report Template Version: 2014-04-02 1.2 Project Data Responsible for testing and report: Dipl.-Ing. Dobrin Dobrinov Date of Test(s): 2015-04-02 to 2015-04-06 Date of Report: 2015-04-16 1.3 Applicant Data Company Name: Continental Automotive GmbH Address: Siemensstrasse 12 93055 Regensburg, Germany Contact Person: Mr. Josef Lohr 1.4 Manufacturer Data Company Name: Address: Continental Automotive 1 Avenue Paul Ourliac 31100 Toulouse, France Contact Person: Mr. Josef Lohr Test report Reference: MDE_CONTI_1506_FCCa_rev_1 Page 6 of 39 2 Test object Data 2.1 General EUT Description Equipment under Test Tire Pressure Generation 1C wheel unit Type Designation: Type TIS-01 Kind of Device: (optional) 433 MHz transmitter Voltage Type: DC internal battery Voltage level: 3.0 V Repeated Operation: Automatic The EUT is part of a security or safety system: No General product description: The Equipment Under Test (EUT) is a wireless transmitter for non-periodic operation in the band above 70 MHz. The operating frequency is in the 433 MHz ISM band. Specific product description for the EUT: The transmitter, together with its DC supply battery, is encapsulated into the vehicles wheel valve stem. Every 64 seconds when set in drive mode, the transmitter sends the tire pressure, acceleration and temperature data. The sample used for tests contains a …

Text truncated - open the document above for the full version.

Test Laboratory: 7Layers AG Borsigstrasse 11 40880 Ratingen Germany Note: The following test results relate only to the devices specified in this document. This report shall not be reproduced in parts without the written approval of the testlaboratory. 7 layers AGAufsichtsratsvorsitzenderRegistergerichtregistered in: Borsigstrasse 11Chairman of the Supervisory Board:Düsseldorf, HRB 44096 40880 Ratingen, GermanyPeter MertelUSt-IdNrVAT No.: Phone: +49 (0) 2102 749 0VorstandBoard:DE 203159652 Fax: +49 (0) 2102 749 350Dr. H.-J. MeckelburgTAX No. 147/5869/0385 www.7Layers.comDr. H. Ansorge Photo Report on Test Setups For report MDE_CONTI_1506_FCCa_rev_1 Report Reference:MDE_HARMAN_CONTI_1506_FCCa_rev_1_Setup_Photos Version: 2015-04-21 FCC ID:KR5TIS-01 Testreport Reference: MDE_HARMAN_1303_FCCa_LevelB_Setup_PhotosPage2of5 Photo 1, 2:Test setup for radiated measurements, EUT in horizontal position Enclosure, semi-anechoic chamber, below 30 MHz, intentional radiator §15 Testreport Reference: MDE_HARMAN_1303_FCCa_LevelB_Setup_PhotosPage3of5 Testreport Reference: MDE_HARMAN_1303_FCCa_LevelB_Setup_PhotosPage4of5 Photo 3,4, 5:Test setup for radiated measurements, EUT in vertical position Enclosure, semi-anechoicchamber, 30 MHz to 1 GHz, intentional radiator §15 Testreport Reference: MDE_HARMAN_1303_FCCa_LevelB_Setup_PhotosPage5of5 Photo 6, 7:Test setup for radiated measurements, EUT in horizontal position Enclosure, fully-equipped anechoic chamber,1-4,5GHz§15