LDKIW9165DHWi-Fi 6E Outdoor Access Point

Cisco Systems, Inc. 2024-07-29 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Attestation Statements for U-NII 6 GHz Dear Sir/Madam, Cisco Systems, Inc. hereby declare that for our product, Wi-Fi 6E Outdoor Access Point, Model: IW9165DH-B, FCC ID: LDKIW9165DH, is in compliance with FCC regulations per KDB 987594 D01 U-NII 6GHz General Requirements v02r02: 1. Device Protocol Attestation Statement: a) This device will contact an AFC system at least once per day to obtain the latest list of available frequencies and the maximum permissible power the standard power device may operate with on each frequency at the standard power device's location. If the device fails to successfully contact the AFC system during any given day, the standard device may continue to operate until 11:59 p.m. of the following day at which time it will cease operations until it re-establishes contact with the AFC system and re-verifies its list of available frequencies and associated power levels - 15.407(k)(8)(iv) b) This device will automatically acquire geolocation and re-register with AFC to obtain frequency and power values after a power cycle. c) This device if using an external geolocation source will be connected to the standard power device using a secure connection that ensures that only an external geolocation source approved for use with a standard power device provides geographic coordinates to that standard power device. Alternatively, an extender cable may be used to connect a remote receive antenna to a geolocation receiver within a standard power device. 2. Statement Acknowledging device restrictions: a) This device is prohibited for control of or communications with unmanned aircraft systems, including drones Cisco Systems, Inc. Sincerely Yours, Adam Walb Manager, IoT RF and Compliance [email protected] 125 W Tasman Drive San Jose, CA 95134 United States

Cisco Systems, Inc. CFR 47 §2.911(d)(5)(i) Attestation Letter Cisco Confidential Attestation Letter Date: 06/21/2024 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(5)(i) Filing FCC ID: LDKIW9165DH Cisco Systems, Inc. (“the applicant”) certifies that the equipment for which authorization is sough is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Adam Walb Manager, IoT RF and Compliance [email protected] Cisco Systems Inc 125 W Tasman Drive San Jose, CA 95134 United States

Cisco Systems, Inc. CFR 47 §2.911 (d)(5)(ii) Attestation Letter Cisco Confidential Attestation Letter Date: 06/21/2024 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(5)(ii) Filing FCC ID: LDKIW9165DH Cisco Systems, Inc. (“the applicant”) certifies that as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Adam Walb Manager, IoT RF and Compliance [email protected] Cisco Systems Inc 125 W Tasman Drive San Jose, CA 95134 United States

Cisco Systems, Inc. Cisco Confidential Attestation Letter for Agent 06/21/2024 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements Part 2.911 (d)(7) Filing FCC ID: LDKIW9165DH Cisco Systems, Inc. certifies that, as of the date of the filing of the application, Cisco Systems, Inc. is our designated U.S. agent for service of process for the above referenced FCC ID: LDKIW9165DH. Cisco Systems, Inc. agrees to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Cisco Systems, Inc. accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information: Company name: Cisco Systems Inc (FRN: 0004968939) Address: 125 W Tasman Drive San Jose, CA 95134 United States Contact person: Adam Walb Tel: +1 (408) 526 4124 Email: [email protected] Sincerely, Applicant Name Cisco Systems Inc Applicant Printed Name Adam Walb Applicant Signature

Geolocation Accuracy Test Description Appendix A Sporton International Inc. Hsinchu Laboratory Page No. : 1 of 3 TEL : 886-3-656-9065 Report No. : F2281101-12 FAX : 886-3-656-9085 Geolocation Accuracy Test Description To assess the geolocation accuracy of AFC devices, Sporton Lab has developed a comprehensive field trial test plan. This plan employs a standard reference point with a precisely known location to gauge the geolocation accuracy of AFC devices. The measurements were conducted at 5000 sample points, utilizing GPS data, which was recorded during the trial test. Subsequently, 5000 location data points were collected, and the horizontal and vertical location uncertainty was calculated at a 95% confidence level. Horizontal lo cation uncertainty is calculated using both circle (R95) and ellipse (E95) methods. Manufacturers can choose one for their application. 1. Standard Reference Point: Taiwan Class 1 Level Reference Net was provided by Taiwan Satellite Survey Center, Depart of Land Administration. M.O.I. [1] and the class 1 grade 1 level reference net horizontal results at latitude, longitude and height direction deviation average values are ±1.4 cm, ±1.3 cm, and ±10.9 cm, respectively. Reference Point Number: 6017 Coordinate System: TWD97 Easting (E): 249570 Northing (N): 2743380 Orthometric Height: 40m Converted the coordinate TWD97 to WGS84 DD: Longitude: 120.995747 Latitude: 24.797783 Above Mean Sea Level (AMSL) Height: 40.52m (Test table height: 0.52m) 2. GPS Measurement Data: Sporton only captures GPS data and does not use GNSS, SABS, Galileo, Quasi-Zenith and BeiDou. Examples of source material are provided below. $GPGGA is the GPS log output. Sporton captures that the second through fifth digits represent horizontal position and the 9th digit represents altitude. Geolocation Accuracy Test Description Appendix A Sporton International Inc. Hsinchu Laboratory Page No. : 2 of 3 TEL : 886-3-656-9065 Report No. : F2281101-12 FAX : 886-3-656-9085 3. 5000 Samples: Referring to [2], errors were analyzed for series comprising 600 measurements (over a 10-minute duration) up to 44,500 measurements (over a 12-hour duration). Position radius errors converged after capturing 4,800 samples during an 80-minute measurement period. For the Sporton test report, 5,000 samples were chosen with a measurement duration of 120 minutes. 4. Radius of the 95% Probability Circle (R95) Error (XY): R95 Error represents the radius of the circle encompassing 95% of the position-determining results. Calculation of R95 Error is performed using the following formula: R95 Error = 2.08 × (0.56σx + 0.62σy) [2] Where σx and σy are the standard deviations from the known position in the directions of the coordinate axes. At a 95% confidence level: 95% Confidence Level = R95 Error + Mean Error Mean Error is calculated as Mean Point – Standard Point. 5. Confidence 95% Ellipse (E95) Error (XY): E95 Error, which is the ellipse error comprising 95% of the position determining results is following formula: In our case, the length of the axes are defined by the standard deviations σx and σy of the data such that the equation of the error ellipse becomes: � 푥푥 σ 푥푥 � 2 +� 푦푦 σ 푦푦 � 2 =푠푠 = 5.991 [3] [4] [5] where s defines the scale of the ellipse chi-square distribution number. Thus, the 95% confidence ellipse can be defined similarly to the axis-aligned case, with the major axis of length 2 � 푠푠휆휆 1 and the minor axis of length 2 � 푠푠휆휆 2 , Where λ1 and λ2 represent the eigenvalues of the covariance matrix. To obtain the ellipse orientation: α=arctan V1(y) V1(x) where V1 is the eigenvector of the covariance matrix that corresponds to the largest eigenvalue. 95% confidence level= E95 Error + Mean Error Mean Error = Mean point – Standard point 6. 95% Probability Height Error (Z): Height Error represents the range encompassing 95% of the position-determining results in the Z-axis. Calculation of Z Error is performed using the following formula: Z Error = 1.96 × σz [6] Where σz is the standard deviation from the known position in the Z-axis. At a 95% confidence level: 95% Confidence Level = Z Error + Mean Error Mean Error is calculated as Mean Point – Standard Point. References: [1] Class 1 Level Reference Net by Satellite Survey Center, Depart of Land Administration. M.O.I. https://gps.moi.gov.tw/sscenter/Introduce_E/IntroducePage_E.aspx?Page=GPS_E8 [2] AN EXPERIMENTAL INVESTIGATION INTO THE POSITIONING ACCURACY OF LOW-COST GPS RECEIVERS Geolocation Accuracy Test Description Appendix A Sporton International Inc. Hsinchu Laboratory Page No. : 3 of 3 TEL : 886-3-656-9065 Report No. : F2281101-12 FAX : 886-3-656-9085 IN LABVIEW ENVIRONMENT by Politechnika Gdańska Wydział Elektrotechniki i Automatyki Gdańsk 2015 [3 ] https://www.visiondummy.com/2014/04/draw-error-ellipse-representing-covariance-matrix/ [4 ] Two-Dimensional Measures of Accuracy in Navigational Systems by Gerald.Y. Chin Transportation Systems Center Cambridge, MA 02142 [5 ] BORG, F, 2002. The Confidence 95 Ellipse [online]. Finland [cit. 2017-01-07]. [6 ] Normal Distribution | Examples, Formulas, & Uses by Pritha Bhandari. https://www.scribbr.com/statistics/normal-distribution/ Geolocation Accuracy Test Report Appendix B Sporton International Inc. Hsinchu Laboratory Page No. : 1 of 14 TEL : 886-3-656-9065 Report No. : F2281101-12 FAX : 886-3-656-9085 Issued Date : Jan. 31, 2024 Report Template No.: CB-H4_1 Ver1.0 Report Version : 01 Geolocation Accuracy Test Report Equipment : GPS Module Brand Name : Ublox Model Name : ZOE-M8G Applicant : Cisco Systems Inc 125 West Tasman Drive San Jose California United States 95134-1706 Manufacturer : Cisco Systems Inc 125 West Tasman Drive San Jose California United States 95134-1706 Sample Received : Oct. 25, 2023 Start Test Date : Dec. 25, 2023 Final Test Date : Dec. 26, 2023 Standard : FCC KDB 987594 D01v02 Geolocation Accuracy Test Report Appendix B Sporton International Inc. Hsinchu Laboratory Page No. : 2 of 14 TEL : 8…

Text truncated - open the document above for the full version.

QA-FR-170-B 7/29/2014 FCC Authorization 2024-06-21 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern: We Cisco Systems, Inc., the undersigned, Hereby authorizes Bay Area Compliance Laboratories Corp. to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Bay Area Compliance Laboratories Corp. on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Adam Walb Manager, IoT RF and Compliance [email protected] 125 W Tasman Drive San Jose, CA 95134 United States

QA-FR-172-A Cisco Systems, Inc. FCC Confidential Authorization 06/21/2024 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: LDKIW9165DH In accordance with Sections 0.457 and 0.459 of the Commission’s Rules, Cisco Systems, Inc. hereby requests long-term confidential treatment of information accompanying this application as outlined below:  U-NII Software Security Declaration Letter  PIA Approval Letter  Geolocation Justification Report  Block Diagram  Operation Description  Schematics As well as short-term (180 Days) confidential treatment of information accompanying this application as outlined below:  External Photos  Internal Photos  Test Set-up Photos  User Manual The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely, Adam Walb Manager, IoT RF and Compliance [email protected] Cisco Systems, Inc. 125 W Tasman Drive San Jose, CA 95134 United States

EDCS-1216337 09/30/2020 Subject : Authorized signatures The following people are authorized by Cisco Systems to sign documents for FCC product approval under FCC Grantee code LDK, and ISED product approval under ISED registration 2461N on behalf of the company. Further this right is extended to any regular Cisco employee as deemed necessary. Louie Castro Jialei Xue Adam Walb Lillian Yao Howard Ji Haiwen Lu Jose Aguirre Allesandro Erta Emily Jaser Bogdan Tudosoiu Rekha Simha Andrea Orioli Guangmin Ouyang Rochelle Jacobsen Regards Sam Kim Cisco Systems

Label and Label locaƟon EUT BoƩom View

Cisco Confidential Maximum Permissible Exposure Study - Engineering Analysis IW9165DH-B IW9165DH-A Cisco Industrial Wireless Access Point FCC ID: LDKIW9165DH IC: 2461A-IW9165DH 2400-2483.5 MHz, 4.9GHz 5150-5250 MHz, 5250-5350 MHz, 5470-5725 MHz, 5725-5850 MHz 5925-6425MHz & 6525-6875MHz Against the following Specifications: 47 Code of Federal Regulations 2.1091 RSS-102 Issue 5 Cisco Systems 170 West Tasman Drive San Jose, CA 95134 This report replaces any previously entered test report under This test report has been electronically authorized and archived using the CISCO Doc Central. Test Report Template EDCS# 11556830. Cisco Confidential Table of Contents History of this test report ..................................................................................................................................... 3 Summary of Test Result ....................................................................................................................................... 4 1 General Description .................................................................................................................................. 5 1.1 EUT General Information ............................................................................................................................ 5 1.2 Antenna Information .................................................................................................................................... 6 1.3 Table for EUT support function ................................................................................................................. 12 1.4 Table for Radio function ............................................................................................................................ 12 1.5 Accessories ................................................................................................................................................ 12 1.6 Applicable Standards ................................................................................................................................ 13 1.7 Testing Location ........................................................................................................................................ 13 2 Maximum Permissible Exposure ........................................................................................................... 14 2.1 Limit of Maximum Permissible Exposure ................................................................................................. 14 2.2 MPE Calculation Method .......................................................................................................................... 14 2.3 MPE Exemption ......................................................................................................................................... 15 2.4 Calculated Result and Limit ...................................................................................................................... 16 Cisco Confidential Summary of Test Result Report Clause Ref Std. Clause Test Items Result (PASS/FAIL) Remark 2 - Exposure evaluation PASS - Declaration of Conformity: 1. The test results with all measurement uncertainty excluded are presented in accordance with the regulation limits or requirements declared by manufacturers. It’s means measurement values may risk exceeding the limit of regulation standards, if measurement uncertainty is include in test results. 2. The measurement uncertainty please refer to report” Measurement Uncertainty”. Cisco Confidential 1 General Description 1.1 EUT General Information RF General Information Evaluation Mode Frequency Range (MHz) Operating Frequency (MHz) Modulation Type 5GHz WLAN 5150-5250 5250-5350 5470-5725 5725-5850 5180-5250 5250-5320 5500-5720 5745-5825 802.11a/n: OFDM (BPSK, QPSK, 16QAM, 64QAM) 802.11ac: OFDM (BPSK, QPSK, 16QAM, 64QAM, 256QAM) 802.11ax: OFDMA (BPSK, QPSK, 16QAM, 64QAM, 256QAM, 1024QAM) 6GHz WLAN 5925-6425 6525-6875 5955-6415 6535-6855 802.11ax: OFDMA (BPSK, QPSK, 16QAM, 64QAM, 256QAM, 1024QAM) 4.9GHz WLAN 4940-4990 4945-4985 OFDM (BPSK, QPSK, 16QAM, 64QAM) Bluetooth 2400-2483.5 2402-2480 LE: GFSK Cisco Confidential 1.2 Antenna Information Product ID Family Description Supported by IW9165DHD? Supported by IW9165E? Peak Gain 2.4 GHz (dBi) Peak Gain 4.9 GHz (dBi) Peak Gain 5 GHz (dBi) Gain > 30° Elevation UNII-1 (dBi) Peak Gain 6 GHz (dBi) Gain > 30 ° Elevation UNII-5 & 7 5 GHz Fixed Point-to- Point? 5 GHz Point-to- Multipoint? IW-ANT-OMM-53-N= Legacy 5 GHz 3 dBi Omnidirectional Antenna, Multi-polarized, N Female Connector No Yes N/A 3 3 0 N/A N/A No Yes AIR-ANT5180V-N= Legacy 5 GHz 8 dBi Omnidirectional Colinear Array Antenna, N Male Connector Yes Yes N/A 8 8 -3 N/A N/A No Yes IW-ANT-PNL-59-N= Legacy 5 GHz 9 dBi 2-Element Patch Array Antenna, Slant ±45 Polarized, N Female Connectors Yes Yes N/A N/A 10 7 N/A N/A Yes Yes AIR-ANT5114P2M-N= Legacy Yes Yes N/A N/A 13 4 N/A N/A Yes Yes AIR-ANT5114P2M-NS= SIA Yes Yes N/A N/A 13 3 N/A N/A Yes Yes IW-ANT-SKD-513-Q= Legacy 5 GHz 14 dBi 2-Element Shark Antenna, Slant ±45 Polarized, QMA Female Connectors No Yes N/A 13 13 8 N/A N/A No Yes IW-ANT-SKS-514-Q= Legacy 5 GHz 14 dBi 2-Element Shark Antenna, Slant ±45 Polarized, QMA Female Connectors No Yes N/A 13 13 8 N/A N/A No Yes AIR-ANT2547V-N= Legacy 2.4 GHz 4 dBi / 5 GHz 7 dBi Omnidirectional Colinear Array Antenna, N male connector Yes Yes 4 N/A 7 -3 N/A N/A No Yes AIR-ANT2547VG-N= Legacy Yes Yes 4 N/A 7 -3 N/A N/A No Yes AIR-ANT2547VG-NS= SIA Yes Yes 4 N/A 7 -3 N/A N/A No Yes AIR-ANT2568VG-N= Legacy Yes Yes 6 N/A 8 3 N/A N/A No Yes AIR-ANT2568VG-NS= SIA Yes Yes 6 N/A 8 3 N/A N/A No Yes AIR-ANT2588P4M-NS= SIA 2.4 GHz 8 dBi / 5 GHz 8 dBi 4-Element Dual-Polarized Patch Antenna, N No Yes 8 N/A 8 -2 N/A N/A No Yes AIR-ANT2513P4M-N= Legacy No Yes 13 N/A 13 1 N/A N/A Yes Yes AIR-ANT2513P4M-NS= SIA No Yes 13 N/A 13 1 N/A N/A Yes Yes IW-ANT-OMV-2567-N SIA Tri-band 2.4 GHz 4 dBi, 5/6 GHz 7 dBi Omnidirection…

Text truncated - open the document above for the full version.

Radio Test Report No: EDCS - 24733400 Page No: 1 of 38 This document is uncontrolled. Please refer to the electronic copy within EDCS for the most up to date version. Cisco Systems, Inc. Company Confidential Cisco Confidential UNII-5 (5925 – 6425 MHz) Wi-Fi Radio Test Report (Radiated Spurious Emissions Only) For IW9165DH-B (5/6 GHz Radio) IW9165DH-A (5/6 GHz Radio) Supports 5/6 GHz 802.11 a/n/ac/ax Wi-Fi + Bluetooth LE v5.0 + GNSS radio FCC ID: LDKIW9165DH Equipment Class: 6SD Against the following Specifications: 47 CFR 15.205 47 CFR 15.209 CFR47 Part 15.407 Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134 Radio Test Report No: EDCS - 24733400 Page No: 2 of 38 This document is uncontrolled. Please refer to the electronic copy within EDCS for the most up to date version. Cisco Systems, Inc. Company Confidential Cisco Confidential Author: Danh Le Tested By: Farida Rahmanzai Title: Test Engineer Approved By: Howard Ji Title: Compliance Manager Revision 1.0 This report replaces any previously entered test report under EDCS – ########. This test report has been electronically authorized and archived using the CISCO Engineering Document Control system. Test Report Template EDCS# 23517657 Radio Test Report No: EDCS - 24733400 Page No: 3 of 38 This document is uncontrolled. Please refer to the electronic copy within EDCS for the most up to date version. Cisco Systems, Inc. Company Confidential Cisco Confidential Table of Contents SECTION 1: OVERVIEW ......................................................................................................................................... 4 1.1 TEST SUMMARY ................................................................................................................................................... 4 SECTION 2: ASSESSMENT INFORMATION ...................................................................................................... 5 2.1 GENERAL ............................................................................................................................................................. 5 2.2 UNITS OF MEASUREMENT .................................................................................................................................... 5 2.3 DATE OF TESTING (INITIAL SAMPLE RECEIPT DATE TO LAST DATE OF TESTING) ................................................... 7 2.4 REPORT ISSUE DATE ............................................................................................................................................ 7 2.5 TESTING FACILITIES ............................................................................................................................................. 7 2.6 EQUIPMENT ASSESSED (EUT) .............................................................................................................................. 8 2.7 EUT DESCRIPTION ............................................................................................................................................... 8 SECTION 3: RESULT SUMMARY ....................................................................................................................... 10 SECTION 4: SYSTEM DETAILS AND MODE OF OPERATION ..................................................................... 11 4.1 SAMPLE DETAILS ........................................................................................................................................... 11 4.2 SYSTEM DETAILS ........................................................................................................................................... 11 4.3 MODE OF OPERATION DETAILS ...................................................................................................................... 11 APPENDIX A: EMISSION TEST RESULTS ...................................................................................................... 12 A.1 SETUP DIAGRAM ....................................................................................................................................... 12 A.2 RADIATED SPURIOUS EMISSIONS TEST REQUIREMENTS & LIMITS ............................................................ 14 A.3 LIMIT CONVERSION (POWER TO FIELD STRENGTH) ................................................................................... 17 A.4 TEST PROCEDURE ...................................................................................................................................... 18 A.5 TX RADIATED SPURIOUS EMISSIONS GRAPHICAL DATA RESULTS ............................................................ 19 APPENDIX B: LIST OF TEST EQUIPMENT USED TO PERFORM THE TEST ......................................... 31 APPENDIX C: ABBREVIATION KEY AND DEFINITIONS ............................................................................ 32 APPENDIX D: PHOTOGRAPHS OF TEST SETUPS ......................................................................................... 33 APPENDIX E: SOFTWARE USED TO PERFORM TESTING ......................................................................... 34 APPENDIX F: TEST PROCEDURES ................................................................................................................... 35 APPENDIX G: SCOPE OF ACCREDITATION (A2LA CERTIFICATE NUMBER 1178-01) ....................... 36 APPENDIX H: TEST ASSESSMENT PLAN ........................................................................................................ 37 APPENDIX I: WORST CASE JUSTIFICATION ................................................................................................ 38 Radio Test Report No: EDCS - 24733400 Page No: 4 of 38 This document is uncontrolled. Please refer to the electronic copy within EDCS for the most up to date version. Cisco Systems, Inc. Company Confidential Cisco Confidential Section 1: Overview 1.1 Test Summary The samples were assessed against the tests detailed in section 3 under the requirements of the following spec…

Text truncated - open the document above for the full version.

Radio Test Report No: EDCS - 24733402 Page No: 1 of 38 This document is uncontrolled. Please refer to the electronic copy within EDCS for the most up to date version. Cisco Systems, Inc. Company Confidential Cisco Confidential UNII-7 (6525 – 6875 MHz) Wi-Fi Radio Test Report (Radiated Spurious Emissions Only) For IW9165DH-B (5/6 GHz Radio) IW9165DH-A (5/6 GHz Radio) Supports 5/6 GHz 802.11 a/n/ac/ax Wi-Fi + Bluetooth LE v5.0 + GNSS radio FCC ID: LDKIW9165DH Equipment Class: 6SD Against the following Specifications: 47 CFR 15.205 47 CFR 15.209 CFR47 Part 15.407 Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134 Radio Test Report No: EDCS - 24733402 Page No: 2 of 38 This document is uncontrolled. Please refer to the electronic copy within EDCS for the most up to date version. Cisco Systems, Inc. Company Confidential Cisco Confidential Author: Danh Le Tested By: Farida Rahmanzai Title: Test Engineer Approved By: Howard Ji Title: Compliance Manager Revision 1.0 This report replaces any previously entered test report under EDCS – ########. This test report has been electronically authorized and archived using the CISCO Engineering Document Control system. Test Report Template EDCS# 24449925 Radio Test Report No: EDCS - 24733402 Page No: 3 of 38 This document is uncontrolled. Please refer to the electronic copy within EDCS for the most up to date version. Cisco Systems, Inc. Company Confidential Cisco Confidential Table of Contents SECTION 1: OVERVIEW ......................................................................................................................................... 4 1.1 TEST SUMMARY ................................................................................................................................................... 4 SECTION 2: ASSESSMENT INFORMATION ...................................................................................................... 5 2.1 GENERAL ............................................................................................................................................................. 5 2.2 UNITS OF MEASUREMENT .................................................................................................................................... 5 2.3 DATE OF TESTING (INITIAL SAMPLE RECEIPT DATE TO LAST DATE OF TESTING) ................................................... 7 2.4 REPORT ISSUE DATE ............................................................................................................................................ 7 2.5 TESTING FACILITIES ............................................................................................................................................. 7 2.6 EQUIPMENT ASSESSED (EUT) .............................................................................................................................. 8 2.7 EUT DESCRIPTION ............................................................................................................................................... 8 SECTION 3: RESULT SUMMARY ....................................................................................................................... 10 SECTION 4: SYSTEM DETAILS AND MODE OF OPERATION ..................................................................... 11 4.1 SAMPLE DETAILS ........................................................................................................................................... 11 4.2 SYSTEM DETAILS ........................................................................................................................................... 11 4.3 MODE OF OPERATION DETAILS ...................................................................................................................... 11 APPENDIX A: EMISSION TEST RESULTS ...................................................................................................... 12 A.1 SETUP DIAGRAM ....................................................................................................................................... 12 A.2 RADIATED SPURIOUS EMISSIONS TEST REQUIREMENTS & LIMITS ............................................................ 14 A.3 LIMIT CONVERSION (POWER TO FIELD STRENGTH) ................................................................................... 17 A.4 TEST PROCEDURE ...................................................................................................................................... 18 A.5 TX RADIATED SPURIOUS EMISSIONS GRAPHICAL DATA RESULTS ............................................................ 19 APPENDIX B: LIST OF TEST EQUIPMENT USED TO PERFORM THE TEST......................................... 31 APPENDIX C: ABBREVIATION KEY AND DEFINITIONS …

Text truncated - open the document above for the full version.