LPH-SSL001Wireless cattle monitor/alarm

SmartStock, LLC TECHNOLOGY LEADER IN LIVESTOCK HEALTH MANAGEMENT P.O. Box 337 1310 N. Sewell Pawnee, OK 74058 918.762-1065 www.smartstock-usa.com Federal Communications Commission (FCC) Statement Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

SmartStock, LLC TECHNOLOGY LEADER IN LIVESTOCK HEALTH MANAGEMENT P.O. Box 337 1310 N. Sewell Pawnee, OK 74058 918.762-1065 www.smartstock-usa.com User’s Manual. Bolus Installation instructions. FCC ID: LPH-SSL001 The bolus is designed to be ingested into ruminant animals. The bolus is approximately 1 1/8” in diameter and approximately 3” in length. The bolus is installed into the bolus gun or balling gun (figure 2). The balling gun is inserted into the esophagus of the ruminant animal. When the balling gun is inserted up to the handle, squeeze the handle to release the bolus. Assure that the flat end of the bolus is inserted into the balling gun first. The rounded end will thus go into the animals mouth first. Warning: if you are not familiar with installing boluses into ruminent animals, seek help from a professional, like a herd health management specialist or a Doctor of Vetenary Mecidian (DVM). For further information view the installation video at www.smartstock-usa.com. Figure 1 Figure 2

Ref: FCC ID# LPH-SSL001 FRN 0005859947 February 24, 2014 TUV SUD BABT TCB Octagon House, Segensworth Road, Fareham, Hampshire, PO15 5RL Letter of Authorization To Whom It May Concern: Please be advised that Techtrol , 1626 Vineyard Rd, Grand Prairie, TX 75052-1405, authorizes Professional testing to act on our behalf, until otherwise notified, for applications submitted to TUB SUD BABT TCB.. We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, U.S.C. 862. Further, no party as defined in 47 CFR 1.2002(b), to the application is subject to denial of federal benefits that includes FCC benefits. I authorize Eric Lifsey of Professional testing and W.E. Ardrey of Techtrol USA to act on our behalf” Thank you for your cooperation in this matter. Sincerely, Kent Britain Sr. RF Engineer Techtrol Inc. FRN 0005859947

SpreadNet Kent Britain PO Box 337 1310 N. Sewell Pawnee OK 74058 USA 972.660.2810 Lab 972.606.1909 Fax 972.849.0235 Cell [email protected] Subject: Grantee Code LPH I have been a business associate of Techtrol and SmartStock for the last 10 years. Since I am the contact point for all RF issues, SmartStock has permission to use LPH. Kent Britain

13662 External Photos Page 1 of 1 Side Bottom Top

Declaration Letter February 24, 2014 TUV SUD BABT TCB Octagon House, Segensworth Road, Fareham, Hampshire, PO15 5RL To Whom It May Concern: We declare that this device is of a size that is too small to bear the FCC ID, and this device is ingested by an animal, and therefore the FCC ID and statmeents are provided in the user information. Thank you for your cooperation. Sincerely, Kent Britain Sr. RF Engineer Techtrol Inc. FRN 005859947

1601 North A.W. Grimes Blvd., Suite B Round Rock, TX 78665 e-mail: [email protected] (512) 244-3371 Fax: (512) 244-1846 May 7, 2014 Kent Britain SmartStock LLC, Inc. PO Box 337 1310 N. Sewell Pawnee OK 74058 USA Dear Kent: Thank you for allowing Professional Testing (EMI), Inc. an opportunity to perform testing for SmartStock LLC. Enclosed is the Wireless Certification Report for the SSL-BOLUS. This report can be used to demonstrate compliance with FCC requirements for wireless devices in the United States. If you have any questions, please contact me. Sincerely, Jeffrey A. Lenk President Attachment Wireless Certification Report for the SmartStock LLC SSL-BOLUS 13662 Page 2 of 28 Project 13662-15 SSL-BOLUS Wireless Certification Report Prepared for: SmartStock LLC, Inc. By Professional Testing (EMI), Inc. 1601 North A.W. Grimes Blvd., Suite B Round Rock, Texas 78665 May 7, 2014 Reviewed by Written by Larry Finn Product Development Engineer Eric Lifsey Test Engineer Wireless Certification Report for the SmartStock LLC SSL-BOLUS 13662 Page 3 of 28 Revision History Revision Number Description Date 00 Draft for review. 2014‐03‐06 01 Revised per Larry Finn comments. 2014‐03‐25 02 Revised per client comments. 2014‐04‐07 03 Revised section 1.2 by author. 2014‐05‐07 Wireless Certification Report for the SmartStock LLC SSL-BOLUS 13662 Page 4 of 28 Table of Contents Revision History ............................................................................................................................................................. 3 Certificate of Compliance ............................................................................................................................................. 5 1.0 Introduction.......................................................................................................................................................... 6 1.1 Scope ............................................................................................................................................................... 6 1.2 EUT Description ............................................................................................................................................. 6 1.3 EUT Operation ................................................................................................................................................ 6 1.4 Modifications to Equipment ............................................................................................................................ 6 1.5 Test Site .......................................................................................................................................................... 6 2.0 Applicable Documents and Clauses ..................................................................................................................... 7 3.0 Fundamental Field Strength ................................................................................................................................. 8 3.1 Test Procedure ................................................................................................................................................ 8 3.2 Test Criteria .................................................................................................................................................... 8 3.3 Test Results ..................................................................................................................................................... 8 4.0 Transmitter Duty Cycle & Timings ..................................................................................................................... 9 4.1 Test Procedure ................................................................................................................................................ 9 4.2 Test Criteria .................................................................................................................................................... 9 4.3 Test Results ..................................................................................................................................................... 9 5.0 Occupied Bandwidth ......................................................................................................................................... 12 5.1 Test Procedure .............................................................................................................................................. 12 5.2 Test Criteria .................................................................................................................................................. 12 5.3 Test Results ................................................................................................................................................... 12 5.3.1 Bandwidth Plot, OBW ......................................................................................................................... 12 5.3.2 Bandwidth Plot, 20 dB ........................................................................................................................ 13 6.0 Radiated Spurious Emissions ............................................................................................................................. 14 6.1 Test Procedure .............................................................................................................................................. 14 6.2 Test Criteria .................................................................................................................................................. 14 6.3 Test Results ................................................................................................................................................... 14 6.3.1 Test Results – X Orientation ............................................................................................................... 15 6.3.2 T…

Text truncated - open the document above for the full version.

13662 Test Setup Photos Page 1 of 1 Radiated Emissions ***