M72-CCX6X7XPoly Executive

Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. (If device is outdoor AP, please delete it. If device is indoor AP, need to add it.) This device meets all the other requirements specified in Part 15E, Section 15.407 of the FCC Rules. Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Industry Canada statement: This device complies with ISED’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le présent appareil est conforme aux CNR d’ ISED applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable. Caution : (i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems; (iv) where applicable, antenna type(s), antenna models(s), and worst-case tilt angle(s) necessary to remain compliant with the e.i.r.p. elevation mask requirement set forth in section 6.2.2.3 shall be clearly indicated. Avertissement: Le guide d’utilisation des dispositifs pour réseaux locaux doit inclure des instructions précises sur les restrictions susmentionnées, notamment : (i) les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux; (iv) lorsqu’il y a lieu, les types d’antennes (s’il y en a plusieurs), les numéros de modèle de l’antenne et les pires angles d’inclinaison nécessaires pour rester conforme à l’exigence de la p.i.r.e. applicable au masque d’élévation, énoncée à la section 6.2.2.3, doivent être clairement indiqués Radiation Exposure Statement: This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with greater than 20cm between the radiator & your body. Déclaration d'exposition aux radiations: Cet équipement est conforme aux limites d'exposition aux rayonnements ISED établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé à plus de 20 cm entre le radiateur et votre corps.

Schematics Block Diagram Operational Description Software Operational Description

FCCID:M72-CCX6X7X

Reference No.: 190904C02-1 Page No. 1 / 16 CONSTRUCTION PHOTOS OF EUT Model: CCX 700 Reference No.: 190904C02-1 Page No. 2 / 16 Reference No.: 190904C02-1 Page No. 3 / 16 Reference No.: 190904C02-1 Page No. 4 / 16 Reference No.: 190904C02-1 Page No. 5 / 16 Reference No.: 190904C02-1 Page No. 6 / 16 Reference No.: 190904C02-1 Page No. 7 / 16 Model: CCX 600 Reference No.: 190904C02-1 Page No. 8 / 16 Reference No.: 190904C02-1 Page No. 9 / 16 Reference No.: 190904C02-1 Page No. 10 / 16 Reference No.: 190904C02-1 Page No. 11 / 16 Reference No.: 190904C02-1 Page No. 12 / 16 Reference No.: 190904C02-1 Page No. 13 / 16 Reference No.: 190904C02-1 Page No. 14 / 16 Reference No.: 190904C02-1 Page No. 15 / 16 Reference No.: 190904C02-1 Page No. 16 / 16

Label Location Rear Side Top FCC ID: M72-CCX6X7X IC: 1849C-CCX6X7X Label 60.0 R=0.5 36.5 EK0Z01 Yui Yang 2019/12/16 EK0Z00 Jonathan Wang 2019/12/16 EXECUTIVE CCX 600 NO HS 1. MATERIAL: POLYCARBONATE 8B35 , Matted Texture, T=0.125 MM 3. FINISH: PRINT ON BACK SURFACE 4. ADHESIVE:3M 467 OR EQUIVALENT 2. THE MATERIAL MUST BE APPROVED BY UL 5. PRINT COLOR: BACKGROUND PMS BLACK C AND MATTE SLIVER TEXT(COOL GRAY 3C) 6. TOLERANCE OF DIMENSION ARE +0.2/-0.2mm 7. ALL COMPONENT PARTS MUST COMPLY WITH WISTRON STANDARDS (WISTRON DOC No.717-R025) REG LABEL 60X36.5 MM FOR CCX600 NO CD 645.0200F.0001 LBL PN:3810-49775-001 Rev A CCX 600 2201-49770-001 IC : 1849C-CCX6X7XFCC ID : M72-CCX6X7X DHCA

Reference No.: 190904C02-2 Page No. 1 / 21 CONSTRUCTION PHOTOS OF EUT Model: CCX 700 PCB antenna Reference No.: 190904C02-2 Page No. 2 / 21 Reference No.: 190904C02-2 Page No. 3 / 21 Reference No.: 190904C02-2 Page No. 4 / 21 Reference No.: 190904C02-2 Page No. 5 / 21 Reference No.: 190904C02-2 Page No. 6 / 21 Reference No.: 190904C02-2 Page No. 7 / 21 Reference No.: 190904C02-2 Page No. 8 / 21 Reference No.: 190904C02-2 Page No. 9 / 21

Reference No.: 190904C02-2 Page No. 10 / 21 Model: CCX 600 Reference No.: 190904C02-2 Page No. 11 / 21 Reference No.: 190904C02-2 Page No. 12 / 21 PCB antenna Reference No.: 190904C02-2 Page No. 13 / 21 Reference No.: 190904C02-2 Page No. 14 / 21 Reference No.: 190904C02-2 Page No. 15 / 21 Reference No.: 190904C02-2 Page No. 16 / 21 Reference No.: 190904C02-2 Page No. 17 / 21 Reference No.: 190904C02-2 Page No. 18 / 21 Reference No.: 190904C02-2 Page No. 19 / 21 Reference No.: 190904C02-2 Page No. 20 / 21 Reference No.: 190904C02-2 Page No. 21 / 21

Report No.: SA190904C02 Page No. 1 / 5 Report Format Version: 6.1.1 RF Exposure Report Report No.: SA190904C02 FCC ID: M72-CCX6X7X Test Model: CCX 700 Series Model: CCX 600 Received Date: Sep. 04, 2019 Test Date: Sep. 26 ~ Nov. 12, 2019 Issued Date: Nov. 18, 2019 Applicant: Polycom Inc. Address: 6001 America Center Drive, San Jose, CA.95002 USA Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location: No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, TAIWAN FCC Registration / Designation Number: 788550 / TW0003 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: SA190904C02 Page No. 2 / 5 Report Format Version: 6.1.1 Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 RF Exposure .......................................................................................................................................... 5 2.1 Limits for Maximum Permissible Exposure (MPE) .............................................................................. 5 2.2 MPE Calculation Formula ................................................................................................................... 5 2.3 Classification ....................................................................................................................................... 5 3 Calculation Result of Maximum Conducted Power ........................................................................... 5 Report No.: SA190904C02 Page No. 3 / 5 Report Format Version: 6.1.1 Release Control Record Issue No. Description Date Issued SA190904C02 Original release. Nov. 18, 2019 Report No.: SA190904C02 Page No. 4 / 5 Report Format Version: 6.1.1 1 Certificate of Conformity Product: Poly Executive Brand: Poly Test Model: CCX 700 Series Model: CCX 600 Sample Status: Engineering sample Applicant: Polycom Inc. Test Date: Sep. 26 ~ Nov. 12, 2019 Standards: FCC Part 2 (Section 2.1091) References Test Guidance: KDB 447498 D01 General RF Exposure Guidance v06 IEEE C95.3 -2002 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s RF characteristics under the conditions specified in this report. Prepared by : , Date: Nov. 18, 2019 Polly Chien / Specialist Approved by : , Date: Nov. 18, 2019 Bruce Chen / Senior Project Engineer Report No.: SA190904C02 Page No. 5 / 5 Report Format Version: 6.1.1 2 RF Exposure 2.1 Limits for Maximum Permissible Exposure (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Average Time (minutes) Limits For General Population / Uncontrolled Exposure 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f 2 )* 30 30-300 27.5 0.073 0.2 30 300-1500 ... ... f/1500 30 1500-100,000 ... ... 1.0 30 f = Frequency in MHz; *Plane-wave equivalent power density 2.2 MPE Calculation Formula Pd = (Pout*G) / (4*pi*r 2 ) where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale pi = 3.1416 r = distance between observation point and center of the radiator in cm 2.3 Classification The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. 3 Calculation Result of Maximum Conducted Power Frequency Band (MHz) Max Power (dBm) Antenna Gain (dBi) Distance (cm) Power Density (mW/cm 2 ) Limit (mW/cm 2 ) WLAN 2412~2462 11.93 2.91 20 0.006 1 WLAN 5180~5240 13.41 1.91 20 0.007 1 WLAN 5260~5320 13.13 1.91 20 0.006 1 WLAN 5500~5720 12.11 1.47 20 0.005 1 WLAN 5745~5825 11.03 0.94 20 0.003 1 BT LE 2402~2480 4.92 2.91 20 0.001 1 BT EDR 2402~2480 8.89 2.91 20 0.003 1 *The EUT is not capable of simultaneous transmission. Note: Determining compliance based on the results of the compliance measurement, not taking into account measurement instrumentation uncertainty. ---END---

Report No.: RF190904C02-3 Page No. 1 / 46 Report Format Version: 6.1.1 FCC Test Report Report No.: RF190904C02-3 FCC ID: M72-CCX6X7X Test Model: CCX 700 Series Model: CCX 600 (Refer to item 3.1 for more details) Received Date: Sep. 04, 2019 Test Date: Sep. 19 ~ Oct. 04, 2019 Issued Date: Nov. 04, 2019 Applicant: Polycom Inc. Address: 6001 America Center Drive, San Jose, CA.95002 USA Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location: No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, TAIWAN FCC Registration / Designation Number: 788550 / TW0003 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF190904C02-3 Page No. 2 / 46 Report Format Version: 6.1.1 Table of Contents Release Control Record .................................................................................................................................. 4 1 Certificate of Conformity ...................................................................................................................... 5 2 Summary of Test Results ..................................................................................................................... 6 2.1 Measurement Uncertainty ................................................................................................................... 6 2.2 Modification Record ............................................................................................................................ 6 3 General Information .............................................................................................................................. 7 3.1 General Description of EUT ................................................................................................................ 7 3.2 Description of Test Modes ................................................................................................................... 8 3.2.1 Test Mode Applicability and Tested Channel Detail ............................................................................. 9 3.3 Description of Support Units ............................................................................................................. 10 3.3.1 Configuration of System under Test .................................................................................................. 10 3.4 General Description of Applied Standards and References ............................................................. 10 4 Test Types and Results ....................................................................................................................... 11 4.1 Radiated Emission and Bandedge Measurement .............................................................................. 11 4.1.1 Limits of Radiated Emission and Bandedge Measurement ............................................................... 11 4.1.2 Test Instruments ................................................................................................................................ 12 4.1.3 Test Procedures ................................................................................................................................. 13 4.1.4 Deviation from Test Standard ............................................................................................................ 13 4.1.5 Test Setup .......................................................................................................................................... 14 4.1.6 EUT Operating Conditions ................................................................................................................. 15 4.1.7 Test Results ....................................................................................................................................... 16 4.2 Conducted Emission Measurement .................................................................................................. 26 4.2.1 Limits of Conducted Emission Measurement .................................................................................... 26 4.2.2 Test Instruments ................................................................................................................................ 26 4.2.3 Test Procedures ................................................................................................................................. 27 4.2.4 Deviation from Test Standard .................................................................................................…

Text truncated - open the document above for the full version.

Reference No.: 190904C02 Page No. 1 / 4 PHOTOGRAPHS OF THE TEST CONFIGURATION Radiated Emission Test above 1GHz Reference No.: 190904C02 Page No. 2 / 4 Radiated Emission Test below 1GHz Reference No.: 190904C02 Page No. 3 / 4 Conducted Emission Test Reference No.: 190904C02 Page No. 4 / 4 DFS Test Set UUT as Client without radar detection mode (Radar injected into Master) Master UUT Radar (Radiated) Receiver Antenna to S.A.