M7VTCD588TDMA/AMPS Cellular & PCS Telephone

EXTERNAL PHOTOS FCC ID: M7VTCD588 APPLICANT: PHILIPS CONSUMER COMM. EXTERNAL PHOTOS FCC ID: M7VTCD588 APPLICANT: PHILIPS CONSUMER COMM. EXTERNAL PHOTOS FCC ID: M7VTCD588 APPLICANT: PHILIPS CONSUMER COMM. EXTERNAL PHOTOS FCC ID: M7VTCD588 APPLICANT: PHILIPS CONSUMER COMM.

INTERNAL PHOTOS FCC ID: M7VTCD588 APPLICANT: PHILIPS CONSUMER COMM. INTERNAL PHOTOS FCC ID: M7VTCD588 APPLICANT: PHILIPS CONSUMER COMM. INTERNAL PHOTOS FCC ID: M7VTCD588 APPLICANT: PHILIPS CONSUMER COMM. INTERNAL PHOTOS FCC ID: M7VTCD588 APPLICANT: PHILIPS CONSUMER COMM. INTERNAL PHOTOS FCC ID: M7VTCD588 APPLICANT: PHILIPS CONSUMER COMM. INTERNAL PHOTOS FCC ID: M7VTCD588 APPLICANT: PHILIPS CONSUMER COMM.

PHILIPS CONSUMER COMMUNICATIONS FCC ID: M7VTCD588 INTERNAL PHOTOGRAPHS PHILIPS CONSUMER COMMUNICATIONS FCC ID: M7VTCD588 INTERNAL PHOTOGRAPHS PHILIPS CONSUMER COMMUNICATIONS FCC ID: M7VTCD588 INTERNAL PHOTOGRAPHS PHILIPS CONSUMER COMMUNICATIONS FCC ID: M7VTCD588 INTERNAL PHOTOGRAPHS PHILIPS CONSUMER COMMUNICATIONS FCC ID: M7VTCD588 INTERNAL PHOTOGRAPHS PHILIPS CONSUMER COMMUNICATIONS FCC ID: M7VTCD588 INTERNAL PHOTOGRAPHS PHILIPS CONSUMER COMMUNICATIONS FCC ID: M7VTCD588 INTERNAL PHOTOGRAPHS PHILIPS CONSUMER COMMUNICATIONS FCC ID: M7VTCD588 INTERNAL PHOTOGRAPHS

Intertek Testing Services 05/28/99 Philips Consumer CommunicationsFCC ID: M7VTCD588 Report # J20004218AiFCC Part 2 SAR Evaluation Specific Absorption Rate (SAR) Test Report for Philips Consumer Communications on the TDMA/ AMPS Cellular Phone Model: TCD588 Test Report: J20004218A Date of Report: March 10, 2000 NVLAP Laboratory Code 200201-0 Accred ited for te sting to FCC Parts 15 Tested by:Ollie Moyrong Reviewed by:David Chernomordik All services undertaken are subject to the following general policy: Reports are submitted for exclusive use of the client to whom they are addressed. Their significance is subject to the adequacy and representative character of the samples and to the comprehensiveness of the tests, examinations or surveys made. This report shall not be reproduced except i n full, witho ut written co nse nt o f Interte k Tes ting Services, NA Inc. This report mus t not be used to claim product endorsement by NVLAP, NIST nor any other agency of the U.S. Government. Intertek Testing Services 05/28/99 Philips Consumer CommunicationsFCC ID: M7VTCD588 Report # J20004218AiiFCC Part 2 SAR Evaluation Table of Contents 1JOB DESCRIPTION................................................................................................................. 1 1.1Client Information ................................................................................................................ 1 1.2Equipment under test (EUT)..................................................................................................1 1.3Test plan reference................................................................................................................ 2 1.4System test configuration ...................................................................................................... 2 1.4.1System block diagram & Support equipment.................................................................... 2 1.4.2Test Position.................................................................................................................. 3 1.4.3Test Condition............................................................................................................... 3 1.5Modifications required for compliance ................................................................................... 4 1.6Additions, deviations and exclusions from standards............................................................... 4 2SAR EVALUATION .................................................................................................................5 2.1SAR Limits .......................................................................................................................... 5 2.2Configuration Photographs ....................................................................................................6 2.3System Verification ............................................................................................................ 11 2.4Evaluation Procedures......................................................................................................... 11 2.5Test Results ....................................................................................................................... 12 3.1 TEST EQUIPMENT ................................................................................................................15 3.2Equipment List................................................................................................................... 15 3.2Brain Tissue Simulating Liquid ........................................................................................... 16 3.3E-Field Probe Calibration....................................................................................................16 3.4Measurement Uncertainty.................................................................................................... 17 3.5Measurement Traceability................................................................................................... 17 4.0 WARNING LABEL INFORMATION - USA...........................................................................18 5.0 REFERENCES.........................................................................................................................19 APPENDIX A - SAR EVALUATION DATA..................................................................................20 APPENDIX B - E-FIELD PROBE CALIBRATION DATA............................................................40 Intertek Testing Services 05/28/99 Philips Consumer CommunicationsFCC ID: M7VTCD588 Report # J20004218A1FCC Part 2 SAR Evaluation 1 JOB DESCRIPTION 1.1 Client Information The EUT has been tested at the request of Company: Philips Consumer Communications 1000 West Maude Avenue Sunnyvale, California 94086-2810 Name of contact: Yaron-O ren Pi nes US Telephone: (408) 617-5960 US Fax: (408) 617-5960 1.2 Equipment under test (EUT) Product Descriptions: Equipment AMPS/TDMA Cellular Radio Telephone Trade Name Philips Model No.TCD588 FCC ID M7VTCD588 S/N No. Not Labeled CategoryPortableRF Exposure Uncontrolled Environment Frequency Band (uplink) AMPS: 824-849 MHz TDMA: 1850-1909.9 MHz SystemAMPS TDMA EUT Antenna Description TypeMonopoleConfigurationFixed Dime nsio ns 22 mm ( L)Gain0 LocationRight, Top Use of Product : Voice communications Manufacturer: SAME as above. Production is planned: [X] Yes, [ ] No EUT receive date: 3/7/99 EUT received condition: Good condition prototype Test start date: 3/7/00 Test end date: 3/9/00 Intertek Testing Services 05/28/99 Philips Consumer CommunicationsFCC ID: M7VTCD588 Report # J20004218A2FCC Part 2 SAR Evaluation 1.3 Test plan reference FCC rule part 2.1093, FCC Docket 96-326 & Supplement C to OET Bulletin 65 1.4 System test configuration 1.4.1 System block diagram & Support equipment The diagram shown below details test configuration of the equipment under test . S: Shielded U: Unshielded F: With Ferrite Core Support equipment Equp. …

Text truncated - open the document above for the full version.

June 1, 2000 Federal Communications Commission Equipment Authorization Division Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21046 Attention: Mr. Joe Dichoso Reference: Application for Philips Consumer Communications, FCC ID: M7VTCD588 Confirmation # EA97224, Reference # 13587 Dear Joe: This in response to your letter of 4/21/00, Reference # 13587 for FCC ID: M7VTCD588, Confirmation # EA97224. 1. Confirmed 575 mW ERP for AMPS and 454 mW EIRP for PCS 2. Please disregard the back side touching position plots, these are for reference only. The carry case/belt-clip are all non metallic except small spring, only one belt-clip holster was used for this application. 3. Retested the unit and was transmitted at CW model, see additional plots. 4. The small battery page was used, the large battery have more thickness, it should make more distance from phone to body. The large battery is not available at this time. 5. Resubmit set up photos, see attached. 6. This was a typo, the title for Plot # 1 should be Philips Ozeo 7. The SAR test was done in CW mode. 8 Provided by client (see attached SAR Compliance statement) 9 We only used one belt-clip/holster for this application. 10. Rescanned plots as requested, see attached. Should you have any questions, please contact the undersigned. Sincerely, Xi-Ming Yang Test Engineer XY/gcl

SAR PLOTS SAR PLOTS SAR PLOTS SAR PLOTS SAR PLOTS SAR PLOTS SAR PLOTS SAR PLOTS SAR PLOTS SAR PLOTS SAR PLOTS SAR PLOTS SAR PLOTS SAR PLOTS SAR PLOTS SAR PLOTS SAR PLOTS SAR PLOTS SAR PLOTS

Intertek Testing Services 05/28/99 Philips Consumer CommunicationsFCC ID: M7VTCD588 CONFIGURATION PHOTOGRAPHS Worst-Case SAR Measurement Report # J20004218A1FCC Part 2 SAR Evaluation Intertek Testing Services 05/28/99 Philips Consumer CommunicationsFCC ID: M7VTCD588 CONFIGURATION PHOTOGRAPHS Worst-Case SAR Measurement Report # J20004218A2FCC Part 2 SAR Evaluation Intertek Testing Services 05/28/99 Philips Consumer CommunicationsFCC ID: M7VTCD588 CONFIGURATION PHOTOGRAPHS Worst-Case SAR Measurement Report # J20004218A3FCC Part 2 SAR Evaluation Intertek Testing Services 05/28/99 Philips Consumer CommunicationsFCC ID: M7VTCD588 CONFIGURATION PHOTOGRAPHS Worst-Case SAR Measurement Report # J20004218A4FCC Part 2 SAR Evaluation Intertek Testing Services 05/28/99 Philips Consumer CommunicationsFCC ID: M7VTCD588 CONFIGURATION PHOTOGRAPHS Worst-Case SAR Measurement Report # J20004218A5FCC Part 2 SAR Evaluation Intertek Testing Services 05/28/99 Philips Consumer CommunicationsFCC ID: M7VTCD588 CONFIGURATION PHOTOGRAPHS Worst-Case SAR Measurement Report # J20004218A6FCC Part 2 SAR Evaluation Intertek Testing Services 05/28/99 Philips Consumer CommunicationsFCC ID: M7VTCD588 CONFIGURATION PHOTOGRAPHS Worst-Case SAR Measurement Report # J20004218A7FCC Part 2 SAR Evaluation Intertek Testing Services 05/28/99 Philips Consumer CommunicationsFCC ID: M7VTCD588 CONFIGURATION PHOTOGRAPHS Worst-Case SAR Measurement Report # J20004218A8FCC Part 2 SAR Evaluation Intertek Testing Services 05/28/99 Philips Consumer CommunicationsFCC ID: M7VTCD588 CONFIGURATION PHOTOGRAPHS Worst-Case SAR Measurement Report # J20004218A9FCC Part 2 SAR Evaluation Intertek Testing Services 05/28/99 Philips Consumer CommunicationsFCC ID: M7VTCD588 CONFIGURATION PHOTOGRAPHS Worst-Case SAR Measurement Report # J20004218A10FCC Part 2 SAR Evaluation

Intertek Testing Services Philips, OZEODate of Test: 7/07-27/00 Report # 201786738FCC Part 2 SAR Evaluation 2.2 Configuration Photographs Worst-Case SAR measurement Intertek Testing Services Philips, OZEODate of Test: 7/07-27/00 Report # 201786739FCC Part 2 SAR Evaluation 2.2Configuration Photographs – Continued Worst-Case SAR Measurement

11 T Please review the following important safety information prior to using your new phone. Secure Practices Careless handling of your wireless phone can result in harm to others and damage to the phone. To avoid such problems we recommend the following secure practices: • Keep your phone in a safe place and keep it out of small children’s reach. • Switch off the phone if you are going to leave it unused for a long time. • Change the security code after purchasing the phone and to activate call restriction options. Radio Frequency (RF) Signals THIS WIRELESS PHONE MEETS THE GOVERNMENT'S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. The Ozeo is a hand held portable wireless phone using a radio transmitter and receiver. When powered on, it is continuously sending and receiving radio frequency signals. RF signals sent and received are in the range of 800MHz to 1900MHz (varying between 0.01 watt and 2 watts). This phone is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg(1). Tests for SAR are conducted using standard operating positions specified by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. 1.In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in measurements. Before a phone model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government-adopted requirement for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each model. The highest SAR value for this model Safety Information Precautions 12 T phone when tested for use at the ear is ____and when worn on the body, as described in this user guide, is____. (Body-worn measurements differ among phone models, depending upon available accessories and FCC requirements). [Labeling Committee note: if applicable, if body- worn SARs are required]. While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement for safe exposure. The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF emission guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/fccid after searching on FCC ID XXX XXXX. Additional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications Industry Association (CTIA) web-site at http://www.wow-com.com. This device has been tested for body-worn RF exposure compliance using Philips belt-clip/holster accessories (see “Accessories” on page 57). This device complies with FCC Radio Frequency exposure requirements for body-worn operating configurations when used with the Philips belt-clip holster accessory. Other belt-clips, holsters, and similar accessories that have not been tested for body- worn exposure conditions may not comply with FCC RF exposure requirements and should not be used. Battery Safety For your safety and for optimal battery performance we recommend you use only batteries specified in your phone manufacturer’s catalogue. The use of any other accessories makes all guarantees null and void. Your phone manufacturer will not be held liable for any damage resulting from the use of accessories, other than your phone manufacturer’s accessories, with your phone. See “Warranty Disclaimer/Limitation of Liability” on page 60. Vehicle Safety Adhere to all laws and regulations applying to the user of hand-held telephone while driving a vehicle. If possible park your vehicle first before making or receiving a call. For safe phone use while operating a vehicle we recommend purchase and installation of the Ozeo Compact Car Kit accessory. See “Accessories” on page 57. Always remember to give your full attention to the driving task. Road safety is your first responsibility. Precautions 13 T Efficient Use Using your phone in the most efficient manner will improve the performance of your phone, reduce radio energy emission, and reduce battery consumption. For your safety and for the optimal operation of the phone, we recommend the following safety practices: •Use your phone only in the normal operating position: extend the antenna fully so it is up and over your shoulder while holding the ear piece to your ear. •For best performance, avoid touching the antenna while a call is in progress. •Do not use your phone with a damaged or modified antenna. If you touch a damaged antenna, you may suffer a minor skin burn. Have a damaged antenna replaced by a qualified technicia…

Text truncated - open the document above for the full version.

57 T “When Performance Counts... Philips Authentic Accessories are Designed to Maximize the Performance of Your Philips Phone.” To maximize the performance of your phone and maintain manufacturer warranty, always purchase Philips Authentic Accessories designed for use with your phone. Philips Consumer Communications cannot be held liable for any damage due to use with non authorized accessories. Ask for Philips Authentic Accessories where you purchased your Philips Phone. Philips Standard Battery (Included) Part # 431125875310 (Black) Part # 431125874390 (Blue) 670 mAh A lightweight NiMH power-pack is included with your phone and is compatible with the Philips Belt Clip Holster. Additional batteries are sold separately. Ta l k T i m e • Digital - In digital mode the Philips Standard Battery has up to 168 minutes of talk time.* • Analog - In analog mode the Philips Standard Battery has up to 78 minutes of talk time.* Standby • Digital - In digital mode the Philips Standard Battery has up to 150 hours of standby time. • Analog - In analog mode the Philips Standard Battery has up to 47 hours of standby time. * Actual talk time and standby time may vary depending upon network configuration. This device has been tested for body-worn RF exposure compliance using Philips belt-clip/holster accessory. This device complies with FCC Radio Frequency exposure requirements for body-worn operating configurations when used with the Philips belt-clip holster accessory. Other belt-clips, holsters, and similar accessories that have not been tested for body-worn exposure conditions may not comply with FCC RF exposure requirements and should not be used. Accessories Accessories 58 T Philips Extended Battery (Sold Separately) Part # 431125875240 (Black) Part # 431125875390 (Blue) 1000 mAh A sleek, extended life NiMH power-pack may be purchased for use with your phone and is compatible with the Philips Belt Clip Holster. Ta l k T i m e •Digital - When in digital mode the Philips Extended Battery has up to 250 minutes of talk time*. •Analog - When in analog mode the Philips Extended Battery has up to 120 minutes of talk time*. Standby Digital - When in digital mode the Philips Extended Battery has up to 225 hours of standby time*. Analog - When in Analog mode the Philips Extended Battery has up to 71 hours of standby time*. * Actual talk time and standby time may vary depending upon network configuration. This device has been tested for body-worn RF exposure compliance using Philips belt-clip/holster accessory. This device complies with FCC Radio Frequency exposure requirements for body-worn operating configurations when used with the Philips belt-clip holster accessory. Other belt-clips, holsters, and similar accessories that have not been tested for body-worn exposure conditions may not comply with FCC RF exposure requirements and should not be used. Philip Standard Charger Part # 431125874390 A lightweight and durable AC charger is included with your phone and can be used with all battery options. To use the Philips Standard Charger, plug it into a wall outlet and connect the lead from the charger to the base of your phone. The standard charger will charge a standard battery in less than 4 hours (in most cases) and an extended battery in less than 5 (in most cases). Accessories 59 T Philips Fast Charger Part # 312242721210 The Philips Fast Charger supplies a powerful charge in less than 2 hours (in most cases). This lightweight and durable AC charger can be used with all battery options. To use the Philips Fast Charger, plug it into a wall outlet and connect the lead from the charger to the base of your phone. Cigarette Lighter Adapter Part # 431125874800 12-24 Volts Charge the phone battery from your vehicle battery using the Cigarette Lighter Adapter. A green light indicates the charger is ready for charging (when not charging) or finished charging (if it has been charging). Avoid prolonged charging when the car engine is not running; this may cause the battery of your car to drain. Note also that in some cars the cigarette lighter plug is not provided with electricity if the ignition is not switched on. Philips Basic Headset Part # 431125875140 The Philips Basic Headset provides a flexible and hands-free option for phone use. Accessories 60 T Philips Deluxe Headset Part # 4331125872220 The Philips Deluxe Headset offers the same features as the basic headset plus and in-line answer button as an alternative to keypad answering. Philips Compact Car Kit Part # 431125874460 The Philips Compact Car Kit allows easy hands free phone use while driving. This kit offers high quality mobile sounds and charges the phone battery while in use. Philips Belt Clip Holster Carry Case Part # 433530630010 The Philips Belt Clip Holster Carry Case protects your phone from dust, nicks and scratches. Designed in leather with durable elastic sides this case supports the phone while using the Philips Standard and Extended Batteries. This device complies with FCC Radio Frequency exposure requirements for body-worn operating configurations. Other belt- clips, holsters, and similar accessories that have not been tested for body-worn exposure conditions may not comply with FCC RF exposure requirements and should not be used. AccessoriesAccessories

Intertek Testing Services Philips, OZEO Report # 201786721FCC Part 2 SAR Evaluation APPENDIX A - SAR EVALUATION DATA See attached plots. Intertek Testing Services Philips, OZEO Report # 201786722FCC Part 2 SAR Evaluation Intertek Testing Services Philips, OZEO Report # 201786723FCC Part 2 SAR Evaluation Intertek Testing Services Philips, OZEO Report # 201786724FCC Part 2 SAR Evaluation Intertek Testing Services Philips, OZEO Report # 201786725FCC Part 2 SAR Evaluation Intertek Testing Services Philips, OZEO Report # 201786726FCC Part 2 SAR Evaluation Intertek Testing Services Philips, OZEO Report # 201786727FCC Part 2 SAR Evaluation Intertek Testing Services Philips, OZEO Report # 201786728FCC Part 2 SAR Evaluation Intertek Testing Services Philips, OZEO Report # 201786729FCC Part 2 SAR Evaluation Intertek Testing Services Philips, OZEO Report # 2017867210FCC Part 2 SAR Evaluation Intertek Testing Services Philips, OZEO Report # 2017867211FCC Part 2 SAR Evaluation Intertek Testing Services Philips, OZEO Report # 2017867212FCC Part 2 SAR Evaluation Intertek Testing Services Philips, OZEO Report # 2017867213FCC Part 2 SAR Evaluation Intertek Testing Services Philips, OZEO Report # 2017867214FCC Part 2 SAR Evaluation Intertek Testing Services Philips, OZEO Report # 2017867215FCC Part 2 SAR Evaluation Intertek Testing Services Philips, OZEO Report # 2017867216FCC Part 2 SAR Evaluation Intertek Testing Services Philips, OZEO Report # 2017867217FCC Part 2 SAR Evaluation Intertek Testing Services Philips, OZEO Report # 2017867218FCC Part 2 SAR Evaluation Intertek Testing Services Philips, OZEO Report # 2017867219FCC Part 2 SAR Evaluation Intertek Testing Services Philips, OZEO Report # 2017867220FCC Part 2 SAR Evaluation Intertek Testing Services Philips, OZEO Report # 2017867221FCC Part 2 SAR Evaluation Intertek Testing Services Philips, OZEO Report # 2017867222FCC Part 2 SAR Evaluation Intertek Testing Services Philips, OZEO Report # 2017867223FCC Part 2 SAR Evaluation Intertek Testing Services Philips, OZEO Report # 2017867224FCC Part 2 SAR Evaluation Intertek Testing Services Philips, OZEO Report # 2017867225FCC Part 2 SAR Evaluation

A 1365 Adams Court, Menlo Park, CA 94025 Philips Consumer Communications, TDMA/AMPS Cellular PhoneDate of Test: March 7-9, 2000 FCC ID: M7VTCD588 Report # J20004218FCC Part 22 TEST SETUP CONFIGURATION - RADIATED A 1365 Adams Court, Menlo Park, CA 94025 Philips Consumer Communications, TDMA/AMPS Cellular PhoneDate of Test: March 7-9, 2000 FCC ID: M7VTCD588 Report # J20004218FCC Part 22 TEST SETUP CONFIGURATION - LINE CONDUCTED

PHILIPS CONSUMER COMMUNICATIONS FCC ID: M7VTCD588 TEST SET-UP PHOTOS PHILIPS CONSUMER COMMUNICATIONS FCC ID: M7VTCD588 TEST SET-UP PHOTOS PHILIPS CONSUMER COMMUNICATIONS FCC ID: M7VTCD588 TEST SET-UP PHOTOS