MG3-R34010BLUETOOTH REMOTE CONTROL

Comcast Platco TV Remote 2020 Comcast Quick Start Guide ACTIVATING RF QuickSet This product shall support the following features:  Auto Setup  Manual Setup  Optimized Setup Maps (OSM) The following are descriptions of the Quickset features: Auto Setup: Quickset allows for auto setup of the RCU by identifying devices connected through the HDMI network. The RCU is programmed automatically over the RF link. Manual Setup: Quickset allows for manual selection of a Brand for programming of devices without having to go through Auto Detection and Programming. The RCU is programmed automatically over the RF link. Optimized Setup Maps: OSM assists the user with a UI flow to program a TV or Audio device in the RCU. After the user selects brand through the UI, the RCU software and Quickset allows for the testing of functions and by the user. The RCU is programmed over the RF link after the appropriate feedback is observed by the user. Pairing o Press and hold DIGIT 1 + DIGIT 3 for 1 second o Continuous GREEN led blink until paired or timed out LED Feedback  Pairing o GREEN led blink every 250ms for duration of advertising (10 seconds)  Key Press o RED if not BLE bonded o GREEN if BLE bonded  Factory Reset o 4 RED blinks before reboot  Unbind BLE o 4 blinks if successful o 2 blinks if unsuccessful Features: ‐ UE878NMEH (512K Flash/64K RAM) ‐ BLE ‐ Voice with single digital MEMs microphone ‐ QS Cloud o Same cloud Comcast accesses today, and implemented by Comcast ‐ Tri‐color (RGB) feedback LED for user feedback o Same tri‐color LED used in XR15 and XR16 remotes o Charge pump circuit to support blue color ‐ Option in battery compartment for 10 pin tag connection and 10 pin header o Follow latest Sky EC302 design ‐ Buzzer/Piezo for Remote Finder feature (OWMB‐9045HS‐27‐16) – optional install ‐ SMT IR diode (Paralight L‐S15CAIR1C‐HD/ Bright LED Electronics Corp. BIR‐ HMC33M‐2‐TRCA‐UEI) ‐ PCB: Double Sided, CEM‐1, Carbon Thru Hole, Wet Film ‐ Rubber keypad with carbon ink ‐ ABS plastic housing ‐ PC IR lens ‐ PMMA back printed crystal keys o MIC o HOME ‐ ABS key cap – OK key ‐ ABS key caps ‐ Metal domes – all 30 keys ‐ 2 AAA batteries operation – designed for alkaline ‐ Operating Temperature o 0°C to +50°C Customer Marking Label COMPLIANCE WITH FCC RULES AND REGULATIONS This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase or decrease the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  Consult the dealer or an experienced remote control/ TV technician for help. This equipment has been verified to comply with the limits for a Class B computing device, pursuant to FCC Rules. The user is cautioned that changes and modifications made to the equipment without the approval of manufacturer could void the user's authority to operate this equipment. FCC Authorization Label This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2 This device must accept any interference received, including interference that may cause undesired operation. FCC ID: MG3‐R34010 Mexico “La operación de este equipo está sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operación no deseada.” Canada: This device complies with RSS‐210 of the Industry Canada Rules: Operation is subject to the following two conditions: (1) This deice may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Le présent appareil est confrme aux CNR d’Industrie Canda applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes: (1) L’appareil ne doit pas produire de brouillage; (2) L’utilisateur de l’appareil doit accepter dout brouillage dadioélectrique subi, même si le brouillage est susceptible d’en compromettre de fonctionnement.

201 E. Sandpointe Ave, 7 th Floor, Santa Ana, CA 92707, Tel 714 918-9701, Fax 714 918-4100 February 17, 2021 GMA Labs LLC 7700 Irvine Center Drive #800 Irvine, CA 92618, USA Gentlemen: This is a letter of authorization to accept GMA Labs., specifically including the employees of GMA Labs, as an Agent for Universal Electronics Inc., 201 E. Sandpointe Ave, 7 th Floor, Santa Ana CA 92707 for a period of one year, to sign applications before the Commission on our behalf, to make representations to you on our behalf, and to receive and exchange data between our company and the Commission in connection with certification of the following Universal Electronics Inc., product. Product name: Comcast Platco TV Remote 2020 Part number: R34010BA00-00001 Model Number: 4010 FCC ID: MG3-R34010 under FCC Docket Number 20780 and General Docket Number 80-284 pursuant to Part l5 of FCC Rules and Regulations. Please also accept this letter as an attestation that neither Universal Electronics Inc., nor any of its officers, directors, or persons holding 5% or more of the outstanding stock or shares, voting or non-voting, have been denied federal benefits under section 5301 of the Anti-Drug-Abuse act of 1988,21 U.S.C. 853(a). In addition, Universal Electronics Inc., will notify the Federal Communications Commission if, at any time, the situation changes causing Universal Electronics Inc., to be denied federal benefits. If you have any further questions or need additional information, please feel free to give me a call at 714 918-9701 Sincerely, Jesse Mendez Staff Engineer, Electrical

Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: ________________ Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Type of Confidentiality Requested Exhibit Type ☐Short Term ☐Permanent Block Diagrams ☐Short Term External Photos ☐Short Term ☐Permanent* Internal Photos ☐Short Term ☐Permanent Operation Description ☐Short Term ☐Permanent Parts List/BOM ☐Short Term ☐Permanent Schematics ☐Short Term Test Setup Photos ☐Short Term ☐Permanent* User manual *Requires further justification before permanent confidentiality will be allowed. The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality: Pursuant to DA04-1705 June 15, 2004 of the Commission’s public notice, we also request temporary confidential treatment of information accompanying this application as outlined below for an initial period of ____________ days. Sincerely, Client’s signature: ________________________________ Client’s name & title: _____________________________ Contact information / address:

EUT External-Front EUT External-Back

EUT Internal-Front EUT Internal-Back

Phone: +1 (949) 393-1123 Web: www.vista-compliance.com Email: [email protected] FCC ISED RF Exposure Evaluation Report Test Report Number GLS-21011543-LC-FCC-IC-RF Exposure FCC ID ISED ID MG3-R34010 2575A-R34010 Applicant Universal Electronics Inc. Applicant Address 201 Sandpointe Ave, Santa Ana, CA, 92707 Product Name Comcast Platco TV Remote 2020 Model (s) 4010 Date of Receipt 01/15/2021 Date of Test 01/21/2021-02/12/2021 Report Issue Date 02/24/2021 Test Standards 47 CFR §1.1307(b), 47 CFR §1.1310 RSS-102 Issue 5: March 2015 Test Result PASS Issued by: Vista Compliance Laboratories 1261 Puerta Del Sol, San Clemente, CA 92673 USA www.vista-compliance.com Daniel Bruno (Test Technician) David Zhang (Technical Manager) This report is for the exclusive use of the applicant. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. Note that the results contained in this report pertain only to the test samples identified herein, and the results relate only to the items tested and the results that were obtained in the period between the date of initial receipt of samples and the date of issue of the report. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested and the results thereof based upon the information provided to us. The applicant has 60 days from date of issuance of this report to notify us of any material error or omission. Failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non- compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by any government agencies. This report is not to be reproduced by any means except in full and in any case not without the written approval of Vista Laboratories. REVISION HISTORY Report# GLS-21011543-LC-FCC-IC-RF Exposure Page 2 of 6 Report Number Version Description Issued Date GLS-21011543-LC-FCC-IC-RF Exposure 01 Initial report 02/16/2021 Report# GLS-21011543-LC-FCC-IC-RF Exposure Page 3 of 6 TABLE OF CONTENTS 1 GENERAL INFORMATION ......................................................................................................................... 4 1.1 Applicant .................................................................................................................................................................................... 4 1.2 Product information .............................................................................................................................................................. 4 1.3 Test standard and method .................................................................................................................................................. 4 2 TEST RESULTS ............................................................................................................................................ 5 2.1 FCC SAR Exclusion Calculation .......................................................................................................................................... 5 2.2 ISED RF Exposure Evaluation .............................................................................................................................................. 6 Report# GLS-21011543-LC-FCC-IC-RF Exposure Page 4 of 6 1 General Information 1.1 Applicant Applicant Universal Electronics Inc. Applicant address 201 Sandpointe Ave, Santa Ana, CA, 92707 Manufacturer Universal Electronics Inc. Manufacturer Address 201 Sandpointe Ave, Santa Ana, CA, 92707 1.2 Product information Product Name Comcast Platco TV Remote 2020 Product Description TV Remote Model Number 4010 Family Models N/A Serial Number R34010BA00-00001 Frequency Band 2402-2480MHz Type of modulation GFSK Equipment Class DTS Antenna Information PCB Trace Antenna, 0.23dBi Clock Frequencies N/A Input Power 2x1.5 Volt AAA Batteries (3VDC) Power Adapter Manufacturer/Model N/A Power Adapter SN N/A Hardware version 60441-4243000 A01 Software version 6001.0.4 Simultaneous Transmission N/A Additional Info EUT uses BLE for TV remote control application which belongs to pulsed operation and the duty cycle correction defined in 47cfr15.35 is applicable. Manufacturer declares that the worst-case duty cycle correction factor occurs in the 64 kbit/s voice mode at 1 Mbit/s. The calculated duty cycle correction factor is 17.7 dB. See the application notes of “GP_P905_UM_13440 Version 1.10 - GP570 RF4CE / BLE Communications Controller FCC Certification Guide” and “GP_P905_AN_13659 Version 1.02 - TX Duty Cycle BLE 64 kbit/s Voice GP570, GP870” for reference. 1.3 Test standard and method Test standard 47 CFR §1.1307(b), 47 CFR §1.1310 RSS-102 Issue 5: March 2015 Test method KDB 447498 D01 General RF Exposure Guidance v06 RSS-102 Issue 5: March 2015 Report# GLS-21011543-LC-FCC-IC-RF Exposure Page 5 of 6 2 Test Results 2.1 FCC SAR Exclusion Calculation RF Exposure Requirements: 47 CFR §1.1307(b) RF Radiation Exposure Limits: 47 CFR §1.1310 RF Radiation Exposure Guidelines: FCC OST/OET Bulletin Number 65 EUT Frequency Band: 2402-2480MHz Equation: According to the procedure in KDB447498 (v06) section 4.3, 1g-SAR testing is excluded if the following criteria is met. (P/d)* √f ≤3.0 for 1-g SAR 10g-SAR testing is excluded if the following criteria is met. (P/d)* √f ≤7.5 for 10-g SAR Where P is the time averaged…

Text truncated - open the document above for the full version.

Phone: +1 (949) 393-1123 Web: www.vista-compliance.com Email: [email protected] FCC ISED RF Test Report Test Report Number GLS-21011543-LC-FCC-IC FCC ID ISED ID MG3-R34010 2575A-R34010 Applicant Universal Electronics Inc. Applicant Address 201 Sandpointe Ave, Santa Ana, CA, 92707 Product Name Comcast Platco TV Remote 2020 Model (s) 4010 Date of Receipt 01/15/2021 Date of Test 01/21/2021-02/12/2021 Report Issue Date 02/24/2021 Test Standards 47 CFR Part 15.247 RSS-247 Issue 2, Feb 2017 Test Result PASS Issued by: Vista Compliance Laboratories 1261 Puerta Del Sol, San Clemente, CA 92673 USA www.vista-compliance.com Daniel Bruno (Test Technician) David Zhang (Technical Manager) This report is for the exclusive use of the applicant. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. Note that the results contained in this report pertain only to the test samples identified herein, and the results relate only to the items tested and the results that were obtained in the period between the date of initial receipt of samples and the date of issue of the report. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested and the results thereof based upon the information provided to us. The applicant has 60 days from date of issuance of this report to notify us of any material error or omission. Failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by any government agencies. This report is not to be reproduced by any means except in full and in any case not without the written approval of Vista Laboratories. Report# GLS-21011543-LC-FCC-IC Page 2 of 35 REVISION HISTORY Report Number Version Description Issued Date GLS-21011543-LC-FCC-IC 01 Initial report 02/24/2021 Report# GLS-21011543-LC-FCC-IC Page 3 of 35 TABLE OF CONTENTS 1 TEST SUMMARY ................................................................................................................................... 4 2 GENERAL INFORMATION ................................................................................................................... 5 2.1 Applicant .................................................................................................................................................. 5 2.2 Product information ............................................................................................................................... 5 2.3 Test standard and method .................................................................................................................... 5 3 MODIFICATION OF EUT / DEVIATIONS FROM STANDARDS ............................................................. 6 4 TEST CONFIGURATION AND OPERATION ......................................................................................... 6 4.1 EUT Test Configuration........................................................................................................................... 6 4.2 Supporting Equipment ........................................................................................................................... 6 5 UNCERTAINTY OF MEASUREMENT .................................................................................................... 6 6 TEST RESULTS ...................................................................................................................................... 7 6.1 Antenna Requirement ............................................................................................................................ 7 6.2 DTS (6 dB) Bandwidth ............................................................................................................................. 8 6.3 Occupied Bandwidth (99%) .................................................................................................................. 11 6.4 Maximum Output Power ..................................................................................................................... 14 6.5 Power Spectral Density ........................................................................................................................ 17 6.6 Conducted Band-Edge & Unwanted Emissions Measurement ...................................................... 20 6.7 Radiated Band-Edge & Spurious Emissions into Restricted Frequency Bands ............................ 23 7 EUT AND TEST SETUP PHOTOS ......................................................................................................... 34 8 TEST INSTRUMENT LIST .................................................................................................................... 35 Report# GLS-21011543-LC-FCC-IC Page 4 of 35 1 Test Summary Test Item Test Requirement Test Method Result Antenna Requirement 47 CFR Part 15.247 ANSI C63.10-2013 Pass AC Power Line Conducted Emissions 47 CFR Part 15.247 RSS-247 Issue 2, Feb 2017 ANSI C63.10-2013 RSS-Gen Issue 5, Mar 2019 Pass 99% Occupied Bandwidth RSS-247 Issue 2, Feb 2017 RSS-Gen Issue 5, Mar 2019 Pass DTS (6 dB) Channel Bandwidth 47 CFR Part 15.247 RSS-247 Issue 2, Feb 2017 ANSI C63.10-2013 RSS-Gen Issue 5, Mar 2019 Pass Conducted Maximum Output Power 47 CFR Part 15.247 RSS-247 Issue 2, Feb 2017 ANSI C6…

Text truncated - open the document above for the full version.

Radiated Spurious Emission-Below 1GHz-Back Radiated Spurious Emission-Below 1GHz-Front Radiated Spurious Emission-Above 1GHz-Back Radiated Spurious Emission-Above 1GHz-Front