MXF-WRTQ411BEWi-Fi 7 Tri-Band Router

Certification designating a U.S. Agent for service of process: As required by section 2.911(d)(7), the applicant must designate a contact located in the United States for purposes of a�ting as the applicant's agent for service of process, regardless of whether the applicant is a domestic or foreign entity. An applicant located in the United States may designate itself as the agent for service of process. In either scenario, the designation of the U.S. agent for service of process should be provided as an attachment to the equipment authorization application. The applicant must provide a written certification, which must: i. Be signed by both the applicant and designated agent for service of process, if the agent is different from the applicant ii. Acknowledge the applicant's consent and the designated agent's obligation to accept service of process. iii. Provide a physical U.S. address and email for the designated agent. iv. Acknowledge the applicant's acceptance to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Unofficial information provided by FCC personnel on February 14, 2023, via the monthly call with the TCB Council: The Agent for Process of Service: • cannot be a TCB or affiliated with a TCB ( e.g. could not be a person who works for a TCB or a company that owns or is owned by the TCB) • cannot be a [FCC recognised] Lab or affiliated with a test lab (e.g. could not be a person who works for a Lab or a company that owns or is owned by the Lab) • Agent can be Individual Entity or a Company Entity • Agent Entity must be located in US, US address/phone • Entity acting as Agent must have FRN (best practice, put FRN on Agent Letter) • Agent letter does not have to be FCC ID specific, can be general Agent for Grantee For devices being marketed or for which marketing has ceased for less than 1 year, if the Agent for Process of Service changes, then for every TC Number the TCB must request the FCC to put application into Audit Mode and Agent Letter needs to be updated (superseded). The U.S. Agent for Service of Process should not be confused with the authorized agent used for signing the 731 form, other cover letters within the application, and/or the agent who may interface with theTCB. Gemtek Wireless Broadband Anywhere No.15-1 Zhonghua Road, Hsinchu Industrial Park Hukou, Hsinchu, Taiwan 303 Web Site: www.gemtek.com.tw Phone: +886-3-598-5535 E-Mail: [email protected] FAX: +886-3-598-5585 ATTENTION: U.S. Agent Designation for Service of Process Federal Communications Commission Authorization and Evaluation Division 7 43 5 Oakland Mills Road Columbia, MD 21046 USA REGARDING: FCC Certification- Section 2.91 l(d)(7) Information Designated U.S. Agent Company Name: Approve-IT, Inc. Contact Name: Nathan Grinager Street Address: 8011 34 th Ave South, Suite 342 City/Province/Zip: Bloomington, MN 5 5425 T elephone No: 651-247-1678 Email: [email protected] FRN #: 0027533835· This letter is to confirm that we ("the Designated U.S. Agent) have accepted the responsibility to act as the Designated U.S. Agent for Se rvice of Process as required by section 47 CFR 2.91 l(d)(7) on behalf of the Applicant noted below. U.S. Agent Signature: Date: August 18, 2025 Signed by (Printed Name/Title): Nathan Grinager/ Co-President The Applicant confirms its explicit consent and acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Compan name: Gemtek Technology Co., Ltd. F; 0005801899 Contact Name: Adam Wang Street Address: No.15-1 Zhonghua Road, Hsinchu Industrial Park City/Province/Zip: Hukou, Hsinchu, Taiwan 303 Telephone No: 886 3-598-5535*1411 Email: [email protected] Applicant Signature: � J /7 ,-, � 4 Date: Signed by (Printed Name/Title): Adam Wang/ Manager U.S. Agent for Service of Process -Terms & Conditions Prepared by: Nathan Grinager Co-President 8011 34th Ave. South, Suite 342 Bloomington, MN, 55425, USA Tel: 651-247-1678 Fax: 651-644-6057 1.0 Introduction: These Terms and Conditions are incorporated into the Approve-IT proposal made and submitted to you. The party executing this document ("Client") indicates acceptance of this proposal and that it is agreed that a resulting contract exists between Client and Approve-IT that governs the performance of the stated services and the rights and obligations of the parties and that Approve-IT may proceed with the work. 2.0 Approve-IT Services Relating to 2.911 Application Requirements: As required by the Application Requirements under Section 2.91 l(d)(7), the applicant must designate a contact located in the United States for purposes of acting as the applicant's agent for service of process. Section 2. 911 ( d)(7) reads as follows: (7) The applicant shall designate an agent located in the United States for the purpose of accepting service of process on behalf of the applicant. (i) The applicant shall provide a written certification; (A) Signed by both the applicant and its designated agent for service of process, if different from the applicant; (BJ Acknowledging the applicant's consent and the designated agent's obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical US. address and email address of its designated agent; and (C) Acknowledging the applicant's acceptance of its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the US., or the conclusion of any Commission-related administrative o…

Text truncated - open the document above for the full version.

Label location Back Side Bottom Side

Report No.: FA613001 Page : 1 of 7 Report Version: Rev. 01 FCC RF Exposure Report FCC ID : MXF-WRTQ411BE Equipment : Wi-Fi 7 Tri-Band Router Model No. : WRTQ-411BE Brand Name : Gemtek Applicant : Gemtek Technology Co., Ltd. Address : No. 15-1 Zhonghua Road, Hsinchu Industrial Park, Hukou, Hsinchu, Taiwan, 30352. Standard : 47 CFR FCC Part 2.1091 Received Date : Jan. 30, 2026 Tested Date : Feb. 27 ~ Apr. 15, 2026 We, International Certification Corporation, would like to declare that the tested sample has been evaluated and in compliance with the requirement of the above standards. The test results contained in this report refer exclusively to the product. It shall not be reproduced except in full without the written approval of our laboratory. Reviewed by: Approved by: Along Chen / Manager Gary Chang / Manager Report No.: FA613001 Page : 2 of 7 Report Version: Rev. 01 Table of Contents 1 MPE EVALUATION OF MOBILE DEVICES ......................................................................................... 4 1.1 LIMITS FOR GENERAL POPULATION/UNCONTROLLED EXPOSURE............................................. 4 1.2 MPE EVALUATION FORMULA ............................................................................................................. 4 1.3 REFERENCE GUIDANCE ..................................................................................................................... 4 1.4 DEVIATION FROM TEST STANDARD AND MEASUREMENT PROCEDURE ................................... 4 1.5 MEASUREMENT UNCERTAINTY ......................................................................................................... 4 1.6 MPE EVALUATION RESULTS .............................................................................................................. 5 1.7 MPE EVALUATION OF SIMULTANEOUS TRANSMISSION ................................................................ 6 2 TEST LABORATORY INFORMATION ................................................................................................. 7 Report No.: FA613001 Page : 3 of 7 Report Version: Rev. 01 Release Record Report No. Version Description Issued Date FA613001 Rev. 01 Initial issue May 11, 2026 Report No.: FA613001 Page : 4 of 7 Report Version: Rev. 01 1 MPE EVALUATION OF MOBILE DEVICES 1.1 LIMITS FOR GENERAL POPULATION/UNCONTROLLED EXPOSURE Frequency Range (MHz) Power Density (mW /cm 2 ) Averaging Time (minutes) 300~1500 F/1500 30 1500~100000 1.0 30 1.2 MPE EVALUATION FORMULA Pd = 2 * * 4 R Pi Pt Where Pd= Power density in mW/cm 2 Pt= EIRP in mW Pi= 3.1416 R= Measurement distance 1.3 REFERENCE GUIDANCE 447498 D01 General RF Exposure Guidance v06 1.4 DEVIATION FROM TEST STANDARD AND MEASUREMENT PROCEDURE None 1.5 MEASUREMENT UNCERTAINTY The measurement uncertainties given below are based on a 95% confidence level (based on a coverage factor (k=2)). Parameters Uncertainty Conducted power ±0.808 dB Declaration of Conformity: The test results with all measurement uncertainty excluded are presented in accordance with the regulation limits or requirements declared by manufacturers. Comments and Explanations: The declared of product specification for EUT presented in the report are provided by the manufacturer, and the manufacturer takes all the responsibilities for the accuracy of product specification. Report No.: FA613001 Page : 5 of 7 Report Version: Rev. 01 1.6 MPE EVALUATION RESULTS Non-beamforming mode Frequency Range (MHz) Maximum Conducted Power (dBm) Maximum Tune Up Limit (dBm) Antenna Gain (dBi) Distance (cm) Power Density (mW/cm 2 ) Limit (mW/cm 2 ) *Ratio Pass / Fail 2412-2462 29.83 30 2.33 22 0.281 1 0.281 Pass 5180-5240 25.75 26 2.76 22 0.124 1 0.124 Pass 5260-5320 23.89 24 2.84 22 0.079 1 0.079 Pass 5500-5720 23.88 24 2.97 22 0.082 1 0.082 Pass 5745-5825 29.40 29.50 2.92 22 0.287 1 0.287 Pass 5925-6425 24.71 25 2.62 22 0.095 1 0.095 Pass 6425-6525 24.76 25 2.63 22 0.095 1 0.095 Pass 6525-6875 21.69 22 2.57 22 0.047 1 0.047 Pass 6875-7125 24.76 25 2.59 22 0.094 1 0.094 Pass Beamforming mode Frequency Range (MHz) Maximum Conducted Power (dBm) Maximum Tune Up Limit (dBm) Antenna Gain (dBi) Distance (cm) Power Density (mW/cm 2 ) Limit (mW/cm 2 ) *Ratio Pass / Fail 2412-2462 27.47 27.5 4.39 22 0.254 1 0.254 Pass 5180-5240 22.73 23 5.78 22 0.124 1 0.124 Pass 5260-5320 20.82 21 5.91 22 0.081 1 0.081 Pass 5500-5720 21.12 21.5 5.73 22 0.087 1 0.087 Pass 5745-5825 26.99 27 5.32 22 0.281 1 0.281 Pass 5925-6425 21.49 21.5 5.84 22 0.089 1 0.089 Pass 6425-6525 21.51 22 5.88 22 0.101 1 0.101 Pass 6525-6875 18.52 19 5.74 22 0.049 1 0.049 Pass 6875-7125 21.56 22 5.79 22 0.099 1 0.099 Pass Report No.: FA613001 Page : 6 of 7 Report Version: Rev. 01 1.7 MPE EVALUATION OF SIMULTANEOUS TRANSMISSION Non-beamforming mode Mode Max Ratio of Each Mode 2.4 GHz Wi-Fi 0.281 5 GHz Wi-Fi 0.287 6 GHz Wi-Fi 0.095 Sum 0.663 Limit 1 Pass / Fail Pass Beamforming mode Mode Max Ratio of Each Mode 2.4 GHz Wi-Fi 0.254 5 GHz Wi-Fi 0.281 6 GHz Wi-Fi 0.101 Sum 0.636 Limit 1 Pass / Fail Pass Report No.: FA613001 Page : 7 of 7 Report Version: Rev. 01 2 Test laboratory information Established in 2012, ICC provides foremost EMC & RF Testing and advisory consultation services by our skilled engineers and technicians. Our services employ a wide variety of advanced edge test equipment and one of the widest certification extents in the business. International Certification Corporation (EMC and Wireless Communication Laboratory), it is our definitive objective is to institute long term, trust-based associations with our clients. The expectation we set up with our clients is based on outstanding service, practical expertise and devotion to a certified value structure. Our passion is to grant our clients with best EMC / RF services by oriented knowledgeable and accommodating staff. Our Test sites are located at Linkou District and Kwei Shan District. Location map can be found on our website https://www.icertifi.com.tw. Linkou Kwei Shan Kwei Shan Site II Tel: 886-2-2601-1640 …

Text truncated - open the document above for the full version.

Report No.: FR613001AO Page : 1 of 30 Report Version: Rev. 01 FCC Test Report FCC ID : MXF-WRTQ411BE Equipment : Wi-Fi 7 Tri-Band Router Model No. : WRTQ-411BE Brand Name : Gemtek Applicant : Gemtek Technology Co., Ltd. Address : No. 15-1 Zhonghua Road, Hsinchu Industrial Park, Hukou, Hsinchu, Taiwan, 30352. Standard : 47 CFR FCC Part 15.407 Equipment Class / Type : 6ID: Indoor access point 6PP: Subordinate device 6XD: Client device Received Date : Jan. 30, 2026 Tested Date : Mar. 16 ~ Apr. 15, 2026 We, International Certification Corporation, would like to declare that the tested sample has been evaluated and in compliance with the requirement of the above standards. The test results contained in this report refer exclusively to the product. It shall not be reproduced except in full without the written approval of our laboratory. Reviewed by: Approved by: Along Chen / Manager Gary Chang / Manager Report No.: FR613001AO Page : 2 of 30 Report Version: Rev. 01 Table of Contents 1 GENERAL DESCRIPTION .................................................................................................................... 5 1.1 Information.............................................................................................................................................. 5 1.2 Local Support Equipment List .............................................................................................................. 11 1.3 Test Setup Chart .................................................................................................................................. 11 1.4 The Equipment List .............................................................................................................................. 12 1.5 Test Standards ..................................................................................................................................... 14 1.6 Reference Guidance ............................................................................................................................ 14 1.7 Deviation from Test Standard and Measurement Procedure ............................................................... 14 1.8 Measurement Uncertainty .................................................................................................................... 14 2 TEST CONFIGURATION ..................................................................................................................... 15 2.1 Testing Facility ..................................................................................................................................... 15 2.2 Test Worst Modes and Channel Details ............................................................................................... 16 3 TRANSMITTER TEST RESULTS ....................................................................................................... 18 3.1 Emission Bandwidth ............................................................................................................................. 18 3.2 RF Output Power .................................................................................................................................. 19 3.3 Power Spectral Density ........................................................................................................................ 20 3.4 Unwanted Emissions ............................................................................................................................ 21 3.5 In-Band Emissions ............................................................................................................................... 24 3.6 Frequency Stability ............................................................................................................................... 26 3.7 Contention Based Protocol ................................................................................................................... 27 3.8 AC Power Line Conducted Emissions ................................................................................................. 29 4 TEST LABORATORY INFORMATION ............................................................................................... 30 Appendix A. Emission Bandwidth Appendix B. RF Output Power Appendix C. Power Spectral Density Appendix D. Unwanted Emissions Appendix E. In-Band Emissions Appendix F. Frequency Stability Appendix G. Contention Based Protocol Appendix H. AC Power Line Conducted Emissions Report No.: FR613001AO Page : 3 of 30 Report Version: Rev. 01 Release Record Report No. Version Description Issued Date FR613001AO Rev. 01 Initial issue May 11, 2026 Report No.: FR613001AO Page : 4 of 30 Report Version: Rev. 01 Summary of Test Results FCC Rules Test Items Measured Result 15.207 AC Power Line Conducted Emissions [dBuV]: 0.150MHz 53.76 (Margin -12.24dB) - QP Pass 15.407(b)(5) 15.209 Unwanted Emission [dBuV/m at 3m]: 7250.00MHz 53.79 (Margin -0.21dB) - AV Pass 15.407(b)(6) In-Band Emissions (Mask) Meet the requirement of limit Pass 15.407(a)(10) Emission Bandwidth Meet the requirement of limit Pass 15.407(a)(5) RF Output Power (e.i.r.p) Max Power [dBm]: Non-beamforming mode 5925-6425MHz: 27.33 6425-6525MHz: 27.39 6525-6875MHz: 24.26 6875-7125MHz: 27.35 Beamforming mode 5925-6425MHz: 27.33 6425-6525MHz: 27.39 6525-6875MHz: 24.26 6875-7125MHz: 27.35 Pass 15.407(a)(5) Power Spectral Density (e.i.r.p) Meet the requirement of limit Pass 15.407(d)(6) Contention Based Protocol Meet the requirement of limit Pass 15.407(g) Frequency Stability Meet the requirement of limit Pass 15.203 Antenna Requirement Meet the requirement of limit Pass Declaration of Conformity: The test results with all measurement uncertainty excluded are presented in accordance with the regulation limits or requirements declared by manufacturers. Comments and Explanations: The declared of product specification for EUT presented in the report are provided by the manufacturer, and the manufactur…

Text truncated - open the document above for the full version.

Band Edge measurement Appendix D Report No.: FR613001AO Page No. : 12 of 60 Modulation 11a Test Freq. (MHz) 7115 Polarization Vertical-Average Band Edge measurement Appendix D Report No.: FR613001AO Page No. : 13 of 60 Modulation 11be EHT20_OFDMA Test Freq. (MHz) 5955 Polarization Horizontal-Peak Band Edge measurement Appendix D Report No.: FR613001AO Page No. : 14 of 60 Modulation 11be EHT20_OFDMA Test Freq. (MHz) 5955 Polarization Horizontal-Average Band Edge measurement Appendix D Report No.: FR613001AO Page No. : 15 of 60 Modulation 11be EHT20_OFDMA Test Freq. (MHz) 5955 Polarization Vertical-Peak Band Edge measurement Appendix D Report No.: FR613001AO Page No. : 16 of 60 Modulation 11be EHT20_OFDMA Test Freq. (MHz) 5955 Polarization Vertical-Average Band Edge measurement Appendix D Report No.: FR613001AO Page No. : 17 of 60 Modulation 11be EHT20_OFDMA Test Freq. (MHz) 7095 Polarization Horizontal-Peak Band Edge measurement Appendix D Report No.: FR613001AO Page No. : 18 of 60 Modulation 11be EHT20_OFDMA Test Freq. (MHz) 7095 Polarization Horizontal-Average Band Edge measurement Appendix D Report No.: FR613001AO Page No. : 19 of 60 Modulation 11be EHT20_OFDMA Test Freq. (MHz) 7095 Polarization Vertical-Peak Band Edge measurement Appendix D Report No.: FR613001AO Page No. : 20 of 60 Modulation 11be EHT20_OFDMA Test Freq. (MHz) 7095 Polarization Vertical-Average Band Edge measurement Appendix D Report No.: FR613001AO Page No. : 21 of 60 Modulation 11be EHT20_OFDMA Test Freq. (MHz) 7115 Polarization Horizontal-Peak Band Edge measurement Appendix D Report No.: FR613001AO Page No. : 22 of 60 Modulation 11be EHT20_OFDMA Test Freq. (MHz) 7115 Polarization Horizontal-Average Band Edge measurement Appendix D Report No.: FR613001AO Page No. : 23 of 60 Modulation 11be EHT20_OFDMA Test Freq. (MHz) 7115 Polarization Vertical-Peak Band Edge measurement Appendix D Report No.: FR613001AO Page No. : 24 of 60 Modulation 11be EHT20_OFDMA Test Freq. (MHz) 7115 Polarization Vertical-Average Band Edge measurement Appendix D Report No.: FR613001AO Page No. : 25 of 60 Modulation 11be EHT40_OFDMA Test Freq. (MHz) 5965 Polarization Horizontal-Peak Band Edge measurement Appendix D Report No.: FR613001AO Page No. : 26 of 60 Modulation 11be EHT40_OFDMA Test Freq. (MHz) 5965 Polarization Horizontal-Average Band Edge measurement Appendix D Report No.: FR613001AO Page No. : 27 of 60 Modulation 11be EHT40_OFDMA Test Freq. (MHz) 5965 Polarization Vertical-Peak Band Edge measurement Appendix D Report No.: FR613001AO Page No. : 28 of 60 Modulation 11be EHT40_OFDMA Test Freq. (MHz) 5965 Polarization Vertical-Average Band Edge measurement Appendix D Report No.: FR613001AO Page No. : 29 of 60 Modulation 11be EHT40_OFDMA Test Freq. (MHz) 7085 Polarization Horizontal-Peak Band Edge measurement Appendix D Report No.: FR613001AO Page No. : 30 of 60 Modulation 11be EHT40_OFDMA Test Freq. (MHz) 7085 Polarization Horizontal-Average Band Edge measurement Appendix D Report No.: FR613001AO Page No. : 31 of 60 Modulation 11be EHT40_OFDMA Test Freq. (MHz) 7085 Polarization Vertical-Peak Band Edge measurement Appendix D Report No.: FR613001AO Page No. : 32 of 60 Modulation 11be EHT40_OFDMA Test Freq. (MHz) 7085 Polarization Vertical-Average Band Edge measurement Appendix D Report No.: FR613001AO Page No. : 33 of 60 Modulation 11be EHT80_OFDMA Test Freq. (MHz) 5985 Polarization Horizontal-Peak Band Edge measurement Appendix D Report No.: FR613001AO Page No. : 34 of 60 Modulation 11be EHT80_OFDMA Test Freq. (MHz) 5985 Polarization Horizontal-Average Band Edge measurement Appendix D Report No.: FR613001AO Page No. : 35 of 60 Modulation 11be EHT80_OFDMA Test Freq. (MHz) 5985 Polarization Vertical-Peak Band Edge measurement Appendix D Report No.: FR613001AO Page No. : 36 of 60 Modulation 11be EHT80_OFDMA Test Freq. (MHz) 5985 Polarization Vertical-Average Band Edge measurement Appendix D Report No.: FR613001AO Page No. : 37 of 60 Modulation 11be EHT80_OFDMA Test Freq. (MHz) 7025 Polarization Horizontal-Peak Band Edge measurement Appendix D Report No.: FR613001AO Page No. : 38 of 60 Modulation 11be EHT80_OFDMA Test Freq. (MHz) 7025 Polarization Horizontal-Average Band Edge measurement Appendix D Report No.: FR613001AO Page No. : 39 of 60 Modulation 11be EHT80_OFDMA Test Freq. (MHz) 7025 Polarization Vertical-Peak Band Edge measurement Appendix D Report No.: FR613001AO Page No. : 40 of 60 Modulation 11be EHT80_OFDMA Test Freq. (MHz) 7025 Polarization Vertical-Average Band Edge measurement Appendix D Report No.: FR613001AO Page No. : 41 of 60 Modulation 11be EHT160_OFDMA Test Freq. (MHz) 6025 Polarization Horizontal-Peak Band Edge measurement Appendix D Report No.: FR613001AO Page No. : 42 of 60 Modulation 11be EHT160_OFDMA Test Freq. (MHz) 6025 Polarization Horizontal-Average Band Edge measurement Appendix D Report No.: FR613001AO Page No. : 43 of 60 Modulation 11be EHT160_OFDMA Test Freq. (MHz) 6025 Polarization Vertical-Peak Band Edge measurement Appendix D Report No.: FR613001AO Page No. : 44 of 60 Modulation 11be EHT160_OFDMA Test Freq. (MHz) 6025 Polarization Vertical-Average Band Edge measurement Appendix D Report No.: FR613001AO Page No. : 45 of 60 Modulation 11be EHT160_OFDMA Test Freq. (MHz) 6985 Polarization Horizontal-Peak Band Edge measurement Appendix D Report No.: FR613001AO Page No. : 46 of 60 Modulation 11be EHT160_OFDMA Test Freq. (MHz) 6985 Polarization Horizontal-Average Band Edge measurement Appendix D Report No.: FR613001AO Page No. : 47 of 60 Modulation 11be EHT160_OFDMA Test Freq. (MHz) 6985 Polarization Vertical-Peak Band Edge measurement Appendix D Report No.: FR613001AO Page No. : 48 of 60 Modulation 11be EHT160_OFDMA Test Freq. (MHz) 6985 Polarization Vertical-Average Band Edge measurement Appendix D Report No.: FR613001AO Page No. : 49 of 60 Modulation 11be EHT320_OFDMA Test Freq. (MHz) 6105 Polarization Horizontal-Peak Band Edge measurement Appendix D Report No.: FR613001AO Page No. : 50 of 60 Modulation 11be EHT…

Text truncated - open the document above for the full version.

Report No.: FR613001CO Page : 1 of 12 Report Version: Rev. 01 FCC Co-Location Test Report FCC ID : MXF-WRTQ411BE Equipment : Wi-Fi 7 Tri-Band Router Model No. : WRTQ-411BE Brand Name : Gemtek Applicant : Gemtek Technology Co., Ltd. Address : No. 15-1 Zhonghua Road, Hsinchu Industrial Park, Hukou, Hsinchu, Taiwan, 30352. Standard : 47 CFR FCC Part 15.247 47 CFR FCC Part 15.407 Received Date : Jan. 30, 2026 Tested Date : Apr. 08 ~ Apr. 15, 2026 We, International Certification Corporation, would like to declare that the tested sample has been evaluated and in compliance with the requirement of the above standards. The test results contained in this report refer exclusively to the product. It shall not be reproduced except in full without the written approval of our laboratory. Reviewed by: Approved by: Along Chen / Manager Gary Chang / Manager Report No.: FR613001CO Page : 2 of 12 Report Version: Rev. 01 Table of Contents 1 GENERAL DESCRIPTION .................................................................................................................... 5 1.1 Information.............................................................................................................................................. 5 1.2 The Equipment List ................................................................................................................................ 6 1.3 Test Standards ....................................................................................................................................... 7 1.4 Reference Guidance .............................................................................................................................. 7 1.5 Deviation from Test Standard and Measurement Procedure ................................................................. 7 1.6 Measurement Uncertainty ...................................................................................................................... 7 2 TEST CONFIGURATION ....................................................................................................................... 8 2.1 Testing Facility ....................................................................................................................................... 8 2.2 The Worst Test Modes and Channel Details ......................................................................................... 8 3 TRANSMITTER TEST RESULTS ......................................................................................................... 9 3.1 Unwanted Emissions into Restricted Frequency Bands ........................................................................ 9 4 TEST LABORATORY INFORMATION ............................................................................................... 12 Appendix A. Unwanted Emissions Into Restricted Frequency Bands Report No.: FR613001CO Page : 3 of 12 Report Version: Rev. 01 Release Record Report No. Version Description Issued Date FR613001CO Rev. 01 Initial issue May 11, 2026 Report No.: FR613001CO Page : 4 of 12 Report Version: Rev. 01 Summary of Test Results FCC Rules Test Items Measured Result 15.247(d) 15.407(b) 15.209 Radiated Emissions [dBuV/m at 3m]: 45.52MHz 35.39 (Margin -4.61dB) - QP Pass Declaration of Conformity: The test results with all measurement uncertainty excluded are presented in accordance with the regulation limits or requirements declared by manufacturers. Comments and Explanations: The declared of product specification for EUT presented in the report are provided by the manufacturer, and the manufacturer takes all the responsibilities for the accuracy of product specification. Report No.: FR613001CO Page : 5 of 12 Report Version: Rev. 01 1 General Description 1.1 Information 1.1.1 Specification of the Equipment under Test (EUT) Operating Frequency 802.11b/g/n/ax/be: 2412 MHz ~ 2462 MHz 802.11a/n/ac/ax/be: 5180 MHz ~ 5240 MHz; 5260 MHz ~ 5320 MHz; 5500 MHz ~ 5700 MHz, 5745 ~ 5825 MHz 5925 MHz ~ 6425 MHz; 6425 MHz ~ 6525 MHz; 6525 MHz ~ 6875 MHz; 6875 MHz ~ 7125 MHz Modulation Type 802.11b: DSSS (DBPSK / DQPSK / CCK) 802.11a/g/n/ac/ax/be: OFDM (BPSK / QPSK / 16QAM / 64QAM / 256QAM / 1024QAM/ 4096QAM) 1.1.2 Antenna Details Model Type Connector Gain (dBi) 2.4G_ANT1 Dipole UFL 2.12 2.4G_ANT2 Dipole UFL 1.81 2.4G_ANT3 Dipole UFL 2.01 2.4G_ANT4 Dipole UFL 2.33 Ant. No. Model Type Connector Operating Frequencies (MHz) / Antenna Gain (dBi) 5150~5250 5250~5350 5470~5725 5725~5850 1 5G_ANT1 Dipole UFL 2.16 2.77 2.16 2.58 2 5G_ANT2 Dipole UFL 2.22 2.84 2.97 2.05 3 5G_ANT3 Dipole UFL 2.76 2.63 2.69 2.92 4 5G_ANT4 Dipole UFL 2.19 2.53 2.71 2.22 Model Type Connector Operating Frequencies (MHz) / Gain (dBi) 5925~6425 6425~6525 6525~6875 6875~7125 6G_ANT1 Dipole UFL 2.07 2.63 2.31 2.18 6G_ANT2 Dipole UFL 2.12 2.55 2.57 2.54 6G_ANT3 Dipole UFL 2.16 2.6 2.27 2.59 6G_ANT4 Dipole UFL 2.62 2.13 2.4 2.45 1.1.3 Power Supply Type of Equipment under Test (EUT) Power Supply Type 12Vdc from adapter Report No.: FR613001CO Page : 6 of 12 Report Version: Rev. 01 1.2 The Equipment List Test Item Radiated Emission Test Site 966 chamber1 / (03CH01-WS) Tested Date Apr. 08 ~ Apr. 15, 2026 Instrument Brand Model No. Serial No. Calibration Date Calibration Until Receiver R&S ESR3 101659 Apr. 17, 2025 Apr. 16, 2026 Spectrum Analyzer R&S FSV40 101498 Nov. 06, 2025 Nov. 05, 2026 Loop Antenna R&S HFH2-Z2 100330 Nov. 17, 2025 Nov. 16, 2026 Bilog Antenna SCHWARZBECK VULB9168 VULB9168-685 Jul. 04, 2025 Jul. 03, 2026 Horn Antenna 1G-18G SCHWARZBECK BBHA 9120 D BBHA 9120 D 1096 Dec. 19, 2025 Dec. 18, 2026 Horn Antenna 18G-40G SCHWARZBECK BBHA 9170 BBHA 9170517 Nov. 28, 2025 Nov. 27, 2026 Preamplifier EMC EMC02325 980225 Jun. 13, 2025 Jun. 12, 2026 Preamplifier EMC EMC118A45SE 980898 Jun. 24, 2025 Jun. 23, 2026 Preamplifier EMC EMC184045SE 980903 Aug. 08, 2025 Aug. 07, 2026 Loop Antenna Cable KOAX KABEL 101354-BW 101354-BW Oct. 01, 2025 Sep. 30, 2026 LF cable 3M Woken CFD…

Text truncated - open the document above for the full version.