N9R20120501678R/C CAR

changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help.

SANZUANSHENGYE TOYS FACTORY FENGXIN 1ND ROAD, CHENGHAI AREA SHANTOU CITY GUANGDONG CHINA Authority to Act as Agent Date: 25-06-2012 American Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern: SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b) , to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Expiration Date: 25-06-2013 By: ____ __SHUXIONG TAN_ _______ (Signature) (Print name) Title: ___Manager_______ On behalf of: SANZUANSHENGYE TOYS FACTORY (Company Name) Telephone: +86-75485870311

SANZUANSHENGYE TOYS FACTORY FENGXIN 1ND ROAD, CHENGHAI AREA SHANTOU CITY GUANGDONG CHINA Request for Confidentiality Date: 20-06-2012 Subject: Confidentiality Request for: FCC ID: N9R20120501678 Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 10, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Exhibit Short Term Permanent Block Diagrams Short Term External Photos Short Term Permanent* 1 Internal Photos Short Term Permanent Operation Description/Theory of Operation Short Term Permanent Parts List & Placement/BOM Short Term Permanent Tune-Up Procedure Short Term Permanent Schematics Short Term Test Setup Photos Short Term Permanent* User’s Manual *Note: ______(Insert Explanation as Necessary)______ R/C CAR has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of ___(specify number of days not to exceed 180 ) 2 ___ days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications: The applicant understands that until such time that IC distinguishes between Short Term and Permanent Confidentiality, either type of marked exhibit above will simply be marked Confidential when submitted to IC. Sincerely, By: _ ___ __SHUXIONG TAN_ _______ (Signature) (Print name) 1 - The asterisked items (*) require further justification before permanent confidentiality will be allowed. These also currently require review by the FCC under their Permit-But-Ask policy before the grant is issued and can delay completion of an application. Further justification should be added to the note above. One such example for a potted device would be: “The EUT is FULLY potted using a non-removable epoxy based material. Removal of potting material causes irreparable damage to internal circuitry. See photographs exhibits that outline the device before and after potting.” 2 - Please refer to http://acbcert.com/documents/misc-docs/Memo-Short-Term-Vs-Standard-Confidentiality.pdf for complete details.

1 Photographs - EUT Constructional Details Test model No.:3D-01

SIZE::LxW=6.5cm X 4cm FCC ID: N9R20120501678 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)this device may not cause harmful interference, and (2) this device mustaccept any interference received, including interference that may cause undesired operation.

1 Photographs - EUT Constructional Details Test model No.:3D-01

SGS-CSTC Standards Technical Services Ltd. No. 1 Workshop, M-10, Middle section, Science & Technology Park, Nanshan District, Shenzhen, Guangdong, China 518057 Telephone: +86 (0) 755 2601 2053 Fax: +86 (0) 755 2671 0594 Email: [email protected] Report No.: SZEM120600311601 Page: 1 of 26 Authorized Signature: Jack Zhang EMC Laboratory Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by SGS International Electrical Approvals in writing. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. All test results in this report can be traceable to National or International Standards. “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. ” 1 Cover page FCC REPORT Application No. : SZEM1206003116RF Applicant: SANZUANSHENGYE TOYS FACTORY Product Name: R/C CAR Model No.(EUT): 3D-01 Add Model No.: 3D-02, 3D-03, 3D-05, 3D-06, 3D-07, 3D-11, 3D-12, 3D-13, 3D-14, 3D-15, 3D-16, 3D-17, 3D-18, 3D-19, 3D-20, 3D-21, 3D-22, 3D-23, 3D-24, 3D-25, 3D-26, 3D-27, 3D-28, 3D-29, 3D-30, 3D-31, 3D-32, 3D-33, 3D-34, 3D-35, 3D-36, 3D-37, 3D-38, 3D-39, 3D-50, 3D-51, 3D-52, 3D-53, 3D-55, 3D-56, 3D-57, 3D-58, 3D-59, 3D-60, 3D-61, 3D-62, 3D-63, 3D-65, 3D-66 FCC ID: N9R20120501678 Standards: FCC CFR Title 47 Part 15C (2010) Date of Receipt: 2012-06-07 Date of Test: 2012-06-11 to 2012-06-21 Date of Issue: 2012-06-27 Test Result: PASS * * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Ltd. Report No.: SZEM120600311601 Page : 2 of 26 “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm . Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” 2 Test Summary Test Item Test Requirement Test method Result Antenna Requirement FCC CFR Title 47 Part 15C Section 15.203 ANSI C63.10 (2009) PASS Field Strength of the Fundamental Signal FCC CFR Title 47 Part 15C Section 15.249 (a) ANSI C63.10 (2009) PASS Spurious Emissions FCC CFR Title 47 Part 15C Section 15.249 (a)/15.209 ANSI C63.10 (2009) PASS Band edge (Radiated Emission) FCC CFR Title 47 Part 15C Section 15.249(a)/15.205 ANSI C63.10 (2009) PASS 20dB Occupied Bandwidth FCC CFR Title 47 Part 15C Section 15.215 (c) ANSI C63.10 (2009) PASS Remark: Model No.: 3D-01, 3D-02, 3D-03, 3D-05, 3D-06, 3D-07, 3D-11, 3D-12, 3D-13, 3D-14, 3D-15, 3D-16, 3D-17, 3D-18, 3D-19, 3D-20, 3D-21, 3D-22, 3D-23,3D-24, 3D-25, 3D-26, 3D-27, 3D-28, 3D-29, 3D-30, 3D-31, 3D-32, 3D-33, 3D-34, 3D-35, 3D-36, 3D-37, 3D-38, 3D-39, 3D-50, 3D-51, 3D-52, 3D-53, 3D-55, 3D-56, 3D-57, 3D-58, 3D-59, 3D-60, 3D-61, 3D-62, 3D-63, 3D-65, 3D-66 Only the Model No. 3D-01 was tested, since the electrical circuit design, layout, components used and internal wiring were identical for all above models. Only different on color of appearance, packaging and model number. SGS-CSTC Standards Technical Services Ltd. Report No.: SZEM120600311601 Page : 3 of 26 “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.s…

Text truncated - open the document above for the full version.

1 Photographs - EUT Test Setup (Test model No.:3D-01) 1.1 Radiated Emission