NCE5141U155 Mbps ATM Adapter Card

SARWIN II SUITE OF APPLICATIONS PRELIMINARY USERS MANUAL MARCH 22, 1999 IDT Powering What’s Next ConfidentialPage 206/21/01 Chapter 1 Introduction ................................................................................................................................ 3 1.1 Driver Application Programming Interface ......................................................................................... 3 1.2 Driver Parameters ................................................................................................................................ 4 1.2.1 IDT77252 Revision 01................................................................................................................... 4 1.2.2 IDT77252 Revision 02................................................................................................................... 4 1.2.3 IDT77222 Revision 02................................................................................................................... 4 1.3 Software Installation............................................................................................................................. 5 1.4 Driver Installation ................................................................................................................................ 5 1.4.1 Driver Installation – Windows 95 .................................................................................................. 6 1.4.2 Driver Installation – Windows NT 4.0 .......................................................................................... 7 Chapter 2 SARWINII Suite of Applications ............................................................................................ 12 2.1 Abrsar_reg.exe – Internal Register Access of the ABRSAR................................................................ 12 2.1.1 Abrsar_reg – Register Access ...................................................................................................... 13 Abrsar_reg – PHY Access .................................................................................................................... 14 2.1.3 Abrsar_reg – Utility Bus Access.................................................................................................. 15 2.1.4 Abrsar_reg – PCI Configuration Access...................................................................................... 15 2.2 Abrsar_sram.exe – SRAM access application .................................................................................... 17 2.2.1 Abrsar_sram – SRAM Access ..................................................................................................... 18 2.2.2 Abrsar_sram – Transmit Connection Table Access ..................................................................... 18 Abrsar_sram – Receive Connection Table Access ............................................................................... 19 2.2.3 Abrsar_sram – Static Schedule Table(SST) Access .................................................................... 20 2.2.4 Abrsar_sram – Receive FIFO Access .......................................................................................... 20 2.3 Drvtest.exe - Demonstrate Driver Functionality ................................................................................ 22 2.3.1 Drvtest – Open Connection.......................................................................................................... 24 2.3.2 Drvtest – Fetch Connection ......................................................................................................... 25 2.3.3 Drvtest – Query Connection ........................................................................................................ 26 2.3.4 Drvtest – Send Data ..................................................................................................................... 27 2.3.5 Drvtest – Receive Data ................................................................................................................ 28 2.3.6 Drvtest – Get PCI Configuration ................................................................................................. 30 2.3.7 Drvtest – Get Device Information................................................................................................ 31 2.4 Cellgen.exe – Generate Cell Traffic ................................................................................................... 32 2.5 Cellrecv.exe - Receive Cell Traffic ..................................................................................................... 33 2.6 ATMMON.exe ATM Connection Monitor ...........................................................................................34 APPENDIX A IDT77252ioctl.h ................................................................................................................ 35 ConfidentialPage 306/21/01 Chapter 1 Introduction The purpose of this manual is to introduce the Windows 95/NT drivers and SARWIN II suite of applications for the IDT77252/IDT77222 ABR SAR.. Figure 1.0 shows where the driver and applications fit into the overall system environment. Application API Figure 1.0 At the application level; applications can be developed that will act as traffic generators, diagnostics, timing analysis, statistical analysis, class of service selection and custom applications to deal with a particular application. An application that runs on 95 will work on NT and the other way around. The driver presents the same interface in either Windows environment. 1.1 Driver Application Programming Interface The driver provides the following device i/o control calls to the application interface • Open Connection • Close Connection • Read IDT77252/IDT77222 Internal Register • Write IDT77252/IDT77222 Internal Register • Read Utility Bus • Write Utility Bus • Read SRAM • Write SRAM • Retrieve List of Open Connections • Query Connection Parameters • Write Data to Connection • Read Data from…

Text truncated - open the document above for the full version.

Title:PLI Evaluation Report (RFI) Addendum FCC ID: NCE5141U Page 1 of 1 Drawing:Q514103FCCW.DWG Issued: 15 Apr 1999 By:Greg NollApproved: Lee Pulver Pulver Laboratories Inc. 320 North Santa Cruz Avenue Los Gatos, California 95030-7243 Telephone: 408.399.7000 Facsimile: 408.399.7001 www.pulverlabs.com Block Diagram of Equipment Under Test (EUT) Showing Clock Oscillators and Frequencies of Operation Crystal Oscillator U2 19.44 MHz Crystal Oscillator U3 80.00 MHz Use this diagram to simplify locating the oscillators in the accompanying schematics.

1 ©1999 Integrated Device Technology, Inc. JUNE 1999 DSC-3761/- Functional Block Diagram Features: uu uu u Complete 155Mbps PCI-bus ATM Network Interface Card uu uu u Supports 33MHz, 32-bit PCI bus uu uu u 155Mbps Multimode fiber optical interface (7M924) uu uu u 155Mbps UTP-5 PHY interface (7M925) uu uu u Capable of supporting up to 16K receive connections uu uu u Supports tens of thousands of transmit connections uu uu u E 2 PROM layout for Sub-vendor ID uu uu u Small Form Factor: 2.5 x 6 inches uu uu u "SARWIN" software evaluation program available for Windows 3.1™ uu uu u Third Party Software available: – Harris & Jefferies Novel Netware™ Drivers 888 Washington Street, Dedham, Massachusetts, 02026 (617) 329-3200 (phone) (617) 329-4148 (FAX) [email protected] – Advancenet Systems Inc. Windows NT™ and Windows 95™ Drivers Description The IDT7M924/25 provides reliable, high performance Asychronous Transfer Mode connectivity for PCI Card Edge based systems. The IDT7M924 provides a fiber media physical (PHY) interface; the 7M925 supports Unshielded Twisted Pair, Category 5 (UTP-5) cabling. Other- wise identical, they both feature complete PCI-bus ATM NIC functionality, plugging directly into PCI bus expansion slots. COMPATIBILITY AND CONFIGURATION The board is designed for use in PCI systems, which may include PC compatibles, MIPS, Alpha, Windows NT systems, and PowerPC Macintosh systems. The IDT7M924/25 supports the 32 bit, 33 MHz, 5V PCI spec, although this also permits operation in a 64-bit, 33 MHz, 5V. PCI slot. 155Mbps ATM Network Interface Card (NIC) in PCI Card Edge Form Factor PRELIMINARY IDT7M924 IDT7M925 406 Timbermill Rd., Durham, North Carolina 27713 (919) 544-5601 (phone) (919) 544-4601 (FAX) [email protected] or 75141,[email protected] 5V 33-MHz 32-bit PCI Bus RJ-45 Connector and Magnetics IDT 77155 SwitchSTAR PHY IDT 77252 NICStAR SAR SRAM 80MHz OSC ATM Network 3761 drw 01 E 2 PROM 19MHz OSC Optical Data Link (ODL) Fiber Interface) 7M924 only 7M925 only OVERVIEW The heart of the board is the IDT 77252 ABR NICStAR™ Segmentation And Reassembly (SAR) controller. The IDT77252 ABR SAR connects directly to the PCI bus, a private SRAM/EPROM bus, and the Utopia PHY interface. The PHY device is an IDT77155 PHY. The PHY device connects in turn to an AMP 269039-1 optical data link (ODL) device for the fiber optic connection (IDT7M924), or to a Pulse Engineering PE- 68532 transciever for the UTP-5 connection (IDT7M925). The ODL incorporates its own fiber optic connectors; the UTP option includes a line interface/filter transformer and a standard RJ-45 jack.

Title:PLI Evaluation Report (RFI) Addendum FCC ID: NCE5141U Page 1 of 2 Drawing:Q514103FCCW.DWG Issued: 15 Apr 1999 By:Greg NollApproved: Lee Pulver Pulver Laboratories Inc. 320 North Santa Cruz Avenue Los Gatos, California 95030-7243 Telephone: 408.399.7000 Facsimile: 408.399.7001 www.pulverlabs.com FCC Label Illustration 1.0 on the next page illustrates the actual FCC label (three times the actual size) with the appropriate wording. Note the letters "EMI" on the label which abbreviate "Electromagnetic Interference". Organizations like the Federal Communications Commission and their respective limits are listed on the label. Also notice the letters "NRTL", which abbreviate "Nationally Recognized Testing Laboratory" as recommended by OSHA and the National Electrical Code for the United States. For Pulver Laboratories product Certification labels used for safety Certification, the phrase "SAFETY" appears on the label. Safety Certifying organizations like Pulver Laboratories are listed on the label adjacent to the testing standards used during equipment evaluation. A rough sketch of the label location is shown below. Circuit side of EUT Label Title:PLI Evaluation Report (RFI) Addendum FCC ID: NCE5141U Page 2 of 2 Drawing:Q514103FCCW.DWG Issued: 15 Apr 1999 By:Greg NollApproved: Lee Pulver Pulver Laboratories Inc. 320 North Santa Cruz Avenue Los Gatos, California 95030-7243 Telephone: 408.399.7000 Facsimile: 408.399.7001 www.pulverlabs.com Illustration 1.0 {three times the size of actual FCC Label} Label Integrated Device Technology, Inc. FCC ID: NCE5141U This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1)This device may not cause harmful interference, and (2) This device must accept any interference Received, including interference that may cause undesired operation. This Product Certified to meet the Standards in the Categories listed on this label by PLI Pulver Laboratories NRTL Control Number 5141X Information Technology Equipment EMI: FCC Part 15 Class B

Title:PLI Evaluation Report (RFI) FCC ID: NCE5141U Page 1 of 46 Drawing:Q514103FCCW.DWG Issued: 15 Apr 1999 By:Greg NollApproved: Lee Pulver Pulver Laboratories Inc. 320 North Santa Cruz Avenue Los Gatos, California 95030-7243 Telephone: 408.399.7000 Facsimile: 408.399.7001 www.pulverlabs.com This drawing consists of pages issued or re-issued on dates shown in the following list. Italic underlined words indicate content changes or additions on revised pages. PAGEISSUED 1 - 4615 Apr 1999 COMPANY CONFIDENTIAL This report is the property of Pulver Laboratories Inc. The information contained in this report can only be divulged to persons authorized by Pulver Laboratories Inc. Portions of this report contain information proprietary to Integrated Device Technology, Inc.; other portions of this report contain information proprietary to Pulver Laboratories and the RFI Controls Company. Except for agencies like the Federal Communications Commission, companies must sign Non-Use and Non-Disclosure Agreements before authorized to read this report. All rights reserved. No part of this report may be reproduced or transmitted in any form or by any means without permission in writing from Pulver Laboratories Inc. Copyright 1983 - 1999 Pulver Laboratories Inc. PLI223F11W.FRMx1 Q514103W.DWG Title:PLI Evaluation Report (RFI) FCC ID: NCE5141U Page 2 of 46 Drawing:Q514103FCCW.DWG Issued: 15 Apr 1999 By:Greg NollApproved: Lee Pulver Pulver Laboratories Inc. 320 North Santa Cruz Avenue Los Gatos, California 95030-7243 Telephone: 408.399.7000 Facsimile: 408.399.7001 www.pulverlabs.com TABLE OF CONTENTS PageSectionDescription 10.0Drawing; Client; Product; Standards 51.0Engineering Considerations 1.1 General Engineering Considerations 1.1.11 October 1998 FCC Conformance Statement 61.2Specific Engineering Considerations 1.3Product Description and Intended Use 71.4Abbreviated List of Photographs 81.5Equipment Used During Measurements 162.0Mandatory Labeling, Manual Information, and Shipping Documents 2.1FCC Label 17Illustration 1.0: FCC Label 182.2Operators’ Manual Information 2.3FCC User Information 20Photographs 32Clock Oscillators 33EUT Orientation 343.0Radiated Electromagnetic Interference - Test Configuration 374.0Radiated EMI - Results 415.0Conducted EMI -Test Configuration 6.0Conducted EMI - Results 45FCC Conducted Graphs 46Last Page of Report Certificate of Conformance Title:PLI Evaluation Report (RFI) FCC ID: NCE5141U Page 3 of 46 Drawing:Q514103FCCW.DWG Issued: 15 Apr 1999 By:Greg NollApproved: Lee Pulver Pulver Laboratories Inc. 320 North Santa Cruz Avenue Los Gatos, California 95030-7243 Telephone: 408.399.7000 Facsimile: 408.399.7001 www.pulverlabs.com Pulver Laboratories File Number:5141 Pulver Laboratories Project Number:C1029 Product Names:EUT ) 155 Mbps ATM Adapter Card (EUT = Equipment Under Test) Model Numbers:7M925 Serial Numbers: 00E0CF003A20 Applicant:Integrated Device Technology, Inc. 2975 Stender Way Santa Clara, California 95054 Telephone: 800.345.7015 Facsimile:408.492.8674 Website:www.idt.com Location Certified:Integrated Device Technology, Inc. 2975 Stender Way Santa Clara, California 95054 Telephone: 800.345.7015 Facsimile:408.492.8674 Website:www.idt.com Manufacturing Location:Integrated Device Technology, Inc. 2975 Stender Way Santa Clara, California 95054 Telephone: 800.345.7015 Facsimile:408.492.8674 Website:www.idt.com Pulver Laboratories Control Number:5141X Equipment Category Information Technology Equipment including Electrical Business Equipment Title:PLI Evaluation Report (RFI) FCC ID: NCE5141U Page 4 of 46 Drawing:Q514103FCCW.DWG Issued: 15 Apr 1999 By:Greg NollApproved: Lee Pulver Pulver Laboratories Inc. 320 North Santa Cruz Avenue Los Gatos, California 95030-7243 Telephone: 408.399.7000 Facsimile: 408.399.7001 www.pulverlabs.com Evaluated to the Following Standards Federal Communications Commission (FCC, USA) Category Classification Class B - Residential FCC ID: NCE5141U • American National Standards Institute C63.4-1992 entitled Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz. • Federal Communications Commission Rules and Regulations located in the Code of Federal Regulations, Title 47, Part 2 entitled Frequency Allocations and Radio Treaty Matters; General Rules and Regulations; and Part 15 entitled Radio Frequency Devices, 1 October 1998 Edition. Trademarks All trademarks and registered trademarks shown or mentioned in this Pulver Laboratories Product Evaluation Report belong to their respective holders. Title:PLI Evaluation Report (RFI) FCC ID: NCE5141U Page 5 of 46 Drawing:Q514103FCCW.DWG Issued: 15 Apr 1999 By:Greg NollApproved: Lee Pulver Pulver Laboratories Inc. 320 North Santa Cruz Avenue Los Gatos, California 95030-7243 Telephone: 408.399.7000 Facsimile: 408.399.7001 www.pulverlabs.com 1.0 Engineering Considerations 1.1 General Engineering Considerations 1.1.1 This report deals with conformance to the: • Code of Federal Regulations, 47 CFR, Part 2 and Part 15, revised 1 October 1998; • American National Standards Institute standard number C63.4- 1992 entitled Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz. 1.1.2 This report also deals with conformance to Radio Frequency Interference Suppression of High Frequency Equipment for Industrial, Scientific, and Medical (ISM) and similar purposes for Canada and the countries listed in the Pulver Laboratories Certificate of Conformance associated with this report. 1.1.3 To assist the Federal Communications Commission in the continuing education of applicants and grantees, Pulver Laboratories has advised Integrated Device Technology, Inc. to purchase a copy of the Rules and Regulations located in the Code of Federal Regulations, Title 47, Part 2 entitled Frequency Allocations and Radio Treaty Matters; General Rules and Regulations; and Part 15 entitled Rad…

Text truncated - open the document above for the full version.