NKR-DFCNH1NFC MODULE

USER MANUAL DFCN-H1 NFC MOUDULE USER MANUAL & Operational description USER MANUAL I. Introduction DFCN-H1 is a kind of NFC (Near Field Communication) module that could be embedded in one IT system by simply connecting the module to his target microcontroller and start developing his application software. II. DESIGN REFERENCE DFCN-H1 reference design module consists of the following: • Reference Design: When the user wishes to incorporate the DFCN-H1 to their device, it is strongly recommended that this reference design is copied “as is” in the final application board to guarantee optimum performance, regulatory compliance and lowest development time and design effort. • MCU FPC/FFC Connector: Allow user to connect the DFCN-H1 module to the host board via FPC/FFC connector. • Antenna Connector: Connect to FPC antenna. USER MANUAL III. FEATURE  Contactless protocols: • ISO14443 A/B • ISO15693 • ISO18092  Contactless transmission of data and RF energy  Peer-to-peer communication  Card emulation  NFC card reader/writer  Programmable receiver sensitivity  Carrier frequency: 13.56 MHz  RF Field detection  Single ended external antenna connection IV. Operation Conditions Supply voltage  AC mains  DC Type of DC Source  Internal DC supply  External DC adapter  Battery Operational Climatic  Tnom (20°C)  Tmax (55°C)  Tnim (-20°C) V. Assembly Guideline USER MANUAL VI. MECHANICAL DIMENSION VII. Certifications and Regulatory Item Feature Description 6.1 FCC RF: FCC part 15C EMI: FCC part 15B FCC grant: TCB Filing fee 6.2 CE RF: EN302291 Class B EMC: EN301489-1/-3 Safety: EN 60950-1:2006/A11:2009 6.3 IC RSS-210 ISSUE 8 RSS-GEN ISSUUE 3 General: This modular approval is limited to OEM/Integrators installation only. OEM integrators are responsible for ensuring that the end-user has no manual instructions to remove or install module. USER MANUAL End Product Labeling (FCC) When the module is installed in the host device, the FCC ID label must be visible through a window on the final device or it must be visible when an access panel, door or cover is easily re-moved. If not, a second label must be placed on the outside of the final device that contains the following text: “Contains FCC ID: NKR-DFCNH1”. The grantee's FCC ID can be used only when all FCC compliance requirements are met. Required FCC Compliance Statement for Host Integration To integrate this module into the host, the host manufacturer is responsible for the applicable FCC rules, including the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. In the user manual of the host device, the following statements are required to be included.  This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.  This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: –Reorient or relocate the receiving antenna. –Increase the separation between the equipment and receiver. –Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. –Consult the dealer or an experienced radio/TV technician for help.  Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment. FCC Module Integration Restriction: This module has been certified by FCC as single module approval with the following restrictions: 1. The Loop antenna was verified in the conformity testing, and for compliance the antenna shall not be modified. A separate approval is required for all other operating configurations, including different antenna configurations. 2. If any other simultaneous transmission radio is installed in the host platform together with this module, or above restrictions cannot be kept, a separate RF exposure assessment and FCC equipment authorization is required. USER MANUAL End Product Labeling (IC) Labeling Requirements for the Host Device (from Section 3.2.1, RSS-Gen, Issue 3, December 2010): The host device shall be properly labeled to identify the module within the host device. The Industry Canada certification label of a module shall be clearly visible at all times when installed in the host device, otherwise the host device must be labeled to display the Industry Canada certification number of the module, preceded by the words ―Contains transmitter module, or the word ―Contains, or similar wording expressing the same meaning, as follows: "Contains transmitter module IC: 4441A-DFCNH1 ". Required IC Compliance Statement for Host Integration To integrate this module into the host, the host manufacturer is responsible for the applicable Industry Canada rules, including the limits for a Class B digital device, pursuant to ICES-003 of the Industry Canada Rules In the user manual of the host device, the following statements are required to be included.  This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interfer…

Text truncated - open the document above for the full version.

Date: April 30, 2013 Power of Attorney To whom it may concern, Please be notified that I, Troy Chien, have designated Jones Tsai in Sporton International Inc. as the person being responsible for this project and to sign the form 731 and other documentation. Any and all acts carried out by Jones Tsai in Sporton International Inc. on the matters of relating to all processes required in the FCC approval and any communication needed with the national authority, shall have the same legal authority as acts on our own behalf. We further certifies that neither the applicant nor any party to this application, as defined in 47 CFR Ch. 1.2002 (b), is subject to a denial to Federal benefits, that include FCC benefits, pursuant to section 5301 of the Anti-Drug Abuse Act of 1998, 21 U.S.C. 835(a). This authorization is limited to the product of as following: FCC ID: NKR-DFCNH1 If you have any acknowledgement and response, please send it to Sporton International Inc. directly. Should you have any questions or comments regarding this matter, please have my best attention. This authorization shall expire six months from the original date. If you have any questions regarding the authorization, please don’t hesitate to contact us. Thank you! Signature : _________________________________ Name and Job Title. : Troy Chien / Associate Technical Director E-mail : [email protected] Tel. : 886-3-666-7799 Ex 6361

1/1 Date: April 30, 2013 Federal Communications Commission Authorization and Evaluation Division RE : Certification Application FCC ID : NKR-DFCNH1 To Whom It May Concern, Pursuant to sections 0.457 and 0.459 of CFR 47 and to avoid premature release of sensitive information prior to marketing or release of the product to the public, the applicant requests the following documents contained in this certification application be temporarily withheld from public disclosure for an initial period of 180 days:  External Photos  Internal Photos  Test Setup Photos  User Manual The application contains technical information, which Wistron NeWeb Corporation deems to be trade secrets and proprietary. If made public, the information might be used to the disadvantage of the applicant in the market place. Sincerely, Signature : _________________________________ Name and Job Title. : Troy Chien / Associate Technical Director E-mail : [email protected] Tel. : 886-3-666-7799 Ex 6361

Photographs of EUT Report No.: EP340211 Brand Name: WNC / Model Name: DFCN-H1 SPORTON INTERNATIONAL INC. Page Number : 1 of 6 TEL : 886-3-327-3456 Report Issued Date : Apr. 29, 2013 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : NKR-DFCNH1 IC : 4441A-DFCNH1 1. External Photograph of EUT Photographs of EUT Report No.: EP340211 Brand Name: WNC / Model Name: DFCN-H1 SPORTON INTERNATIONAL INC. Page Number : 2 of 6 TEL : 886-3-327-3456 Report Issued Date : Apr. 29, 2013 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : NKR-DFCNH1 IC : 4441A-DFCNH1 720510

Front of the DUT Shielding Label Location

Photographs of EUT Report No.: EP340211 Brand Name: WNC / Model Name: DFCN-H1 SPORTON INTERNATIONAL INC. Page Number : 3 of 6 TEL : 886-3-327-3456 Report Issued Date : Apr. 29, 2013 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : NKR-DFCNH1 IC : 4441A-DFCNH1 2. Internal Photograph of EUT Photographs of EUT Report No.: EP340211 Brand Name: WNC / Model Name: DFCN-H1 SPORTON INTERNATIONAL INC. Page Number : 4 of 6 TEL : 886-3-327-3456 Report Issued Date : Apr. 29, 2013 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : NKR-DFCNH1 IC : 4441A-DFCNH1 Photographs of EUT Report No.: EP340211 Brand Name: WNC / Model Name: DFCN-H1 SPORTON INTERNATIONAL INC. Page Number : 5 of 6 TEL : 886-3-327-3456 Report Issued Date : Apr. 29, 2013 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : NKR-DFCNH1 IC : 4441A-DFCNH1 NFC Antenna (for test only) Photographs of EUT Report No.: EP340211 Brand Name: WNC / Model Name: DFCN-H1 SPORTON INTERNATIONAL INC. Page Number : 6 of 6 TEL : 886-3-327-3456 Report Issued Date : Apr. 29, 2013 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : NKR-DFCNH1 IC : 4441A-DFCNH1 720510

SPORTON INTERNATIONAL INC. Report Format Version: a FCC TEST REPORT Report No. : FR340211 FCC RADIO TEST REPORT according to 47 CFR FCC Part 15 Subpart C § 15.225 Equipment : NFC Module Brand Name : WNC Model No. : DFCN-H1 Filing Type : New Application Applicant : Wistron NeWeb Corporation 20 Park Avenue II, Hsinchu Science Park, Hsinchu 308,Taiwan,R.O.C. FCC ID : NKR-DFCNH1 Manufacturer Wistron NeWeb Corporation 20 Park Avenue II, Hsinchu Science Park, Hsinchu 308,Taiwan,R.O.C. Received Date : Apr. 02, 2013 Final Test Date : Apr. 27, 2013 Statement The test result in this report refers exclusively to the presented test model / sample. Without written approval of SPORTON International Inc., the test report shall not be reproduced except in full. The measurements and test results shown in this test report were made in accordance with the procedures and found in compliance with the limit given in ANSI C63.4-2003 and ANSI C63.10-2009 and 47 CFR FCC Part 15 Subpart C. The test equipment used to perform the test is calibrated and traceable to NML/ROC. SPORTON INTERNATIONAL INC. No. 52, Hwa Ya 1 st Rd., Hwa Ya Technology Park, Kwei-Shan Hsiang, Tao Yuan Hsien, Taiwan, R.O.C. SPORTON INTERNATIONAL INC. Page No. : i of ii TEL : 886-3-327-3456 Issued Date : Apr. 29, 2013 FAX : 886-3-328-4978 FCC ID : NKR-DFCNH1 FCC TEST REPORT Report No. : FR340211 Table of Contents 1. SUMMARY OF THE TEST RESULT ....................................................................................................................... 2 2. GENERAL INFORMATION ...................................................................................................................................... 3 2.1 Product Details ................................................................................................................................................................ 3 2.2 Table for Test Modes ....................................................................................................................................................... 3 2.3 Table for Testing Locations ............................................................................................................................................. 4 2.4 Table for Supporting Units............................................................................................................................................... 4 2.5 Test Mode ....................................................................................................................................................................... 4 2.6 Test Configurations ......................................................................................................................................................... 5 3. TEST RESULT ......................................................................................................................................................... 6 3.1 AC Power Line Conducted Emissions Measurement.......................................................................................................... 6 3.2 Field Strength of Fundamental Emissions and Mask Measurement ................................................................................. 11 3.3 20dB Spectrum Bandwidth Measurement ....................................................................................................................... 15 3.4 Radiated Emissions Measurement .................................................................................................................................. 17 3.5 Frequency Stability Measurement .................................................................................................................................. 24 3.6 Antenna Requirements .................................................................................................................................................. 27 4. LIST OF MEASURING EQUIPMENT .................................................................................................................... 28 5. TEST LOCATION ................................................................................................................................................... 29 6. TAF CERTIFICATE OF ACCREDITATION ........................................................................................................... 30 APPENDIX A. PHOTOGRAPHS OF EUT APPENDIX B. SETUP PHOTOGRAPHS SPORTON INTERNATIONAL INC. Page No. : ii of ii TEL : 886-3-327-3456 Issued Date : Apr. 29, 2013 FAX : 886-3-328-4978 FCC ID : NKR-DFCNH1 FCC TEST REPORT Report No. : FR340211 REVISION HISTORY REPORT NO. VERSION DESCRIPTION ISSUED DATE FR340211 Rev. 01 Initial issue of report Apr. 29, 2013 SPORTON INTERNATIONAL INC. Report Format Version: a FCC TEST REPORT Report No. : FR340211 CERTIFICATE OF COMPLIANCE according to 47 CFR FCC Part 15 Subpart C § 15.225 Equipment : NFC Module Brand Name : WNC Model No. : DFCN-H1 Applicant : Wistron NeWeb Corporation 20 Park Avenue II, Hsinchu Science Park, Hsinchu 308,Taiwan,R.O.C. Sporton International as requested by the applicant to evaluate the EMC performance of the product sample received on Apr. 02, 2013 would like to declare that the tested sample has been evaluated and found to be in compliance with the tested rule parts. The data recorded as well as the test configuration specified is true and accurate for showing the sample’s EMC nature. Reviewed by: Joseph Lin / Supervisor Approved by: Jones Tsai / Manager SPORTON INTERNATIONAL INC. No. 52, Hwa Ya 1 st Rd., Hwa Ya Technology Park, Kwei-Shan Hsiang, Tao Yuan Hsien, Taiwan, R.O.C. SPORTON INTERNATIONAL INC. Page Number : 2 of 30 TEL : 886-3-327-3456 Report Issued Date : Apr. 29, 2013 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : NKR-DFCNH1 FCC RF Test Report Report No. : FR340211 1. SUMMARY OF THE TEST RESULT Applied Standard: 47 CFR FCC Part 15 Subpart C Part FCC Rule IC Rule Description of Test Result Under Limit 3.1 1…

Text truncated - open the document above for the full version.

SPORTON INTERNATIONAL INC. Page Number : B1 of B2 TEL : 886-3-327-3456 Report Issued Date : Apr. 29, 2013 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : NKR-DFCNH1 FCC RF Test Report Report No. : FR340211 Appendix B. Setup Photographs <Conducted Emission> Mode 1 SPORTON INTERNATIONAL INC. Page Number : B2 of B2 TEL : 886-3-327-3456 Report Issued Date : Apr. 29, 2013 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : NKR-DFCNH1 FCC RF Test Report Report No. : FR340211 <Radiated Emission> Mode 1 From 9KHz~30MHz From 30MHz~1GHz